From d5a2b34fddf0026712fd31324aae3fa363b16d20 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 8 May 2013 16:13:14 -0700 Subject: [PATCH] ARM: dts: Configure and fix the McSPI pins for 4430sdp The bootloader configures the pins, but has pull bits set without pull enable bits. While this is harmless, and won't do anything, it seems to cause confusion at least for me every time looking at the pin configuration. Fix it for DT based boot. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-sdp.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 25cbe43fa08a..a35d9cd58063 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -223,6 +223,15 @@ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */ + 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */ + 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */ + 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/ + >; + }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ @@ -358,6 +367,9 @@ }; &mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + eth@0 { compatible = "ks8851"; spi-max-frequency = <24000000>; -- 2.39.5