From cf0b08d0cd87ada9d284925834d08fb8026da888 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 3 May 2011 14:59:46 -0500 Subject: [PATCH] [SCSI] hpsa: use new doorbell-bit-5 reset method The bit-2-doorbell reset method seemed to cause (survivable) NMIs on some systems and (unsurvivable) IOCK NMIs on some G7 servers. Firmware guys implemented a new doorbell method to alleviate these problems triggered by bit 5 of the doorbell register. We want to use it if it's available. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 25 ++++++++++++++++++++----- drivers/scsi/hpsa_cmd.h | 2 ++ 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index ca92141b7736..c096cda3a6f4 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3128,7 +3128,7 @@ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, #define hpsa_noop(p) hpsa_message(p, 3, 0) static int hpsa_controller_hard_reset(struct pci_dev *pdev, - void * __iomem vaddr, bool use_doorbell) + void * __iomem vaddr, u32 use_doorbell) { u16 pmcsr; int pos; @@ -3139,7 +3139,7 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev, * other way using the doorbell register. */ dev_info(&pdev->dev, "using doorbell to reset controller\n"); - writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL); + writel(use_doorbell, vaddr + SA5_DOORBELL); msleep(1000); } else { /* Try to do it the PCI power state way */ @@ -3243,7 +3243,7 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) u32 misc_fw_support; int rc; struct CfgTable __iomem *cfgtable; - bool use_doorbell; + u32 use_doorbell; u32 board_id; u16 command_register; @@ -3306,9 +3306,24 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) if (rc) goto unmap_vaddr; - /* If reset via doorbell register is supported, use that. */ + /* If reset via doorbell register is supported, use that. + * There are two such methods. Favor the newest method. + */ misc_fw_support = readl(&cfgtable->misc_fw_support); - use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; + use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2; + if (use_doorbell) { + use_doorbell = DOORBELL_CTLR_RESET2; + } else { + use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; + if (use_doorbell) { + dev_warn(&pdev->dev, "Controller claims that " + "'Bit 2 doorbell reset' is " + "supported, but not 'bit 5 doorbell reset'. " + "Firmware update is recommended.\n"); + rc = -ENODEV; + goto unmap_cfgtable; + } + } rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell); if (rc) diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 8fd35a7abcd1..55d741b019db 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -101,6 +101,7 @@ #define CFGTBL_ChangeReq 0x00000001l #define CFGTBL_AccCmds 0x00000001l #define DOORBELL_CTLR_RESET 0x00000004l +#define DOORBELL_CTLR_RESET2 0x00000020l #define CFGTBL_Trans_Simple 0x00000002l #define CFGTBL_Trans_Performant 0x00000004l @@ -337,6 +338,7 @@ struct CfgTable { u8 reserved[0x78 - 0x58]; u32 misc_fw_support; /* offset 0x78 */ #define MISC_FW_DOORBELL_RESET (0x02) +#define MISC_FW_DOORBELL_RESET2 (0x010) u8 driver_version[32]; }; -- 2.39.5