From d8fed1e254ba1ed38fd2977fdac4c2e35ed5dbc1 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 6 Apr 2012 01:32:02 -0700
Subject: [PATCH] ARM: mach-shmobile: armadillo800eva: add support sh_eth

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 .../arm/mach-shmobile/board-armadillo800eva.c | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 0bce9b88b9c2..d439e7f76187 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/sh_eth.h>
 #include <linux/videodev2.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -96,6 +97,38 @@
  *-----------+---------------+----------------------------
  */
 
+/* Ether */
+static struct sh_eth_plat_data sh_eth_platdata = {
+	.phy			= 0x00, /* LAN8710A */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.register_type		= SH_ETH_REG_GIGABIT,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth_resources[] = {
+	{
+		.start	= 0xe9a00000,
+		.end	= 0xe9a00800 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xe9a01800,
+		.end	= 0xe9a02000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x0500),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.dev = {
+		.platform_data = &sh_eth_platdata,
+	},
+	.resource = sh_eth_resources,
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+};
+
 /* LCDC */
 static struct fb_videomode lcdc0_mode = {
 	.name		= "AMPIER/AM-800480",
@@ -180,6 +213,7 @@ static struct platform_device gpio_keys_device = {
 static struct platform_device *eva_devices[] __initdata = {
 	&lcdc0_device,
 	&gpio_keys_device,
+	&sh_eth_device,
 };
 
 /*
@@ -231,6 +265,30 @@ static void __init eva_init(void)
 	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
 	gpio_direction_output(GPIO_PORT202, 0);
 
+	/* GETHER */
+	gpio_request(GPIO_FN_ET_CRS,		NULL);
+	gpio_request(GPIO_FN_ET_MDC,		NULL);
+	gpio_request(GPIO_FN_ET_MDIO,		NULL);
+	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
+	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
+	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
+	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
+	gpio_request(GPIO_FN_ET_COL,		NULL);
+	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
+	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
+
+	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+	gpio_direction_output(GPIO_PORT18, 1);
+
 	/*
 	 * CAUTION
 	 *
-- 
2.39.5