From d64eab764aaf1455d4cd790e3651a2d65b69e661 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 6 Oct 2010 22:51:09 -0700 Subject: [PATCH] [SCSI] qla4xxx: remove unwanted check for bad spd Signed-off-by: Vikas Chaudhary Signed-off-by: Saurav Kashyap Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_nx.c | 17 ----------------- drivers/scsi/qla4xxx/ql4_nx.h | 3 --- 2 files changed, 20 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 74582cb46a28..474b10d71364 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -1081,21 +1081,6 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) return 0; } -static int qla4_8xxx_check_for_bad_spd(struct scsi_qla_host *ha) -{ - u32 val = 0; - val = qla4_8xxx_rd_32(ha, BOOT_LOADER_DIMM_STATUS) ; - val &= QLA82XX_BOOT_LOADER_MN_ISSUE; - if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) { - printk("Memory DIMM SPD not programmed. Assumed valid.\n"); - return 1; - } else if (val) { - printk("Memory DIMM type incorrect. Info:%08X.\n", val); - return 2; - } - return 0; -} - static int qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start) { @@ -1380,8 +1365,6 @@ static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val) } while (--retries); - qla4_8xxx_check_for_bad_spd(ha); - if (!retries) { pegtune_val = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE); diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h index 95f3060ad027..ff689bf53007 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.h +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -24,7 +24,6 @@ #define CRB_CMDPEG_STATE QLA82XX_REG(0x50) #define CRB_RCVPEG_STATE QLA82XX_REG(0x13c) -#define BOOT_LOADER_DIMM_STATUS QLA82XX_REG(0x54) #define CRB_DMA_SHIFT QLA82XX_REG(0xcc) #define QLA82XX_HW_H0_CH_HUB_ADR 0x05 @@ -529,8 +528,6 @@ # define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000) # define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg)) -#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000 -#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff #define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24)) #define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8)) #define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac)) -- 2.39.5