From eeb90cb28718d80fb55993f690f8e1aa21b90f06 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 29 Jul 2013 20:07:53 +0300 Subject: [PATCH] staging: octeon-usb: cvmx-usb: fix whitespace issues Fix most of the whitespace issues reported by checkpatch: - use tabs for indentation - brace placement vs. newlines - (foo_t*) -> (foo_t *) - i=0 -> i = 0 Signed-off-by: Aaro Koskinen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon-usb/cvmx-usb.c | 4326 ++++++++++++------------- 1 file changed, 2144 insertions(+), 2182 deletions(-) diff --git a/drivers/staging/octeon-usb/cvmx-usb.c b/drivers/staging/octeon-usb/cvmx-usb.c index 976ba1970b90..e8fad48b1bb5 100644 --- a/drivers/staging/octeon-usb/cvmx-usb.c +++ b/drivers/staging/octeon-usb/cvmx-usb.c @@ -68,24 +68,24 @@ #define CVMX_PREFETCH_PREF0(address, offset) CVMX_PREFETCH_PREFX(0, address, offset) #define CVMX_CLZ(result, input) asm ("clz %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input)) -#define MAX_RETRIES 3 /* Maximum number of times to retry failed transactions */ -#define MAX_PIPES 32 /* Maximum number of pipes that can be open at once */ -#define MAX_TRANSACTIONS 256 /* Maximum number of outstanding transactions across all pipes */ -#define MAX_CHANNELS 8 /* Maximum number of hardware channels supported by the USB block */ -#define MAX_USB_ADDRESS 127 /* The highest valid USB device address */ -#define MAX_USB_ENDPOINT 15 /* The highest valid USB endpoint number */ -#define MAX_USB_HUB_PORT 15 /* The highest valid port number on a hub */ -#define MAX_TRANSFER_BYTES ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */ -#define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */ +#define MAX_RETRIES 3 /* Maximum number of times to retry failed transactions */ +#define MAX_PIPES 32 /* Maximum number of pipes that can be open at once */ +#define MAX_TRANSACTIONS 256 /* Maximum number of outstanding transactions across all pipes */ +#define MAX_CHANNELS 8 /* Maximum number of hardware channels supported by the USB block */ +#define MAX_USB_ADDRESS 127 /* The highest valid USB device address */ +#define MAX_USB_ENDPOINT 15 /* The highest valid USB endpoint number */ +#define MAX_USB_HUB_PORT 15 /* The highest valid port number on a hub */ +#define MAX_TRANSFER_BYTES ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */ +#define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */ /* These defines disable the normal read and write csr. This is so I can add - extra debug stuff to the usb specific version and I won't use the normal - version by mistake */ + extra debug stuff to the usb specific version and I won't use the normal + version by mistake */ #define cvmx_read_csr use_cvmx_usb_read_csr64_instead_of_cvmx_read_csr #define cvmx_write_csr use_cvmx_usb_write_csr64_instead_of_cvmx_write_csr typedef enum { - __CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16, + __CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16, } cvmx_usb_transaction_flags_t; enum { @@ -104,14 +104,14 @@ enum { * transaction with a simple clearing of bit 0. */ typedef enum { - CVMX_USB_STAGE_NON_CONTROL, - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE, - CVMX_USB_STAGE_SETUP, - CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE, - CVMX_USB_STAGE_DATA, - CVMX_USB_STAGE_DATA_SPLIT_COMPLETE, - CVMX_USB_STAGE_STATUS, - CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE, + CVMX_USB_STAGE_NON_CONTROL, + CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE, + CVMX_USB_STAGE_SETUP, + CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE, + CVMX_USB_STAGE_DATA, + CVMX_USB_STAGE_DATA_SPLIT_COMPLETE, + CVMX_USB_STAGE_STATUS, + CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE, } cvmx_usb_stage_t; /** @@ -120,23 +120,23 @@ typedef enum { * of pending requests for a pipe. */ typedef struct cvmx_usb_transaction { - struct cvmx_usb_transaction *prev; /**< Transaction before this one in the pipe */ - struct cvmx_usb_transaction *next; /**< Transaction after this one in the pipe */ - cvmx_usb_transfer_t type; /**< Type of transaction, duplicated of the pipe */ - cvmx_usb_transaction_flags_t flags; /**< State flags for this transaction */ - uint64_t buffer; /**< User's physical buffer address to read/write */ - int buffer_length; /**< Size of the user's buffer in bytes */ - uint64_t control_header; /**< For control transactions, physical address of the 8 byte standard header */ - int iso_start_frame; /**< For ISO transactions, the starting frame number */ - int iso_number_packets; /**< For ISO transactions, the number of packets in the request */ - cvmx_usb_iso_packet_t *iso_packets; /**< For ISO transactions, the sub packets in the request */ - int xfersize; - int pktcnt; - int retries; - int actual_bytes; /**< Actual bytes transfer for this transaction */ - cvmx_usb_stage_t stage; /**< For control transactions, the current stage */ - cvmx_usb_callback_func_t callback; /**< User's callback function when complete */ - void *callback_data; /**< User's data */ + struct cvmx_usb_transaction *prev; /**< Transaction before this one in the pipe */ + struct cvmx_usb_transaction *next; /**< Transaction after this one in the pipe */ + cvmx_usb_transfer_t type; /**< Type of transaction, duplicated of the pipe */ + cvmx_usb_transaction_flags_t flags; /**< State flags for this transaction */ + uint64_t buffer; /**< User's physical buffer address to read/write */ + int buffer_length; /**< Size of the user's buffer in bytes */ + uint64_t control_header; /**< For control transactions, physical address of the 8 byte standard header */ + int iso_start_frame; /**< For ISO transactions, the starting frame number */ + int iso_number_packets; /**< For ISO transactions, the number of packets in the request */ + cvmx_usb_iso_packet_t *iso_packets; /**< For ISO transactions, the sub packets in the request */ + int xfersize; + int pktcnt; + int retries; + int actual_bytes; /**< Actual bytes transfer for this transaction */ + cvmx_usb_stage_t stage; /**< For control transactions, the current stage */ + cvmx_usb_callback_func_t callback; /**< User's callback function when complete */ + void *callback_data; /**< User's data */ } cvmx_usb_transaction_t; /** @@ -144,99 +144,98 @@ typedef struct cvmx_usb_transaction { * USB device. It contains a list of pending request to the device. */ typedef struct cvmx_usb_pipe { - struct cvmx_usb_pipe *prev; /**< Pipe before this one in the list */ - struct cvmx_usb_pipe *next; /**< Pipe after this one in the list */ - cvmx_usb_transaction_t *head; /**< The first pending transaction */ - cvmx_usb_transaction_t *tail; /**< The last pending transaction */ - uint64_t interval; /**< For periodic pipes, the interval between packets in frames */ - uint64_t next_tx_frame; /**< The next frame this pipe is allowed to transmit on */ - cvmx_usb_pipe_flags_t flags; /**< State flags for this pipe */ - cvmx_usb_speed_t device_speed; /**< Speed of device connected to this pipe */ - cvmx_usb_transfer_t transfer_type; /**< Type of transaction supported by this pipe */ - cvmx_usb_direction_t transfer_dir; /**< IN or OUT. Ignored for Control */ - int multi_count; /**< Max packet in a row for the device */ - uint16_t max_packet; /**< The device's maximum packet size in bytes */ - uint8_t device_addr; /**< USB device address at other end of pipe */ - uint8_t endpoint_num; /**< USB endpoint number at other end of pipe */ - uint8_t hub_device_addr; /**< Hub address this device is connected to */ - uint8_t hub_port; /**< Hub port this device is connected to */ - uint8_t pid_toggle; /**< This toggles between 0/1 on every packet send to track the data pid needed */ - uint8_t channel; /**< Hardware DMA channel for this pipe */ - int8_t split_sc_frame; /**< The low order bits of the frame number the split complete should be sent on */ + struct cvmx_usb_pipe *prev; /**< Pipe before this one in the list */ + struct cvmx_usb_pipe *next; /**< Pipe after this one in the list */ + cvmx_usb_transaction_t *head; /**< The first pending transaction */ + cvmx_usb_transaction_t *tail; /**< The last pending transaction */ + uint64_t interval; /**< For periodic pipes, the interval between packets in frames */ + uint64_t next_tx_frame; /**< The next frame this pipe is allowed to transmit on */ + cvmx_usb_pipe_flags_t flags; /**< State flags for this pipe */ + cvmx_usb_speed_t device_speed; /**< Speed of device connected to this pipe */ + cvmx_usb_transfer_t transfer_type; /**< Type of transaction supported by this pipe */ + cvmx_usb_direction_t transfer_dir; /**< IN or OUT. Ignored for Control */ + int multi_count; /**< Max packet in a row for the device */ + uint16_t max_packet; /**< The device's maximum packet size in bytes */ + uint8_t device_addr; /**< USB device address at other end of pipe */ + uint8_t endpoint_num; /**< USB endpoint number at other end of pipe */ + uint8_t hub_device_addr; /**< Hub address this device is connected to */ + uint8_t hub_port; /**< Hub port this device is connected to */ + uint8_t pid_toggle; /**< This toggles between 0/1 on every packet send to track the data pid needed */ + uint8_t channel; /**< Hardware DMA channel for this pipe */ + int8_t split_sc_frame; /**< The low order bits of the frame number the split complete should be sent on */ } cvmx_usb_pipe_t; typedef struct { - cvmx_usb_pipe_t *head; /**< Head of the list, or NULL if empty */ - cvmx_usb_pipe_t *tail; /**< Tail if the list, or NULL if empty */ + cvmx_usb_pipe_t *head; /**< Head of the list, or NULL if empty */ + cvmx_usb_pipe_t *tail; /**< Tail if the list, or NULL if empty */ } cvmx_usb_pipe_list_t; typedef struct { - struct { - int channel; - int size; - uint64_t address; - } entry[MAX_CHANNELS+1]; - int head; - int tail; + struct { + int channel; + int size; + uint64_t address; + } entry[MAX_CHANNELS+1]; + int head; + int tail; } cvmx_usb_tx_fifo_t; /** * The state of the USB block is stored in this structure */ typedef struct { - int init_flags; /**< Flags passed to initialize */ - int index; /**< Which USB block this is for */ - int idle_hardware_channels; /**< Bit set for every idle hardware channel */ - cvmx_usbcx_hprt_t usbcx_hprt; /**< Stored port status so we don't need to read a CSR to determine splits */ - cvmx_usb_pipe_t *pipe_for_channel[MAX_CHANNELS]; /**< Map channels to pipes */ - cvmx_usb_transaction_t *free_transaction_head; /**< List of free transactions head */ - cvmx_usb_transaction_t *free_transaction_tail; /**< List of free transactions tail */ - cvmx_usb_pipe_t pipe[MAX_PIPES]; /**< Storage for pipes */ - cvmx_usb_transaction_t transaction[MAX_TRANSACTIONS]; /**< Storage for transactions */ - cvmx_usb_callback_func_t callback[__CVMX_USB_CALLBACK_END]; /**< User global callbacks */ - void *callback_data[__CVMX_USB_CALLBACK_END]; /**< User data for each callback */ - int indent; /**< Used by debug output to indent functions */ - cvmx_usb_port_status_t port_status; /**< Last port status used for change notification */ - cvmx_usb_pipe_list_t free_pipes; /**< List of all pipes that are currently closed */ - cvmx_usb_pipe_list_t idle_pipes; /**< List of open pipes that have no transactions */ - cvmx_usb_pipe_list_t active_pipes[4]; /**< Active pipes indexed by transfer type */ - uint64_t frame_number; /**< Increments every SOF interrupt for time keeping */ - cvmx_usb_transaction_t *active_split; /**< Points to the current active split, or NULL */ - cvmx_usb_tx_fifo_t periodic; - cvmx_usb_tx_fifo_t nonperiodic; + int init_flags; /**< Flags passed to initialize */ + int index; /**< Which USB block this is for */ + int idle_hardware_channels; /**< Bit set for every idle hardware channel */ + cvmx_usbcx_hprt_t usbcx_hprt; /**< Stored port status so we don't need to read a CSR to determine splits */ + cvmx_usb_pipe_t *pipe_for_channel[MAX_CHANNELS]; /**< Map channels to pipes */ + cvmx_usb_transaction_t *free_transaction_head; /**< List of free transactions head */ + cvmx_usb_transaction_t *free_transaction_tail; /**< List of free transactions tail */ + cvmx_usb_pipe_t pipe[MAX_PIPES]; /**< Storage for pipes */ + cvmx_usb_transaction_t transaction[MAX_TRANSACTIONS]; /**< Storage for transactions */ + cvmx_usb_callback_func_t callback[__CVMX_USB_CALLBACK_END]; /**< User global callbacks */ + void *callback_data[__CVMX_USB_CALLBACK_END]; /**< User data for each callback */ + int indent; /**< Used by debug output to indent functions */ + cvmx_usb_port_status_t port_status; /**< Last port status used for change notification */ + cvmx_usb_pipe_list_t free_pipes; /**< List of all pipes that are currently closed */ + cvmx_usb_pipe_list_t idle_pipes; /**< List of open pipes that have no transactions */ + cvmx_usb_pipe_list_t active_pipes[4]; /**< Active pipes indexed by transfer type */ + uint64_t frame_number; /**< Increments every SOF interrupt for time keeping */ + cvmx_usb_transaction_t *active_split; /**< Points to the current active split, or NULL */ + cvmx_usb_tx_fifo_t periodic; + cvmx_usb_tx_fifo_t nonperiodic; } cvmx_usb_internal_state_t; /* This macro spins on a field waiting for it to reach a value */ #define CVMX_WAIT_FOR_FIELD32(address, type, field, op, value, timeout_usec)\ - ({int result; \ - do { \ - uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \ - octeon_get_clock_rate() / 1000000; \ - type c; \ - while (1) \ - { \ - c.u32 = __cvmx_usb_read_csr32(usb, address); \ - if (c.s.field op (value)) { \ - result = 0; \ - break; \ - } else if (cvmx_get_cycle() > done) { \ - result = -1; \ - break; \ - } else \ - cvmx_wait(100); \ - } \ - } while (0); \ - result;}) + ({int result; \ + do { \ + uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \ + octeon_get_clock_rate() / 1000000; \ + type c; \ + while (1) { \ + c.u32 = __cvmx_usb_read_csr32(usb, address); \ + if (c.s.field op (value)) { \ + result = 0; \ + break; \ + } else if (cvmx_get_cycle() > done) { \ + result = -1; \ + break; \ + } else \ + cvmx_wait(100); \ + } \ + } while (0); \ + result; }) /* This macro logically sets a single field in a CSR. It does the sequence - read, modify, and write */ -#define USB_SET_FIELD32(address, type, field, value)\ - do { \ - type c; \ - c.u32 = __cvmx_usb_read_csr32(usb, address);\ - c.s.field = value; \ - __cvmx_usb_write_csr32(usb, address, c.u32);\ - } while (0) + read, modify, and write */ +#define USB_SET_FIELD32(address, type, field, value) \ + do { \ + type c; \ + c.u32 = __cvmx_usb_read_csr32(usb, address); \ + c.s.field = value; \ + __cvmx_usb_write_csr32(usb, address, c.u32); \ + } while (0) /* Returns the IO address to push/pop stuff data from the FIFOs */ #define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000) @@ -266,10 +265,10 @@ static int octeon_usb_get_clock_type(void) * @return Result of the read */ static inline uint32_t __cvmx_usb_read_csr32(cvmx_usb_internal_state_t *usb, - uint64_t address) + uint64_t address) { - uint32_t result = cvmx_read64_uint32(address ^ 4); - return result; + uint32_t result = cvmx_read64_uint32(address ^ 4); + return result; } @@ -284,10 +283,10 @@ static inline uint32_t __cvmx_usb_read_csr32(cvmx_usb_internal_state_t *usb, * @param value Value to write */ static inline void __cvmx_usb_write_csr32(cvmx_usb_internal_state_t *usb, - uint64_t address, uint32_t value) + uint64_t address, uint32_t value) { - cvmx_write64_uint32(address ^ 4, value); - cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); + cvmx_write64_uint32(address ^ 4, value); + cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); } @@ -302,10 +301,10 @@ static inline void __cvmx_usb_write_csr32(cvmx_usb_internal_state_t *usb, * @return Result of the read */ static inline uint64_t __cvmx_usb_read_csr64(cvmx_usb_internal_state_t *usb, - uint64_t address) + uint64_t address) { - uint64_t result = cvmx_read64_uint64(address); - return result; + uint64_t result = cvmx_read64_uint64(address); + return result; } @@ -319,9 +318,9 @@ static inline uint64_t __cvmx_usb_read_csr64(cvmx_usb_internal_state_t *usb, * @param value Value to write */ static inline void __cvmx_usb_write_csr64(cvmx_usb_internal_state_t *usb, - uint64_t address, uint64_t value) + uint64_t address, uint64_t value) { - cvmx_write64_uint64(address, value); + cvmx_write64_uint64(address, value); } /** @@ -336,7 +335,7 @@ static inline void __cvmx_usb_write_csr64(cvmx_usb_internal_state_t *usb, */ static inline int __cvmx_usb_pipe_needs_split(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_t *pipe) { - return ((pipe->device_speed != CVMX_USB_SPEED_HIGH) && (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH)); + return ((pipe->device_speed != CVMX_USB_SPEED_HIGH) && (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH)); } @@ -350,10 +349,10 @@ static inline int __cvmx_usb_pipe_needs_split(cvmx_usb_internal_state_t *usb, cv */ static inline int __cvmx_usb_get_data_pid(cvmx_usb_pipe_t *pipe) { - if (pipe->pid_toggle) - return 2; /* Data1 */ - else - return 0; /* Data0 */ + if (pipe->pid_toggle) + return 2; /* Data1 */ + else + return 0; /* Data0 */ } @@ -369,22 +368,22 @@ static inline int __cvmx_usb_get_data_pid(cvmx_usb_pipe_t *pipe) */ int cvmx_usb_get_num_ports(void) { - int arch_ports = 0; - - if (OCTEON_IS_MODEL(OCTEON_CN56XX)) - arch_ports = 1; - else if (OCTEON_IS_MODEL(OCTEON_CN52XX)) - arch_ports = 2; - else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) - arch_ports = 1; - else if (OCTEON_IS_MODEL(OCTEON_CN31XX)) - arch_ports = 1; - else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) - arch_ports = 1; - else - arch_ports = 0; - - return arch_ports; + int arch_ports = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + arch_ports = 1; + else if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + arch_ports = 2; + else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) + arch_ports = 1; + else if (OCTEON_IS_MODEL(OCTEON_CN31XX)) + arch_ports = 1; + else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) + arch_ports = 1; + else + arch_ports = 0; + + return arch_ports; } @@ -392,25 +391,25 @@ int cvmx_usb_get_num_ports(void) * @INTERNAL * Allocate a usb transaction for use * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). * * @return Transaction or NULL */ static inline cvmx_usb_transaction_t *__cvmx_usb_alloc_transaction(cvmx_usb_internal_state_t *usb) { - cvmx_usb_transaction_t *t; - t = usb->free_transaction_head; - if (t) { - usb->free_transaction_head = t->next; - if (!usb->free_transaction_head) - usb->free_transaction_tail = NULL; - } - if (t) { - memset(t, 0, sizeof(*t)); - t->flags = __CVMX_USB_TRANSACTION_FLAGS_IN_USE; - } - return t; + cvmx_usb_transaction_t *t; + t = usb->free_transaction_head; + if (t) { + usb->free_transaction_head = t->next; + if (!usb->free_transaction_head) + usb->free_transaction_tail = NULL; + } + if (t) { + memset(t, 0, sizeof(*t)); + t->flags = __CVMX_USB_TRANSACTION_FLAGS_IN_USE; + } + return t; } @@ -418,22 +417,22 @@ static inline cvmx_usb_transaction_t *__cvmx_usb_alloc_transaction(cvmx_usb_inte * @INTERNAL * Free a usb transaction * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). * @param transaction - * Transaction to free + * Transaction to free */ static inline void __cvmx_usb_free_transaction(cvmx_usb_internal_state_t *usb, - cvmx_usb_transaction_t *transaction) + cvmx_usb_transaction_t *transaction) { - transaction->flags = 0; - transaction->prev = NULL; - transaction->next = NULL; - if (usb->free_transaction_tail) - usb->free_transaction_tail->next = transaction; - else - usb->free_transaction_head = transaction; - usb->free_transaction_tail = transaction; + transaction->flags = 0; + transaction->prev = NULL; + transaction->next = NULL; + if (usb->free_transaction_tail) + usb->free_transaction_tail->next = transaction; + else + usb->free_transaction_head = transaction; + usb->free_transaction_tail = transaction; } @@ -445,13 +444,13 @@ static inline void __cvmx_usb_free_transaction(cvmx_usb_internal_state_t *usb, */ static inline void __cvmx_usb_append_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe) { - pipe->next = NULL; - pipe->prev = list->tail; - if (list->tail) - list->tail->next = pipe; - else - list->head = pipe; - list->tail = pipe; + pipe->next = NULL; + pipe->prev = list->tail; + if (list->tail) + list->tail->next = pipe; + else + list->head = pipe; + list->tail = pipe; } @@ -463,25 +462,23 @@ static inline void __cvmx_usb_append_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_p */ static inline void __cvmx_usb_remove_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe) { - if (list->head == pipe) { - list->head = pipe->next; - pipe->next = NULL; - if (list->head) - list->head->prev = NULL; - else - list->tail = NULL; - } - else if (list->tail == pipe) { - list->tail = pipe->prev; - list->tail->next = NULL; - pipe->prev = NULL; - } - else { - pipe->prev->next = pipe->next; - pipe->next->prev = pipe->prev; - pipe->prev = NULL; - pipe->next = NULL; - } + if (list->head == pipe) { + list->head = pipe->next; + pipe->next = NULL; + if (list->head) + list->head->prev = NULL; + else + list->tail = NULL; + } else if (list->tail == pipe) { + list->tail = pipe->prev; + list->tail->next = NULL; + pipe->prev = NULL; + } else { + pipe->prev->next = pipe->next; + pipe->next->prev = pipe->prev; + pipe->prev = NULL; + pipe->next = NULL; + } } @@ -491,293 +488,290 @@ static inline void __cvmx_usb_remove_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_p * off in the disabled state. * * @param state Pointer to an empty cvmx_usb_state_t structure - * that will be populated by the initialize call. - * This structure is then passed to all other USB - * functions. + * that will be populated by the initialize call. + * This structure is then passed to all other USB + * functions. * @param usb_port_number - * Which Octeon USB port to initialize. + * Which Octeon USB port to initialize. * @param flags Flags to control hardware initialization. See - * cvmx_usb_initialize_flags_t for the flag - * definitions. Some flags are mandatory. + * cvmx_usb_initialize_flags_t for the flag + * definitions. Some flags are mandatory. * * @return 0 or a negative error code. */ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, cvmx_usb_initialize_flags_t flags) { - cvmx_usbnx_clk_ctl_t usbn_clk_ctl; - cvmx_usbnx_usbp_ctl_status_t usbn_usbp_ctl_status; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - usb->init_flags = flags; - - /* Make sure that state is large enough to store the internal state */ - if (sizeof(*state) < sizeof(*usb)) - return -EINVAL; - /* At first allow 0-1 for the usb port number */ - if ((usb_port_number < 0) || (usb_port_number > 1)) - return -EINVAL; - /* For all chips except 52XX there is only one port */ - if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0)) - return -EINVAL; - /* Try to determine clock type automatically */ - if ((flags & (CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI | - CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)) == 0) { - if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) - flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI; /* Only 12 MHZ crystals are supported */ - else - flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND; - } - - if (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) { - /* Check for auto ref clock frequency */ - if (!(flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK)) - switch (octeon_usb_get_clock_type()) { - case USB_CLOCK_TYPE_REF_12: - flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ; - break; - case USB_CLOCK_TYPE_REF_24: - flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ; - break; - case USB_CLOCK_TYPE_REF_48: - flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ; - break; - default: - return -EINVAL; - break; - } - } - - memset(usb, 0, sizeof(usb)); - usb->init_flags = flags; - - /* Initialize the USB state structure */ - { - int i; - usb->index = usb_port_number; - - /* Initialize the transaction double linked list */ - usb->free_transaction_head = NULL; - usb->free_transaction_tail = NULL; - for (i=0; itransaction + i); - for (i=0; ifree_pipes, usb->pipe + i); - } - - /* Power On Reset and PHY Initialization */ - - /* 1. Wait for DCOK to assert (nothing to do) */ - /* 2a. Write USBN0/1_CLK_CTL[POR] = 1 and - USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 */ - usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index)); - usbn_clk_ctl.s.por = 1; - usbn_clk_ctl.s.hrst = 0; - usbn_clk_ctl.s.prst = 0; - usbn_clk_ctl.s.hclk_rst = 0; - usbn_clk_ctl.s.enable = 0; - /* 2b. Select the USB reference clock/crystal parameters by writing - appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) { - /* The USB port uses 12/24/48MHz 2.5V board clock - source at USB_XO. USB_XI should be tied to GND. - Most Octeon evaluation boards require this setting */ - if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { - usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */ - usbn_clk_ctl.cn31xx.p_xenbn = 0; - } - else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) - usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */ - else - usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */ - - switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) { - case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ: - usbn_clk_ctl.s.p_c_sel = 0; - break; - case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ: - usbn_clk_ctl.s.p_c_sel = 1; - break; - case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ: - usbn_clk_ctl.s.p_c_sel = 2; - break; - } - } - else { - /* The USB port uses a 12MHz crystal as clock source - at USB_XO and USB_XI */ - if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { - usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */ - usbn_clk_ctl.cn31xx.p_xenbn = 1; - } - else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) - usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */ - else - usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */ - - usbn_clk_ctl.s.p_c_sel = 0; - } - /* 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and - setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down such - that USB is as close as possible to 125Mhz */ - { - int divisor = (octeon_get_clock_rate()+125000000-1)/125000000; - if (divisor < 4) /* Lower than 4 doesn't seem to work properly */ - divisor = 4; - usbn_clk_ctl.s.divide = divisor; - usbn_clk_ctl.s.divide2 = 0; - } - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */ - usbn_clk_ctl.s.hclk_rst = 1; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - /* 2e. Wait 64 core-clock cycles for HCLK to stabilize */ - cvmx_wait(64); - /* 3. Program the power-on reset field in the USBN clock-control register: - USBN_CLK_CTL[POR] = 0 */ - usbn_clk_ctl.s.por = 0; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - /* 4. Wait 1 ms for PHY clock to start */ - mdelay(1); - /* 5. Program the Reset input from automatic test equipment field in the - USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */ - usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index)); - usbn_usbp_ctl_status.s.ate_reset = 1; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), - usbn_usbp_ctl_status.u64); - /* 6. Wait 10 cycles */ - cvmx_wait(10); - /* 7. Clear ATE_RESET field in the USBN clock-control register: - USBN_USBP_CTL_STATUS[ATE_RESET] = 0 */ - usbn_usbp_ctl_status.s.ate_reset = 0; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), - usbn_usbp_ctl_status.u64); - /* 8. Program the PHY reset field in the USBN clock-control register: - USBN_CLK_CTL[PRST] = 1 */ - usbn_clk_ctl.s.prst = 1; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - /* 9. Program the USBP control and status register to select host or - device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for - device */ - usbn_usbp_ctl_status.s.hst_mode = 0; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), - usbn_usbp_ctl_status.u64); - /* 10. Wait 1 us */ - udelay(1); - /* 11. Program the hreset_n field in the USBN clock-control register: - USBN_CLK_CTL[HRST] = 1 */ - usbn_clk_ctl.s.hrst = 1; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - /* 12. Proceed to USB core initialization */ - usbn_clk_ctl.s.enable = 1; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - udelay(1); - - /* USB Core Initialization */ - - /* 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to - determine USB core configuration parameters. */ - /* Nothing needed */ - /* 2. Program the following fields in the global AHB configuration - register (USBC_GAHBCFG) - DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode - Burst length, USBC_GAHBCFG[HBSTLEN] = 0 - Nonperiodic TxFIFO empty level (slave mode only), - USBC_GAHBCFG[NPTXFEMPLVL] - Periodic TxFIFO empty level (slave mode only), - USBC_GAHBCFG[PTXFEMPLVL] - Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */ - { - cvmx_usbcx_gahbcfg_t usbcx_gahbcfg; - /* Due to an errata, CN31XX doesn't support DMA */ - if (OCTEON_IS_MODEL(OCTEON_CN31XX)) - usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA; - usbcx_gahbcfg.u32 = 0; - usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA); - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - usb->idle_hardware_channels = 0x1; /* Only use one channel with non DMA */ - else if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) - usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */ - else - usb->idle_hardware_channels = 0xff; - usbcx_gahbcfg.s.hbstlen = 0; - usbcx_gahbcfg.s.nptxfemplvl = 1; - usbcx_gahbcfg.s.ptxfemplvl = 1; - usbcx_gahbcfg.s.glblintrmsk = 1; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index), - usbcx_gahbcfg.u32); - } - /* 3. Program the following fields in USBC_GUSBCFG register. - HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0 - ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0 - USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5 - PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */ - { - cvmx_usbcx_gusbcfg_t usbcx_gusbcfg; - usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index)); - usbcx_gusbcfg.s.toutcal = 0; - usbcx_gusbcfg.s.ddrsel = 0; - usbcx_gusbcfg.s.usbtrdtim = 0x5; - usbcx_gusbcfg.s.phylpwrclksel = 0; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index), - usbcx_gusbcfg.u32); - } - /* 4. The software must unmask the following bits in the USBC_GINTMSK - register. - OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1 - Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */ - { - cvmx_usbcx_gintmsk_t usbcx_gintmsk; - int channel; - - usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index)); - usbcx_gintmsk.s.otgintmsk = 1; - usbcx_gintmsk.s.modemismsk = 1; - usbcx_gintmsk.s.hchintmsk = 1; - usbcx_gintmsk.s.sofmsk = 0; - /* We need RX FIFO interrupts if we don't have DMA */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - usbcx_gintmsk.s.rxflvlmsk = 1; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index), - usbcx_gintmsk.u32); - - /* Disable all channel interrupts. We'll enable them per channel later */ - for (channel=0; channel<8; channel++) - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0); - } - - { - /* Host Port Initialization */ - - /* 1. Program the host-port interrupt-mask field to unmask, - USBC_GINTMSK[PRTINT] = 1 */ - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, - prtintmsk, 1); - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, - disconnintmsk, 1); - /* 2. Program the USBC_HCFG register to select full-speed host or - high-speed host. */ - { - cvmx_usbcx_hcfg_t usbcx_hcfg; - usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index)); - usbcx_hcfg.s.fslssupp = 0; - usbcx_hcfg.s.fslspclksel = 0; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32); - } - /* 3. Program the port power bit to drive VBUS on the USB, - USBC_HPRT[PRTPWR] = 1 */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtpwr, 1); - - /* Steps 4-15 from the manual are done later in the port enable */ - } - - return 0; + cvmx_usbnx_clk_ctl_t usbn_clk_ctl; + cvmx_usbnx_usbp_ctl_status_t usbn_usbp_ctl_status; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + usb->init_flags = flags; + + /* Make sure that state is large enough to store the internal state */ + if (sizeof(*state) < sizeof(*usb)) + return -EINVAL; + /* At first allow 0-1 for the usb port number */ + if ((usb_port_number < 0) || (usb_port_number > 1)) + return -EINVAL; + /* For all chips except 52XX there is only one port */ + if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0)) + return -EINVAL; + /* Try to determine clock type automatically */ + if ((flags & (CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI | + CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)) == 0) { + if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) + flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI; /* Only 12 MHZ crystals are supported */ + else + flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND; + } + + if (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) { + /* Check for auto ref clock frequency */ + if (!(flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK)) + switch (octeon_usb_get_clock_type()) { + case USB_CLOCK_TYPE_REF_12: + flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ; + break; + case USB_CLOCK_TYPE_REF_24: + flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ; + break; + case USB_CLOCK_TYPE_REF_48: + flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ; + break; + default: + return -EINVAL; + break; + } + } + + memset(usb, 0, sizeof(usb)); + usb->init_flags = flags; + + /* Initialize the USB state structure */ + { + int i; + usb->index = usb_port_number; + + /* Initialize the transaction double linked list */ + usb->free_transaction_head = NULL; + usb->free_transaction_tail = NULL; + for (i = 0; i < MAX_TRANSACTIONS; i++) + __cvmx_usb_free_transaction(usb, usb->transaction + i); + for (i = 0; i < MAX_PIPES; i++) + __cvmx_usb_append_pipe(&usb->free_pipes, usb->pipe + i); + } + + /* Power On Reset and PHY Initialization */ + + /* 1. Wait for DCOK to assert (nothing to do) */ + /* 2a. Write USBN0/1_CLK_CTL[POR] = 1 and + USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 */ + usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index)); + usbn_clk_ctl.s.por = 1; + usbn_clk_ctl.s.hrst = 0; + usbn_clk_ctl.s.prst = 0; + usbn_clk_ctl.s.hclk_rst = 0; + usbn_clk_ctl.s.enable = 0; + /* 2b. Select the USB reference clock/crystal parameters by writing + appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] */ + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) { + /* The USB port uses 12/24/48MHz 2.5V board clock + source at USB_XO. USB_XI should be tied to GND. + Most Octeon evaluation boards require this setting */ + if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */ + usbn_clk_ctl.cn31xx.p_xenbn = 0; + } else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) + usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */ + else + usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */ + + switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) { + case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ: + usbn_clk_ctl.s.p_c_sel = 0; + break; + case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ: + usbn_clk_ctl.s.p_c_sel = 1; + break; + case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ: + usbn_clk_ctl.s.p_c_sel = 2; + break; + } + } else { + /* The USB port uses a 12MHz crystal as clock source + at USB_XO and USB_XI */ + if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */ + usbn_clk_ctl.cn31xx.p_xenbn = 1; + } else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) + usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */ + else + usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */ + + usbn_clk_ctl.s.p_c_sel = 0; + } + /* 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and + setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down such + that USB is as close as possible to 125Mhz */ + { + int divisor = (octeon_get_clock_rate()+125000000-1)/125000000; + if (divisor < 4) /* Lower than 4 doesn't seem to work properly */ + divisor = 4; + usbn_clk_ctl.s.divide = divisor; + usbn_clk_ctl.s.divide2 = 0; + } + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */ + usbn_clk_ctl.s.hclk_rst = 1; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + /* 2e. Wait 64 core-clock cycles for HCLK to stabilize */ + cvmx_wait(64); + /* 3. Program the power-on reset field in the USBN clock-control register: + USBN_CLK_CTL[POR] = 0 */ + usbn_clk_ctl.s.por = 0; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + /* 4. Wait 1 ms for PHY clock to start */ + mdelay(1); + /* 5. Program the Reset input from automatic test equipment field in the + USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */ + usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index)); + usbn_usbp_ctl_status.s.ate_reset = 1; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), + usbn_usbp_ctl_status.u64); + /* 6. Wait 10 cycles */ + cvmx_wait(10); + /* 7. Clear ATE_RESET field in the USBN clock-control register: + USBN_USBP_CTL_STATUS[ATE_RESET] = 0 */ + usbn_usbp_ctl_status.s.ate_reset = 0; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), + usbn_usbp_ctl_status.u64); + /* 8. Program the PHY reset field in the USBN clock-control register: + USBN_CLK_CTL[PRST] = 1 */ + usbn_clk_ctl.s.prst = 1; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + /* 9. Program the USBP control and status register to select host or + device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for + device */ + usbn_usbp_ctl_status.s.hst_mode = 0; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), + usbn_usbp_ctl_status.u64); + /* 10. Wait 1 us */ + udelay(1); + /* 11. Program the hreset_n field in the USBN clock-control register: + USBN_CLK_CTL[HRST] = 1 */ + usbn_clk_ctl.s.hrst = 1; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + /* 12. Proceed to USB core initialization */ + usbn_clk_ctl.s.enable = 1; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + udelay(1); + + /* USB Core Initialization */ + + /* 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to + determine USB core configuration parameters. */ + /* Nothing needed */ + /* 2. Program the following fields in the global AHB configuration + register (USBC_GAHBCFG) + DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode + Burst length, USBC_GAHBCFG[HBSTLEN] = 0 + Nonperiodic TxFIFO empty level (slave mode only), + USBC_GAHBCFG[NPTXFEMPLVL] + Periodic TxFIFO empty level (slave mode only), + USBC_GAHBCFG[PTXFEMPLVL] + Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */ + { + cvmx_usbcx_gahbcfg_t usbcx_gahbcfg; + /* Due to an errata, CN31XX doesn't support DMA */ + if (OCTEON_IS_MODEL(OCTEON_CN31XX)) + usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA; + usbcx_gahbcfg.u32 = 0; + usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA); + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) + usb->idle_hardware_channels = 0x1; /* Only use one channel with non DMA */ + else if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) + usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */ + else + usb->idle_hardware_channels = 0xff; + usbcx_gahbcfg.s.hbstlen = 0; + usbcx_gahbcfg.s.nptxfemplvl = 1; + usbcx_gahbcfg.s.ptxfemplvl = 1; + usbcx_gahbcfg.s.glblintrmsk = 1; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index), + usbcx_gahbcfg.u32); + } + /* 3. Program the following fields in USBC_GUSBCFG register. + HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0 + ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0 + USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5 + PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */ + { + cvmx_usbcx_gusbcfg_t usbcx_gusbcfg; + usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index)); + usbcx_gusbcfg.s.toutcal = 0; + usbcx_gusbcfg.s.ddrsel = 0; + usbcx_gusbcfg.s.usbtrdtim = 0x5; + usbcx_gusbcfg.s.phylpwrclksel = 0; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index), + usbcx_gusbcfg.u32); + } + /* 4. The software must unmask the following bits in the USBC_GINTMSK + register. + OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1 + Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */ + { + cvmx_usbcx_gintmsk_t usbcx_gintmsk; + int channel; + + usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index)); + usbcx_gintmsk.s.otgintmsk = 1; + usbcx_gintmsk.s.modemismsk = 1; + usbcx_gintmsk.s.hchintmsk = 1; + usbcx_gintmsk.s.sofmsk = 0; + /* We need RX FIFO interrupts if we don't have DMA */ + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) + usbcx_gintmsk.s.rxflvlmsk = 1; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index), + usbcx_gintmsk.u32); + + /* Disable all channel interrupts. We'll enable them per channel later */ + for (channel = 0; channel < 8; channel++) + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0); + } + + { + /* Host Port Initialization */ + + /* 1. Program the host-port interrupt-mask field to unmask, + USBC_GINTMSK[PRTINT] = 1 */ + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, + prtintmsk, 1); + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, + disconnintmsk, 1); + /* 2. Program the USBC_HCFG register to select full-speed host or + high-speed host. */ + { + cvmx_usbcx_hcfg_t usbcx_hcfg; + usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index)); + usbcx_hcfg.s.fslssupp = 0; + usbcx_hcfg.s.fslspclksel = 0; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32); + } + /* 3. Program the port power bit to drive VBUS on the USB, + USBC_HPRT[PRTPWR] = 1 */ + USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtpwr, 1); + + /* Steps 4-15 from the manual are done later in the port enable */ + } + + return 0; } @@ -787,33 +781,33 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, * function is called. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * * @return 0 or a negative error code. */ int cvmx_usb_shutdown(cvmx_usb_state_t *state) { - cvmx_usbnx_clk_ctl_t usbn_clk_ctl; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - /* Make sure all pipes are closed */ - if (usb->idle_pipes.head || - usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS].head || - usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT].head || - usb->active_pipes[CVMX_USB_TRANSFER_CONTROL].head || - usb->active_pipes[CVMX_USB_TRANSFER_BULK].head) - return -EBUSY; - - /* Disable the clocks and put them in power on reset */ - usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index)); - usbn_clk_ctl.s.enable = 1; - usbn_clk_ctl.s.por = 1; - usbn_clk_ctl.s.hclk_rst = 1; - usbn_clk_ctl.s.prst = 0; - usbn_clk_ctl.s.hrst = 0; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), - usbn_clk_ctl.u64); - return 0; + cvmx_usbnx_clk_ctl_t usbn_clk_ctl; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + /* Make sure all pipes are closed */ + if (usb->idle_pipes.head || + usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS].head || + usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT].head || + usb->active_pipes[CVMX_USB_TRANSFER_CONTROL].head || + usb->active_pipes[CVMX_USB_TRANSFER_BULK].head) + return -EBUSY; + + /* Disable the clocks and put them in power on reset */ + usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index)); + usbn_clk_ctl.s.enable = 1; + usbn_clk_ctl.s.por = 1; + usbn_clk_ctl.s.hclk_rst = 1; + usbn_clk_ctl.s.prst = 0; + usbn_clk_ctl.s.hrst = 0; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), + usbn_clk_ctl.u64); + return 0; } @@ -822,79 +816,79 @@ int cvmx_usb_shutdown(cvmx_usb_state_t *state) * online and servicing requests. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * * @return 0 or a negative error code. */ int cvmx_usb_enable(cvmx_usb_state_t *state) { - cvmx_usbcx_ghwcfg3_t usbcx_ghwcfg3; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - - /* If the port is already enabled the just return. We don't need to do - anything */ - if (usb->usbcx_hprt.s.prtena) - return 0; - - /* If there is nothing plugged into the port then fail immediately */ - if (!usb->usbcx_hprt.s.prtconnsts) { - return -ETIMEDOUT; - } - - /* Program the port reset bit to start the reset process */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 1); - - /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset - process to complete. */ - mdelay(50); - - /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0); - - /* Wait for the USBC_HPRT[PRTENA]. */ - if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, - prtena, ==, 1, 100000)) - return -ETIMEDOUT; - - /* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */ - usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index)); - - /* 13. Program the USBC_GRXFSIZ register to select the size of the receive - FIFO (25%). */ - USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz_t, - rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4); - /* 14. Program the USBC_GNPTXFSIZ register to select the size and the - start address of the non- periodic transmit FIFO for nonperiodic - transactions (50%). */ - { - cvmx_usbcx_gnptxfsiz_t siz; - siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index)); - siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2; - siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32); - } - /* 15. Program the USBC_HPTXFSIZ register to select the size and start - address of the periodic transmit FIFO for periodic transactions (25%). */ - { - cvmx_usbcx_hptxfsiz_t siz; - siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index)); - siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4; - siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32); - } - /* Flush all FIFOs */ - USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfnum, 0x10); - USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfflsh, 1); - CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, - txfflsh, ==, 0, 100); - USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, rxfflsh, 1); - CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, - rxfflsh, ==, 0, 100); - - return 0; + cvmx_usbcx_ghwcfg3_t usbcx_ghwcfg3; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); + + /* If the port is already enabled the just return. We don't need to do + anything */ + if (usb->usbcx_hprt.s.prtena) + return 0; + + /* If there is nothing plugged into the port then fail immediately */ + if (!usb->usbcx_hprt.s.prtconnsts) { + return -ETIMEDOUT; + } + + /* Program the port reset bit to start the reset process */ + USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 1); + + /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset + process to complete. */ + mdelay(50); + + /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */ + USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0); + + /* Wait for the USBC_HPRT[PRTENA]. */ + if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, + prtena, ==, 1, 100000)) + return -ETIMEDOUT; + + /* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */ + usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); + usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index)); + + /* 13. Program the USBC_GRXFSIZ register to select the size of the receive + FIFO (25%). */ + USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz_t, + rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4); + /* 14. Program the USBC_GNPTXFSIZ register to select the size and the + start address of the non- periodic transmit FIFO for nonperiodic + transactions (50%). */ + { + cvmx_usbcx_gnptxfsiz_t siz; + siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index)); + siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2; + siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32); + } + /* 15. Program the USBC_HPTXFSIZ register to select the size and start + address of the periodic transmit FIFO for periodic transactions (25%). */ + { + cvmx_usbcx_hptxfsiz_t siz; + siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index)); + siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4; + siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32); + } + /* Flush all FIFOs */ + USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfnum, 0x10); + USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfflsh, 1); + CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, + txfflsh, ==, 0, 100); + USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, rxfflsh, 1); + CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, + rxfflsh, ==, 0, 100); + + return 0; } @@ -905,17 +899,17 @@ int cvmx_usb_enable(cvmx_usb_state_t *state) * associated callbacks. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * * @return 0 or a negative error code. */ int cvmx_usb_disable(cvmx_usb_state_t *state) { - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; - /* Disable the port */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtena, 1); - return 0; + /* Disable the port */ + USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtena, 1); + return 0; } @@ -929,27 +923,27 @@ int cvmx_usb_disable(cvmx_usb_state_t *state) * them, you must update the status through cvmx_usb_set_status(). * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * * @return Port status information */ cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state) { - cvmx_usbcx_hprt_t usbc_hprt; - cvmx_usb_port_status_t result; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; + cvmx_usbcx_hprt_t usbc_hprt; + cvmx_usb_port_status_t result; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; - memset(&result, 0, sizeof(result)); + memset(&result, 0, sizeof(result)); - usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - result.port_enabled = usbc_hprt.s.prtena; - result.port_over_current = usbc_hprt.s.prtovrcurract; - result.port_powered = usbc_hprt.s.prtpwr; - result.port_speed = usbc_hprt.s.prtspd; - result.connected = usbc_hprt.s.prtconnsts; - result.connect_change = (result.connected != usb->port_status.connected); + usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); + result.port_enabled = usbc_hprt.s.prtena; + result.port_over_current = usbc_hprt.s.prtovrcurract; + result.port_powered = usbc_hprt.s.prtpwr; + result.port_speed = usbc_hprt.s.prtspd; + result.connected = usbc_hprt.s.prtconnsts; + result.connect_change = (result.connected != usb->port_status.connected); - return result; + return result; } @@ -961,15 +955,15 @@ cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state) * changed through this call. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * @param port_status - * Port status to set, most like returned by cvmx_usb_get_status() + * Port status to set, most like returned by cvmx_usb_get_status() */ void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status) { - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - usb->port_status = port_status; - return; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + usb->port_status = port_status; + return; } @@ -978,17 +972,17 @@ void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_st * Convert a USB transaction into a handle * * @param usb USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * @param transaction - * Transaction to get handle for + * Transaction to get handle for * * @return Handle */ static inline int __cvmx_usb_get_submit_handle(cvmx_usb_internal_state_t *usb, - cvmx_usb_transaction_t *transaction) + cvmx_usb_transaction_t *transaction) { - return ((unsigned long)transaction - (unsigned long)usb->transaction) / - sizeof(*transaction); + return ((unsigned long)transaction - (unsigned long)usb->transaction) / + sizeof(*transaction); } @@ -997,15 +991,15 @@ static inline int __cvmx_usb_get_submit_handle(cvmx_usb_internal_state_t *usb, * Convert a USB pipe into a handle * * @param usb USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * @param pipe Pipe to get handle for * * @return Handle */ static inline int __cvmx_usb_get_pipe_handle(cvmx_usb_internal_state_t *usb, - cvmx_usb_pipe_t *pipe) + cvmx_usb_pipe_t *pipe) { - return ((unsigned long)pipe - (unsigned long)usb->pipe) / sizeof(*pipe); + return ((unsigned long)pipe - (unsigned long)usb->pipe) / sizeof(*pipe); } @@ -1014,134 +1008,133 @@ static inline int __cvmx_usb_get_pipe_handle(cvmx_usb_internal_state_t *usb, * must be opened before data can be transferred between a device * and Octeon. * - * @param state USB device state populated by - * cvmx_usb_initialize(). - * @param flags Optional pipe flags defined in - * cvmx_usb_pipe_flags_t. + * @param state USB device state populated by + * cvmx_usb_initialize(). + * @param flags Optional pipe flags defined in + * cvmx_usb_pipe_flags_t. * @param device_addr - * USB device address to open the pipe to - * (0-127). + * USB device address to open the pipe to + * (0-127). * @param endpoint_num - * USB endpoint number to open the pipe to - * (0-15). + * USB endpoint number to open the pipe to + * (0-15). * @param device_speed - * The speed of the device the pipe is going - * to. This must match the device's speed, - * which may be different than the port speed. + * The speed of the device the pipe is going + * to. This must match the device's speed, + * which may be different than the port speed. * @param max_packet The maximum packet length the device can - * transmit/receive (low speed=0-8, full - * speed=0-1023, high speed=0-1024). This value - * comes from the standard endpoint descriptor - * field wMaxPacketSize bits <10:0>. + * transmit/receive (low speed=0-8, full + * speed=0-1023, high speed=0-1024). This value + * comes from the standard endpoint descriptor + * field wMaxPacketSize bits <10:0>. * @param transfer_type - * The type of transfer this pipe is for. + * The type of transfer this pipe is for. * @param transfer_dir - * The direction the pipe is in. This is not - * used for control pipes. + * The direction the pipe is in. This is not + * used for control pipes. * @param interval For ISOCHRONOUS and INTERRUPT transfers, - * this is how often the transfer is scheduled - * for. All other transfers should specify - * zero. The units are in frames (8000/sec at - * high speed, 1000/sec for full speed). + * this is how often the transfer is scheduled + * for. All other transfers should specify + * zero. The units are in frames (8000/sec at + * high speed, 1000/sec for full speed). * @param multi_count - * For high speed devices, this is the maximum - * allowed number of packet per microframe. - * Specify zero for non high speed devices. This - * value comes from the standard endpoint descriptor - * field wMaxPacketSize bits <12:11>. + * For high speed devices, this is the maximum + * allowed number of packet per microframe. + * Specify zero for non high speed devices. This + * value comes from the standard endpoint descriptor + * field wMaxPacketSize bits <12:11>. * @param hub_device_addr - * Hub device address this device is connected - * to. Devices connected directly to Octeon - * use zero. This is only used when the device - * is full/low speed behind a high speed hub. - * The address will be of the high speed hub, - * not and full speed hubs after it. + * Hub device address this device is connected + * to. Devices connected directly to Octeon + * use zero. This is only used when the device + * is full/low speed behind a high speed hub. + * The address will be of the high speed hub, + * not and full speed hubs after it. * @param hub_port Which port on the hub the device is - * connected. Use zero for devices connected - * directly to Octeon. Like hub_device_addr, - * this is only used for full/low speed - * devices behind a high speed hub. + * connected. Use zero for devices connected + * directly to Octeon. Like hub_device_addr, + * this is only used for full/low speed + * devices behind a high speed hub. * * @return A non negative value is a pipe handle. Negative - * values are error codes. + * values are error codes. */ int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags, - int device_addr, int endpoint_num, - cvmx_usb_speed_t device_speed, int max_packet, - cvmx_usb_transfer_t transfer_type, - cvmx_usb_direction_t transfer_dir, int interval, - int multi_count, int hub_device_addr, int hub_port) + int device_addr, int endpoint_num, + cvmx_usb_speed_t device_speed, int max_packet, + cvmx_usb_transfer_t transfer_type, + cvmx_usb_direction_t transfer_dir, int interval, + int multi_count, int hub_device_addr, int hub_port) { - cvmx_usb_pipe_t *pipe; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - if (unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS))) - return -EINVAL; - if (unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT))) - return -EINVAL; - if (unlikely(device_speed > CVMX_USB_SPEED_LOW)) - return -EINVAL; - if (unlikely((max_packet <= 0) || (max_packet > 1024))) - return -EINVAL; - if (unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT)) - return -EINVAL; - if (unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) && - (transfer_dir != CVMX_USB_DIRECTION_IN))) - return -EINVAL; - if (unlikely(interval < 0)) - return -EINVAL; - if (unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval)) - return -EINVAL; - if (unlikely(multi_count < 0)) - return -EINVAL; - if (unlikely((device_speed != CVMX_USB_SPEED_HIGH) && - (multi_count != 0))) - return -EINVAL; - if (unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS))) - return -EINVAL; - if (unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT))) - return -EINVAL; - - /* Find a free pipe */ - pipe = usb->free_pipes.head; - if (!pipe) - return -ENOMEM; - __cvmx_usb_remove_pipe(&usb->free_pipes, pipe); - pipe->flags = flags | __CVMX_USB_PIPE_FLAGS_OPEN; - if ((device_speed == CVMX_USB_SPEED_HIGH) && - (transfer_dir == CVMX_USB_DIRECTION_OUT) && - (transfer_type == CVMX_USB_TRANSFER_BULK)) - pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; - pipe->device_addr = device_addr; - pipe->endpoint_num = endpoint_num; - pipe->device_speed = device_speed; - pipe->max_packet = max_packet; - pipe->transfer_type = transfer_type; - pipe->transfer_dir = transfer_dir; - /* All pipes use interval to rate limit NAK processing. Force an interval - if one wasn't supplied */ - if (!interval) - interval = 1; - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - pipe->interval = interval*8; - /* Force start splits to be schedule on uFrame 0 */ - pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval; - } - else { - pipe->interval = interval; - pipe->next_tx_frame = usb->frame_number + pipe->interval; - } - pipe->multi_count = multi_count; - pipe->hub_device_addr = hub_device_addr; - pipe->hub_port = hub_port; - pipe->pid_toggle = 0; - pipe->split_sc_frame = -1; - __cvmx_usb_append_pipe(&usb->idle_pipes, pipe); - - /* We don't need to tell the hardware about this pipe yet since - it doesn't have any submitted requests */ - - return __cvmx_usb_get_pipe_handle(usb, pipe); + cvmx_usb_pipe_t *pipe; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + if (unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS))) + return -EINVAL; + if (unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT))) + return -EINVAL; + if (unlikely(device_speed > CVMX_USB_SPEED_LOW)) + return -EINVAL; + if (unlikely((max_packet <= 0) || (max_packet > 1024))) + return -EINVAL; + if (unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT)) + return -EINVAL; + if (unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) && + (transfer_dir != CVMX_USB_DIRECTION_IN))) + return -EINVAL; + if (unlikely(interval < 0)) + return -EINVAL; + if (unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval)) + return -EINVAL; + if (unlikely(multi_count < 0)) + return -EINVAL; + if (unlikely((device_speed != CVMX_USB_SPEED_HIGH) && + (multi_count != 0))) + return -EINVAL; + if (unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS))) + return -EINVAL; + if (unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT))) + return -EINVAL; + + /* Find a free pipe */ + pipe = usb->free_pipes.head; + if (!pipe) + return -ENOMEM; + __cvmx_usb_remove_pipe(&usb->free_pipes, pipe); + pipe->flags = flags | __CVMX_USB_PIPE_FLAGS_OPEN; + if ((device_speed == CVMX_USB_SPEED_HIGH) && + (transfer_dir == CVMX_USB_DIRECTION_OUT) && + (transfer_type == CVMX_USB_TRANSFER_BULK)) + pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; + pipe->device_addr = device_addr; + pipe->endpoint_num = endpoint_num; + pipe->device_speed = device_speed; + pipe->max_packet = max_packet; + pipe->transfer_type = transfer_type; + pipe->transfer_dir = transfer_dir; + /* All pipes use interval to rate limit NAK processing. Force an interval + if one wasn't supplied */ + if (!interval) + interval = 1; + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + pipe->interval = interval*8; + /* Force start splits to be schedule on uFrame 0 */ + pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval; + } else { + pipe->interval = interval; + pipe->next_tx_frame = usb->frame_number + pipe->interval; + } + pipe->multi_count = multi_count; + pipe->hub_device_addr = hub_device_addr; + pipe->hub_port = hub_port; + pipe->pid_toggle = 0; + pipe->split_sc_frame = -1; + __cvmx_usb_append_pipe(&usb->idle_pipes, pipe); + + /* We don't need to tell the hardware about this pipe yet since + it doesn't have any submitted requests */ + + return __cvmx_usb_get_pipe_handle(usb, pipe); } @@ -1151,43 +1144,43 @@ int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags, * in non DMA mode. It is very important that this function be called quickly * enough to prevent FIFO overflow. * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). */ static void __cvmx_usb_poll_rx_fifo(cvmx_usb_internal_state_t *usb) { - cvmx_usbcx_grxstsph_t rx_status; - int channel; - int bytes; - uint64_t address; - uint32_t *ptr; - - rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index)); - /* Only read data if IN data is there */ - if (rx_status.s.pktsts != 2) - return; - /* Check if no data is available */ - if (!rx_status.s.bcnt) - return; - - channel = rx_status.s.chnum; - bytes = rx_status.s.bcnt; - if (!bytes) - return; - - /* Get where the DMA engine would have written this data */ - address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8); - ptr = cvmx_phys_to_ptr(address); - __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes); - - /* Loop writing the FIFO data for this packet into memory */ - while (bytes > 0) { - *ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index)); - bytes -= 4; - } - CVMX_SYNCW; - - return; + cvmx_usbcx_grxstsph_t rx_status; + int channel; + int bytes; + uint64_t address; + uint32_t *ptr; + + rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index)); + /* Only read data if IN data is there */ + if (rx_status.s.pktsts != 2) + return; + /* Check if no data is available */ + if (!rx_status.s.bcnt) + return; + + channel = rx_status.s.chnum; + bytes = rx_status.s.bcnt; + if (!bytes) + return; + + /* Get where the DMA engine would have written this data */ + address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8); + ptr = cvmx_phys_to_ptr(address); + __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes); + + /* Loop writing the FIFO data for this packet into memory */ + while (bytes > 0) { + *ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index)); + bytes -= 4; + } + CVMX_SYNCW; + + return; } @@ -1195,85 +1188,85 @@ static void __cvmx_usb_poll_rx_fifo(cvmx_usb_internal_state_t *usb) * Fill the TX hardware fifo with data out of the software * fifos * - * @param usb USB device state populated by - * cvmx_usb_initialize(). - * @param fifo Software fifo to use + * @param usb USB device state populated by + * cvmx_usb_initialize(). + * @param fifo Software fifo to use * @param available Amount of space in the hardware fifo * * @return Non zero if the hardware fifo was too small and needs - * to be serviced again. + * to be serviced again. */ static int __cvmx_usb_fill_tx_hw(cvmx_usb_internal_state_t *usb, cvmx_usb_tx_fifo_t *fifo, int available) { - /* We're done either when there isn't anymore space or the software FIFO - is empty */ - while (available && (fifo->head != fifo->tail)) { - int i = fifo->tail; - const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address); - uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4; - int words = available; - - /* Limit the amount of data to waht the SW fifo has */ - if (fifo->entry[i].size <= available) { - words = fifo->entry[i].size; - fifo->tail++; - if (fifo->tail > MAX_CHANNELS) - fifo->tail = 0; - } - - /* Update the next locations and counts */ - available -= words; - fifo->entry[i].address += words * 4; - fifo->entry[i].size -= words; - - /* Write the HW fifo data. The read every three writes is due - to an errata on CN3XXX chips */ - while (words > 3) { - cvmx_write64_uint32(csr_address, *ptr++); - cvmx_write64_uint32(csr_address, *ptr++); - cvmx_write64_uint32(csr_address, *ptr++); - cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); - words -= 3; - } - cvmx_write64_uint32(csr_address, *ptr++); - if (--words) { - cvmx_write64_uint32(csr_address, *ptr++); - if (--words) - cvmx_write64_uint32(csr_address, *ptr++); - } - cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); - } - return fifo->head != fifo->tail; + /* We're done either when there isn't anymore space or the software FIFO + is empty */ + while (available && (fifo->head != fifo->tail)) { + int i = fifo->tail; + const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address); + uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4; + int words = available; + + /* Limit the amount of data to waht the SW fifo has */ + if (fifo->entry[i].size <= available) { + words = fifo->entry[i].size; + fifo->tail++; + if (fifo->tail > MAX_CHANNELS) + fifo->tail = 0; + } + + /* Update the next locations and counts */ + available -= words; + fifo->entry[i].address += words * 4; + fifo->entry[i].size -= words; + + /* Write the HW fifo data. The read every three writes is due + to an errata on CN3XXX chips */ + while (words > 3) { + cvmx_write64_uint32(csr_address, *ptr++); + cvmx_write64_uint32(csr_address, *ptr++); + cvmx_write64_uint32(csr_address, *ptr++); + cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); + words -= 3; + } + cvmx_write64_uint32(csr_address, *ptr++); + if (--words) { + cvmx_write64_uint32(csr_address, *ptr++); + if (--words) + cvmx_write64_uint32(csr_address, *ptr++); + } + cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); + } + return fifo->head != fifo->tail; } /** * Check the hardware FIFOs and fill them as needed * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). */ static void __cvmx_usb_poll_tx_fifo(cvmx_usb_internal_state_t *usb) { - if (usb->periodic.head != usb->periodic.tail) { - cvmx_usbcx_hptxsts_t tx_status; - tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index)); - if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail)) - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 1); - else - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 0); - } - - if (usb->nonperiodic.head != usb->nonperiodic.tail) { - cvmx_usbcx_gnptxsts_t tx_status; - tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index)); - if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail)) - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 1); - else - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 0); - } - - return; + if (usb->periodic.head != usb->periodic.tail) { + cvmx_usbcx_hptxsts_t tx_status; + tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index)); + if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail)) + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 1); + else + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 0); + } + + if (usb->nonperiodic.head != usb->nonperiodic.tail) { + cvmx_usbcx_gnptxsts_t tx_status; + tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index)); + if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail)) + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 1); + else + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 0); + } + + return; } @@ -1281,48 +1274,48 @@ static void __cvmx_usb_poll_tx_fifo(cvmx_usb_internal_state_t *usb) * @INTERNAL * Fill the TX FIFO with an outgoing packet * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). * @param channel Channel number to get packet from */ static void __cvmx_usb_fill_tx_fifo(cvmx_usb_internal_state_t *usb, int channel) { - cvmx_usbcx_hccharx_t hcchar; - cvmx_usbcx_hcspltx_t usbc_hcsplt; - cvmx_usbcx_hctsizx_t usbc_hctsiz; - cvmx_usb_tx_fifo_t *fifo; - - /* We only need to fill data on outbound channels */ - hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); - if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT) - return; - - /* OUT Splits only have data on the start and not the complete */ - usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index)); - if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt) - return; - - /* Find out how many bytes we need to fill and convert it into 32bit words */ - usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); - if (!usbc_hctsiz.s.xfersize) - return; - - if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) || - (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS)) - fifo = &usb->periodic; - else - fifo = &usb->nonperiodic; - - fifo->entry[fifo->head].channel = channel; - fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8); - fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2; - fifo->head++; - if (fifo->head > MAX_CHANNELS) - fifo->head = 0; - - __cvmx_usb_poll_tx_fifo(usb); - - return; + cvmx_usbcx_hccharx_t hcchar; + cvmx_usbcx_hcspltx_t usbc_hcsplt; + cvmx_usbcx_hctsizx_t usbc_hctsiz; + cvmx_usb_tx_fifo_t *fifo; + + /* We only need to fill data on outbound channels */ + hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); + if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT) + return; + + /* OUT Splits only have data on the start and not the complete */ + usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index)); + if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt) + return; + + /* Find out how many bytes we need to fill and convert it into 32bit words */ + usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); + if (!usbc_hctsiz.s.xfersize) + return; + + if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) || + (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS)) + fifo = &usb->periodic; + else + fifo = &usb->nonperiodic; + + fifo->entry[fifo->head].channel = channel; + fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8); + fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2; + fifo->head++; + if (fifo->head > MAX_CHANNELS) + fifo->head = 0; + + __cvmx_usb_poll_tx_fifo(usb); + + return; } /** @@ -1331,120 +1324,119 @@ static void __cvmx_usb_fill_tx_fifo(cvmx_usb_internal_state_t *usb, int channel) * the generic stuff will already have been done in * __cvmx_usb_start_channel() * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). * @param channel Channel to setup - * @param pipe Pipe for control transaction + * @param pipe Pipe for control transaction */ static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb, - int channel, - cvmx_usb_pipe_t *pipe) + int channel, + cvmx_usb_pipe_t *pipe) { - cvmx_usb_transaction_t *transaction = pipe->head; - cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); - int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes; - int packets_to_transfer; - cvmx_usbcx_hctsizx_t usbc_hctsiz; - - usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); - - switch (transaction->stage) { - case CVMX_USB_STAGE_NON_CONTROL: - case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE: - cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__); - break; - case CVMX_USB_STAGE_SETUP: - usbc_hctsiz.s.pid = 3; /* Setup */ - bytes_to_transfer = sizeof(*header); - /* All Control operations start with a setup going OUT */ - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT); - /* Setup send the control header instead of the buffer data. The - buffer data will be used in the next stage */ - __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header); - break; - case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: - usbc_hctsiz.s.pid = 3; /* Setup */ - bytes_to_transfer = 0; - /* All Control operations start with a setup going OUT */ - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT); - USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1); - break; - case CVMX_USB_STAGE_DATA: - usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - if (header->s.request_type & 0x80) - bytes_to_transfer = 0; - else if (bytes_to_transfer > pipe->max_packet) - bytes_to_transfer = pipe->max_packet; - } - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx_t, epdir, - ((header->s.request_type & 0x80) ? - CVMX_USB_DIRECTION_IN : - CVMX_USB_DIRECTION_OUT)); - break; - case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: - usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); - if (!(header->s.request_type & 0x80)) - bytes_to_transfer = 0; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx_t, epdir, - ((header->s.request_type & 0x80) ? - CVMX_USB_DIRECTION_IN : - CVMX_USB_DIRECTION_OUT)); - USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1); - break; - case CVMX_USB_STAGE_STATUS: - usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); - bytes_to_transfer = 0; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, - ((header->s.request_type & 0x80) ? - CVMX_USB_DIRECTION_OUT : - CVMX_USB_DIRECTION_IN)); - break; - case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE: - usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); - bytes_to_transfer = 0; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, - ((header->s.request_type & 0x80) ? - CVMX_USB_DIRECTION_OUT : - CVMX_USB_DIRECTION_IN)); - USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1); - break; - } - - /* Make sure the transfer never exceeds the byte limit of the hardware. - Further bytes will be sent as continued transactions */ - if (bytes_to_transfer > MAX_TRANSFER_BYTES) { - /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ - bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; - bytes_to_transfer *= pipe->max_packet; - } - - /* Calculate the number of packets to transfer. If the length is zero - we still need to transfer one packet */ - packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; - if (packets_to_transfer == 0) - packets_to_transfer = 1; - else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { - /* Limit to one packet when not using DMA. Channels must be restarted - between every packet for IN transactions, so there is no reason to - do multiple packets in a row */ - packets_to_transfer = 1; - bytes_to_transfer = packets_to_transfer * pipe->max_packet; - } - else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { - /* Limit the number of packet and data transferred to what the - hardware can handle */ - packets_to_transfer = MAX_TRANSFER_PACKETS; - bytes_to_transfer = packets_to_transfer * pipe->max_packet; - } - - usbc_hctsiz.s.xfersize = bytes_to_transfer; - usbc_hctsiz.s.pktcnt = packets_to_transfer; - - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32); - return; + cvmx_usb_transaction_t *transaction = pipe->head; + cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); + int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes; + int packets_to_transfer; + cvmx_usbcx_hctsizx_t usbc_hctsiz; + + usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); + + switch (transaction->stage) { + case CVMX_USB_STAGE_NON_CONTROL: + case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE: + cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__); + break; + case CVMX_USB_STAGE_SETUP: + usbc_hctsiz.s.pid = 3; /* Setup */ + bytes_to_transfer = sizeof(*header); + /* All Control operations start with a setup going OUT */ + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT); + /* Setup send the control header instead of the buffer data. The + buffer data will be used in the next stage */ + __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header); + break; + case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: + usbc_hctsiz.s.pid = 3; /* Setup */ + bytes_to_transfer = 0; + /* All Control operations start with a setup going OUT */ + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT); + USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1); + break; + case CVMX_USB_STAGE_DATA: + usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + if (header->s.request_type & 0x80) + bytes_to_transfer = 0; + else if (bytes_to_transfer > pipe->max_packet) + bytes_to_transfer = pipe->max_packet; + } + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), + cvmx_usbcx_hccharx_t, epdir, + ((header->s.request_type & 0x80) ? + CVMX_USB_DIRECTION_IN : + CVMX_USB_DIRECTION_OUT)); + break; + case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: + usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); + if (!(header->s.request_type & 0x80)) + bytes_to_transfer = 0; + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), + cvmx_usbcx_hccharx_t, epdir, + ((header->s.request_type & 0x80) ? + CVMX_USB_DIRECTION_IN : + CVMX_USB_DIRECTION_OUT)); + USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1); + break; + case CVMX_USB_STAGE_STATUS: + usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); + bytes_to_transfer = 0; + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, + ((header->s.request_type & 0x80) ? + CVMX_USB_DIRECTION_OUT : + CVMX_USB_DIRECTION_IN)); + break; + case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE: + usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); + bytes_to_transfer = 0; + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, + ((header->s.request_type & 0x80) ? + CVMX_USB_DIRECTION_OUT : + CVMX_USB_DIRECTION_IN)); + USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1); + break; + } + + /* Make sure the transfer never exceeds the byte limit of the hardware. + Further bytes will be sent as continued transactions */ + if (bytes_to_transfer > MAX_TRANSFER_BYTES) { + /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ + bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; + bytes_to_transfer *= pipe->max_packet; + } + + /* Calculate the number of packets to transfer. If the length is zero + we still need to transfer one packet */ + packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; + if (packets_to_transfer == 0) + packets_to_transfer = 1; + else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { + /* Limit to one packet when not using DMA. Channels must be restarted + between every packet for IN transactions, so there is no reason to + do multiple packets in a row */ + packets_to_transfer = 1; + bytes_to_transfer = packets_to_transfer * pipe->max_packet; + } else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { + /* Limit the number of packet and data transferred to what the + hardware can handle */ + packets_to_transfer = MAX_TRANSFER_PACKETS; + bytes_to_transfer = packets_to_transfer * pipe->max_packet; + } + + usbc_hctsiz.s.xfersize = bytes_to_transfer; + usbc_hctsiz.s.pktcnt = packets_to_transfer; + + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32); + return; } @@ -1452,273 +1444,270 @@ static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb, * @INTERNAL * Start a channel to perform the pipe's head transaction * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). * @param channel Channel to setup - * @param pipe Pipe to start + * @param pipe Pipe to start */ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, - int channel, - cvmx_usb_pipe_t *pipe) + int channel, + cvmx_usb_pipe_t *pipe) { - cvmx_usb_transaction_t *transaction = pipe->head; - - /* Make sure all writes to the DMA region get flushed */ - CVMX_SYNCW; - - /* Attach the channel to the pipe */ - usb->pipe_for_channel[channel] = pipe; - pipe->channel = channel; - pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED; - - /* Mark this channel as in use */ - usb->idle_hardware_channels &= ~(1<index)); - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32); - - usbc_hcintmsk.u32 = 0; - usbc_hcintmsk.s.chhltdmsk = 1; - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { - /* Channels need these extra interrupts when we aren't in DMA mode */ - usbc_hcintmsk.s.datatglerrmsk = 1; - usbc_hcintmsk.s.frmovrunmsk = 1; - usbc_hcintmsk.s.bblerrmsk = 1; - usbc_hcintmsk.s.xacterrmsk = 1; - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* Splits don't generate xfercompl, so we need ACK and NYET */ - usbc_hcintmsk.s.nyetmsk = 1; - usbc_hcintmsk.s.ackmsk = 1; - } - usbc_hcintmsk.s.nakmsk = 1; - usbc_hcintmsk.s.stallmsk = 1; - usbc_hcintmsk.s.xfercomplmsk = 1; - } - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32); - - /* Enable the channel interrupt to propagate */ - usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index)); - usbc_haintmsk.s.haintmsk |= 1<index), usbc_haintmsk.u32); - } - - /* Setup the locations the DMA engines use */ - { - uint64_t dma_address = transaction->buffer + transaction->actual_bytes; - if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) - dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes; - __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address); - __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address); - } - - /* Setup both the size of the transfer and the SPLIT characteristics */ - { - cvmx_usbcx_hcspltx_t usbc_hcsplt = {.u32 = 0}; - cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = 0}; - int packets_to_transfer; - int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes; - - /* ISOCHRONOUS transactions store each individual transfer size in the - packet structure, not the global buffer_length */ - if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) - bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes; - - /* We need to do split transactions when we are talking to non high - speed devices that are behind a high speed hub */ - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* On the start split phase (stage is even) record the frame number we - will need to send the split complete. We only store the lower two bits - since the time ahead can only be two frames */ - if ((transaction->stage&1) == 0) { - if (transaction->type == CVMX_USB_TRANSFER_BULK) - pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f; - else - pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f; - } - else - pipe->split_sc_frame = -1; - - usbc_hcsplt.s.spltena = 1; - usbc_hcsplt.s.hubaddr = pipe->hub_device_addr; - usbc_hcsplt.s.prtaddr = pipe->hub_port; - usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE); - - /* SPLIT transactions can only ever transmit one data packet so - limit the transfer size to the max packet size */ - if (bytes_to_transfer > pipe->max_packet) - bytes_to_transfer = pipe->max_packet; - - /* ISOCHRONOUS OUT splits are unique in that they limit - data transfers to 188 byte chunks representing the - begin/middle/end of the data or all */ - if (!usbc_hcsplt.s.compsplt && - (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && - (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { - /* Clear the split complete frame number as there isn't going - to be a split complete */ - pipe->split_sc_frame = -1; - /* See if we've started this transfer and sent data */ - if (transaction->actual_bytes == 0) { - /* Nothing sent yet, this is either a begin or the - entire payload */ - if (bytes_to_transfer <= 188) - usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */ - else - usbc_hcsplt.s.xactpos = 2; /* First part of payload */ - } - else { - /* Continuing the previous data, we must either be - in the middle or at the end */ - if (bytes_to_transfer <= 188) - usbc_hcsplt.s.xactpos = 1; /* End of payload */ - else - usbc_hcsplt.s.xactpos = 0; /* Middle of payload */ - } - /* Again, the transfer size is limited to 188 bytes */ - if (bytes_to_transfer > 188) - bytes_to_transfer = 188; - } - } - - /* Make sure the transfer never exceeds the byte limit of the hardware. - Further bytes will be sent as continued transactions */ - if (bytes_to_transfer > MAX_TRANSFER_BYTES) { - /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ - bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; - bytes_to_transfer *= pipe->max_packet; - } - - /* Calculate the number of packets to transfer. If the length is zero - we still need to transfer one packet */ - packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; - if (packets_to_transfer == 0) - packets_to_transfer = 1; - else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { - /* Limit to one packet when not using DMA. Channels must be restarted - between every packet for IN transactions, so there is no reason to - do multiple packets in a row */ - packets_to_transfer = 1; - bytes_to_transfer = packets_to_transfer * pipe->max_packet; - } - else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { - /* Limit the number of packet and data transferred to what the - hardware can handle */ - packets_to_transfer = MAX_TRANSFER_PACKETS; - bytes_to_transfer = packets_to_transfer * pipe->max_packet; - } - - usbc_hctsiz.s.xfersize = bytes_to_transfer; - usbc_hctsiz.s.pktcnt = packets_to_transfer; - - /* Update the DATA0/DATA1 toggle */ - usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); - /* High speed pipes may need a hardware ping before they start */ - if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING) - usbc_hctsiz.s.dopng = 1; - - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32); - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32); - } - - /* Setup the Host Channel Characteristics Register */ - { - cvmx_usbcx_hccharx_t usbc_hcchar = {.u32 = 0}; - - /* Set the startframe odd/even properly. This is only used for periodic */ - usbc_hcchar.s.oddfrm = usb->frame_number&1; - - /* Set the number of back to back packets allowed by this endpoint. - Split transactions interpret "ec" as the number of immediate - retries of failure. These retries happen too quickly, so we - disable these entirely for splits */ - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - usbc_hcchar.s.ec = 1; - else if (pipe->multi_count < 1) - usbc_hcchar.s.ec = 1; - else if (pipe->multi_count > 3) - usbc_hcchar.s.ec = 3; - else - usbc_hcchar.s.ec = pipe->multi_count; - - /* Set the rest of the endpoint specific settings */ - usbc_hcchar.s.devaddr = pipe->device_addr; - usbc_hcchar.s.eptype = transaction->type; - usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW); - usbc_hcchar.s.epdir = pipe->transfer_dir; - usbc_hcchar.s.epnum = pipe->endpoint_num; - usbc_hcchar.s.mps = pipe->max_packet; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); - } - - /* Do transaction type specific fixups as needed */ - switch (transaction->type) { - case CVMX_USB_TRANSFER_CONTROL: - __cvmx_usb_start_channel_control(usb, channel, pipe); - break; - case CVMX_USB_TRANSFER_BULK: - case CVMX_USB_TRANSFER_INTERRUPT: - break; - case CVMX_USB_TRANSFER_ISOCHRONOUS: - if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* ISO transactions require different PIDs depending on direction - and how many packets are needed */ - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { - if (pipe->multi_count < 2) /* Need DATA0 */ - USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0); - else /* Need MDATA */ - USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 3); - } - } - break; - } - { - cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))}; - transaction->xfersize = usbc_hctsiz.s.xfersize; - transaction->pktcnt = usbc_hctsiz.s.pktcnt; - } - /* Remeber when we start a split transaction */ - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - usb->active_split = transaction; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, chena, 1); - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - __cvmx_usb_fill_tx_fifo(usb, channel); - return; + cvmx_usb_transaction_t *transaction = pipe->head; + + /* Make sure all writes to the DMA region get flushed */ + CVMX_SYNCW; + + /* Attach the channel to the pipe */ + usb->pipe_for_channel[channel] = pipe; + pipe->channel = channel; + pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED; + + /* Mark this channel as in use */ + usb->idle_hardware_channels &= ~(1<index)); + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32); + + usbc_hcintmsk.u32 = 0; + usbc_hcintmsk.s.chhltdmsk = 1; + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { + /* Channels need these extra interrupts when we aren't in DMA mode */ + usbc_hcintmsk.s.datatglerrmsk = 1; + usbc_hcintmsk.s.frmovrunmsk = 1; + usbc_hcintmsk.s.bblerrmsk = 1; + usbc_hcintmsk.s.xacterrmsk = 1; + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + /* Splits don't generate xfercompl, so we need ACK and NYET */ + usbc_hcintmsk.s.nyetmsk = 1; + usbc_hcintmsk.s.ackmsk = 1; + } + usbc_hcintmsk.s.nakmsk = 1; + usbc_hcintmsk.s.stallmsk = 1; + usbc_hcintmsk.s.xfercomplmsk = 1; + } + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32); + + /* Enable the channel interrupt to propagate */ + usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index)); + usbc_haintmsk.s.haintmsk |= 1<index), usbc_haintmsk.u32); + } + + /* Setup the locations the DMA engines use */ + { + uint64_t dma_address = transaction->buffer + transaction->actual_bytes; + if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) + dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes; + __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address); + __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address); + } + + /* Setup both the size of the transfer and the SPLIT characteristics */ + { + cvmx_usbcx_hcspltx_t usbc_hcsplt = {.u32 = 0}; + cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = 0}; + int packets_to_transfer; + int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes; + + /* ISOCHRONOUS transactions store each individual transfer size in the + packet structure, not the global buffer_length */ + if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) + bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes; + + /* We need to do split transactions when we are talking to non high + speed devices that are behind a high speed hub */ + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + /* On the start split phase (stage is even) record the frame number we + will need to send the split complete. We only store the lower two bits + since the time ahead can only be two frames */ + if ((transaction->stage&1) == 0) { + if (transaction->type == CVMX_USB_TRANSFER_BULK) + pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f; + else + pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f; + } else + pipe->split_sc_frame = -1; + + usbc_hcsplt.s.spltena = 1; + usbc_hcsplt.s.hubaddr = pipe->hub_device_addr; + usbc_hcsplt.s.prtaddr = pipe->hub_port; + usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE); + + /* SPLIT transactions can only ever transmit one data packet so + limit the transfer size to the max packet size */ + if (bytes_to_transfer > pipe->max_packet) + bytes_to_transfer = pipe->max_packet; + + /* ISOCHRONOUS OUT splits are unique in that they limit + data transfers to 188 byte chunks representing the + begin/middle/end of the data or all */ + if (!usbc_hcsplt.s.compsplt && + (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && + (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { + /* Clear the split complete frame number as there isn't going + to be a split complete */ + pipe->split_sc_frame = -1; + /* See if we've started this transfer and sent data */ + if (transaction->actual_bytes == 0) { + /* Nothing sent yet, this is either a begin or the + entire payload */ + if (bytes_to_transfer <= 188) + usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */ + else + usbc_hcsplt.s.xactpos = 2; /* First part of payload */ + } else { + /* Continuing the previous data, we must either be + in the middle or at the end */ + if (bytes_to_transfer <= 188) + usbc_hcsplt.s.xactpos = 1; /* End of payload */ + else + usbc_hcsplt.s.xactpos = 0; /* Middle of payload */ + } + /* Again, the transfer size is limited to 188 bytes */ + if (bytes_to_transfer > 188) + bytes_to_transfer = 188; + } + } + + /* Make sure the transfer never exceeds the byte limit of the hardware. + Further bytes will be sent as continued transactions */ + if (bytes_to_transfer > MAX_TRANSFER_BYTES) { + /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ + bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; + bytes_to_transfer *= pipe->max_packet; + } + + /* Calculate the number of packets to transfer. If the length is zero + we still need to transfer one packet */ + packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; + if (packets_to_transfer == 0) + packets_to_transfer = 1; + else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { + /* Limit to one packet when not using DMA. Channels must be restarted + between every packet for IN transactions, so there is no reason to + do multiple packets in a row */ + packets_to_transfer = 1; + bytes_to_transfer = packets_to_transfer * pipe->max_packet; + } else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { + /* Limit the number of packet and data transferred to what the + hardware can handle */ + packets_to_transfer = MAX_TRANSFER_PACKETS; + bytes_to_transfer = packets_to_transfer * pipe->max_packet; + } + + usbc_hctsiz.s.xfersize = bytes_to_transfer; + usbc_hctsiz.s.pktcnt = packets_to_transfer; + + /* Update the DATA0/DATA1 toggle */ + usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); + /* High speed pipes may need a hardware ping before they start */ + if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING) + usbc_hctsiz.s.dopng = 1; + + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32); + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32); + } + + /* Setup the Host Channel Characteristics Register */ + { + cvmx_usbcx_hccharx_t usbc_hcchar = {.u32 = 0}; + + /* Set the startframe odd/even properly. This is only used for periodic */ + usbc_hcchar.s.oddfrm = usb->frame_number&1; + + /* Set the number of back to back packets allowed by this endpoint. + Split transactions interpret "ec" as the number of immediate + retries of failure. These retries happen too quickly, so we + disable these entirely for splits */ + if (__cvmx_usb_pipe_needs_split(usb, pipe)) + usbc_hcchar.s.ec = 1; + else if (pipe->multi_count < 1) + usbc_hcchar.s.ec = 1; + else if (pipe->multi_count > 3) + usbc_hcchar.s.ec = 3; + else + usbc_hcchar.s.ec = pipe->multi_count; + + /* Set the rest of the endpoint specific settings */ + usbc_hcchar.s.devaddr = pipe->device_addr; + usbc_hcchar.s.eptype = transaction->type; + usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW); + usbc_hcchar.s.epdir = pipe->transfer_dir; + usbc_hcchar.s.epnum = pipe->endpoint_num; + usbc_hcchar.s.mps = pipe->max_packet; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); + } + + /* Do transaction type specific fixups as needed */ + switch (transaction->type) { + case CVMX_USB_TRANSFER_CONTROL: + __cvmx_usb_start_channel_control(usb, channel, pipe); + break; + case CVMX_USB_TRANSFER_BULK: + case CVMX_USB_TRANSFER_INTERRUPT: + break; + case CVMX_USB_TRANSFER_ISOCHRONOUS: + if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { + /* ISO transactions require different PIDs depending on direction + and how many packets are needed */ + if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { + if (pipe->multi_count < 2) /* Need DATA0 */ + USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0); + else /* Need MDATA */ + USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 3); + } + } + break; + } + { + cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))}; + transaction->xfersize = usbc_hctsiz.s.xfersize; + transaction->pktcnt = usbc_hctsiz.s.pktcnt; + } + /* Remeber when we start a split transaction */ + if (__cvmx_usb_pipe_needs_split(usb, pipe)) + usb->active_split = transaction; + USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, chena, 1); + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) + __cvmx_usb_fill_tx_fifo(usb, channel); + return; } /** * @INTERNAL * Find a pipe that is ready to be scheduled to hardware. - * @param usb USB device state populated by - * cvmx_usb_initialize(). - * @param list Pipe list to search + * @param usb USB device state populated by + * cvmx_usb_initialize(). + * @param list Pipe list to search * @param current_frame - * Frame counter to use as a time reference. + * Frame counter to use as a time reference. * * @return Pipe or NULL if none are ready */ static cvmx_usb_pipe_t *__cvmx_usb_find_ready_pipe(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_list_t *list, uint64_t current_frame) { - cvmx_usb_pipe_t *pipe = list->head; - while (pipe) { - if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head && - (pipe->next_tx_frame <= current_frame) && - ((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) && - (!usb->active_split || (usb->active_split == pipe->head))) { - CVMX_PREFETCH(pipe, 128); - CVMX_PREFETCH(pipe->head, 0); - return pipe; - } - pipe = pipe->next; - } - return NULL; + cvmx_usb_pipe_t *pipe = list->head; + while (pipe) { + if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head && + (pipe->next_tx_frame <= current_frame) && + ((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) && + (!usb->active_split || (usb->active_split == pipe->head))) { + CVMX_PREFETCH(pipe, 128); + CVMX_PREFETCH(pipe->head, 0); + return pipe; + } + pipe = pipe->next; + } + return NULL; } @@ -1727,69 +1716,69 @@ static cvmx_usb_pipe_t *__cvmx_usb_find_ready_pipe(cvmx_usb_internal_state_t *us * Called whenever a pipe might need to be scheduled to the * hardware. * - * @param usb USB device state populated by - * cvmx_usb_initialize(). + * @param usb USB device state populated by + * cvmx_usb_initialize(). * @param is_sof True if this schedule was called on a SOF interrupt. */ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) { - int channel; - cvmx_usb_pipe_t *pipe; - int need_sof; - cvmx_usb_transfer_t ttype; - - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { - /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */ - cvmx_usbcx_hfnum_t hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))}; - cvmx_usbcx_hfir_t hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))}; - if (hfnum.s.frrem < hfir.s.frint/4) - goto done; - } - - while (usb->idle_hardware_channels) { - /* Find an idle channel */ - CVMX_CLZ(channel, usb->idle_hardware_channels); - channel = 31 - channel; - if (unlikely(channel > 7)) - break; - - /* Find a pipe needing service */ - pipe = NULL; - if (is_sof) { - /* Only process periodic pipes on SOF interrupts. This way we are - sure that the periodic data is sent in the beginning of the - frame */ - pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number); - if (likely(!pipe)) - pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number); - } - if (likely(!pipe)) { - pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number); - if (likely(!pipe)) - pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number); - } - if (!pipe) - break; - - __cvmx_usb_start_channel(usb, channel, pipe); - } + int channel; + cvmx_usb_pipe_t *pipe; + int need_sof; + cvmx_usb_transfer_t ttype; + + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { + /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */ + cvmx_usbcx_hfnum_t hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))}; + cvmx_usbcx_hfir_t hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))}; + if (hfnum.s.frrem < hfir.s.frint/4) + goto done; + } + + while (usb->idle_hardware_channels) { + /* Find an idle channel */ + CVMX_CLZ(channel, usb->idle_hardware_channels); + channel = 31 - channel; + if (unlikely(channel > 7)) + break; + + /* Find a pipe needing service */ + pipe = NULL; + if (is_sof) { + /* Only process periodic pipes on SOF interrupts. This way we are + sure that the periodic data is sent in the beginning of the + frame */ + pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number); + if (likely(!pipe)) + pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number); + } + if (likely(!pipe)) { + pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number); + if (likely(!pipe)) + pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number); + } + if (!pipe) + break; + + __cvmx_usb_start_channel(usb, channel, pipe); + } done: - /* Only enable SOF interrupts when we have transactions pending in the - future that might need to be scheduled */ - need_sof = 0; - for (ttype=CVMX_USB_TRANSFER_CONTROL; ttype<=CVMX_USB_TRANSFER_INTERRUPT; ttype++) { - pipe = usb->active_pipes[ttype].head; - while (pipe) { - if (pipe->next_tx_frame > usb->frame_number) { - need_sof = 1; - break; - } - pipe=pipe->next; - } - } - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, sofmsk, need_sof); - return; + /* Only enable SOF interrupts when we have transactions pending in the + future that might need to be scheduled */ + need_sof = 0; + for (ttype = CVMX_USB_TRANSFER_CONTROL; ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) { + pipe = usb->active_pipes[ttype].head; + while (pipe) { + if (pipe->next_tx_frame > usb->frame_number) { + need_sof = 1; + break; + } + pipe = pipe->next; + } + } + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, sofmsk, need_sof); + return; } @@ -1797,45 +1786,45 @@ done: * @INTERNAL * Call a user's callback for a specific reason. * - * @param usb USB device state populated by - * cvmx_usb_initialize(). - * @param pipe Pipe the callback is for or NULL + * @param usb USB device state populated by + * cvmx_usb_initialize(). + * @param pipe Pipe the callback is for or NULL * @param transaction - * Transaction the callback is for or NULL + * Transaction the callback is for or NULL * @param reason Reason this callback is being called * @param complete_code - * Completion code for the transaction, if any + * Completion code for the transaction, if any */ static void __cvmx_usb_perform_callback(cvmx_usb_internal_state_t *usb, - cvmx_usb_pipe_t *pipe, - cvmx_usb_transaction_t *transaction, - cvmx_usb_callback_t reason, - cvmx_usb_complete_t complete_code) + cvmx_usb_pipe_t *pipe, + cvmx_usb_transaction_t *transaction, + cvmx_usb_callback_t reason, + cvmx_usb_complete_t complete_code) { - cvmx_usb_callback_func_t callback = usb->callback[reason]; - void *user_data = usb->callback_data[reason]; - int submit_handle = -1; - int pipe_handle = -1; - int bytes_transferred = 0; - - if (pipe) - pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe); - - if (transaction) { - submit_handle = __cvmx_usb_get_submit_handle(usb, transaction); - bytes_transferred = transaction->actual_bytes; - /* Transactions are allowed to override the default callback */ - if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) { - callback = transaction->callback; - user_data = transaction->callback_data; - } - } - - if (!callback) - return; - - callback((cvmx_usb_state_t *)usb, reason, complete_code, pipe_handle, submit_handle, - bytes_transferred, user_data); + cvmx_usb_callback_func_t callback = usb->callback[reason]; + void *user_data = usb->callback_data[reason]; + int submit_handle = -1; + int pipe_handle = -1; + int bytes_transferred = 0; + + if (pipe) + pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe); + + if (transaction) { + submit_handle = __cvmx_usb_get_submit_handle(usb, transaction); + bytes_transferred = transaction->actual_bytes; + /* Transactions are allowed to override the default callback */ + if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) { + callback = transaction->callback; + user_data = transaction->callback_data; + } + } + + if (!callback) + return; + + callback((cvmx_usb_state_t *)usb, reason, complete_code, pipe_handle, submit_handle, + bytes_transferred, user_data); } @@ -1844,61 +1833,61 @@ static void __cvmx_usb_perform_callback(cvmx_usb_internal_state_t *usb, * Signal the completion of a transaction and free it. The * transaction will be removed from the pipe transaction list. * - * @param usb USB device state populated by - * cvmx_usb_initialize(). - * @param pipe Pipe the transaction is on + * @param usb USB device state populated by + * cvmx_usb_initialize(). + * @param pipe Pipe the transaction is on * @param transaction - * Transaction that completed + * Transaction that completed * @param complete_code - * Completion code + * Completion code */ -static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t * usb, - cvmx_usb_pipe_t *pipe, - cvmx_usb_transaction_t *transaction, - cvmx_usb_complete_t complete_code) +static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t *usb, + cvmx_usb_pipe_t *pipe, + cvmx_usb_transaction_t *transaction, + cvmx_usb_complete_t complete_code) { - /* If this was a split then clear our split in progress marker */ - if (usb->active_split == transaction) - usb->active_split = NULL; - - /* Isochronous transactions need extra processing as they might not be done - after a single data transfer */ - if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { - /* Update the number of bytes transferred in this ISO packet */ - transaction->iso_packets[0].length = transaction->actual_bytes; - transaction->iso_packets[0].status = complete_code; - - /* If there are more ISOs pending and we succeeded, schedule the next - one */ - if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) { - transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */ - transaction->iso_number_packets--; /* One less ISO waiting to transfer */ - transaction->iso_packets++; /* Increment to the next location in our packet array */ - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - goto done; - } - } - - /* Remove the transaction from the pipe list */ - if (transaction->next) - transaction->next->prev = transaction->prev; - else - pipe->tail = transaction->prev; - if (transaction->prev) - transaction->prev->next = transaction->next; - else - pipe->head = transaction->next; - if (!pipe->head) { - __cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe); - __cvmx_usb_append_pipe(&usb->idle_pipes, pipe); - - } - __cvmx_usb_perform_callback(usb, pipe, transaction, - CVMX_USB_CALLBACK_TRANSFER_COMPLETE, - complete_code); - __cvmx_usb_free_transaction(usb, transaction); + /* If this was a split then clear our split in progress marker */ + if (usb->active_split == transaction) + usb->active_split = NULL; + + /* Isochronous transactions need extra processing as they might not be done + after a single data transfer */ + if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { + /* Update the number of bytes transferred in this ISO packet */ + transaction->iso_packets[0].length = transaction->actual_bytes; + transaction->iso_packets[0].status = complete_code; + + /* If there are more ISOs pending and we succeeded, schedule the next + one */ + if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) { + transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */ + transaction->iso_number_packets--; /* One less ISO waiting to transfer */ + transaction->iso_packets++; /* Increment to the next location in our packet array */ + transaction->stage = CVMX_USB_STAGE_NON_CONTROL; + goto done; + } + } + + /* Remove the transaction from the pipe list */ + if (transaction->next) + transaction->next->prev = transaction->prev; + else + pipe->tail = transaction->prev; + if (transaction->prev) + transaction->prev->next = transaction->next; + else + pipe->head = transaction->next; + if (!pipe->head) { + __cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe); + __cvmx_usb_append_pipe(&usb->idle_pipes, pipe); + + } + __cvmx_usb_perform_callback(usb, pipe, transaction, + CVMX_USB_CALLBACK_TRANSFER_COMPLETE, + complete_code); + __cvmx_usb_free_transaction(usb, transaction); done: - return; + return; } @@ -1909,365 +1898,364 @@ done: * * @param usb * @param pipe_handle - * Which pipe to submit to. Will be validated in this function. - * @param type Transaction type - * @param flags Flags for the transaction + * Which pipe to submit to. Will be validated in this function. + * @param type Transaction type + * @param flags Flags for the transaction * @param buffer User buffer for the transaction * @param buffer_length - * User buffer's length in bytes + * User buffer's length in bytes * @param control_header - * For control transactions, the 8 byte standard header + * For control transactions, the 8 byte standard header * @param iso_start_frame - * For ISO transactions, the start frame + * For ISO transactions, the start frame * @param iso_number_packets - * For ISO, the number of packet in the transaction. + * For ISO, the number of packet in the transaction. * @param iso_packets - * A description of each ISO packet + * A description of each ISO packet * @param callback User callback to call when the transaction completes * @param user_data User's data for the callback * * @return Submit handle or negative on failure. Matches the result - * in the external API. + * in the external API. */ static int __cvmx_usb_submit_transaction(cvmx_usb_internal_state_t *usb, - int pipe_handle, - cvmx_usb_transfer_t type, - int flags, - uint64_t buffer, - int buffer_length, - uint64_t control_header, - int iso_start_frame, - int iso_number_packets, - cvmx_usb_iso_packet_t *iso_packets, - cvmx_usb_callback_func_t callback, - void *user_data) + int pipe_handle, + cvmx_usb_transfer_t type, + int flags, + uint64_t buffer, + int buffer_length, + uint64_t control_header, + int iso_start_frame, + int iso_number_packets, + cvmx_usb_iso_packet_t *iso_packets, + cvmx_usb_callback_func_t callback, + void *user_data) { - int submit_handle; - cvmx_usb_transaction_t *transaction; - cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; - - if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) - return -EINVAL; - /* Fail if the pipe isn't open */ - if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) - return -EINVAL; - if (unlikely(pipe->transfer_type != type)) - return -EINVAL; - - transaction = __cvmx_usb_alloc_transaction(usb); - if (unlikely(!transaction)) - return -ENOMEM; - - transaction->type = type; - transaction->flags |= flags; - transaction->buffer = buffer; - transaction->buffer_length = buffer_length; - transaction->control_header = control_header; - transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it - transaction->iso_number_packets = iso_number_packets; - transaction->iso_packets = iso_packets; - transaction->callback = callback; - transaction->callback_data = user_data; - if (transaction->type == CVMX_USB_TRANSFER_CONTROL) - transaction->stage = CVMX_USB_STAGE_SETUP; - else - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - - transaction->next = NULL; - if (pipe->tail) { - transaction->prev = pipe->tail; - transaction->prev->next = transaction; - } - else { - if (pipe->next_tx_frame < usb->frame_number) - pipe->next_tx_frame = usb->frame_number + pipe->interval - - (usb->frame_number - pipe->next_tx_frame) % pipe->interval; - transaction->prev = NULL; - pipe->head = transaction; - __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe); - __cvmx_usb_append_pipe(usb->active_pipes + pipe->transfer_type, pipe); - } - pipe->tail = transaction; - - submit_handle = __cvmx_usb_get_submit_handle(usb, transaction); - - /* We may need to schedule the pipe if this was the head of the pipe */ - if (!transaction->prev) - __cvmx_usb_schedule(usb, 0); - - return submit_handle; + int submit_handle; + cvmx_usb_transaction_t *transaction; + cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; + + if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) + return -EINVAL; + /* Fail if the pipe isn't open */ + if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) + return -EINVAL; + if (unlikely(pipe->transfer_type != type)) + return -EINVAL; + + transaction = __cvmx_usb_alloc_transaction(usb); + if (unlikely(!transaction)) + return -ENOMEM; + + transaction->type = type; + transaction->flags |= flags; + transaction->buffer = buffer; + transaction->buffer_length = buffer_length; + transaction->control_header = control_header; + transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it + transaction->iso_number_packets = iso_number_packets; + transaction->iso_packets = iso_packets; + transaction->callback = callback; + transaction->callback_data = user_data; + if (transaction->type == CVMX_USB_TRANSFER_CONTROL) + transaction->stage = CVMX_USB_STAGE_SETUP; + else + transaction->stage = CVMX_USB_STAGE_NON_CONTROL; + + transaction->next = NULL; + if (pipe->tail) { + transaction->prev = pipe->tail; + transaction->prev->next = transaction; + } else { + if (pipe->next_tx_frame < usb->frame_number) + pipe->next_tx_frame = usb->frame_number + pipe->interval - + (usb->frame_number - pipe->next_tx_frame) % pipe->interval; + transaction->prev = NULL; + pipe->head = transaction; + __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe); + __cvmx_usb_append_pipe(usb->active_pipes + pipe->transfer_type, pipe); + } + pipe->tail = transaction; + + submit_handle = __cvmx_usb_get_submit_handle(usb, transaction); + + /* We may need to schedule the pipe if this was the head of the pipe */ + if (!transaction->prev) + __cvmx_usb_schedule(usb, 0); + + return submit_handle; } /** * Call to submit a USB Bulk transfer to a pipe. * - * @param state USB device state populated by - * cvmx_usb_initialize(). + * @param state USB device state populated by + * cvmx_usb_initialize(). * @param pipe_handle - * Handle to the pipe for the transfer. + * Handle to the pipe for the transfer. * @param buffer Physical address of the data buffer in - * memory. Note that this is NOT A POINTER, but - * the full 64bit physical address of the - * buffer. This may be zero if buffer_length is - * zero. + * memory. Note that this is NOT A POINTER, but + * the full 64bit physical address of the + * buffer. This may be zero if buffer_length is + * zero. * @param buffer_length - * Length of buffer in bytes. + * Length of buffer in bytes. * @param callback Function to call when this transaction - * completes. If the return value of this - * function isn't an error, then this function - * is guaranteed to be called when the - * transaction completes. If this parameter is - * NULL, then the generic callback registered - * through cvmx_usb_register_callback is - * called. If both are NULL, then there is no - * way to know when a transaction completes. + * completes. If the return value of this + * function isn't an error, then this function + * is guaranteed to be called when the + * transaction completes. If this parameter is + * NULL, then the generic callback registered + * through cvmx_usb_register_callback is + * called. If both are NULL, then there is no + * way to know when a transaction completes. * @param user_data User supplied data returned when the - * callback is called. This is only used if - * callback in not NULL. + * callback is called. This is only used if + * callback in not NULL. * * @return A submitted transaction handle or negative on - * failure. Negative values are error codes. + * failure. Negative values are error codes. */ int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle, - uint64_t buffer, int buffer_length, - cvmx_usb_callback_func_t callback, - void *user_data) + uint64_t buffer, int buffer_length, + cvmx_usb_callback_func_t callback, + void *user_data) { - int submit_handle; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - /* Pipe handle checking is done later in a common place */ - if (unlikely(!buffer)) - return -EINVAL; - if (unlikely(buffer_length < 0)) - return -EINVAL; - - submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, - CVMX_USB_TRANSFER_BULK, - 0, /* flags */ - buffer, - buffer_length, - 0, /* control_header */ - 0, /* iso_start_frame */ - 0, /* iso_number_packets */ - NULL, /* iso_packets */ - callback, - user_data); - return submit_handle; + int submit_handle; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + /* Pipe handle checking is done later in a common place */ + if (unlikely(!buffer)) + return -EINVAL; + if (unlikely(buffer_length < 0)) + return -EINVAL; + + submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, + CVMX_USB_TRANSFER_BULK, + 0, /* flags */ + buffer, + buffer_length, + 0, /* control_header */ + 0, /* iso_start_frame */ + 0, /* iso_number_packets */ + NULL, /* iso_packets */ + callback, + user_data); + return submit_handle; } /** * Call to submit a USB Interrupt transfer to a pipe. * - * @param state USB device state populated by - * cvmx_usb_initialize(). + * @param state USB device state populated by + * cvmx_usb_initialize(). * @param pipe_handle - * Handle to the pipe for the transfer. + * Handle to the pipe for the transfer. * @param buffer Physical address of the data buffer in - * memory. Note that this is NOT A POINTER, but - * the full 64bit physical address of the - * buffer. This may be zero if buffer_length is - * zero. + * memory. Note that this is NOT A POINTER, but + * the full 64bit physical address of the + * buffer. This may be zero if buffer_length is + * zero. * @param buffer_length - * Length of buffer in bytes. + * Length of buffer in bytes. * @param callback Function to call when this transaction - * completes. If the return value of this - * function isn't an error, then this function - * is guaranteed to be called when the - * transaction completes. If this parameter is - * NULL, then the generic callback registered - * through cvmx_usb_register_callback is - * called. If both are NULL, then there is no - * way to know when a transaction completes. + * completes. If the return value of this + * function isn't an error, then this function + * is guaranteed to be called when the + * transaction completes. If this parameter is + * NULL, then the generic callback registered + * through cvmx_usb_register_callback is + * called. If both are NULL, then there is no + * way to know when a transaction completes. * @param user_data User supplied data returned when the - * callback is called. This is only used if - * callback in not NULL. + * callback is called. This is only used if + * callback in not NULL. * * @return A submitted transaction handle or negative on - * failure. Negative values are error codes. + * failure. Negative values are error codes. */ int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle, - uint64_t buffer, int buffer_length, - cvmx_usb_callback_func_t callback, - void *user_data) + uint64_t buffer, int buffer_length, + cvmx_usb_callback_func_t callback, + void *user_data) { - int submit_handle; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - /* Pipe handle checking is done later in a common place */ - if (unlikely(!buffer)) - return -EINVAL; - if (unlikely(buffer_length < 0)) - return -EINVAL; - - submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, - CVMX_USB_TRANSFER_INTERRUPT, - 0, /* flags */ - buffer, - buffer_length, - 0, /* control_header */ - 0, /* iso_start_frame */ - 0, /* iso_number_packets */ - NULL, /* iso_packets */ - callback, - user_data); - return submit_handle; + int submit_handle; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + /* Pipe handle checking is done later in a common place */ + if (unlikely(!buffer)) + return -EINVAL; + if (unlikely(buffer_length < 0)) + return -EINVAL; + + submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, + CVMX_USB_TRANSFER_INTERRUPT, + 0, /* flags */ + buffer, + buffer_length, + 0, /* control_header */ + 0, /* iso_start_frame */ + 0, /* iso_number_packets */ + NULL, /* iso_packets */ + callback, + user_data); + return submit_handle; } /** * Call to submit a USB Control transfer to a pipe. * - * @param state USB device state populated by - * cvmx_usb_initialize(). + * @param state USB device state populated by + * cvmx_usb_initialize(). * @param pipe_handle - * Handle to the pipe for the transfer. + * Handle to the pipe for the transfer. * @param control_header - * USB 8 byte control header physical address. - * Note that this is NOT A POINTER, but the - * full 64bit physical address of the buffer. + * USB 8 byte control header physical address. + * Note that this is NOT A POINTER, but the + * full 64bit physical address of the buffer. * @param buffer Physical address of the data buffer in - * memory. Note that this is NOT A POINTER, but - * the full 64bit physical address of the - * buffer. This may be zero if buffer_length is - * zero. + * memory. Note that this is NOT A POINTER, but + * the full 64bit physical address of the + * buffer. This may be zero if buffer_length is + * zero. * @param buffer_length - * Length of buffer in bytes. + * Length of buffer in bytes. * @param callback Function to call when this transaction - * completes. If the return value of this - * function isn't an error, then this function - * is guaranteed to be called when the - * transaction completes. If this parameter is - * NULL, then the generic callback registered - * through cvmx_usb_register_callback is - * called. If both are NULL, then there is no - * way to know when a transaction completes. + * completes. If the return value of this + * function isn't an error, then this function + * is guaranteed to be called when the + * transaction completes. If this parameter is + * NULL, then the generic callback registered + * through cvmx_usb_register_callback is + * called. If both are NULL, then there is no + * way to know when a transaction completes. * @param user_data User supplied data returned when the - * callback is called. This is only used if - * callback in not NULL. + * callback is called. This is only used if + * callback in not NULL. * * @return A submitted transaction handle or negative on - * failure. Negative values are error codes. + * failure. Negative values are error codes. */ int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle, - uint64_t control_header, - uint64_t buffer, int buffer_length, - cvmx_usb_callback_func_t callback, - void *user_data) + uint64_t control_header, + uint64_t buffer, int buffer_length, + cvmx_usb_callback_func_t callback, + void *user_data) { - int submit_handle; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(control_header); - - /* Pipe handle checking is done later in a common place */ - if (unlikely(!control_header)) - return -EINVAL; - /* Some drivers send a buffer with a zero length. God only knows why */ - if (unlikely(buffer && (buffer_length < 0))) - return -EINVAL; - if (unlikely(!buffer && (buffer_length != 0))) - return -EINVAL; - if ((header->s.request_type & 0x80) == 0) - buffer_length = le16_to_cpu(header->s.length); - - submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, - CVMX_USB_TRANSFER_CONTROL, - 0, /* flags */ - buffer, - buffer_length, - control_header, - 0, /* iso_start_frame */ - 0, /* iso_number_packets */ - NULL, /* iso_packets */ - callback, - user_data); - return submit_handle; + int submit_handle; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(control_header); + + /* Pipe handle checking is done later in a common place */ + if (unlikely(!control_header)) + return -EINVAL; + /* Some drivers send a buffer with a zero length. God only knows why */ + if (unlikely(buffer && (buffer_length < 0))) + return -EINVAL; + if (unlikely(!buffer && (buffer_length != 0))) + return -EINVAL; + if ((header->s.request_type & 0x80) == 0) + buffer_length = le16_to_cpu(header->s.length); + + submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, + CVMX_USB_TRANSFER_CONTROL, + 0, /* flags */ + buffer, + buffer_length, + control_header, + 0, /* iso_start_frame */ + 0, /* iso_number_packets */ + NULL, /* iso_packets */ + callback, + user_data); + return submit_handle; } /** * Call to submit a USB Isochronous transfer to a pipe. * - * @param state USB device state populated by - * cvmx_usb_initialize(). + * @param state USB device state populated by + * cvmx_usb_initialize(). * @param pipe_handle - * Handle to the pipe for the transfer. + * Handle to the pipe for the transfer. * @param start_frame - * Number of frames into the future to schedule - * this transaction. - * @param flags Flags to control the transfer. See - * cvmx_usb_isochronous_flags_t for the flag - * definitions. + * Number of frames into the future to schedule + * this transaction. + * @param flags Flags to control the transfer. See + * cvmx_usb_isochronous_flags_t for the flag + * definitions. * @param number_packets - * Number of sequential packets to transfer. - * "packets" is a pointer to an array of this - * many packet structures. + * Number of sequential packets to transfer. + * "packets" is a pointer to an array of this + * many packet structures. * @param packets Description of each transfer packet as - * defined by cvmx_usb_iso_packet_t. The array - * pointed to here must stay valid until the - * complete callback is called. + * defined by cvmx_usb_iso_packet_t. The array + * pointed to here must stay valid until the + * complete callback is called. * @param buffer Physical address of the data buffer in - * memory. Note that this is NOT A POINTER, but - * the full 64bit physical address of the - * buffer. This may be zero if buffer_length is - * zero. + * memory. Note that this is NOT A POINTER, but + * the full 64bit physical address of the + * buffer. This may be zero if buffer_length is + * zero. * @param buffer_length - * Length of buffer in bytes. + * Length of buffer in bytes. * @param callback Function to call when this transaction - * completes. If the return value of this - * function isn't an error, then this function - * is guaranteed to be called when the - * transaction completes. If this parameter is - * NULL, then the generic callback registered - * through cvmx_usb_register_callback is - * called. If both are NULL, then there is no - * way to know when a transaction completes. + * completes. If the return value of this + * function isn't an error, then this function + * is guaranteed to be called when the + * transaction completes. If this parameter is + * NULL, then the generic callback registered + * through cvmx_usb_register_callback is + * called. If both are NULL, then there is no + * way to know when a transaction completes. * @param user_data User supplied data returned when the - * callback is called. This is only used if - * callback in not NULL. + * callback is called. This is only used if + * callback in not NULL. * * @return A submitted transaction handle or negative on - * failure. Negative values are error codes. + * failure. Negative values are error codes. */ int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle, - int start_frame, int flags, - int number_packets, - cvmx_usb_iso_packet_t packets[], - uint64_t buffer, int buffer_length, - cvmx_usb_callback_func_t callback, - void *user_data) + int start_frame, int flags, + int number_packets, + cvmx_usb_iso_packet_t packets[], + uint64_t buffer, int buffer_length, + cvmx_usb_callback_func_t callback, + void *user_data) { - int submit_handle; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - /* Pipe handle checking is done later in a common place */ - if (unlikely(start_frame < 0)) - return -EINVAL; - if (unlikely(flags & ~(CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT | CVMX_USB_ISOCHRONOUS_FLAGS_ASAP))) - return -EINVAL; - if (unlikely(number_packets < 1)) - return -EINVAL; - if (unlikely(!packets)) - return -EINVAL; - if (unlikely(!buffer)) - return -EINVAL; - if (unlikely(buffer_length < 0)) - return -EINVAL; - - submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, - CVMX_USB_TRANSFER_ISOCHRONOUS, - flags, - buffer, - buffer_length, - 0, /* control_header */ - start_frame, - number_packets, - packets, - callback, - user_data); - return submit_handle; + int submit_handle; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + + /* Pipe handle checking is done later in a common place */ + if (unlikely(start_frame < 0)) + return -EINVAL; + if (unlikely(flags & ~(CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT | CVMX_USB_ISOCHRONOUS_FLAGS_ASAP))) + return -EINVAL; + if (unlikely(number_packets < 1)) + return -EINVAL; + if (unlikely(!packets)) + return -EINVAL; + if (unlikely(!buffer)) + return -EINVAL; + if (unlikely(buffer_length < 0)) + return -EINVAL; + + submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle, + CVMX_USB_TRANSFER_ISOCHRONOUS, + flags, + buffer, + buffer_length, + 0, /* control_header */ + start_frame, + number_packets, + packets, + callback, + user_data); + return submit_handle; } @@ -2279,55 +2267,55 @@ int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle, * associated callback. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * @param pipe_handle - * Pipe handle to cancel requests in. + * Pipe handle to cancel requests in. * @param submit_handle - * Handle to transaction to cancel, returned by the submit function. + * Handle to transaction to cancel, returned by the submit function. * * @return 0 or a negative error code. */ int cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle, int submit_handle) { - cvmx_usb_transaction_t *transaction; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; - - if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) - return -EINVAL; - if (unlikely((submit_handle < 0) || (submit_handle >= MAX_TRANSACTIONS))) - return -EINVAL; - - /* Fail if the pipe isn't open */ - if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) - return -EINVAL; - - transaction = usb->transaction + submit_handle; - - /* Fail if this transaction already completed */ - if (unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0)) - return -EINVAL; - - /* If the transaction is the HEAD of the queue and scheduled. We need to - treat it special */ - if ((pipe->head == transaction) && - (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) { - cvmx_usbcx_hccharx_t usbc_hcchar; - - usb->pipe_for_channel[pipe->channel] = NULL; - pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED; - - CVMX_SYNCW; - - usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index)); - /* If the channel isn't enabled then the transaction already completed */ - if (usbc_hcchar.s.chena) { - usbc_hcchar.s.chdis = 1; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32); - } - } - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL); - return 0; + cvmx_usb_transaction_t *transaction; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; + + if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) + return -EINVAL; + if (unlikely((submit_handle < 0) || (submit_handle >= MAX_TRANSACTIONS))) + return -EINVAL; + + /* Fail if the pipe isn't open */ + if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) + return -EINVAL; + + transaction = usb->transaction + submit_handle; + + /* Fail if this transaction already completed */ + if (unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0)) + return -EINVAL; + + /* If the transaction is the HEAD of the queue and scheduled. We need to + treat it special */ + if ((pipe->head == transaction) && + (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) { + cvmx_usbcx_hccharx_t usbc_hcchar; + + usb->pipe_for_channel[pipe->channel] = NULL; + pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED; + + CVMX_SYNCW; + + usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index)); + /* If the channel isn't enabled then the transaction already completed */ + if (usbc_hcchar.s.chena) { + usbc_hcchar.s.chdis = 1; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32); + } + } + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL); + return 0; } @@ -2336,32 +2324,32 @@ int cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle, int submit_handle) * does is call cvmx_usb_cancel() in a loop. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * @param pipe_handle - * Pipe handle to cancel requests in. + * Pipe handle to cancel requests in. * * @return 0 or a negative error code. */ int cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle) { - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; - - if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) - return -EINVAL; - - /* Fail if the pipe isn't open */ - if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) - return -EINVAL; - - /* Simply loop through and attempt to cancel each transaction */ - while (pipe->head) { - int result = cvmx_usb_cancel(state, pipe_handle, - __cvmx_usb_get_submit_handle(usb, pipe->head)); - if (unlikely(result != 0)) - return result; - } - return 0; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; + + if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) + return -EINVAL; + + /* Fail if the pipe isn't open */ + if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) + return -EINVAL; + + /* Simply loop through and attempt to cancel each transaction */ + while (pipe->head) { + int result = cvmx_usb_cancel(state, pipe_handle, + __cvmx_usb_get_submit_handle(usb, pipe->head)); + if (unlikely(result != 0)) + return result; + } + return 0; } @@ -2369,42 +2357,42 @@ int cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle) * Close a pipe created with cvmx_usb_open_pipe(). * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * @param pipe_handle - * Pipe handle to close. + * Pipe handle to close. * * @return 0 or a negative error code. EBUSY is returned if the pipe has * outstanding transfers. */ int cvmx_usb_close_pipe(cvmx_usb_state_t *state, int pipe_handle) { - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle; - if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) - return -EINVAL; + if (unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES))) + return -EINVAL; - /* Fail if the pipe isn't open */ - if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) - return -EINVAL; + /* Fail if the pipe isn't open */ + if (unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0)) + return -EINVAL; - /* Fail if the pipe has pending transactions */ - if (unlikely(pipe->head)) - return -EBUSY; + /* Fail if the pipe has pending transactions */ + if (unlikely(pipe->head)) + return -EBUSY; - pipe->flags = 0; - __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe); - __cvmx_usb_append_pipe(&usb->free_pipes, pipe); + pipe->flags = 0; + __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe); + __cvmx_usb_append_pipe(&usb->free_pipes, pipe); - return 0; + return 0; } /** * Register a function to be called when various USB events occur. * - * @param state USB device state populated by - * cvmx_usb_initialize(). + * @param state USB device state populated by + * cvmx_usb_initialize(). * @param reason Which event to register for. * @param callback Function to call when the event occurs. * @param user_data User data parameter to the function. @@ -2416,17 +2404,17 @@ int cvmx_usb_register_callback(cvmx_usb_state_t *state, cvmx_usb_callback_func_t callback, void *user_data) { - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; - if (unlikely(reason >= __CVMX_USB_CALLBACK_END)) - return -EINVAL; - if (unlikely(!callback)) - return -EINVAL; + if (unlikely(reason >= __CVMX_USB_CALLBACK_END)) + return -EINVAL; + if (unlikely(!callback)) + return -EINVAL; - usb->callback[reason] = callback; - usb->callback_data[reason] = user_data; + usb->callback[reason] = callback; + usb->callback_data[reason] = user_data; - return 0; + return 0; } @@ -2435,20 +2423,20 @@ int cvmx_usb_register_callback(cvmx_usb_state_t *state, * number is always in the range of 0-0x7ff. * * @param state USB device state populated by - * cvmx_usb_initialize(). + * cvmx_usb_initialize(). * * @return USB frame number */ int cvmx_usb_get_frame_number(cvmx_usb_state_t *state) { - int frame_number; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - cvmx_usbcx_hfnum_t usbc_hfnum; + int frame_number; + cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t *)state; + cvmx_usbcx_hfnum_t usbc_hfnum; - usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index)); - frame_number = usbc_hfnum.s.frnum; + usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index)); + frame_number = usbc_hfnum.s.frnum; - return frame_number; + return frame_number; } @@ -2456,391 +2444,365 @@ int cvmx_usb_get_frame_number(cvmx_usb_state_t *state) * @INTERNAL * Poll a channel for status * - * @param usb USB device + * @param usb USB device * @param channel Channel to poll * * @return Zero on success */ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) { - cvmx_usbcx_hcintx_t usbc_hcint; - cvmx_usbcx_hctsizx_t usbc_hctsiz; - cvmx_usbcx_hccharx_t usbc_hcchar; - cvmx_usb_pipe_t *pipe; - cvmx_usb_transaction_t *transaction; - int bytes_this_transfer; - int bytes_in_last_packet; - int packets_processed; - int buffer_space_left; - - /* Read the interrupt status bits for the channel */ - usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index)); - - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { - usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); - - if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) { - /* There seems to be a bug in CN31XX which can cause interrupt - IN transfers to get stuck until we do a write of HCCHARX - without changing things */ - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); - return 0; - } - - /* In non DMA mode the channels don't halt themselves. We need to - manually disable channels that are left running */ - if (!usbc_hcint.s.chhltd) { - if (usbc_hcchar.s.chena) { - cvmx_usbcx_hcintmskx_t hcintmsk; - /* Disable all interrupts except CHHLTD */ - hcintmsk.u32 = 0; - hcintmsk.s.chhltdmsk = 1; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32); - usbc_hcchar.s.chdis = 1; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); - return 0; - } - else if (usbc_hcint.s.xfercompl) { - /* Successful IN/OUT with transfer complete. Channel halt isn't needed */ - } - else { - cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel); - return 0; - } - } - } - else { - /* There is are no interrupts that we need to process when the channel is - still running */ - if (!usbc_hcint.s.chhltd) - return 0; - } - - /* Disable the channel interrupts now that it is done */ - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0); - usb->idle_hardware_channels |= (1<pipe_for_channel[channel]; - CVMX_PREFETCH(pipe, 0); - CVMX_PREFETCH(pipe, 128); - if (!pipe) - return 0; - transaction = pipe->head; - CVMX_PREFETCH0(transaction); - - /* Disconnect this pipe from the HW channel. Later the schedule function will - figure out which pipe needs to go */ - usb->pipe_for_channel[channel] = NULL; - pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED; - - /* Read the channel config info so we can figure out how much data - transfered */ - usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); - usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); - - /* Calculating the number of bytes successfully transferred is dependent on - the transfer direction */ - packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt; - if (usbc_hcchar.s.epdir) { - /* IN transactions are easy. For every byte received the hardware - decrements xfersize. All we need to do is subtract the current - value of xfersize from its starting value and we know how many - bytes were written to the buffer */ - bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize; - } - else { - /* OUT transaction don't decrement xfersize. Instead pktcnt is - decremented on every successful packet send. The hardware does - this when it receives an ACK, or NYET. If it doesn't - receive one of these responses pktcnt doesn't change */ - bytes_this_transfer = packets_processed * usbc_hcchar.s.mps; - /* The last packet may not be a full transfer if we didn't have - enough data */ - if (bytes_this_transfer > transaction->xfersize) - bytes_this_transfer = transaction->xfersize; - } - /* Figure out how many bytes were in the last packet of the transfer */ - if (packets_processed) - bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps; - else - bytes_in_last_packet = bytes_this_transfer; - - /* As a special case, setup transactions output the setup header, not - the user's data. For this reason we don't count setup data as bytes - transferred */ - if ((transaction->stage == CVMX_USB_STAGE_SETUP) || - (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE)) - bytes_this_transfer = 0; - - /* Add the bytes transferred to the running total. It is important that - bytes_this_transfer doesn't count any data that needs to be - retransmitted */ - transaction->actual_bytes += bytes_this_transfer; - if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) - buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes; - else - buffer_space_left = transaction->buffer_length - transaction->actual_bytes; - - /* We need to remember the PID toggle state for the next transaction. The - hardware already updated it for the next transaction */ - pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0); - - /* For high speed bulk out, assume the next transaction will need to do a - ping before proceeding. If this isn't true the ACK processing below - will clear this flag */ - if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && - (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && - (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)) - pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; - - if (usbc_hcint.s.stall) { - /* STALL as a response means this transaction cannot be completed - because the device can't process transactions. Tell the user. Any - data that was transferred will be counted on the actual bytes - transferred */ - pipe->pid_toggle = 0; - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL); - } - else if (usbc_hcint.s.xacterr) { - /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */ - if (usbc_hcint.s.nak || usbc_hcint.s.ack) - transaction->retries = 0; - transaction->retries++; - if (transaction->retries > MAX_RETRIES) { - /* XactErr as a response means the device signaled something wrong with - the transfer. For example, PID toggle errors cause these */ - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR); - } - else { - /* If this was a split then clear our split in progress marker */ - if (usb->active_split == transaction) - usb->active_split = NULL; - /* Rewind to the beginning of the transaction by anding off the - split complete bit */ - transaction->stage &= ~1; - pipe->split_sc_frame = -1; - pipe->next_tx_frame += pipe->interval; - if (pipe->next_tx_frame < usb->frame_number) - pipe->next_tx_frame = usb->frame_number + pipe->interval - - (usb->frame_number - pipe->next_tx_frame) % pipe->interval; - } - } - else if (usbc_hcint.s.bblerr) - { - /* Babble Error (BblErr) */ - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR); - } - else if (usbc_hcint.s.datatglerr) - { - /* We'll retry the exact same transaction again */ - transaction->retries++; - } - else if (usbc_hcint.s.nyet) { - /* NYET as a response is only allowed in three cases: as a response to - a ping, as a response to a split transaction, and as a response to - a bulk out. The ping case is handled by hardware, so we only have - splits and bulk out */ - if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { - transaction->retries = 0; - /* If there is more data to go then we need to try again. Otherwise - this transaction is complete */ - if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - } - else { - /* Split transactions retry the split complete 4 times then rewind - to the start split and do the entire transactions again */ - transaction->retries++; - if ((transaction->retries & 0x3) == 0) { - /* Rewind to the beginning of the transaction by anding off the - split complete bit */ - transaction->stage &= ~1; - pipe->split_sc_frame = -1; - } - } - } - else if (usbc_hcint.s.ack) { - transaction->retries = 0; - /* The ACK bit can only be checked after the other error bits. This is - because a multi packet transfer may succeed in a number of packets - and then get a different response on the last packet. In this case - both ACK and the last response bit will be set. If none of the - other response bits is set, then the last packet must have been an - ACK */ - - /* Since we got an ACK, we know we don't need to do a ping on this - pipe */ - pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING; - - switch (transaction->type) - { - case CVMX_USB_TRANSFER_CONTROL: - switch (transaction->stage) - { - case CVMX_USB_STAGE_NON_CONTROL: - case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE: - /* This should be impossible */ - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR); - break; - case CVMX_USB_STAGE_SETUP: - pipe->pid_toggle = 1; - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE; - else { - cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); - if (header->s.length) - transaction->stage = CVMX_USB_STAGE_DATA; - else - transaction->stage = CVMX_USB_STAGE_STATUS; - } - break; - case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: - { - cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); - if (header->s.length) - transaction->stage = CVMX_USB_STAGE_DATA; - else - transaction->stage = CVMX_USB_STAGE_STATUS; - } - break; - case CVMX_USB_STAGE_DATA: - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE; - /* For setup OUT data that are splits, the hardware - doesn't appear to count transferred data. Here - we manually update the data transferred */ - if (!usbc_hcchar.s.epdir) { - if (buffer_space_left < pipe->max_packet) - transaction->actual_bytes += buffer_space_left; - else - transaction->actual_bytes += pipe->max_packet; - } - } - else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { - pipe->pid_toggle = 1; - transaction->stage = CVMX_USB_STAGE_STATUS; - } - break; - case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: - if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { - pipe->pid_toggle = 1; - transaction->stage = CVMX_USB_STAGE_STATUS; - } - else { - transaction->stage = CVMX_USB_STAGE_DATA; - } - break; - case CVMX_USB_STAGE_STATUS: - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE; - else - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - break; - case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE: - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - break; - } - break; - case CVMX_USB_TRANSFER_BULK: - case CVMX_USB_TRANSFER_INTERRUPT: - /* The only time a bulk transfer isn't complete when - it finishes with an ACK is during a split transaction. For - splits we need to continue the transfer if more data is - needed */ - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) - transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; - else { - if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet)) - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - else { - if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT) - pipe->next_tx_frame += pipe->interval; - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - } - } - } - else { - if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && - (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && - (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && - (usbc_hcint.s.nak)) - pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; - if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) { - if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT) - pipe->next_tx_frame += pipe->interval; - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - } - } - break; - case CVMX_USB_TRANSFER_ISOCHRONOUS: - if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* ISOCHRONOUS OUT splits don't require a complete split stage. - Instead they use a sequence of begin OUT splits to transfer - the data 188 bytes at a time. Once the transfer is complete, - the pipe sleeps until the next schedule interval */ - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { - /* If no space left or this wasn't a max size packet then - this transfer is complete. Otherwise start it again - to send the next 188 bytes */ - if (!buffer_space_left || (bytes_this_transfer < 188)) { - pipe->next_tx_frame += pipe->interval; - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - } - } - else { - if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) { - /* We are in the incoming data phase. Keep getting - data until we run out of space or get a small - packet */ - if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { - pipe->next_tx_frame += pipe->interval; - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - } - } - else - transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; - } - } - else { - pipe->next_tx_frame += pipe->interval; - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); - } - break; - } - } - else if (usbc_hcint.s.nak) { - /* If this was a split then clear our split in progress marker */ - if (usb->active_split == transaction) - usb->active_split = NULL; - /* NAK as a response means the device couldn't accept the transaction, - but it should be retried in the future. Rewind to the beginning of - the transaction by anding off the split complete bit. Retry in the - next interval */ - transaction->retries = 0; - transaction->stage &= ~1; - pipe->next_tx_frame += pipe->interval; - if (pipe->next_tx_frame < usb->frame_number) - pipe->next_tx_frame = usb->frame_number + pipe->interval - - (usb->frame_number - pipe->next_tx_frame) % pipe->interval; - } - else { - cvmx_usb_port_status_t port; - port = cvmx_usb_get_status((cvmx_usb_state_t *)usb); - if (port.port_enabled) - { - /* We'll retry the exact same transaction again */ - transaction->retries++; - } - else - { - /* We get channel halted interrupts with no result bits sets when the - cable is unplugged */ - __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR); - } - } - return 0; + cvmx_usbcx_hcintx_t usbc_hcint; + cvmx_usbcx_hctsizx_t usbc_hctsiz; + cvmx_usbcx_hccharx_t usbc_hcchar; + cvmx_usb_pipe_t *pipe; + cvmx_usb_transaction_t *transaction; + int bytes_this_transfer; + int bytes_in_last_packet; + int packets_processed; + int buffer_space_left; + + /* Read the interrupt status bits for the channel */ + usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index)); + + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { + usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); + + if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) { + /* There seems to be a bug in CN31XX which can cause interrupt + IN transfers to get stuck until we do a write of HCCHARX + without changing things */ + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); + return 0; + } + + /* In non DMA mode the channels don't halt themselves. We need to + manually disable channels that are left running */ + if (!usbc_hcint.s.chhltd) { + if (usbc_hcchar.s.chena) { + cvmx_usbcx_hcintmskx_t hcintmsk; + /* Disable all interrupts except CHHLTD */ + hcintmsk.u32 = 0; + hcintmsk.s.chhltdmsk = 1; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32); + usbc_hcchar.s.chdis = 1; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); + return 0; + } else if (usbc_hcint.s.xfercompl) { + /* Successful IN/OUT with transfer complete. Channel halt isn't needed */ + } else { + cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel); + return 0; + } + } + } else { + /* There is are no interrupts that we need to process when the channel is + still running */ + if (!usbc_hcint.s.chhltd) + return 0; + } + + /* Disable the channel interrupts now that it is done */ + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0); + usb->idle_hardware_channels |= (1<pipe_for_channel[channel]; + CVMX_PREFETCH(pipe, 0); + CVMX_PREFETCH(pipe, 128); + if (!pipe) + return 0; + transaction = pipe->head; + CVMX_PREFETCH0(transaction); + + /* Disconnect this pipe from the HW channel. Later the schedule function will + figure out which pipe needs to go */ + usb->pipe_for_channel[channel] = NULL; + pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED; + + /* Read the channel config info so we can figure out how much data + transfered */ + usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); + usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); + + /* Calculating the number of bytes successfully transferred is dependent on + the transfer direction */ + packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt; + if (usbc_hcchar.s.epdir) { + /* IN transactions are easy. For every byte received the hardware + decrements xfersize. All we need to do is subtract the current + value of xfersize from its starting value and we know how many + bytes were written to the buffer */ + bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize; + } else { + /* OUT transaction don't decrement xfersize. Instead pktcnt is + decremented on every successful packet send. The hardware does + this when it receives an ACK, or NYET. If it doesn't + receive one of these responses pktcnt doesn't change */ + bytes_this_transfer = packets_processed * usbc_hcchar.s.mps; + /* The last packet may not be a full transfer if we didn't have + enough data */ + if (bytes_this_transfer > transaction->xfersize) + bytes_this_transfer = transaction->xfersize; + } + /* Figure out how many bytes were in the last packet of the transfer */ + if (packets_processed) + bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps; + else + bytes_in_last_packet = bytes_this_transfer; + + /* As a special case, setup transactions output the setup header, not + the user's data. For this reason we don't count setup data as bytes + transferred */ + if ((transaction->stage == CVMX_USB_STAGE_SETUP) || + (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE)) + bytes_this_transfer = 0; + + /* Add the bytes transferred to the running total. It is important that + bytes_this_transfer doesn't count any data that needs to be + retransmitted */ + transaction->actual_bytes += bytes_this_transfer; + if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) + buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes; + else + buffer_space_left = transaction->buffer_length - transaction->actual_bytes; + + /* We need to remember the PID toggle state for the next transaction. The + hardware already updated it for the next transaction */ + pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0); + + /* For high speed bulk out, assume the next transaction will need to do a + ping before proceeding. If this isn't true the ACK processing below + will clear this flag */ + if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && + (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && + (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)) + pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; + + if (usbc_hcint.s.stall) { + /* STALL as a response means this transaction cannot be completed + because the device can't process transactions. Tell the user. Any + data that was transferred will be counted on the actual bytes + transferred */ + pipe->pid_toggle = 0; + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL); + } else if (usbc_hcint.s.xacterr) { + /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */ + if (usbc_hcint.s.nak || usbc_hcint.s.ack) + transaction->retries = 0; + transaction->retries++; + if (transaction->retries > MAX_RETRIES) { + /* XactErr as a response means the device signaled something wrong with + the transfer. For example, PID toggle errors cause these */ + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR); + } else { + /* If this was a split then clear our split in progress marker */ + if (usb->active_split == transaction) + usb->active_split = NULL; + /* Rewind to the beginning of the transaction by anding off the + split complete bit */ + transaction->stage &= ~1; + pipe->split_sc_frame = -1; + pipe->next_tx_frame += pipe->interval; + if (pipe->next_tx_frame < usb->frame_number) + pipe->next_tx_frame = usb->frame_number + pipe->interval - + (usb->frame_number - pipe->next_tx_frame) % pipe->interval; + } + } else if (usbc_hcint.s.bblerr) { + /* Babble Error (BblErr) */ + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR); + } else if (usbc_hcint.s.datatglerr) { + /* We'll retry the exact same transaction again */ + transaction->retries++; + } else if (usbc_hcint.s.nyet) { + /* NYET as a response is only allowed in three cases: as a response to + a ping, as a response to a split transaction, and as a response to + a bulk out. The ping case is handled by hardware, so we only have + splits and bulk out */ + if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { + transaction->retries = 0; + /* If there is more data to go then we need to try again. Otherwise + this transaction is complete */ + if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + } else { + /* Split transactions retry the split complete 4 times then rewind + to the start split and do the entire transactions again */ + transaction->retries++; + if ((transaction->retries & 0x3) == 0) { + /* Rewind to the beginning of the transaction by anding off the + split complete bit */ + transaction->stage &= ~1; + pipe->split_sc_frame = -1; + } + } + } else if (usbc_hcint.s.ack) { + transaction->retries = 0; + /* The ACK bit can only be checked after the other error bits. This is + because a multi packet transfer may succeed in a number of packets + and then get a different response on the last packet. In this case + both ACK and the last response bit will be set. If none of the + other response bits is set, then the last packet must have been an + ACK */ + + /* Since we got an ACK, we know we don't need to do a ping on this + pipe */ + pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING; + + switch (transaction->type) { + case CVMX_USB_TRANSFER_CONTROL: + switch (transaction->stage) { + case CVMX_USB_STAGE_NON_CONTROL: + case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE: + /* This should be impossible */ + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR); + break; + case CVMX_USB_STAGE_SETUP: + pipe->pid_toggle = 1; + if (__cvmx_usb_pipe_needs_split(usb, pipe)) + transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE; + else { + cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); + if (header->s.length) + transaction->stage = CVMX_USB_STAGE_DATA; + else + transaction->stage = CVMX_USB_STAGE_STATUS; + } + break; + case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: + { + cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); + if (header->s.length) + transaction->stage = CVMX_USB_STAGE_DATA; + else + transaction->stage = CVMX_USB_STAGE_STATUS; + } + break; + case CVMX_USB_STAGE_DATA: + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE; + /* For setup OUT data that are splits, the hardware + doesn't appear to count transferred data. Here + we manually update the data transferred */ + if (!usbc_hcchar.s.epdir) { + if (buffer_space_left < pipe->max_packet) + transaction->actual_bytes += buffer_space_left; + else + transaction->actual_bytes += pipe->max_packet; + } + } else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { + pipe->pid_toggle = 1; + transaction->stage = CVMX_USB_STAGE_STATUS; + } + break; + case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: + if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { + pipe->pid_toggle = 1; + transaction->stage = CVMX_USB_STAGE_STATUS; + } else { + transaction->stage = CVMX_USB_STAGE_DATA; + } + break; + case CVMX_USB_STAGE_STATUS: + if (__cvmx_usb_pipe_needs_split(usb, pipe)) + transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE; + else + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + break; + case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE: + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + break; + } + break; + case CVMX_USB_TRANSFER_BULK: + case CVMX_USB_TRANSFER_INTERRUPT: + /* The only time a bulk transfer isn't complete when + it finishes with an ACK is during a split transaction. For + splits we need to continue the transfer if more data is + needed */ + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) + transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; + else { + if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet)) + transaction->stage = CVMX_USB_STAGE_NON_CONTROL; + else { + if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT) + pipe->next_tx_frame += pipe->interval; + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + } + } + } else { + if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && + (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && + (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && + (usbc_hcint.s.nak)) + pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; + if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) { + if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT) + pipe->next_tx_frame += pipe->interval; + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + } + } + break; + case CVMX_USB_TRANSFER_ISOCHRONOUS: + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { + /* ISOCHRONOUS OUT splits don't require a complete split stage. + Instead they use a sequence of begin OUT splits to transfer + the data 188 bytes at a time. Once the transfer is complete, + the pipe sleeps until the next schedule interval */ + if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { + /* If no space left or this wasn't a max size packet then + this transfer is complete. Otherwise start it again + to send the next 188 bytes */ + if (!buffer_space_left || (bytes_this_transfer < 188)) { + pipe->next_tx_frame += pipe->interval; + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + } + } else { + if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) { + /* We are in the incoming data phase. Keep getting + data until we run out of space or get a small + packet */ + if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { + pipe->next_tx_frame += pipe->interval; + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + } + } else + transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; + } + } else { + pipe->next_tx_frame += pipe->interval; + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); + } + break; + } + } else if (usbc_hcint.s.nak) { + /* If this was a split then clear our split in progress marker */ + if (usb->active_split == transaction) + usb->active_split = NULL; + /* NAK as a response means the device couldn't accept the transaction, + but it should be retried in the future. Rewind to the beginning of + the transaction by anding off the split complete bit. Retry in the + next interval */ + transaction->retries = 0; + transaction->stage &= ~1; + pipe->next_tx_frame += pipe->interval; + if (pipe->next_tx_frame < usb->frame_number) + pipe->next_tx_frame = usb->frame_number + pipe->interval - + (usb->frame_number - pipe->next_tx_frame) % pipe->interval; + } else { + cvmx_usb_port_status_t port; + port = cvmx_usb_get_status((cvmx_usb_state_t *)usb); + if (port.port_enabled) { + /* We'll retry the exact same transaction again */ + transaction->retries++; + } else { + /* We get channel halted interrupts with no result bits sets when the + cable is unplugged */ + __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR); + } + } + return 0; } @@ -2850,93 +2812,93 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) * handler for the USB controller. It can also be called * periodically in a loop for non-interrupt based operation. * - * @param state USB device state populated by - * cvmx_usb_initialize(). + * @param state USB device state populated by + * cvmx_usb_initialize(). * * @return 0 or a negative error code. */ int cvmx_usb_poll(cvmx_usb_state_t *state) { - cvmx_usbcx_hfnum_t usbc_hfnum; - cvmx_usbcx_gintsts_t usbc_gintsts; - cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state; - - CVMX_PREFETCH(usb, 0); - CVMX_PREFETCH(usb, 1*128); - CVMX_PREFETCH(usb, 2*128); - CVMX_PREFETCH(usb, 3*128); - CVMX_PREFETCH(usb, 4*128); - - /* Update the frame counter */ - usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index)); - if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum) - usb->frame_number += 0x4000; - usb->frame_number &= ~0x3fffull; - usb->frame_number |= usbc_hfnum.s.frnum; - - /* Read the pending interrupts */ - usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index)); - - /* Clear the interrupts now that we know about them */ - __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32); - - if (usbc_gintsts.s.rxflvl) { - /* RxFIFO Non-Empty (RxFLvl) - Indicates that there is at least one packet pending to be read - from the RxFIFO. */ - /* In DMA mode this is handled by hardware */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - __cvmx_usb_poll_rx_fifo(usb); - } - if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) { - /* Fill the Tx FIFOs when not in DMA mode */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - __cvmx_usb_poll_tx_fifo(usb); - } - if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) { - cvmx_usbcx_hprt_t usbc_hprt; - /* Disconnect Detected Interrupt (DisconnInt) - Asserted when a device disconnect is detected. */ - - /* Host Port Interrupt (PrtInt) - The core sets this bit to indicate a change in port status of one - of the O2P USB core ports in Host mode. The application must - read the Host Port Control and Status (HPRT) register to - determine the exact event that caused this interrupt. The - application must clear the appropriate status bit in the Host Port - Control and Status register to clear this bit. */ - - /* Call the user's port callback */ - __cvmx_usb_perform_callback(usb, NULL, NULL, - CVMX_USB_CALLBACK_PORT_CHANGED, - CVMX_USB_COMPLETE_SUCCESS); - /* Clear the port change bits */ - usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - usbc_hprt.s.prtena = 0; - __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32); - } - if (usbc_gintsts.s.hchint) { - /* Host Channels Interrupt (HChInt) - The core sets this bit to indicate that an interrupt is pending on - one of the channels of the core (in Host mode). The application - must read the Host All Channels Interrupt (HAINT) register to - determine the exact number of the channel on which the - interrupt occurred, and then read the corresponding Host - Channel-n Interrupt (HCINTn) register to determine the exact - cause of the interrupt. The application must clear the - appropriate status bit in the HCINTn register to clear this bit. */ - cvmx_usbcx_haint_t usbc_haint; - usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index)); - while (usbc_haint.u32) { - int channel; - CVMX_CLZ(channel, usbc_haint.u32); - channel = 31 - channel; - __cvmx_usb_poll_channel(usb, channel); - usbc_haint.u32 ^= 1<index)); + if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum) + usb->frame_number += 0x4000; + usb->frame_number &= ~0x3fffull; + usb->frame_number |= usbc_hfnum.s.frnum; + + /* Read the pending interrupts */ + usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index)); + + /* Clear the interrupts now that we know about them */ + __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32); + + if (usbc_gintsts.s.rxflvl) { + /* RxFIFO Non-Empty (RxFLvl) + Indicates that there is at least one packet pending to be read + from the RxFIFO. */ + /* In DMA mode this is handled by hardware */ + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) + __cvmx_usb_poll_rx_fifo(usb); + } + if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) { + /* Fill the Tx FIFOs when not in DMA mode */ + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) + __cvmx_usb_poll_tx_fifo(usb); + } + if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) { + cvmx_usbcx_hprt_t usbc_hprt; + /* Disconnect Detected Interrupt (DisconnInt) + Asserted when a device disconnect is detected. */ + + /* Host Port Interrupt (PrtInt) + The core sets this bit to indicate a change in port status of one + of the O2P USB core ports in Host mode. The application must + read the Host Port Control and Status (HPRT) register to + determine the exact event that caused this interrupt. The + application must clear the appropriate status bit in the Host Port + Control and Status register to clear this bit. */ + + /* Call the user's port callback */ + __cvmx_usb_perform_callback(usb, NULL, NULL, + CVMX_USB_CALLBACK_PORT_CHANGED, + CVMX_USB_COMPLETE_SUCCESS); + /* Clear the port change bits */ + usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); + usbc_hprt.s.prtena = 0; + __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32); + } + if (usbc_gintsts.s.hchint) { + /* Host Channels Interrupt (HChInt) + The core sets this bit to indicate that an interrupt is pending on + one of the channels of the core (in Host mode). The application + must read the Host All Channels Interrupt (HAINT) register to + determine the exact number of the channel on which the + interrupt occurred, and then read the corresponding Host + Channel-n Interrupt (HCINTn) register to determine the exact + cause of the interrupt. The application must clear the + appropriate status bit in the HCINTn register to clear this bit. */ + cvmx_usbcx_haint_t usbc_haint; + usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index)); + while (usbc_haint.u32) { + int channel; + CVMX_CLZ(channel, usbc_haint.u32); + channel = 31 - channel; + __cvmx_usb_poll_channel(usb, channel); + usbc_haint.u32 ^= 1<