From cc00383722db7a4b75e005f5bb8b08b4d874ed00 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Feb 2016 19:59:11 +0100 Subject: [PATCH] mtd: nand: atmel: switch to mtd_ooblayout_ops Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon Reviewed-by: Nicolas Ferre --- drivers/mtd/nand/atmel_nand.c | 84 ++++++++++++++++------------------- 1 file changed, 38 insertions(+), 46 deletions(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index b132c8fd3701..eec8ca739cae 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -71,30 +71,44 @@ struct atmel_nand_nfc_caps { uint32_t rb_mask; }; -/* oob layout for large page size +/* + * oob layout for large page size * bad block info is on bytes 0 and 1 * the bytes have to be consecutives to avoid * several NAND_CMD_RNDOUT during read - */ -static struct nand_ecclayout atmel_oobinfo_large = { - .eccbytes = 4, - .eccpos = {60, 61, 62, 63}, - .oobfree = { - {2, 58} - }, -}; - -/* oob layout for small page size + * + * oob layout for small page size * bad block info is on bytes 4 and 5 * the bytes have to be consecutives to avoid * several NAND_CMD_RNDOUT during read */ -static struct nand_ecclayout atmel_oobinfo_small = { - .eccbytes = 4, - .eccpos = {0, 1, 2, 3}, - .oobfree = { - {6, 10} - }, +static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->length = 4; + oobregion->offset = 0; + + return 0; +} + +static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 6; + oobregion->length = mtd->oobsize - oobregion->offset; + + return 0; +} + +static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = { + .ecc = atmel_ooblayout_ecc_sp, + .free = atmel_ooblayout_free_sp, }; struct atmel_nfc { @@ -162,8 +176,6 @@ struct atmel_nand_host { int *pmecc_delta; }; -static struct nand_ecclayout atmel_pmecc_oobinfo; - /* * Enable NAND. */ @@ -480,22 +492,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size) return (m * cap + 7) / 8; } -static void pmecc_config_ecc_layout(struct nand_ecclayout *layout, - int oobsize, int ecc_len) -{ - int i; - - layout->eccbytes = ecc_len; - - /* ECC will occupy the last ecc_len bytes continuously */ - for (i = 0; i < ecc_len; i++) - layout->eccpos[i] = oobsize - ecc_len + i; - - layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES; - layout->oobfree[0].length = - oobsize - ecc_len - layout->oobfree[0].offset; -} - static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) { int table_size; @@ -1012,8 +1008,8 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_get_controller_data(nand_chip); + int eccbytes = mtd_ooblayout_count_eccbytes(mtd); uint32_t val = 0; - struct nand_ecclayout *ecc_layout; struct mtd_oob_region oobregion; pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); @@ -1064,12 +1060,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) | PMECC_CFG_AUTO_DISABLE); pmecc_writel(host->ecc, CFG, val); - ecc_layout = nand_chip->ecc.layout; pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1); mtd_ooblayout_ecc(mtd, 0, &oobregion); pmecc_writel(host->ecc, SADDR, oobregion.offset); pmecc_writel(host->ecc, EADDR, - oobregion.offset + ecc_layout->eccbytes - 1); + oobregion.offset + eccbytes - 1); /* See datasheet about PMECC Clock Control Register */ pmecc_writel(host->ecc, CLK, 2); pmecc_writel(host->ecc, IDR, 0xff); @@ -1291,11 +1286,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev, err_no = -EINVAL; goto err; } - pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, - mtd->oobsize, - nand_chip->ecc.total); - nand_chip->ecc.layout = &atmel_pmecc_oobinfo; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); break; default: dev_warn(host->dev, @@ -1650,19 +1642,19 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev, /* set ECC page size and oob layout */ switch (mtd->writesize) { case 512: - nand_chip->ecc.layout = &atmel_oobinfo_small; + mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); break; case 1024: - nand_chip->ecc.layout = &atmel_oobinfo_large; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); break; case 2048: - nand_chip->ecc.layout = &atmel_oobinfo_large; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); break; case 4096: - nand_chip->ecc.layout = &atmel_oobinfo_large; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); break; default: -- 2.39.5