From e4a1d8467d9ecd793b10d7a49ae32a9f50886aec Mon Sep 17 00:00:00 2001 From: Chon Ming Lee Date: Wed, 9 Apr 2014 13:28:20 +0300 Subject: [PATCH] drm/i915/chv: Add phy supports for Cherryview MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee Reviewed-by: Ville Syrjälä [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 188 +++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++- 2 files changed, 270 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 12a100389e2c..a7924d968282 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1968,6 +1968,50 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) mutex_unlock(&dev_priv->dpio_lock); } +static void chv_pre_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct edp_power_seq power_seq; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + int data, i; + + /* Program Tx lane latency optimal setting*/ + mutex_lock(&dev_priv->dpio_lock); + for (i = 0; i < 4; i++) { + /* Set the latency optimal bit */ + data = (i == 1) ? 0x0 : 0x6; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW11(ch, i), + data << DPIO_FRC_LATENCY_SHFIT); + + /* Set the upar bit */ + data = (i == 1) ? 0x0 : 0x1; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), + data << DPIO_UPAR_SHIFT); + } + + /* Data lane stagger programming */ + /* FIXME: Fix up value only after power analysis */ + + mutex_unlock(&dev_priv->dpio_lock); + + if (is_edp(intel_dp)) { + /* init power sequencer on this pipe and port */ + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + } + + intel_enable_dp(encoder); + + vlv_wait_port_ready(dev_priv, dport); +} + /* * Native read with retry for link status and receiver capability reads for * cases where the sink may still be asleep. @@ -2192,6 +2236,142 @@ static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp) return 0; } +static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc); + u32 deemph_reg_value, margin_reg_value, val, tx_dw2; + uint8_t train_set = intel_dp->train_set[0]; + enum dpio_channel ch = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 128; + margin_reg_value = 52; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 128; + margin_reg_value = 77; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + deemph_reg_value = 128; + margin_reg_value = 102; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + deemph_reg_value = 128; + margin_reg_value = 154; + /* FIXME extra to set for 1200 */ + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 85; + margin_reg_value = 78; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 85; + margin_reg_value = 116; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + deemph_reg_value = 85; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_6: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 64; + margin_reg_value = 104; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 64; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 43; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + default: + return 0; + } + + mutex_lock(&dev_priv->dpio_lock); + + /* Clear calc init */ + vlv_dpio_write(dev_priv, pipe, CHV_PCS_DW10(ch), 0); + + /* Program swing deemph */ + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW4(ch)); + val &= ~DPIO_SWING_DEEMPH9P5_MASK; + val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(ch), val); + + /* Program swing margin */ + tx_dw2 = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW2(ch)); + tx_dw2 &= ~DPIO_SWING_MARGIN_MASK; + tx_dw2 |= margin_reg_value << DPIO_SWING_MARGIN_SHIFT; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(ch), tx_dw2); + + /* Disable unique transition scale */ + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW3(ch)); + val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(ch), val); + + if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK) + == DP_TRAIN_PRE_EMPHASIS_0) && + ((train_set & DP_TRAIN_VOLTAGE_SWING_MASK) + == DP_TRAIN_VOLTAGE_SWING_1200)) { + + /* + * The document said it needs to set bit 27 for ch0 and bit 26 + * for ch1. Might be a typo in the doc. + * For now, for this unique transition scale selection, set bit + * 27 for ch0 and ch1. + */ + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW3(ch)); + val |= DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(ch), val); + + tx_dw2 |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(ch), tx_dw2); + } + + /* Start swing calculation */ + vlv_dpio_write(dev_priv, pipe, CHV_PCS_DW10(ch), + (DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3)); + + /* LRC Bypass */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); + val |= DPIO_LRC_BYPASS; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val); + + mutex_unlock(&dev_priv->dpio_lock); + + return 0; +} + static void intel_get_adjust_train(struct intel_dp *intel_dp, const uint8_t link_status[DP_LINK_STATUS_SIZE]) @@ -2406,6 +2586,9 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) } else if (IS_HASWELL(dev)) { signal_levels = intel_hsw_signal_levels(train_set); mask = DDI_BUF_EMP_MASK; + } else if (IS_CHERRYVIEW(dev)) { + signal_levels = intel_chv_signal_levels(intel_dp); + mask = 0; } else if (IS_VALLEYVIEW(dev)) { signal_levels = intel_vlv_signal_levels(intel_dp); mask = 0; @@ -4037,7 +4220,10 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->disable = intel_disable_dp; intel_encoder->get_hw_state = intel_dp_get_hw_state; intel_encoder->get_config = intel_dp_get_config; - if (IS_VALLEYVIEW(dev)) { + if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_enable = chv_pre_enable_dp; + intel_encoder->enable = vlv_enable_dp; + } else if (IS_VALLEYVIEW(dev)) { intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; intel_encoder->pre_enable = vlv_pre_enable_dp; intel_encoder->enable = vlv_enable_dp; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index b606162cc17c..586cee04cc06 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1224,6 +1224,85 @@ static void vlv_hdmi_post_disable(struct intel_encoder *encoder) mutex_unlock(&dev_priv->dpio_lock); } +static void chv_hdmi_pre_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + int data, i; + u32 val; + + /* Program Tx latency optimal setting */ + mutex_lock(&dev_priv->dpio_lock); + for (i = 0; i < 4; i++) { + /* Set the latency optimal bit */ + data = (i == 1) ? 0x0 : 0x6; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW11(ch, i), + data << DPIO_FRC_LATENCY_SHFIT); + + /* Set the upar bit */ + data = (i == 1) ? 0x0 : 0x1; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), + data << DPIO_UPAR_SHIFT); + } + + /* Data lane stagger programming */ + /* FIXME: Fix up value only after power analysis */ + + /* Clear calc init */ + vlv_dpio_write(dev_priv, pipe, CHV_PCS_DW10(ch), 0); + + /* FIXME: Program the support xxx V-dB */ + /* Use 800mV-0dB */ + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW4(ch)); + val &= ~DPIO_SWING_DEEMPH9P5_MASK; + val |= 128 << DPIO_SWING_DEEMPH9P5_SHIFT; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW2(ch)); + val &= ~DPIO_SWING_MARGIN_MASK; + val |= 102 << DPIO_SWING_MARGIN_SHIFT; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(ch), val); + + /* Disable unique transition scale */ + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW3(ch)); + val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(ch), val); + + /* Additional steps for 1200mV-0dB */ +#if 0 + val = vlv_dpio_read(dev_priv, pipe, VLV_TX_DW3(ch)); + if (ch) + val |= DPIO_TX_UNIQ_TRANS_SCALE_CH1; + else + val |= DPIO_TX_UNIQ_TRANS_SCALE_CH0; + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(ch), val); + + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(ch), + vlv_dpio_read(dev_priv, pipe, VLV_TX_DW2(ch)) | + (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT)); +#endif + /* Start swing calculation */ + vlv_dpio_write(dev_priv, pipe, CHV_PCS_DW10(ch), + DPIO_PCS_SWING_CALC_TX0_TX2 | + DPIO_PCS_SWING_CALC_TX1_TX3); + + /* LRC Bypass */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); + val |= DPIO_LRC_BYPASS; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val); + + mutex_unlock(&dev_priv->dpio_lock); + + intel_enable_hdmi(encoder); + + vlv_wait_port_ready(dev_priv, dport); +} + static void intel_hdmi_destroy(struct drm_connector *connector) { drm_connector_cleanup(connector); @@ -1358,7 +1437,10 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port) intel_encoder->disable = intel_disable_hdmi; intel_encoder->get_hw_state = intel_hdmi_get_hw_state; intel_encoder->get_config = intel_hdmi_get_config; - if (IS_VALLEYVIEW(dev)) { + if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_enable = chv_hdmi_pre_enable; + intel_encoder->enable = vlv_enable_hdmi; + } else if (IS_VALLEYVIEW(dev)) { intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable; intel_encoder->pre_enable = vlv_hdmi_pre_enable; intel_encoder->enable = vlv_enable_hdmi; -- 2.39.5