From ddc713878f445b68626d10aa190139908426eb91 Mon Sep 17 00:00:00 2001 From: Chaotian Jing Date: Thu, 30 Jun 2016 10:01:00 +0800 Subject: [PATCH] mmc: mediatek: fix CMD21/CMD19 timeout issue we did not deal with the read data of CMD21/CMD19 if there is response CRC error of CMD21/CMD19, in this case, eMMC/SD may still in send-data state. therefore, all of next commands cannot get response as device is not in transfer state. for resolving this issue, still need deal with the data receive to make device back to transfer state. Signed-off-by: Chaotian Jing Signed-off-by: Ulf Hansson --- drivers/mmc/host/mtk-sd.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 4b175a634e36..91277b99f035 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -801,7 +801,13 @@ static bool msdc_cmd_done(struct msdc_host *host, int events, } if (!sbc_error && !(events & MSDC_INT_CMDRDY)) { - msdc_reset_hw(host); + if (cmd->opcode != MMC_SEND_TUNING_BLOCK && + cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) + /* + * should not clear fifo/interrupt as the tune data + * may have alreay come. + */ + msdc_reset_hw(host); if (events & MSDC_INT_RSPCRCERR) { cmd->error = -EILSEQ; host->error |= REQ_CMD_EIO; @@ -885,7 +891,11 @@ static void msdc_start_command(struct msdc_host *host, static void msdc_cmd_next(struct msdc_host *host, struct mmc_request *mrq, struct mmc_command *cmd) { - if (cmd->error || (mrq->sbc && mrq->sbc->error)) + if ((cmd->error && + !(cmd->error == -EILSEQ && + (cmd->opcode == MMC_SEND_TUNING_BLOCK || + cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))) || + (mrq->sbc && mrq->sbc->error)) msdc_request_done(host, mrq); else if (cmd == mrq->sbc) msdc_start_command(host, mrq, mrq->cmd); -- 2.39.5