From e6e4ec2f98ae3b75cfede011c8794120914e789f Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Mon, 19 Jul 2010 04:37:11 +0000 Subject: [PATCH] net: Removing dead ARCH_PNX010X ARCH_PNX010X doesn't exist in Kconfig, therefore removing all references for it from the source code/Kconfig. Signed-off-by: Christoph Egger Signed-off-by: David S. Miller --- drivers/net/Kconfig | 4 ++-- drivers/net/cs89x0.c | 45 -------------------------------------------- 2 files changed, 2 insertions(+), 47 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 88294762f9e6..8c13df7fdc16 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1464,7 +1464,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS) + || ARCH_IXDP2X01 || MACH_MX31ADS) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1478,7 +1478,7 @@ config CS89x0 config CS89x0_NONISA_IRQ def_bool y depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS config TC35815 tristate "TOSHIBA TC35815 Ethernet support" diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 89f2ef7f16de..d325e01a53e0 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -176,12 +176,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_IXDP2X01) static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; -#elif defined(CONFIG_ARCH_PNX010X) -#include -#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ -#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ -static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0}; -static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; #elif defined(CONFIG_MACH_MX31ADS) #include static unsigned int netcard_portlist[] __used __initdata = { @@ -367,18 +361,6 @@ writeword(unsigned long base_addr, int portno, u16 value) { __raw_writel(value, base_addr + (portno << 1)); } -#elif defined(CONFIG_ARCH_PNX010X) -static u16 -readword(unsigned long base_addr, int portno) -{ - return inw(base_addr + (portno << 1)); -} - -static void -writeword(unsigned long base_addr, int portno, u16 value) -{ - outw(value, base_addr + (portno << 1)); -} #else static u16 readword(unsigned long base_addr, int portno) @@ -541,30 +523,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) #endif } -#ifdef CONFIG_ARCH_PNX010X - initialize_ebi(); - - /* Map GPIO registers for the pins connected to the CS8900a. */ - if (map_cirrus_gpio() < 0) - return -ENODEV; - - reset_cirrus(); - - /* Map event-router registers. */ - if (map_event_router() < 0) - return -ENODEV; - - enable_cirrus_irq(); - - unmap_cirrus_gpio(); - unmap_event_router(); - - dev->base_addr = ioaddr; - - for (i = 0 ; i < 3 ; i++) - readreg(dev, 0); -#endif - /* Grab the region so we can find another board if autoIRQ fails. */ /* WTF is going on here? */ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { @@ -1343,9 +1301,6 @@ net_open(struct net_device *dev) case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break; default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2); } -#ifdef CONFIG_ARCH_PNX010X - result = A_CNF_10B_T; -#endif if (!result) { printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); release_dma: -- 2.39.5