From cce47711f3146419eda735d72a870c7b79806968 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 1 Dec 2014 15:36:31 +0200 Subject: [PATCH] wil6210: reset flow update If card reset with firmware download executed, followed by reset with use of firmware from build in flash, firmware download indication remains in the hardware register. When running firmware download flow, the SW download indication is written by the driver to bit 0 in usage_6: wil_fw_load(), "S(RGF_USER_USAGE_6, 1);" This register, like all USER RGF, wasn't reset in SW reset flow. Therefore the driver must clear it on SW reset flow. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- drivers/net/wireless/ath/wil6210/main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 8f257a4269c6..8ff3fe34fe05 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -493,6 +493,9 @@ static int wil_target_reset(struct wil6210_priv *wil) wil_halt_cpu(wil); + /* Clear Fw Download notification */ + C(RGF_USER_USAGE_6, BIT(0)); + if (is_sparrow) { S(RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN); /* XTAL stabilization should take about 3ms */ -- 2.39.5