From e249fc7d9b1cfa046bc448b27c3fde5619442a7a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Sep 2015 22:30:51 +0200 Subject: [PATCH] ARM: dts: nomadik: add accelerometer IRQ and pin setting The LIS3LV02DL accelerometer on the Nomadik NHK15 can generate IRQs by the DRDY line. Map this in the DTS file and set up the pin as input to the SoC. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-nhk15.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 4a21c6492dbb..d35aa88791ad 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -57,8 +57,15 @@ }; }; }; + lis3lv02dl { + lis3lv02dl_nhk_mode: lis3lv02dl_nhk { + nhk_cfg1 { + pins = "GPIO82_C10"; // IRQ line + ste,input = <0>; + }; + }; + }; }; - src@101e0000 { /* These chrystal outputs are not used on this board */ disable-sxtalo; @@ -86,6 +93,10 @@ lis3lv02dl@1d { /* Accelerometer */ compatible = "st,lis3lv02dl-accel"; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; // GPIO 82 + pinctrl-0 = <&lis3lv02dl_nhk_mode>; + pinctrl-names = "default"; reg = <0x1d>; }; stmpe0: stmpe2401@43 { -- 2.39.5