From d4cea38ebb4de90913085391ce4febde1a4ba9aa Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Wed, 12 Jul 2017 15:09:55 +0530 Subject: [PATCH] drm/msm/dsi: Calculate link clock rates with updated dsi->lanes After the commit mentioned below, we start computing the byte and pixel clocks (dsi_calc_clk_rate) in the DSI bridge's mode_set() op. The calculation involves the number of DSI lanes being used by the downstream bridge/panel. If the downstream bridge/panel tries to change the number of DSI lanes (as done in the ADV7533 driver) in its mode_set() op, then our DSI host driver will not have the correct number of lanes when computing byte/pixel clocks. Fix this by delaying the clock rate calculation in the DSI bridge enable path. In particular, compute the clock rates in msm_dsi_host_get_phy_clk_req(). This fixes the DSI host error interrupts seen when we try to switch between modes that require different number of lanes (4 to 3 lanes, or vice versa) on db410c. The error interrupts occur since the byte/pixel clock rates aren't according to what the DSI video mode timing engine expects. Fixes: b62aa70a98c5 ("drm/msm/dsi: Move PHY operations out of host") Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 9e9c5696bc03..c7b612c3d771 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -2137,6 +2137,13 @@ void msm_dsi_host_get_phy_clk_req(struct mipi_dsi_host *host, struct msm_dsi_phy_clk_request *clk_req) { struct msm_dsi_host *msm_host = to_msm_dsi_host(host); + int ret; + + ret = dsi_calc_clk_rate(msm_host); + if (ret) { + pr_err("%s: unable to calc clk rate, %d\n", __func__, ret); + return; + } clk_req->bitclk_rate = msm_host->byte_clk_rate * 8; clk_req->escclk_rate = msm_host->esc_clk_rate; @@ -2280,7 +2287,6 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host, struct drm_display_mode *mode) { struct msm_dsi_host *msm_host = to_msm_dsi_host(host); - int ret; if (msm_host->mode) { drm_mode_destroy(msm_host->dev, msm_host->mode); @@ -2293,12 +2299,6 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host, return -ENOMEM; } - ret = dsi_calc_clk_rate(msm_host); - if (ret) { - pr_err("%s: unable to calc clk rate, %d\n", __func__, ret); - return ret; - } - return 0; } -- 2.39.5