From dba4b74d2da8798626e2b702ad3f452671e335f7 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Wed, 1 Oct 2014 15:05:25 +0300 Subject: [PATCH] wil6210: atomic I/O for the card memory Introduce netdev IOCTLs, to be used by the debug tools. Allows to read/write single dword value or memory block, aligned to dword Different address modes supported: - BAR offset - Firmware "linker" address - target's AHB bus Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- MAINTAINERS | 1 + drivers/net/wireless/ath/wil6210/Makefile | 1 + drivers/net/wireless/ath/wil6210/ioctl.c | 173 +++++++++++++++++++++ drivers/net/wireless/ath/wil6210/netdev.c | 12 ++ drivers/net/wireless/ath/wil6210/wil6210.h | 2 + include/uapi/linux/wil6210_uapi.h | 87 +++++++++++ 6 files changed, 276 insertions(+) create mode 100644 drivers/net/wireless/ath/wil6210/ioctl.c create mode 100644 include/uapi/linux/wil6210_uapi.h diff --git a/MAINTAINERS b/MAINTAINERS index 482888d80431..66de6b2923d4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1611,6 +1611,7 @@ L: wil6210@qca.qualcomm.com S: Supported W: http://wireless.kernel.org/en/users/Drivers/wil6210 F: drivers/net/wireless/ath/wil6210/ +F: include/uapi/linux/wil6210_uapi.h CARL9170 LINUX COMMUNITY WIRELESS DRIVER M: Christian Lamparter diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile index 05f29a6b1ba8..8ad4b5f97e04 100644 --- a/drivers/net/wireless/ath/wil6210/Makefile +++ b/drivers/net/wireless/ath/wil6210/Makefile @@ -10,6 +10,7 @@ wil6210-y += interrupt.o wil6210-y += txrx.o wil6210-y += debug.o wil6210-y += rx_reorder.o +wil6210-y += ioctl.o wil6210-y += fw.o wil6210-$(CONFIG_WIL6210_TRACING) += trace.o wil6210-y += wil_platform.o diff --git a/drivers/net/wireless/ath/wil6210/ioctl.c b/drivers/net/wireless/ath/wil6210/ioctl.c new file mode 100644 index 000000000000..e9c0673819c6 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/ioctl.c @@ -0,0 +1,173 @@ +/* + * Copyright (c) 2014 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +#include "wil6210.h" +#include + +#define wil_hex_dump_ioctl(prefix_str, buf, len) \ + print_hex_dump_debug("DBG[IOC ]" prefix_str, \ + DUMP_PREFIX_OFFSET, 16, 1, buf, len, true) +#define wil_dbg_ioctl(wil, fmt, arg...) wil_dbg(wil, "DBG[IOC ]" fmt, ##arg) + +static void __iomem *wil_ioc_addr(struct wil6210_priv *wil, uint32_t addr, + uint32_t size, enum wil_memio_op op) +{ + void __iomem *a; + u32 off; + + switch (op & wil_mmio_addr_mask) { + case wil_mmio_addr_linker: + a = wmi_buffer(wil, cpu_to_le32(addr)); + break; + case wil_mmio_addr_ahb: + a = wmi_addr(wil, addr); + break; + case wil_mmio_addr_bar: + a = wmi_addr(wil, addr + WIL6210_FW_HOST_OFF); + break; + default: + wil_err(wil, "Unsupported address mode, op = 0x%08x\n", op); + return NULL; + } + + off = a - wil->csr; + if (size >= WIL6210_MEM_SIZE - off) { + wil_err(wil, "Requested block does not fit into memory: " + "off = 0x%08x size = 0x%08x\n", off, size); + return NULL; + } + + return a; +} + +static int wil_ioc_memio_dword(struct wil6210_priv *wil, void __user *data) +{ + struct wil_memio io; + void __iomem *a; + bool need_copy = false; + + if (copy_from_user(&io, data, sizeof(io))) + return -EFAULT; + + wil_dbg_ioctl(wil, "IO: addr = 0x%08x val = 0x%08x op = 0x%08x\n", + io.addr, io.val, io.op); + + a = wil_ioc_addr(wil, io.addr, sizeof(u32), io.op); + if (!a) { + wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr, + io.op); + return -EINVAL; + } + /* operation */ + switch (io.op & wil_mmio_op_mask) { + case wil_mmio_read: + io.val = ioread32(a); + need_copy = true; + break; + case wil_mmio_write: + iowrite32(io.val, a); + wmb(); /* make sure write propagated to HW */ + break; + default: + wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op); + return -EINVAL; + } + + if (need_copy) { + wil_dbg_ioctl(wil, "IO done: addr = 0x%08x" + " val = 0x%08x op = 0x%08x\n", + io.addr, io.val, io.op); + if (copy_to_user(data, &io, sizeof(io))) + return -EFAULT; + } + + return 0; +} + +static int wil_ioc_memio_block(struct wil6210_priv *wil, void __user *data) +{ + struct wil_memio_block io; + void *block; + void __iomem *a; + int rc = 0; + + if (copy_from_user(&io, data, sizeof(io))) + return -EFAULT; + + wil_dbg_ioctl(wil, "IO: addr = 0x%08x size = 0x%08x op = 0x%08x\n", + io.addr, io.size, io.op); + + /* size */ + if (io.size % 4) { + wil_err(wil, "size is not multiple of 4: 0x%08x\n", io.size); + return -EINVAL; + } + + a = wil_ioc_addr(wil, io.addr, io.size, io.op); + if (!a) { + wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr, + io.op); + return -EINVAL; + } + + block = kmalloc(io.size, GFP_USER); + if (!block) + return -ENOMEM; + + /* operation */ + switch (io.op & wil_mmio_op_mask) { + case wil_mmio_read: + wil_memcpy_fromio_32(block, a, io.size); + wil_hex_dump_ioctl("Read ", block, io.size); + if (copy_to_user(io.block, block, io.size)) { + rc = -EFAULT; + goto out_free; + } + break; + case wil_mmio_write: + if (copy_from_user(block, io.block, io.size)) { + rc = -EFAULT; + goto out_free; + } + wil_memcpy_toio_32(a, block, io.size); + wmb(); /* make sure write propagated to HW */ + wil_hex_dump_ioctl("Write ", block, io.size); + break; + default: + wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op); + rc = -EINVAL; + break; + } + +out_free: + kfree(block); + return rc; +} + +int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd) +{ + switch (cmd) { + case WIL_IOCTL_MEMIO: + return wil_ioc_memio_dword(wil, data); + case WIL_IOCTL_MEMIO_BLOCK: + return wil_ioc_memio_block(wil, data); + default: + wil_dbg_ioctl(wil, "Unsupported IOCTL 0x%04x\n", cmd); + return -ENOIOCTLCMD; + } +} diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c index c3f0ddfaa5da..239965106c05 100644 --- a/drivers/net/wireless/ath/wil6210/netdev.c +++ b/drivers/net/wireless/ath/wil6210/netdev.c @@ -52,6 +52,17 @@ static int wil_change_mtu(struct net_device *ndev, int new_mtu) return 0; } +static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) +{ + struct wil6210_priv *wil = ndev_to_wil(ndev); + + int ret = wil_ioctl(wil, ifr->ifr_data, cmd); + + wil_dbg_misc(wil, "ioctl(0x%04x) -> %d\n", cmd, ret); + + return ret; +} + static const struct net_device_ops wil_netdev_ops = { .ndo_open = wil_open, .ndo_stop = wil_stop, @@ -59,6 +70,7 @@ static const struct net_device_ops wil_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = wil_change_mtu, + .ndo_do_ioctl = wil_do_ioctl, }; static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget) diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 2991609885f7..61cceca155a2 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -595,5 +595,7 @@ void wil6210_unmask_irq_rx(struct wil6210_priv *wil); int wil_iftype_nl2wmi(enum nl80211_iftype type); +int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd); int wil_request_firmware(struct wil6210_priv *wil, const char *name); + #endif /* __WIL6210_H__ */ diff --git a/include/uapi/linux/wil6210_uapi.h b/include/uapi/linux/wil6210_uapi.h new file mode 100644 index 000000000000..6a3cddd156c4 --- /dev/null +++ b/include/uapi/linux/wil6210_uapi.h @@ -0,0 +1,87 @@ +/* + * Copyright (c) 2014 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __WIL6210_UAPI_H__ +#define __WIL6210_UAPI_H__ + +#if !defined(__KERNEL__) +#define __user +#endif + +#include + +/* Numbers SIOCDEVPRIVATE and SIOCDEVPRIVATE + 1 + * are used by Android devices to implement PNO (preferred network offload). + * Albeit it is temporary solution, use different numbers to avoid conflicts + */ + +/** + * Perform 32-bit I/O operation to the card memory + * + * User code should arrange data in memory like this: + * + * struct wil_memio io; + * struct ifreq ifr = { + * .ifr_data = &io, + * }; + */ +#define WIL_IOCTL_MEMIO (SIOCDEVPRIVATE + 2) + +/** + * Perform block I/O operation to the card memory + * + * User code should arrange data in memory like this: + * + * void *buf; + * struct wil_memio_block io = { + * .block = buf, + * }; + * struct ifreq ifr = { + * .ifr_data = &io, + * }; + */ +#define WIL_IOCTL_MEMIO_BLOCK (SIOCDEVPRIVATE + 3) + +/** + * operation to perform + * + * @wil_mmio_op_mask - bits defining operation, + * @wil_mmio_addr_mask - bits defining addressing mode + */ +enum wil_memio_op { + wil_mmio_read = 0, + wil_mmio_write = 1, + wil_mmio_op_mask = 0xff, + wil_mmio_addr_linker = 0 << 8, + wil_mmio_addr_ahb = 1 << 8, + wil_mmio_addr_bar = 2 << 8, + wil_mmio_addr_mask = 0xff00, +}; + +struct wil_memio { + uint32_t op; /* enum wil_memio_op */ + uint32_t addr; /* should be 32-bit aligned */ + uint32_t val; +}; + +struct wil_memio_block { + uint32_t op; /* enum wil_memio_op */ + uint32_t addr; /* should be 32-bit aligned */ + uint32_t size; /* should be multiple of 4 */ + void __user *block; /* block address */ +}; + +#endif /* __WIL6210_UAPI_H__ */ -- 2.39.5