From caf970e09c42843eb3b8456fc0e815f9b5385873 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Apr 2006 11:29:13 -0300 Subject: [PATCH] V4L/DVB (3796): Add several debug messages to cx24123 code Current debug messages at cx24123 are next to useless, since they don't print the values sent/read to registers. With this patch, debug=1 will show comprehensive messages. debug=2 will show also read/write operations at I2C bus. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Andrew de Quincey --- drivers/media/dvb/frontends/cx24123.c | 54 +++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index e430e6a5083..115ec169b64 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -225,6 +225,10 @@ static int cx24123_writereg(struct cx24123_state* state, int reg, int data) struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; int err; + if (debug>1) + printk("cx24123: %s: write reg 0x%02x, value 0x%02x\n", + __FUNCTION__,reg, data); + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { printk("%s: writereg error(err == %i, reg == 0x%02x," " data == 0x%02x)\n", __FUNCTION__, err, reg, data); @@ -241,6 +245,10 @@ static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data) struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 }; int err; + if (debug>1) + printk("cx24123: %s: writeln addr=0x08, reg 0x%02x, value 0x%02x\n", + __FUNCTION__,reg, data); + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { printk("%s: writelnbreg error (err == %i, reg == 0x%02x," " data == 0x%02x)\n", __FUNCTION__, err, reg, data); @@ -270,6 +278,9 @@ static int cx24123_readreg(struct cx24123_state* state, u8 reg) return ret; } + if (debug>1) + printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret); + return b1[0]; } @@ -282,14 +293,17 @@ static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_invers { switch (inversion) { case INVERSION_OFF: + dprintk("%s: inversion off\n",__FUNCTION__); cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f); cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80); break; case INVERSION_ON: + dprintk("%s: inversion on\n",__FUNCTION__); cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80); cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80); break; case INVERSION_AUTO: + dprintk("%s: inversion auto\n",__FUNCTION__); cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f); break; default: @@ -305,10 +319,13 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers val = cx24123_readreg(state, 0x1b) >> 7; - if (val == 0) + if (val == 0) { + dprintk("%s: read inversion off\n",__FUNCTION__); *inversion = INVERSION_OFF; - else + } else { + dprintk("%s: read inversion on\n",__FUNCTION__); *inversion = INVERSION_ON; + } return 0; } @@ -321,18 +338,25 @@ static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) /* Hardware has 5/11 and 3/5 but are never unused */ switch (fec) { case FEC_NONE: + dprintk("%s: set FEC to none\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0x01); case FEC_1_2: + dprintk("%s: set FEC to 1/2\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0x02); case FEC_2_3: + dprintk("%s: set FEC to 2/3\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0x04); case FEC_3_4: + dprintk("%s: set FEC to 3/4\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0x08); case FEC_5_6: + dprintk("%s: set FEC to 4/5\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0x20); case FEC_7_8: + dprintk("%s: set FEC to 5/6\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0x80); case FEC_AUTO: + dprintk("%s: set FEC to auto\n",__FUNCTION__); return cx24123_writereg(state, 0x0f, 0xae); default: return -EOPNOTSUPP; @@ -510,6 +534,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par struct cx24123_state *state = fe->demodulator_priv; unsigned long timeout; + dprintk("%s: pll writereg called, data=0x%08x\n",__FUNCTION__,data); + /* align the 21 bytes into to bit23 boundary */ data = data << 3; @@ -581,6 +607,9 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet cx24123_writereg(state, 0x27, state->FILTune >> 2); cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3)); + dprintk("%s: pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg, + state->bandselectarg,state->pllarg); + return 0; } @@ -589,6 +618,8 @@ static int cx24123_initfe(struct dvb_frontend* fe) struct cx24123_state *state = fe->demodulator_priv; int i; + dprintk("%s: init frontend\n",__FUNCTION__); + /* Configure the demod to a good set of defaults */ for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++) cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data); @@ -616,10 +647,13 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage switch (voltage) { case SEC_VOLTAGE_13: + dprintk("%s: isl6421 voltage = 13V\n",__FUNCTION__); return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */ case SEC_VOLTAGE_18: + dprintk("%s: isl6421 voltage = 18V\n",__FUNCTION__); return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */ case SEC_VOLTAGE_OFF: + dprintk("%s: isl5421 voltage off\n",__FUNCTION__); return cx24123_writelnbreg(state, 0x0, val & 0x30); default: return -EINVAL; @@ -780,6 +814,8 @@ static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber) else state->snr = 0; + dprintk("%s: BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr); + *ber = state->lastber; return 0; @@ -790,6 +826,8 @@ static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_str struct cx24123_state *state = fe->demodulator_priv; *signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */ + dprintk("%s: Signal strength = %d\n",__FUNCTION__,*signal_strength); + return 0; } @@ -798,6 +836,8 @@ static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr) struct cx24123_state *state = fe->demodulator_priv; *snr = state->snr; + dprintk("%s: read S/N index = %d\n",__FUNCTION__,*snr); + return 0; } @@ -806,6 +846,8 @@ static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) struct cx24123_state *state = fe->demodulator_priv; *ucblocks = state->lastber; + dprintk("%s: ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks); + return 0; } @@ -813,6 +855,8 @@ static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par { struct cx24123_state *state = fe->demodulator_priv; + dprintk("%s: set_frontend\n",__FUNCTION__); + if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); @@ -836,6 +880,8 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par { struct cx24123_state *state = fe->demodulator_priv; + dprintk("%s: get_frontend\n",__FUNCTION__); + if (cx24123_get_inversion(state, &p->inversion) != 0) { printk("%s: Failed to get inversion status\n",__FUNCTION__); return -EREMOTEIO; @@ -862,8 +908,10 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) switch (tone) { case SEC_TONE_ON: + dprintk("%s: isl6421 sec tone on\n",__FUNCTION__); return cx24123_writelnbreg(state, 0x0, val | 0x10); case SEC_TONE_OFF: + dprintk("%s: isl6421 sec tone off\n",__FUNCTION__); return cx24123_writelnbreg(state, 0x0, val & 0x2f); default: printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone); @@ -980,7 +1028,7 @@ static struct dvb_frontend_ops cx24123_ops = { }; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware"); MODULE_AUTHOR("Steven Toth"); -- 2.39.2