From daefb6961cc64745c285b279d938b1854f74f870 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 7 Jul 2012 20:59:09 +0800 Subject: [PATCH] ARM: dts: imx28: move extra gpmi-nand pins into board dts Only pins GPMI_CE0N and GPMI_READY0 are generally used by other boards. Move GPMI_CE1N and GPMI_READY1 into imx28-evk.dts to make gpmi_pins_a more general, and can be used by other boards. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-evk.dts | 14 +++++++++++++- arch/arm/boot/dts/imx28.dtsi | 2 -- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 0d8739dda1af..0444964dae56 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -24,7 +24,8 @@ apbh@80000000 { gpmi-nand@8000c000 { pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; status = "okay"; }; @@ -64,6 +65,17 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; lcdif@80030000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index adb5ffc2ff0d..2874adcafad3 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -198,9 +198,7 @@ 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ - 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ - 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ -- 2.39.5