From d37761ecde5f151f4748309fedaa1db53832cc2c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 31 Jul 2014 19:11:00 +0200 Subject: [PATCH] thermal: exynos: remove dead code for HW_MODE calibration The commit 1928457 ("thermal: exynos: Add hardware mode thermal calibration support") has added HW_MODE feature but it has never been enabled. As such it has been a dead code for over a year now and should be removed from the kernel. We don't keep the unused/untested features in the kernel just in case that some future hardware might need it. Such code has a real maintainance cost (all other code changes have to take the dead code into account) and usually makes future changes more difficult, not easier (i.e. recent additions of Exynos5420 SoC and Exynos5260 SoC thermal support has not made use of any of the driver's currently unused/untested features, moreover the recently added code is more complex than needed because of the existing dead code). Also all removed dead code is still accessible in the kernel git repository and can be easily brought back if/when needed. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Tested-by: Amit Daniel Kachhap Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/exynos_tmu.c | 33 +---------------------- drivers/thermal/samsung/exynos_tmu.h | 13 --------- drivers/thermal/samsung/exynos_tmu_data.c | 3 --- drivers/thermal/samsung/exynos_tmu_data.h | 2 -- 4 files changed, 1 insertion(+), 50 deletions(-) diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index acbff14da3a4..4a55f112cc67 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -77,9 +77,6 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) struct exynos_tmu_platform_data *pdata = data->pdata; int temp_code; - if (pdata->cal_mode == HW_MODE) - return temp; - if (data->soc == SOC_ARCH_EXYNOS4210) /* temp should range between 25 and 125 */ if (temp < 25 || temp > 125) { @@ -114,9 +111,6 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) struct exynos_tmu_platform_data *pdata = data->pdata; int temp; - if (pdata->cal_mode == HW_MODE) - return temp_code; - if (data->soc == SOC_ARCH_EXYNOS4210) /* temp_code should range between 75 and 175 */ if (temp_code < 75 || temp_code > 175) { @@ -167,9 +161,6 @@ static int exynos_tmu_initialize(struct platform_device *pdev) if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) __raw_writel(1, data->base + reg->triminfo_ctrl); - if (pdata->cal_mode == HW_MODE) - goto skip_calib_data; - /* Save trimming info in order to perform calibration */ if (data->soc == SOC_ARCH_EXYNOS5440) { /* @@ -210,7 +201,6 @@ static int exynos_tmu_initialize(struct platform_device *pdev) (pdata->efuse_value >> reg->triminfo_85_shift) & EXYNOS_TMU_TEMP_MASK; -skip_calib_data: if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) { dev_err(&pdev->dev, "Invalid max trigger level\n"); ret = -EINVAL; @@ -325,7 +315,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int con, interrupt_en, cal_val; + unsigned int con, interrupt_en; mutex_lock(&data->lock); clk_enable(data->clk); @@ -351,27 +341,6 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); } - if (pdata->cal_mode == HW_MODE) { - con &= ~(reg->calib_mode_mask << reg->calib_mode_shift); - cal_val = 0; - switch (pdata->cal_type) { - case TYPE_TWO_POINT_TRIMMING: - cal_val = 3; - break; - case TYPE_ONE_POINT_TRIMMING_85: - cal_val = 2; - break; - case TYPE_ONE_POINT_TRIMMING_25: - cal_val = 1; - break; - case TYPE_NONE: - break; - default: - dev_err(&pdev->dev, "Invalid calibration type, using none\n"); - } - con |= cal_val << reg->calib_mode_shift; - } - if (on) { con |= (1 << reg->core_en_shift); interrupt_en = diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 44ca6337e945..789a8f70f45c 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -34,11 +34,6 @@ enum calibration_type { TYPE_NONE, }; -enum calibration_mode { - SW_MODE, - HW_MODE, -}; - enum soc_type { SOC_ARCH_EXYNOS3250 = 1, SOC_ARCH_EXYNOS4210, @@ -95,10 +90,6 @@ enum soc_type { * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl register. * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register. - * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl - register. - * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl - register. * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register. * @tmu_status: register drescribing the TMU status. * @tmu_cur_temp: register containing the current temperature of the TMU. @@ -143,8 +134,6 @@ struct exynos_tmu_registers { u32 therm_trip_en_shift; u32 buf_slope_sel_shift; u32 buf_slope_sel_mask; - u32 calib_mode_shift; - u32 calib_mode_mask; u32 core_en_shift; u32 tmu_status; @@ -226,7 +215,6 @@ struct exynos_tmu_registers { * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX * @cal_type: calibration type for temperature - * @cal_mode: calibration mode for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may * applicable to only some of the trigger levels. @@ -257,7 +245,6 @@ struct exynos_tmu_platform_data { u8 test_mux; enum calibration_type cal_type; - enum calibration_mode cal_mode; enum soc_type type; struct freq_clip_table freq_tab[4]; unsigned int freq_tab_count; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index d5cdfe524a3a..1d05bf8235aa 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -482,8 +482,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT, - .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK, .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, @@ -520,7 +518,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .reference_voltage = 16, \ .noise_cancel_mode = 4, \ .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .cal_mode = 0, \ .efuse_value = 0x5b2d, \ .min_efuse_value = 16, \ .max_efuse_value = 76, \ diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index 9337c5a36167..ac03b76c51cc 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -62,8 +62,6 @@ #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 -#define EXYNOS_TMU_CALIB_MODE_SHIFT 4 -#define EXYNOS_TMU_CALIB_MODE_MASK 0x3 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 -- 2.39.5