From c8cc1b727f989a46cb8823ae3c152b7e69aed028 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Tue, 23 Feb 2016 17:11:42 +0100 Subject: [PATCH] ARM: dts: stm32429i-eval: Add USB HS host mode support This patch adds USB HS support in host mode only. This port supports OTG mode, but the device more is not working properly as of now. Once the device mode fixed, the node will be updated to support OTG. Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stm32429i-eval.dts | 16 +++++++++++++++ arch/arm/boot/dts/stm32f429.dtsi | 30 ++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 1ae57fad12d3..76a10d3b0e05 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -81,6 +81,13 @@ gpios = <&gpiog 12 1>; }; }; + + usbotg_hs_phy: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 30>; + clock-names = "main_clk"; + }; }; &clk_hse { @@ -92,3 +99,12 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 598362efaf01..ee8275645127 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -278,6 +278,26 @@ bias-disable; }; }; + + usbotg_hs_pins_a: usbotg_hs@0 { + pins { + pinmux = , + , + , + , + , + , + , + , + , + , + , + ; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; }; rcc: rcc@40023810 { @@ -318,6 +338,16 @@ st,mem2mem; }; + usbotg_hs: usb@40040000 { + compatible = "snps,dwc2"; + dma-ranges; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 29>; + clock-names = "otg"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; -- 2.39.5