From e9ac890a9309a75193a8f07c1de3b1d702353f28 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 21 Aug 2013 10:27:02 -0300 Subject: [PATCH] ARM: dts: imx6qdl-wandboard: Add usbotg support Tested via g_ether: $ modprobe g_ether using random self ethernet address using random host ethernet address usb0: HOST MAC 42:b5:26:a9:48:21 usb0: MAC 36:a6:85:9b:9e:13 using random self ethernet address using random host ethernet address g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready $ g_ether gadget: high-speed config #1: CDC Ethernet (ECM) $ ifconfig usb0 10.0.0.2 Then on the PC host side: ~$ sudo ifconfig usb0 10.0.0.1 ~$ ping 10.0.0.2 PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_req=1 ttl=64 time=1.26 ms 64 bytes from 10.0.0.2: icmp_req=2 ttl=64 time=0.280 ms 64 bytes from 10.0.0.2: icmp_req=3 ttl=64 time=0.297 ms Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index a55113e65bcb..b46208016b8d 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -115,6 +115,14 @@ status = "okay"; }; +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + dr_mode = "peripheral"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_2>; -- 2.39.5