From e4f4e8bfa47431b91fbb21dd9b86d9bc2c15cbd7 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 30 Nov 2012 14:40:51 +0100 Subject: [PATCH] ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030 The pin in question is muxed between GPIO7 and PWM1. For backlight control there is a custom code in board-zoom-display to control the backlight. No need to request the GPIO7 - which was failing since the way it is requested no longer valid: twl's gpio range is allocated dynamically. Signed-off-by: Peter Ujfalusi --- arch/arm/mach-omap2/board-zoom-peripherals.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f4ea92649672..0745bd93f398 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -38,8 +38,6 @@ #define OMAP_ZOOM_TSC2004_IRQ_GPIO (153) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) -#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) - /* Zoom2 has Qwerty keyboard*/ static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), @@ -243,23 +241,15 @@ static struct omap_tw4030_pdata omap_twl4030_audio_data = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); - ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, - "lcd enable"); - if (ret) - pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", - LCD_PANEL_ENABLE_GPIO); - /* Audio setup */ omap_twl4030_audio_data.jack_detect = gpio + 2; omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data); - return ret; + return 0; } static struct twl4030_gpio_platform_data zoom_gpio_data = { -- 2.39.5