From d534bacd918fcf0909039b95db7c090702e739d5 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 30 Nov 2010 16:00:01 +0200 Subject: [PATCH] ASoC: tpa6130a2: Defer SW enable from power enable Do not enable the amplifier right after the power has been restored to the amplifier. The DAPM_SUPPLY widget turns on the amp early in the DAPM power walk, and the unmuting of channel happens quite late. Keeping the amp in SW reset state ensures better muting. In this way the pop noise coming from other components (codec) can be filtered out. Signed-off-by: Peter Ujfalusi Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- sound/soc/codecs/tpa6130a2.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index 199edf07f47e..42887ae1568b 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -151,11 +151,6 @@ static int tpa6130a2_power(u8 power) data->power_state = 0; goto exit; } - - /* Clear SWS */ - val = tpa6130a2_read(TPA6130A2_REG_CONTROL); - val &= ~TPA6130A2_SWS; - tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); } else { /* set SWS */ val = tpa6130a2_read(TPA6130A2_REG_CONTROL); @@ -301,6 +296,7 @@ static void tpa6130a2_channel_enable(u8 channel, int enable) /* Enable amplifier */ val = tpa6130a2_read(TPA6130A2_REG_CONTROL); val |= channel; + val &= ~TPA6130A2_SWS; tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); /* Unmute channel */ -- 2.39.5