From df96ed8dced21426c54c7f69cf7513e75280957a Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 22 Sep 2014 16:45:39 +0800 Subject: [PATCH] usb: chipidea: introduce ITC tuning interface ITC (Interrupt Threshold Control) is used to set the maximum rate at which the host/device controller will issue interrupts. The default value is 8 (1ms) for it. EHCI core will modify it to 1, but device mode keeps it as default value. In some use cases like Android ADB, it only has one usb request for each direction, and maximum payload data is only 4KB, so the speed is 4MB/s at most, it needs controller to trigger interrupt as fast as possible to increase the speed. The USB performance will be better if the interrupt can be triggered faster. Reduce ITC value is benefit for USB performance, but the interrupt number is increased at the same time, it may increase cpu utilization too. Most of use case cares about performance, but some may care about cpu utilization, so, we leave a platform interface for user. We set ITC as 1 (1 micro-frame) as default value which is aligned with ehci core default value. Signed-off-by: Peter Chen --- drivers/usb/chipidea/core.c | 16 ++++++++++++++++ include/linux/usb/chipidea.h | 2 ++ 2 files changed, 18 insertions(+) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 1b1dd80897f7..845d0d7d28e6 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -425,6 +425,9 @@ void ci_platform_configure(struct ci_hdrc *ci) if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA) hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA); + + hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16); + } /** @@ -576,6 +579,8 @@ static irqreturn_t ci_irq(int irq, void *data) static int ci_get_platdata(struct device *dev, struct ci_hdrc_platform_data *platdata) { + int ret; + if (!platdata->phy_mode) platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); @@ -607,6 +612,17 @@ static int ci_get_platdata(struct device *dev, if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) platdata->flags |= CI_HDRC_FORCE_FULLSPEED; + platdata->itc_setting = 1; + if (of_find_property(dev->of_node, "itc-setting", NULL)) { + ret = of_property_read_u32(dev->of_node, "itc-setting", + &platdata->itc_setting); + if (ret) { + dev_err(dev, + "failed to get itc-setting\n"); + return ret; + } + } + return 0; } diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d1e1285a971d..1c5d7763990a 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -36,6 +36,8 @@ struct ci_hdrc_platform_data { void (*notify_event) (struct ci_hdrc *ci, unsigned event); struct regulator *reg_vbus; bool tpl_support; + /* interrupt threshold setting */ + u32 itc_setting; }; /* Default offset of capability registers */ -- 2.39.5