From cb3bc9d0de1e247268622acd40e0d2f8120f299c Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 27 Feb 2012 20:03:51 +0000 Subject: [PATCH] powerpc/eeh: Cleanup comments in the EEH core The EEH has been implemented on pSeries platform. The original code looks a little bit nasty. The patch does cleanup on the current EEH implementation so that it looks more clean. * Duplicated comments have been removed from the corresponding header files. * Comments have been reorganized so that it looks more clean. * The leading comments of functions are adjusted for a little bit so that the result of "make pdfdocs" would be more unified. * Function definitions and calls have unified format as "xxx()". That means the format "xxx ()" has been replaced by "xxx()". * There're multiple functions implemented for resetting PE. The position of those functions have been move around so that they are adjacent to each other to reflect their relationship. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/eeh.h | 26 +- arch/powerpc/include/asm/ppc-pci.h | 71 +---- arch/powerpc/platforms/pseries/eeh.c | 400 ++++++++++++++++++--------- 3 files changed, 276 insertions(+), 221 deletions(-) diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 66ea9b8b95c..232887721ff 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -1,6 +1,6 @@ /* - * eeh.h * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. + * Copyright 2001-2012 IBM Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -40,8 +40,10 @@ extern int eeh_subsystem_enabled; #define EEH_MODE_RECOVERING (1<<3) #define EEH_MODE_IRQ_DISABLED (1<<4) -/* Max number of EEH freezes allowed before we consider the device - * to be permanently disabled. */ +/* + * Max number of EEH freezes allowed before we consider the device + * to be permanently disabled. + */ #define EEH_MAX_ALLOWED_FREEZES 5 void __init eeh_init(void); @@ -49,26 +51,8 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val); int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); void __init pci_addr_cache_build(void); - -/** - * eeh_add_device_early - * eeh_add_device_late - * - * Perform eeh initialization for devices added after boot. - * Call eeh_add_device_early before doing any i/o to the - * device (including config space i/o). Call eeh_add_device_late - * to finish the eeh setup for this device. - */ void eeh_add_device_tree_early(struct device_node *); void eeh_add_device_tree_late(struct pci_bus *); - -/** - * eeh_remove_device_recursive - undo EEH for device & children. - * @dev: pci device to be removed - * - * As above, this removes the device; it also removes child - * pci devices as well. - */ void eeh_remove_bus_device(struct pci_dev *); /** diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 6d422979eba..221d82fd823 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -47,92 +47,27 @@ extern int rtas_setup_phb(struct pci_controller *phb); extern unsigned long pci_probe_only; -/* ---- EEH internal-use-only related routines ---- */ #ifdef CONFIG_EEH void pci_addr_cache_insert_device(struct pci_dev *dev); void pci_addr_cache_remove_device(struct pci_dev *dev); void pci_addr_cache_build(void); struct pci_dev *pci_get_device_by_addr(unsigned long addr); - -/** - * eeh_slot_error_detail -- record and EEH error condition to the log - * @pdn: pci device node - * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE - * - * Obtains the EEH error details from the RTAS subsystem, - * and then logs these details with the RTAS error log system. - */ #define EEH_LOG_TEMP_FAILURE 1 #define EEH_LOG_PERM_FAILURE 2 void eeh_slot_error_detail (struct pci_dn *pdn, int severity); - -/** - * rtas_pci_enable - enable IO transfers for this slot - * @pdn: pci device node - * @function: either EEH_THAW_MMIO or EEH_THAW_DMA - * - * Enable I/O transfers to this slot - */ #define EEH_THAW_MMIO 2 #define EEH_THAW_DMA 3 int rtas_pci_enable(struct pci_dn *pdn, int function); - -/** - * rtas_set_slot_reset -- unfreeze a frozen slot - * @pdn: pci device node - * - * Clear the EEH-frozen condition on a slot. This routine - * does this by asserting the PCI #RST line for 1/8th of - * a second; this routine will sleep while the adapter is - * being reset. - * - * Returns a non-zero value if the reset failed. - */ int rtas_set_slot_reset (struct pci_dn *); int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); - -/** - * eeh_restore_bars - Restore device configuration info. - * @pdn: pci device node - * - * A reset of a PCI device will clear out its config space. - * This routines will restore the config space for this - * device, and is children, to values previously obtained - * from the firmware. - */ void eeh_restore_bars(struct pci_dn *); - -/** - * rtas_configure_bridge -- firmware initialization of pci bridge - * @pdn: pci device node - * - * Ask the firmware to configure all PCI bridges devices - * located behind the indicated node. Required after a - * pci device reset. Does essentially the same hing as - * eeh_restore_bars, but for brdges, and lets firmware - * do the work. - */ void rtas_configure_bridge(struct pci_dn *); - int rtas_write_config(struct pci_dn *, int where, int size, u32 val); int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); - -/** - * eeh_mark_slot -- set mode flags for pertition endpoint - * @pdn: pci device node - * - * mark and clear slots: find "partition endpoint" PE and set or - * clear the flags for each subnode of the PE. - */ -void eeh_mark_slot (struct device_node *dn, int mode_flag); -void eeh_clear_slot (struct device_node *dn, int mode_flag); - -/** - * find_device_pe -- Find the associated "Partiationable Endpoint" PE - * @pdn: pci device node - */ -struct device_node * find_device_pe(struct device_node *dn); +void eeh_mark_slot(struct device_node *dn, int mode_flag); +void eeh_clear_slot(struct device_node *dn, int mode_flag); +struct device_node *find_device_pe(struct device_node *dn); void eeh_sysfs_add_device(struct pci_dev *pdev); void eeh_sysfs_remove_device(struct pci_dev *pdev); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index c0b40af4ce4..5f6d37bdd4f 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1,8 +1,8 @@ /* - * eeh.c * Copyright IBM Corporation 2001, 2005, 2006 * Copyright Dave Engebretsen & Todd Inglett 2001 * Copyright Linas Vepstas 2005, 2006 + * Copyright 2001-2012 IBM Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,7 +22,7 @@ */ #include -#include /* for init_mm */ +#include #include #include #include @@ -129,9 +129,16 @@ static unsigned long slot_resets; #define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) -/* --------------------------------------------------------------- */ -/* Below lies the EEH event infrastructure */ - +/** + * rtas_slot_error_detail - Retrieve error log through RTAS call + * @pdn: device node + * @severity: temporary or permanent error log + * @driver_log: driver log to be combined with the retrieved error log + * @loglen: length of driver log + * + * This routine should be called to retrieve error log through the dedicated + * RTAS call. + */ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, char *driver_log, size_t loglen) { @@ -163,7 +170,7 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, } /** - * gather_pci_data - copy assorted PCI config space registers to buff + * gather_pci_data - Copy assorted PCI config space registers to buff * @pdn: device to report data for * @buf: point to buffer in which to log * @len: amount of room in buffer @@ -258,6 +265,16 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) return n; } +/** + * eeh_slot_error_detail - Generate combined log including driver log and error log + * @pdn: device node + * @severity: temporary or permanent error log + * + * This routine should be called to generate the combined log, which + * is comprised of driver log and error log. The driver log is figured + * out from the config space of the corresponding PCI device, while + * the error log is fetched through platform dependent function call. + */ void eeh_slot_error_detail(struct pci_dn *pdn, int severity) { size_t loglen = 0; @@ -275,6 +292,9 @@ void eeh_slot_error_detail(struct pci_dn *pdn, int severity) * read_slot_reset_state - Read the reset state of a device node's slot * @dn: device node to read * @rets: array to return results in + * + * Read the reset state of a device node's slot through platform dependent + * function call. */ static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) { @@ -300,9 +320,9 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) } /** - * eeh_wait_for_slot_status - returns error status of slot - * @pdn pci device node - * @max_wait_msecs maximum number to millisecs to wait + * eeh_wait_for_slot_status - Returns error status of slot + * @pdn: pci device node + * @max_wait_msecs: maximum number to millisecs to wait * * Return negative value if a permanent error, else return * Partition Endpoint (PE) status value. @@ -332,16 +352,16 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) mwait = rets[2]; if (mwait <= 0) { - printk (KERN_WARNING - "EEH: Firmware returned bad wait value=%d\n", mwait); + printk(KERN_WARNING "EEH: Firmware returned bad wait value=%d\n", + mwait); mwait = 1000; } else if (mwait > 300*1000) { - printk (KERN_WARNING - "EEH: Firmware is taking too long, time=%d\n", mwait); + printk(KERN_WARNING "EEH: Firmware is taking too long, time=%d\n", + mwait); mwait = 300*1000; } max_wait_msecs -= mwait; - msleep (mwait); + msleep(mwait); } printk(KERN_WARNING "EEH: Timed out waiting for slot status\n"); @@ -349,8 +369,11 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) } /** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xA.... + * eeh_token_to_phys - Convert EEH address token to phys address + * @token: I/O token, should be address in the form 0xA.... + * + * This routine should be called to convert virtual I/O address + * to physical one. */ static inline unsigned long eeh_token_to_phys(unsigned long token) { @@ -365,8 +388,11 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) return pa | (token & (PAGE_SIZE-1)); } -/** - * Return the "partitionable endpoint" (pe) under which this device lies +/** + * find_device_pe - Retrieve the PE for the given device + * @dn: device node + * + * Return the PE under which this device lies */ struct device_node * find_device_pe(struct device_node *dn) { @@ -377,14 +403,18 @@ struct device_node * find_device_pe(struct device_node *dn) return dn; } -/** Mark all devices that are children of this device as failed. - * Mark the device driver too, so that it can see the failure - * immediately; this is critical, since some drivers poll - * status registers in interrupts ... If a driver is polling, - * and the slot is frozen, then the driver can deadlock in - * an interrupt context, which is bad. +/** + * __eeh_mark_slot - Mark all child devices as failed + * @parent: parent device + * @mode_flag: failure flag + * + * Mark all devices that are children of this device as failed. + * Mark the device driver too, so that it can see the failure + * immediately; this is critical, since some drivers poll + * status registers in interrupts ... If a driver is polling, + * and the slot is frozen, then the driver can deadlock in + * an interrupt context, which is bad. */ - static void __eeh_mark_slot(struct device_node *parent, int mode_flag) { struct device_node *dn; @@ -404,10 +434,18 @@ static void __eeh_mark_slot(struct device_node *parent, int mode_flag) } } -void eeh_mark_slot (struct device_node *dn, int mode_flag) +/** + * eeh_mark_slot - Mark the indicated device and its children as failed + * @dn: parent device + * @mode_flag: failure flag + * + * Mark the indicated device and its child devices as failed. + * The device drivers are marked as failed as well. + */ +void eeh_mark_slot(struct device_node *dn, int mode_flag) { struct pci_dev *dev; - dn = find_device_pe (dn); + dn = find_device_pe(dn); /* Back up one, since config addrs might be shared */ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) @@ -423,6 +461,13 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag) __eeh_mark_slot(dn, mode_flag); } +/** + * __eeh_clear_slot - Clear failure flag for the child devices + * @parent: parent device + * @mode_flag: flag to be cleared + * + * Clear failure flag for the child devices. + */ static void __eeh_clear_slot(struct device_node *parent, int mode_flag) { struct device_node *dn; @@ -436,12 +481,19 @@ static void __eeh_clear_slot(struct device_node *parent, int mode_flag) } } -void eeh_clear_slot (struct device_node *dn, int mode_flag) +/** + * eeh_clear_slot - Clear failure flag for the indicated device and its children + * @dn: parent device + * @mode_flag: flag to be cleared + * + * Clear failure flag for the indicated device and its children. + */ +void eeh_clear_slot(struct device_node *dn, int mode_flag) { unsigned long flags; raw_spin_lock_irqsave(&confirm_error_lock, flags); - dn = find_device_pe (dn); + dn = find_device_pe(dn); /* Back up one, since config addrs might be shared */ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) @@ -453,43 +505,10 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag) raw_spin_unlock_irqrestore(&confirm_error_lock, flags); } -void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset) -{ - struct device_node *dn; - - for_each_child_of_node(parent, dn) { - if (PCI_DN(dn)) { - - struct pci_dev *dev = PCI_DN(dn)->pcidev; - - if (dev && dev->driver) - *freset |= dev->needs_freset; - - __eeh_set_pe_freset(dn, freset); - } - } -} - -void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset) -{ - struct pci_dev *dev; - dn = find_device_pe(dn); - - /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) - dn = dn->parent; - - dev = PCI_DN(dn)->pcidev; - if (dev) - *freset |= dev->needs_freset; - - __eeh_set_pe_freset(dn, freset); -} - /** - * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze - * @dn device node - * @dev pci device, if known + * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze + * @dn: device node + * @dev: pci device, if known * * Check for an EEH failure for the given device node. Call this * routine if the result of a read was all 0xff's and you want to @@ -548,11 +567,11 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) pdn->eeh_check_count ++; if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) { location = of_get_property(dn, "ibm,loc-code", NULL); - printk (KERN_ERR "EEH: %d reads ignored for recovering device at " + printk(KERN_ERR "EEH: %d reads ignored for recovering device at " "location=%s driver=%s pci addr=%s\n", pdn->eeh_check_count, location, eeh_driver_name(dev), eeh_pci_name(dev)); - printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", + printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n", eeh_driver_name(dev)); dump_stack(); } @@ -579,7 +598,8 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) } /* Note that config-io to empty slots may fail; - * they are empty when they don't have children. */ + * they are empty when they don't have children. + */ if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) { false_positives++; pdn->eeh_false_positives ++; @@ -609,15 +629,17 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) /* Avoid repeated reports of this failure, including problems * with other functions on this device, and functions under - * bridges. */ - eeh_mark_slot (dn, EEH_MODE_ISOLATED); + * bridges. + */ + eeh_mark_slot(dn, EEH_MODE_ISOLATED); raw_spin_unlock_irqrestore(&confirm_error_lock, flags); - eeh_send_failure_event (dn, dev); + eeh_send_failure_event(dn, dev); /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure - * out what happened. So print that out. */ + * out what happened. So print that out. + */ dump_stack(); return 1; @@ -629,9 +651,9 @@ dn_unlock: EXPORT_SYMBOL_GPL(eeh_dn_check_failure); /** - * eeh_check_failure - check if all 1's data is due to EEH slot freeze - * @token i/o token, should be address in the form 0xA.... - * @val value, should be all 1's (XXX why do we need this arg??) + * eeh_check_failure - Check if all 1's data is due to EEH slot freeze + * @token: I/O token, should be address in the form 0xA.... + * @val: value, should be all 1's (XXX why do we need this arg??) * * Check for an EEH failure at the given token address. Call this * routine if the result of a read was all 0xff's and you want to @@ -655,7 +677,7 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon } dn = pci_device_to_OF_node(dev); - eeh_dn_check_failure (dn, dev); + eeh_dn_check_failure(dn, dev); pci_dev_put(dev); return val; @@ -663,14 +685,15 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); -/* ------------------------------------------------------------- */ -/* The code below deals with error recovery */ /** - * rtas_pci_enable - enable MMIO or DMA transfers for this slot + * rtas_pci_enable - Enable MMIO or DMA transfers for this slot * @pdn pci device node + * + * This routine should be called to reenable frozen MMIO or DMA + * so that it would work correctly again. It's useful while doing + * recovery or log collection on the indicated device. */ - int rtas_pci_enable(struct pci_dn *pdn, int function) { @@ -692,7 +715,7 @@ rtas_pci_enable(struct pci_dn *pdn, int function) printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n", function, rc, pdn->node->full_name); - rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC); + rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC); if ((rc == 4) && (function == EEH_THAW_MMIO)) return 0; @@ -700,27 +723,25 @@ rtas_pci_enable(struct pci_dn *pdn, int function) } /** - * rtas_pci_slot_reset - raises/lowers the pci #RST line - * @pdn pci device node + * rtas_pci_slot_reset - Raises/Lowers the pci #RST line + * @pdn: pci device node * @state: 1/0 to raise/lower the #RST * * Clear the EEH-frozen condition on a slot. This routine * asserts the PCI #RST line if the 'state' argument is '1', * and drops the #RST line if 'state is '0'. This routine is * safe to call in an interrupt context. - * */ - static void rtas_pci_slot_reset(struct pci_dn *pdn, int state) { int config_addr; int rc; - BUG_ON (pdn==NULL); + BUG_ON(pdn==NULL); if (!pdn->phb) { - printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", + printk(KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", pdn->node->full_name); return; } @@ -752,12 +773,12 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state) /** * pcibios_set_pcie_slot_reset - Set PCI-E reset state - * @dev: pci device struct - * @state: reset state to enter + * @dev: pci device struct + * @state: reset state to enter * * Return value: * 0 if success - **/ + */ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) { struct device_node *dn = pci_device_to_OF_node(dev); @@ -781,10 +802,62 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat } /** - * rtas_set_slot_reset -- assert the pci #RST line for 1/4 second - * @pdn: pci device node to be reset. + * __eeh_set_pe_freset - Check the required reset for child devices + * @parent: parent device + * @freset: return value + * + * Each device might have its preferred reset type: fundamental or + * hot reset. The routine is used to collect the information from + * the child devices so that they could be reset accordingly. */ +void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset) +{ + struct device_node *dn; + + for_each_child_of_node(parent, dn) { + if (PCI_DN(dn)) { + struct pci_dev *dev = PCI_DN(dn)->pcidev; + + if (dev && dev->driver) + *freset |= dev->needs_freset; + + __eeh_set_pe_freset(dn, freset); + } + } +} + +/** + * eeh_set_pe_freset - Check the required reset for the indicated device and its children + * @dn: parent device + * @freset: return value + * + * Each device might have its preferred reset type: fundamental or + * hot reset. The routine is used to collected the information for + * the indicated device and its children so that the bunch of the + * devices could be reset properly. + */ +void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset) +{ + struct pci_dev *dev; + dn = find_device_pe(dn); + + /* Back up one, since config addrs might be shared */ + if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) + dn = dn->parent; + dev = PCI_DN(dn)->pcidev; + if (dev) + *freset |= dev->needs_freset; + + __eeh_set_pe_freset(dn, freset); +} + +/** + * __rtas_set_slot_reset - Assert the pci #RST line for 1/4 second + * @pdn: pci device node to be reset. + * + * Assert the PCI #RST line for 1/4 second. + */ static void __rtas_set_slot_reset(struct pci_dn *pdn) { unsigned int freset = 0; @@ -803,25 +876,35 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn) rtas_pci_slot_reset(pdn, 1); /* The PCI bus requires that the reset be held high for at least - * a 100 milliseconds. We wait a bit longer 'just in case'. */ - + * a 100 milliseconds. We wait a bit longer 'just in case'. + */ #define PCI_BUS_RST_HOLD_TIME_MSEC 250 - msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + msleep(PCI_BUS_RST_HOLD_TIME_MSEC); /* We might get hit with another EEH freeze as soon as the * pci slot reset line is dropped. Make sure we don't miss - * these, and clear the flag now. */ - eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); + * these, and clear the flag now. + */ + eeh_clear_slot(pdn->node, EEH_MODE_ISOLATED); - rtas_pci_slot_reset (pdn, 0); + rtas_pci_slot_reset(pdn, 0); /* After a PCI slot has been reset, the PCI Express spec requires * a 1.5 second idle time for the bus to stabilize, before starting - * up traffic. */ + * up traffic. + */ #define PCI_BUS_SETTLE_TIME_MSEC 1800 - msleep (PCI_BUS_SETTLE_TIME_MSEC); + msleep(PCI_BUS_SETTLE_TIME_MSEC); } +/** + * rtas_set_slot_reset - Reset the indicated PE + * @pdn: PCI device node + * + * This routine should be called to reset indicated device, including + * PE. A PE might include multiple PCI devices and sometimes PCI bridges + * might be involved as well. + */ int rtas_set_slot_reset(struct pci_dn *pdn) { int i, rc; @@ -846,7 +929,6 @@ int rtas_set_slot_reset(struct pci_dn *pdn) return -1; } -/* ------------------------------------------------------- */ /** Save and restore of PCI BARs * * Although firmware will set up BARs during boot, it doesn't @@ -863,7 +945,7 @@ int rtas_set_slot_reset(struct pci_dn *pdn) * the expansion ROM base address, the latency timer, and etc. * from the saved values in the device node. */ -static inline void __restore_bars (struct pci_dn *pdn) +static inline void __restore_bars(struct pci_dn *pdn) { int i; u32 cmd; @@ -879,17 +961,18 @@ static inline void __restore_bars (struct pci_dn *pdn) #define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) #define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) - rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + rtas_write_config(pdn, PCI_CACHE_LINE_SIZE, 1, SAVED_BYTE(PCI_CACHE_LINE_SIZE)); - rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + rtas_write_config(pdn, PCI_LATENCY_TIMER, 1, SAVED_BYTE(PCI_LATENCY_TIMER)); /* max latency, min grant, interrupt pin and line */ rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); /* Restore PERR & SERR bits, some devices require it, - don't touch the other command bits */ + * don't touch the other command bits + */ rtas_read_config(pdn, PCI_COMMAND, 4, &cmd); if (pdn->config_space[1] & PCI_COMMAND_PARITY) cmd |= PCI_COMMAND_PARITY; @@ -903,7 +986,8 @@ static inline void __restore_bars (struct pci_dn *pdn) } /** - * eeh_restore_bars - restore the PCI config space info + * eeh_restore_bars - Restore the PCI config space info + * @pdn: PCI device node * * This routine performs a recursive walk to the children * of this device as well. @@ -915,14 +999,15 @@ void eeh_restore_bars(struct pci_dn *pdn) return; if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code)) - __restore_bars (pdn); + __restore_bars(pdn); for_each_child_of_node(pdn->node, dn) - eeh_restore_bars (PCI_DN(dn)); + eeh_restore_bars(PCI_DN(dn)); } /** - * eeh_save_bars - save device bars + * eeh_save_bars - Save device bars + * @pdn: PCI device node * * Save the values of the device bars. Unlike the restore * routine, this routine is *not* recursive. This is because @@ -940,6 +1025,14 @@ static void eeh_save_bars(struct pci_dn *pdn) rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]); } +/** + * rtas_configure_bridge - Configure PCI bridges for the indicated PE + * @pdn: PCI device node + * + * PCI bridges might be included in PE. In order to make the PE work + * again. The included PCI bridges should be recovered after the PE + * encounters frozen state. + */ void rtas_configure_bridge(struct pci_dn *pdn) { @@ -963,17 +1056,11 @@ rtas_configure_bridge(struct pci_dn *pdn) BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); if (rc) { - printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", + printk(KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", rc, pdn->node->full_name); } } -/* ------------------------------------------------------------- */ -/* The code below deals with enabling EEH for devices during the - * early boot sequence. EEH must be enabled before any PCI probing - * can be done. - */ - #define EEH_ENABLE 1 struct eeh_early_enable_info { @@ -981,7 +1068,18 @@ struct eeh_early_enable_info { unsigned int buid_lo; }; -static int get_pe_addr (int config_addr, +/** + * get_pe_addr - Retrieve PE address with given BDF address + * @config_addr: BDF address + * @info: BUID of the associated PHB + * + * There're 2 kinds of addresses existing in EEH core components: + * BDF address and PE address. Besides, there has dedicated platform + * dependent function call to retrieve the PE address according to + * the given BDF address. Further more, we prefer PE address on BDF + * address in EEH core components. + */ +static int get_pe_addr(int config_addr, struct eeh_early_enable_info *info) { unsigned int rets[3]; @@ -990,12 +1088,12 @@ static int get_pe_addr (int config_addr, /* Use latest config-addr token on power6 */ if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { /* Make sure we have a PE in hand */ - ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, + ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, config_addr, info->buid_hi, info->buid_lo, 1); if (ret || (rets[0]==0)) return 0; - ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, + ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, config_addr, info->buid_hi, info->buid_lo, 0); if (ret) return 0; @@ -1004,7 +1102,7 @@ static int get_pe_addr (int config_addr, /* Use older config-addr token on power5 */ if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, + ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets, config_addr, info->buid_hi, info->buid_lo, 0); if (ret) return 0; @@ -1013,7 +1111,15 @@ static int get_pe_addr (int config_addr, return 0; } -/* Enable eeh for the given device node. */ +/** + * early_enable_eeh - Early enable EEH on the indicated device + * @dn: device node + * @data: BUID + * + * Enable EEH functionality on the specified PCI device. The function + * is expected to be called before real PCI probing is done. However, + * the PHBs have been initialized at this point. + */ static void *early_enable_eeh(struct device_node *dn, void *data) { unsigned int rets[3]; @@ -1047,7 +1153,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) pdn->class_code = *class_code; /* Ok... see if this device supports EEH. Some do, some don't, - * and the only way to find out is to check each and every one. */ + * and the only way to find out is to check each and every one. + */ regs = of_get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ @@ -1061,13 +1168,15 @@ static void *early_enable_eeh(struct device_node *dn, void *data) pdn->eeh_config_addr = regs[0]; /* If the newer, better, ibm,get-config-addr-info is supported, - * then use that instead. */ + * then use that instead. + */ pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info); /* Some older systems (Power4) allow the * ibm,set-eeh-option call to succeed even on nodes * where EEH is not supported. Verify support - * explicitly. */ + * explicitly. + */ ret = read_slot_reset_state(pdn, rets); if ((ret == 0) && (rets[1] == 1)) enable = 1; @@ -1083,7 +1192,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) } else { /* This device doesn't support EEH, but it may have an - * EEH parent, in which case we mark it as supported. */ + * EEH parent, in which case we mark it as supported. + */ if (dn->parent && PCI_DN(dn->parent) && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ @@ -1101,7 +1211,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) return NULL; } -/* +/** + * eeh_init - EEH initialization + * * Initialize EEH by trying to enable it for all of the adapters in the system. * As a side effect we can determine here if eeh is supported at all. * Note that we leave EEH on so failed config cycles won't cause a machine @@ -1133,7 +1245,7 @@ void __init eeh_init(void) ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); - ibm_configure_bridge = rtas_token ("ibm,configure-bridge"); + ibm_configure_bridge = rtas_token("ibm,configure-bridge"); ibm_configure_pe = rtas_token("ibm,configure-pe"); if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) @@ -1170,7 +1282,7 @@ void __init eeh_init(void) } /** - * eeh_add_device_early - enable EEH for the indicated device_node + * eeh_add_device_early - Enable EEH for the indicated device_node * @dn: device node for which to set up EEH * * This routine must be used to perform EEH initialization for PCI @@ -1199,6 +1311,14 @@ static void eeh_add_device_early(struct device_node *dn) early_enable_eeh(dn, &info); } +/** + * eeh_add_device_tree_early - Enable EEH for the indicated device + * @dn: device node + * + * This routine must be used to perform EEH initialization for the + * indicated PCI device that was added after system boot (e.g. + * hotplug, dlpar). + */ void eeh_add_device_tree_early(struct device_node *dn) { struct device_node *sib; @@ -1210,7 +1330,7 @@ void eeh_add_device_tree_early(struct device_node *dn) EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); /** - * eeh_add_device_late - perform EEH initialization for the indicated pci device + * eeh_add_device_late - Perform EEH initialization for the indicated pci device * @dev: pci device for which to set up EEH * * This routine must be used to complete EEH initialization for PCI @@ -1234,13 +1354,21 @@ static void eeh_add_device_late(struct pci_dev *dev) } WARN_ON(pdn->pcidev); - pci_dev_get (dev); + pci_dev_get(dev); pdn->pcidev = dev; pci_addr_cache_insert_device(dev); eeh_sysfs_add_device(dev); } +/** + * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus + * @bus: PCI bus + * + * This routine must be used to perform EEH initialization for PCI + * devices which are attached to the indicated PCI bus. The PCI bus + * is added after system boot through hotplug or dlpar. + */ void eeh_add_device_tree_late(struct pci_bus *bus) { struct pci_dev *dev; @@ -1257,7 +1385,7 @@ void eeh_add_device_tree_late(struct pci_bus *bus) EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); /** - * eeh_remove_device - undo EEH setup for the indicated pci device + * eeh_remove_device - Undo EEH setup for the indicated pci device * @dev: pci device to be removed * * This routine should be called when a device is removed from @@ -1281,12 +1409,20 @@ static void eeh_remove_device(struct pci_dev *dev) return; } PCI_DN(dn)->pcidev = NULL; - pci_dev_put (dev); + pci_dev_put(dev); pci_addr_cache_remove_device(dev); eeh_sysfs_remove_device(dev); } +/** + * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device + * @dev: PCI device + * + * This routine must be called when a device is removed from the + * running system through hotplug or dlpar. The corresponding + * PCI address cache will be removed. + */ void eeh_remove_bus_device(struct pci_dev *dev) { struct pci_bus *bus = dev->subordinate; -- 2.39.5