From e7f3d22289e4307b3071cc18b1d8ecc6598c0be4 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 10 Jan 2014 14:51:42 +0100 Subject: [PATCH] mmc: mmci: Handle CMD irq before DATA irq In case of a read operation both MCI_CMDRESPEND and MCI_DATAEND can be set in the status register when entering the interrupt handler. This is due to that the card start sending data before the host has acknowledged the command response. To resolve the issue for this scenario, we must start by handling the CMD irq instead of the DATA irq. The reason is beacuse the completion of the DATA irq will not respect the current command and then causing it to be garbled. Cc: Russell King Cc: Johan Rudholm Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index b93122636531..8324e3ec21c2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1144,16 +1144,17 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); + cmd = host->cmd; + if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT| + MCI_CMDRESPEND) && cmd) + mmci_cmd_irq(host, cmd, status); + data = host->data; if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND| MCI_DATABLOCKEND) && data) mmci_data_irq(host, data, status); - cmd = host->cmd; - if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd) - mmci_cmd_irq(host, cmd, status); - ret = 1; } while (status); -- 2.39.2