From e53f21c761d141bbcbce06e9ddab3b4e0a828f2c Mon Sep 17 00:00:00 2001 From: Zdenko Pulitika Date: Wed, 26 Aug 2015 17:11:38 +0100 Subject: [PATCH] clk: pistachio: Fix override of clk-pll settings from boot loader PLL enable callbacks are overriding PLL mode (int/frac) and Noise reduction (on/off) settings set by the boot loader which results in the incorrect clock rate. PLL mode and noise reduction are defined by the DSMPD and DACPD bits of the PLL control register. PLL .enable() callbacks enable PLL by deasserting all power-down bits of the PLL control register, including DSMPD and DACPD bits, which is not necessary since these bits don't actually enable/disable PLL. This commit fixes the problem by removing DSMPD and DACPD bits from the "PLL enable" mask. Fixes: 43049b0c83f17("CLK: Pistachio: Add PLL driver") Cc: # 4.1 Reviewed-by: Andrew Bresitcker Signed-off-by: Zdenko Pulitika Signed-off-by: Govindraj Raja Signed-off-by: Stephen Boyd --- drivers/clk/pistachio/clk-pll.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/clk/pistachio/clk-pll.c b/drivers/clk/pistachio/clk-pll.c index f71bfcc0d367..9ae59ed0156b 100644 --- a/drivers/clk/pistachio/clk-pll.c +++ b/drivers/clk/pistachio/clk-pll.c @@ -134,8 +134,7 @@ static int pll_gf40lp_frac_enable(struct clk_hw *hw) u32 val; val = pll_readl(pll, PLL_CTRL3); - val &= ~(PLL_FRAC_CTRL3_PD | PLL_FRAC_CTRL3_DACPD | - PLL_FRAC_CTRL3_DSMPD | PLL_FRAC_CTRL3_FOUTPOSTDIVPD | + val &= ~(PLL_FRAC_CTRL3_PD | PLL_FRAC_CTRL3_FOUTPOSTDIVPD | PLL_FRAC_CTRL3_FOUT4PHASEPD | PLL_FRAC_CTRL3_FOUTVCOPD); pll_writel(pll, val, PLL_CTRL3); @@ -277,7 +276,7 @@ static int pll_gf40lp_laint_enable(struct clk_hw *hw) u32 val; val = pll_readl(pll, PLL_CTRL1); - val &= ~(PLL_INT_CTRL1_PD | PLL_INT_CTRL1_DSMPD | + val &= ~(PLL_INT_CTRL1_PD | PLL_INT_CTRL1_FOUTPOSTDIVPD | PLL_INT_CTRL1_FOUTVCOPD); pll_writel(pll, val, PLL_CTRL1); -- 2.39.5