From d509e205d81f074a9b8d93ac80ab56405dede48b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 29 Jun 2016 20:46:59 +0200 Subject: [PATCH] ARM: dts: sun5i: Enable otg on the auxtex t004 The auxtek t004 has its otg usb vbus hardwired to 5v (likely in case people use it to power the board instead of the dedicated power micro usb connector), it does have an id pin, so it allows full otg functionality. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index a790ec8adb75..2150e15e115a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -124,7 +124,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_t004: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; @@ -158,11 +169,19 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usb1_vbus_pin_a { allwinner,pins = "PG13"; }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; -- 2.39.5