From d894be57ca92c8a8819ab544d550809e8731137b Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 20 Oct 2016 13:55:16 -0400 Subject: [PATCH] ethernet: use net core MTU range checking in more drivers Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen CC: Netanel Belgazal CC: Tom Lendacky CC: Santosh Raspatur CC: Hariprasad S CC: Sathya Perla CC: Ajit Khaparde CC: Sriharsha Basavapatna CC: Somnath Kotur CC: Thomas Falcon CC: John Allen CC: Guo-Fu Tseng CC: Sebastian Hesselbarth CC: Jiri Pirko CC: Ido Schimmel CC: Manish Chopra CC: Sony Chacko CC: Rajesh Borundia CC: Timur Tabi CC: Anirudha Sarangi CC: John Linn Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/alteon/acenic.c | 5 ++--- drivers/net/ethernet/amazon/ena/ena_netdev.c | 9 ++------ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 5 ----- drivers/net/ethernet/amd/xgbe/xgbe-main.c | 2 ++ drivers/net/ethernet/broadcom/sb1250-mac.c | 12 ++-------- .../net/ethernet/chelsio/cxgb3/cxgb3_main.c | 4 ++-- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 6 +++-- .../ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 6 ++--- drivers/net/ethernet/emulex/benet/be_main.c | 22 ++++--------------- drivers/net/ethernet/ibm/ibmveth.c | 6 ++--- drivers/net/ethernet/ibm/ibmvnic.c | 16 ++++---------- drivers/net/ethernet/jme.c | 12 ++++------ drivers/net/ethernet/marvell/mv643xx_eth.c | 7 +++--- .../net/ethernet/mellanox/mlxsw/spectrum.c | 3 +++ .../net/ethernet/mellanox/mlxsw/switchx2.c | 3 +++ drivers/net/ethernet/natsemi/ns83820.c | 11 ++-------- .../ethernet/qlogic/netxen/netxen_nic_hw.c | 12 ---------- .../ethernet/qlogic/netxen/netxen_nic_main.c | 7 ++++++ drivers/net/ethernet/qlogic/qlge/qlge_main.c | 7 ++++++ drivers/net/ethernet/qualcomm/emac/emac.c | 13 +++++------ .../net/ethernet/xilinx/xilinx_axienet_main.c | 7 +++--- include/uapi/linux/if_ether.h | 1 + 22 files changed, 68 insertions(+), 108 deletions(-) diff --git a/drivers/net/ethernet/alteon/acenic.c b/drivers/net/ethernet/alteon/acenic.c index b90a26b13fdf..a5c1e290677a 100644 --- a/drivers/net/ethernet/alteon/acenic.c +++ b/drivers/net/ethernet/alteon/acenic.c @@ -474,6 +474,8 @@ static int acenic_probe_one(struct pci_dev *pdev, dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; dev->watchdog_timeo = 5*HZ; + dev->min_mtu = 0; + dev->max_mtu = ACE_JUMBO_MTU; dev->netdev_ops = &ace_netdev_ops; dev->ethtool_ops = &ace_ethtool_ops; @@ -2548,9 +2550,6 @@ static int ace_change_mtu(struct net_device *dev, int new_mtu) struct ace_private *ap = netdev_priv(dev); struct ace_regs __iomem *regs = ap->regs; - if (new_mtu > ACE_JUMBO_MTU) - return -EINVAL; - writel(new_mtu + ETH_HLEN + 4, ®s->IfMtu); dev->mtu = new_mtu; diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index bfeaec5bd7b9..2a55ab00686a 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -103,13 +103,6 @@ static int ena_change_mtu(struct net_device *dev, int new_mtu) struct ena_adapter *adapter = netdev_priv(dev); int ret; - if ((new_mtu > adapter->max_mtu) || (new_mtu < ENA_MIN_MTU)) { - netif_err(adapter, drv, dev, - "Invalid MTU setting. new_mtu: %d\n", new_mtu); - - return -EINVAL; - } - ret = ena_com_set_dev_mtu(adapter->ena_dev, new_mtu); if (!ret) { netif_dbg(adapter, drv, dev, "set MTU to %d\n", new_mtu); @@ -2755,6 +2748,8 @@ static void ena_set_conf_feat_params(struct ena_adapter *adapter, ena_set_dev_offloads(feat, netdev); adapter->max_mtu = feat->dev_attr.max_mtu; + netdev->max_mtu = adapter->max_mtu; + netdev->min_mtu = ENA_MIN_MTU; } static int ena_rss_init_default(struct ena_adapter *adapter) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 7f9216db026f..c4e668208e04 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -257,11 +257,6 @@ static int xgbe_calc_rx_buf_size(struct net_device *netdev, unsigned int mtu) { unsigned int rx_buf_size; - if (mtu > XGMAC_JUMBO_PACKET_MTU) { - netdev_alert(netdev, "MTU exceeds maximum supported value\n"); - return -EINVAL; - } - rx_buf_size = mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; rx_buf_size = clamp_val(rx_buf_size, XGBE_RX_MIN_BUF_SIZE, PAGE_SIZE); diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c index 9de078819aa6..667e1209a2f5 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c @@ -738,6 +738,8 @@ static int xgbe_probe(struct platform_device *pdev) pdata->netdev_features = netdev->features; netdev->priv_flags |= IFF_UNICAST_FLT; + netdev->min_mtu = 0; + netdev->max_mtu = XGMAC_JUMBO_PACKET_MTU; /* Use default watchdog timeout */ netdev->watchdog_timeo = 0; diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c index f1b81187a201..cb312e4c89f4 100644 --- a/drivers/net/ethernet/broadcom/sb1250-mac.c +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c @@ -2147,15 +2147,6 @@ static void sbmac_setmulti(struct sbmac_softc *sc) } } -static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) -{ - if (new_mtu > ENET_PACKET_SIZE) - return -EINVAL; - _dev->mtu = new_mtu; - pr_info("changing the mtu to %d\n", new_mtu); - return 0; -} - static const struct net_device_ops sbmac_netdev_ops = { .ndo_open = sbmac_open, .ndo_stop = sbmac_close, @@ -2163,7 +2154,6 @@ static const struct net_device_ops sbmac_netdev_ops = { .ndo_set_rx_mode = sbmac_set_rx_mode, .ndo_tx_timeout = sbmac_tx_timeout, .ndo_do_ioctl = sbmac_mii_ioctl, - .ndo_change_mtu = sb1250_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2229,6 +2219,8 @@ static int sbmac_init(struct platform_device *pldev, long long base) dev->netdev_ops = &sbmac_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; + dev->max_mtu = 0; + dev->max_mtu = ENET_PACKET_SIZE; netif_napi_add(dev, &sc->napi, sbmac_poll, 16); diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 43da891fab97..092b3c16440b 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -2531,8 +2531,6 @@ static int cxgb_change_mtu(struct net_device *dev, int new_mtu) struct adapter *adapter = pi->adapter; int ret; - if (new_mtu < 81) /* accommodate SACK */ - return -EINVAL; if ((ret = t3_mac_set_mtu(&pi->mac, new_mtu))) return ret; dev->mtu = new_mtu; @@ -3295,6 +3293,8 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->netdev_ops = &cxgb_netdev_ops; netdev->ethtool_ops = &cxgb_ethtool_ops; + netdev->min_mtu = 81; + netdev->max_mtu = ETH_MAX_MTU; } pci_set_drvdata(pdev, adapter); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index f320497368f4..b0bb23f95beb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -2502,8 +2502,6 @@ static int cxgb_change_mtu(struct net_device *dev, int new_mtu) int ret; struct port_info *pi = netdev_priv(dev); - if (new_mtu < 81 || new_mtu > MAX_MTU) /* accommodate SACK */ - return -EINVAL; ret = t4_set_rxmode(pi->adapter, pi->adapter->pf, pi->viid, new_mtu, -1, -1, -1, -1, true); if (!ret) @@ -4803,6 +4801,10 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 81 - 9600 */ + netdev->min_mtu = 81; + netdev->max_mtu = MAX_MTU; + netdev->netdev_ops = &cxgb4_netdev_ops; #ifdef CONFIG_CHELSIO_T4_DCB netdev->dcbnl_ops = &cxgb4_dcb_ops; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index 100b2cc064a3..5d4da0e8acaa 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -1108,10 +1108,6 @@ static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu) int ret; struct port_info *pi = netdev_priv(dev); - /* accommodate SACK */ - if (new_mtu < 81) - return -EINVAL; - ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu, -1, -1, -1, -1, true); if (!ret) @@ -2966,6 +2962,8 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_HIGHDMA; netdev->priv_flags |= IFF_UNICAST_FLT; + netdev->min_mtu = 81; + netdev->max_mtu = ETH_MAX_MTU; netdev->netdev_ops = &cxgb4vf_netdev_ops; netdev->ethtool_ops = &cxgb4vf_ethtool_ops; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index cece8a08edca..3f6152cc648c 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1406,23 +1406,6 @@ drop: return NETDEV_TX_OK; } -static int be_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct be_adapter *adapter = netdev_priv(netdev); - struct device *dev = &adapter->pdev->dev; - - if (new_mtu < BE_MIN_MTU || new_mtu > BE_MAX_MTU) { - dev_info(dev, "MTU must be between %d and %d bytes\n", - BE_MIN_MTU, BE_MAX_MTU); - return -EINVAL; - } - - dev_info(dev, "MTU changed from %d to %d bytes\n", - netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - return 0; -} - static inline bool be_in_all_promisc(struct be_adapter *adapter) { return (adapter->if_flags & BE_IF_FLAGS_ALL_PROMISCUOUS) == @@ -5216,7 +5199,6 @@ static const struct net_device_ops be_netdev_ops = { .ndo_start_xmit = be_xmit, .ndo_set_rx_mode = be_set_rx_mode, .ndo_set_mac_address = be_mac_addr_set, - .ndo_change_mtu = be_change_mtu, .ndo_get_stats64 = be_get_stats64, .ndo_validate_addr = eth_validate_addr, .ndo_vlan_rx_add_vid = be_vlan_add_vid, @@ -5266,6 +5248,10 @@ static void be_netdev_init(struct net_device *netdev) netdev->netdev_ops = &be_netdev_ops; netdev->ethtool_ops = &be_ethtool_ops; + + /* MTU range: 256 - 9000 */ + netdev->min_mtu = BE_MIN_MTU; + netdev->max_mtu = BE_MAX_MTU; } static void be_cleanup(struct be_adapter *adapter) diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index ebe60719e489..29c05d0d79a9 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1349,9 +1349,6 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu) int i, rc; int need_restart = 0; - if (new_mtu < IBMVETH_MIN_MTU) - return -EINVAL; - for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) if (new_mtu_oh <= adapter->rx_buff_pool[i].buff_size) break; @@ -1551,6 +1548,9 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) netdev->hw_features |= NETIF_F_TSO; } + netdev->min_mtu = IBMVETH_MIN_MTU; + netdev->min_mtu = ETH_MAX_MTU; + memcpy(netdev->dev_addr, mac_addr_p, ETH_ALEN); if (firmware_has_feature(FW_FEATURE_CMO)) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index bfe17d9c022d..657206be7ba9 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -902,17 +902,6 @@ static int ibmvnic_set_mac(struct net_device *netdev, void *p) return 0; } -static int ibmvnic_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct ibmvnic_adapter *adapter = netdev_priv(netdev); - - if (new_mtu > adapter->req_mtu || new_mtu < adapter->min_mtu) - return -EINVAL; - - netdev->mtu = new_mtu; - return 0; -} - static void ibmvnic_tx_timeout(struct net_device *dev) { struct ibmvnic_adapter *adapter = netdev_priv(dev); @@ -1029,7 +1018,6 @@ static const struct net_device_ops ibmvnic_netdev_ops = { .ndo_set_rx_mode = ibmvnic_set_multi, .ndo_set_mac_address = ibmvnic_set_mac, .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = ibmvnic_change_mtu, .ndo_tx_timeout = ibmvnic_tx_timeout, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ibmvnic_netpoll_controller, @@ -2638,10 +2626,12 @@ static void handle_query_cap_rsp(union ibmvnic_crq *crq, break; case MIN_MTU: adapter->min_mtu = be64_to_cpu(crq->query_capability.number); + netdev->min_mtu = adapter->min_mtu; netdev_dbg(netdev, "min_mtu = %lld\n", adapter->min_mtu); break; case MAX_MTU: adapter->max_mtu = be64_to_cpu(crq->query_capability.number); + netdev->max_mtu = adapter->max_mtu; netdev_dbg(netdev, "max_mtu = %lld\n", adapter->max_mtu); break; case MAX_MULTICAST_FILTERS: @@ -3654,6 +3644,8 @@ static void handle_crq_init_rsp(struct work_struct *work) goto task_failed; netdev->real_num_tx_queues = adapter->req_tx_queues; + netdev->min_mtu = adapter->min_mtu; + netdev->max_mtu = adapter->max_mtu; if (adapter->failover) { adapter->failover = false; diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 836ebd8ee768..f9fcab54783c 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -2357,14 +2357,6 @@ jme_change_mtu(struct net_device *netdev, int new_mtu) { struct jme_adapter *jme = netdev_priv(netdev); - if (new_mtu == jme->old_mtu) - return 0; - - if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) || - ((new_mtu) < IPV6_MIN_MTU)) - return -EINVAL; - - netdev->mtu = new_mtu; netdev_update_features(netdev); @@ -3063,6 +3055,10 @@ jme_init_one(struct pci_dev *pdev, if (using_dac) netdev->features |= NETIF_F_HIGHDMA; + /* MTU range: 1280 - 9202*/ + netdev->min_mtu = IPV6_MIN_MTU; + netdev->max_mtu = MAX_ETHERNET_JUMBO_PACKET_SIZE - ETH_HLEN; + SET_NETDEV_DEV(netdev, &pdev->dev); pci_set_drvdata(pdev, netdev); diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 18e6bb6e3867..68675d83bdc5 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2585,9 +2585,6 @@ static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu) { struct mv643xx_eth_private *mp = netdev_priv(dev); - if (new_mtu < 64 || new_mtu > 9500) - return -EINVAL; - dev->mtu = new_mtu; mv643xx_eth_recalc_skb_size(mp); tx_set_rate(mp, 1000000000, 16777216); @@ -3206,6 +3203,10 @@ static int mv643xx_eth_probe(struct platform_device *pdev) dev->priv_flags |= IFF_UNICAST_FLT; dev->gso_max_segs = MV643XX_MAX_TSO_SEGS; + /* MTU range: 64 - 9500 */ + dev->min_mtu = 64; + dev->max_mtu = 9500; + SET_NETDEV_DEV(dev, &pdev->dev); if (mp->shared->win_protect) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 99805fd3d110..6d8cb22579ee 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2284,6 +2284,9 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC; dev->hw_features |= NETIF_F_HW_TC; + dev->min_mtu = 0; + dev->max_mtu = ETH_MAX_MTU; + /* Each packet needs to have a Tx header (metadata) on top all other * headers. */ diff --git a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c index c0c23e2f3275..66af63d99b8b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c +++ b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c @@ -994,6 +994,9 @@ static int mlxsw_sx_port_create(struct mlxsw_sx *mlxsw_sx, u8 local_port) dev->features |= NETIF_F_NETNS_LOCAL | NETIF_F_LLTX | NETIF_F_SG | NETIF_F_VLAN_CHALLENGED; + dev->min_mtu = 0; + dev->max_mtu = ETH_MAX_MTU; + /* Each packet needs to have a Tx header (metadata) on top all other * headers. */ diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c index 569ade6cf85c..a34631ed741d 100644 --- a/drivers/net/ethernet/natsemi/ns83820.c +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -1679,14 +1679,6 @@ static void ns83820_getmac(struct ns83820 *dev, u8 *mac) } } -static int ns83820_change_mtu(struct net_device *ndev, int new_mtu) -{ - if (new_mtu > RX_BUF_SIZE) - return -EINVAL; - ndev->mtu = new_mtu; - return 0; -} - static void ns83820_set_multicast(struct net_device *ndev) { struct ns83820 *dev = PRIV(ndev); @@ -1933,7 +1925,6 @@ static const struct net_device_ops netdev_ops = { .ndo_stop = ns83820_stop, .ndo_start_xmit = ns83820_hard_start_xmit, .ndo_get_stats = ns83820_get_stats, - .ndo_change_mtu = ns83820_change_mtu, .ndo_set_rx_mode = ns83820_set_multicast, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, @@ -2190,6 +2181,8 @@ static int ns83820_init_one(struct pci_dev *pci_dev, ndev->features |= NETIF_F_SG; ndev->features |= NETIF_F_IP_CSUM; + ndev->min_mtu = 0; + #ifdef NS83820_VLAN_ACCEL_SUPPORT /* We also support hardware vlan acceleration */ ndev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c index 2b10f1bcd151..a996801d442d 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c @@ -987,20 +987,8 @@ int netxen_send_lro_cleanup(struct netxen_adapter *adapter) int netxen_nic_change_mtu(struct net_device *netdev, int mtu) { struct netxen_adapter *adapter = netdev_priv(netdev); - int max_mtu; int rc = 0; - if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) - max_mtu = P3_MAX_MTU; - else - max_mtu = P2_MAX_MTU; - - if (mtu > max_mtu) { - printk(KERN_ERR "%s: mtu > %d bytes unsupported\n", - netdev->name, max_mtu); - return -EINVAL; - } - if (adapter->set_mtu) rc = adapter->set_mtu(adapter, mtu); diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 7a0281a36c28..561fb94c7267 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1572,6 +1572,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->physical_port = i; } + /* MTU range: 0 - 8000 (P2) or 9600 (P3) */ + netdev->min_mtu = 0; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + netdev->max_mtu = P3_MAX_MTU; + else + netdev->max_mtu = P2_MAX_MTU; + netxen_nic_clear_stats(adapter); err = netxen_setup_intr(adapter); diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index fd4a8e473f11..1409412ab39d 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4788,6 +4788,13 @@ static int qlge_probe(struct pci_dev *pdev, ndev->ethtool_ops = &qlge_ethtool_ops; ndev->watchdog_timeo = 10 * HZ; + /* MTU range: this driver only supports 1500 or 9000, so this only + * filters out values above or below, and we'll rely on + * qlge_change_mtu to make sure only 1500 or 9000 are allowed + */ + ndev->min_mtu = ETH_DATA_LEN; + ndev->max_mtu = 9000; + err = register_netdev(ndev); if (err) { dev_err(&pdev->dev, "net device registration failed.\n"); diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 9bf3b2b82e95..e4e1925d18a4 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -239,15 +239,8 @@ static void emac_rx_mode_set(struct net_device *netdev) /* Change the Maximum Transfer Unit (MTU) */ static int emac_change_mtu(struct net_device *netdev, int new_mtu) { - unsigned int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; struct emac_adapter *adpt = netdev_priv(netdev); - if ((max_frame < EMAC_MIN_ETH_FRAME_SIZE) || - (max_frame > EMAC_MAX_ETH_FRAME_SIZE)) { - netdev_err(adpt->netdev, "error: invalid MTU setting\n"); - return -EINVAL; - } - netif_info(adpt, hw, adpt->netdev, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -679,6 +672,12 @@ static int emac_probe(struct platform_device *pdev) netdev->vlan_features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6; + /* MTU range: 46 - 9194 */ + netdev->min_mtu = EMAC_MIN_ETH_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + netdev->max_mtu = EMAC_MAX_ETH_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + INIT_WORK(&adpt->work_thread, emac_work_thread); /* Initialize queues */ diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index c688d68c39aa..c9c8a3be9f1b 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1034,9 +1034,6 @@ static int axienet_change_mtu(struct net_device *ndev, int new_mtu) XAE_TRL_SIZE) > lp->rxmem) return -EINVAL; - if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64)) - return -EINVAL; - ndev->mtu = new_mtu; return 0; @@ -1475,6 +1472,10 @@ static int axienet_probe(struct platform_device *pdev) ndev->netdev_ops = &axienet_netdev_ops; ndev->ethtool_ops = &axienet_ethtool_ops; + /* MTU range: 64 - 9000 */ + ndev->min_mtu = 64; + ndev->max_mtu = XAE_JUMBO_MTU; + lp = netdev_priv(ndev); lp->ndev = ndev; lp->dev = &pdev->dev; diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 864d6f2b2cb0..3e5185e9ef03 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -36,6 +36,7 @@ #define ETH_FCS_LEN 4 /* Octets in the FCS */ #define ETH_MIN_MTU 68 /* Min IPv4 MTU per RFC791 */ +#define ETH_MAX_MTU 0xFFFFU /* 65535, same as IP_MAX_MTU */ /* * These are the defined Ethernet Protocol ID's. -- 2.39.5