From d47a61aa228709fe1704e18a2f444661c10b81c0 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Mar 2012 14:41:05 +0530 Subject: [PATCH] ath9k: Fix multi-VIF BSS handling mac80211 provides short preamble information and ERP protection information on a per-BSS basis, which can be used. Remove flags stored in the driver, which was incorrect since they were being used in a global manner. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 16 ++++++---------- drivers/net/wireless/ath/ath9k/beacon.c | 6 +++--- drivers/net/wireless/ath/ath9k/main.c | 19 ------------------- drivers/net/wireless/ath/ath9k/rc.c | 3 ++- drivers/net/wireless/ath/ath9k/xmit.c | 4 +++- 5 files changed, 14 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 5ecec83117d6..8c84049682ab 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -584,16 +584,12 @@ struct ath_ant_comb { #define SC_OP_INVALID BIT(0) #define SC_OP_BEACONS BIT(1) #define SC_OP_OFFCHANNEL BIT(2) -#define SC_OP_PREAMBLE_SHORT BIT(3) -#define SC_OP_PROTECT_ENABLE BIT(4) -#define SC_OP_RXFLUSH BIT(5) -#define SC_OP_LED_ASSOCIATED BIT(6) -#define SC_OP_LED_ON BIT(7) -#define SC_OP_TSF_RESET BIT(8) -#define SC_OP_BT_PRIORITY_DETECTED BIT(9) -#define SC_OP_BT_SCAN BIT(10) -#define SC_OP_ANI_RUN BIT(11) -#define SC_OP_PRIM_STA_VIF BIT(12) +#define SC_OP_RXFLUSH BIT(3) +#define SC_OP_TSF_RESET BIT(4) +#define SC_OP_BT_PRIORITY_DETECTED BIT(5) +#define SC_OP_BT_SCAN BIT(6) +#define SC_OP_ANI_RUN BIT(7) +#define SC_OP_PRIM_STA_VIF BIT(8) /* Powersave flags */ #define PS_WAIT_FOR_BEACON BIT(0) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 43882f9e25c4..626418222c85 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -67,7 +67,7 @@ int ath_beaconq_config(struct ath_softc *sc) * up rate codes, and channel flags. Beacons are always sent out at the * lowest rate, and are not retried. */ -static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp, +static void ath_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif, struct ath_buf *bf, int rateidx) { struct sk_buff *skb = bf->bf_mpdu; @@ -82,7 +82,7 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp, sband = &sc->sbands[common->hw->conf.channel->band]; rate = sband->bitrates[rateidx].hw_value; - if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) + if (vif->bss_conf.use_short_preamble) rate |= sband->bitrates[rateidx].hw_value_short; memset(&info, 0, sizeof(info)); @@ -209,7 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw, } } - ath_beacon_setup(sc, avp, bf, info->control.rates[0].idx); + ath_beacon_setup(sc, vif, bf, info->control.rates[0].idx); while (skb) { ath_tx_cabq(hw, skb); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3f00daa0ea06..38794850f005 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2044,25 +2044,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, ath_beacon_config(sc, vif); } - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - ath_dbg(common, CONFIG, "BSS Changed PREAMBLE %d\n", - bss_conf->use_short_preamble); - if (bss_conf->use_short_preamble) - sc->sc_flags |= SC_OP_PREAMBLE_SHORT; - else - sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; - } - - if (changed & BSS_CHANGED_ERP_CTS_PROT) { - ath_dbg(common, CONFIG, "BSS Changed CTS PROT %d\n", - bss_conf->use_cts_prot); - if (bss_conf->use_cts_prot && - hw->conf.channel->band != IEEE80211_BAND_5GHZ) - sc->sc_flags |= SC_OP_PROTECT_ENABLE; - else - sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; - } - mutex_unlock(&sc->mutex); ath9k_ps_restore(sc); } diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index f26e9847bb2e..4f848493fece 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -748,7 +748,8 @@ static void ath_rc_rate_set_rtscts(struct ath_softc *sc, * If 802.11g protection is enabled, determine whether to use RTS/CTS or * just CTS. Note that this is only done for OFDM/HT unicast frames. */ - if ((sc->sc_flags & SC_OP_PROTECT_ENABLE) && + if ((tx_info->control.vif && + tx_info->control.vif->bss_conf.use_cts_prot) && (rate_table->info[rix].phy == WLAN_RC_PHY_OFDM || WLAN_RC_PHY_HT(rate_table->info[rix].phy))) { rates[0].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index d2c635d84fbc..5faec1e04d65 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -955,7 +955,9 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, */ rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info); info->rtscts_rate = rate->hw_value; - if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) + + if (tx_info->control.vif && + tx_info->control.vif->bss_conf.use_short_preamble) info->rtscts_rate |= rate->hw_value_short; for (i = 0; i < 4; i++) { -- 2.39.5