From c819bbd5eca29aa0d4f35612b7c795c23d38efc3 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 26 Jul 2012 02:31:09 +0000 Subject: [PATCH] e1000: configure and read MDI settings This is the implementation in e1000 to allow ethtool to force MDI state, allowing users to work around some improperly behaving switches. Forcing in this driver is for now only allowed when auto-neg is enabled. To use must have the matching version of ethtool app that supports this functionality. Signed-off-by: Jesse Brandeburg CC: Tushar Dave Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/e1000/e1000_ethtool.c | 39 +++++++++++++++++++ drivers/net/ethernet/intel/e1000/e1000_main.c | 4 ++ 2 files changed, 43 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 736a7d987db5..9089d00f1421 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -174,6 +174,20 @@ static int e1000_get_settings(struct net_device *netdev, ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) || hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + + /* MDI-X => 1; MDI => 0 */ + if ((hw->media_type == e1000_media_type_copper) && + netif_carrier_ok(netdev)) + ecmd->eth_tp_mdix = (!!adapter->phy_info.mdix_mode ? + ETH_TP_MDI_X : + ETH_TP_MDI); + else + ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + + if (hw->mdix == AUTO_ALL_MODES) + ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; + else + ecmd->eth_tp_mdix_ctrl = hw->mdix; return 0; } @@ -183,6 +197,22 @@ static int e1000_set_settings(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + /* + * MDI setting is only allowed when autoneg enabled because + * some hardware doesn't allow MDI setting when speed or + * duplex is forced. + */ + if (ecmd->eth_tp_mdix_ctrl) { + if (hw->media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && + (ecmd->autoneg != AUTONEG_ENABLE)) { + e_err(drv, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); + return -EINVAL; + } + } + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) msleep(1); @@ -199,12 +229,21 @@ static int e1000_set_settings(struct net_device *netdev, ecmd->advertising = hw->autoneg_advertised; } else { u32 speed = ethtool_cmd_speed(ecmd); + /* calling this overrides forced MDI setting */ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { clear_bit(__E1000_RESETTING, &adapter->flags); return -EINVAL; } } + /* MDI-X => 2; MDI => 1; Auto => 3 */ + if (ecmd->eth_tp_mdix_ctrl) { + if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) + hw->mdix = AUTO_ALL_MODES; + else + hw->mdix = ecmd->eth_tp_mdix_ctrl; + } + /* reset the link */ if (netif_running(adapter->netdev)) { diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 3bfbb8df8989..0ae2fcfa5124 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -4939,6 +4939,10 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) default: goto err_inval; } + + /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ + hw->mdix = AUTO_ALL_MODES; + return 0; err_inval: -- 2.39.5