From f069b5a0b27ad4a87e9351e54fbcab3d3f8a9fd5 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Sat, 1 Apr 2017 09:43:47 -0700 Subject: [PATCH] Input: bma150 - remove support for bma150 This essentially reverts commit baf28d91e7b1 ("Input: bma150 - avoid binding to bma180 if IIO bma180 driver present") and commit ef3714fdbc8d ("Input: bma150 - extend chip detection for bma180") Rationale: initially (2012) the GTA04 device using a bma180 chip simply referenced the bma150 platform driver in its board file [1] which happened to work in all scenarios that were tested. When conversion to DT started (2014), we needed to make the driver be still recognised. Hence we introduced the compatibility to the bma180 chip in Linux 3.15-rc5 [2] without further checks if it is really 100% compatible. This worked flawlessly for years with the GTA04 device. Recently (2016), Hans de Goede pointed out that the chips are not as similar as they appeared and the driver works with the bma180 for the GTA04 only by good luck. He proposed to remove the bma180 support completely [3], but we still did need it until we have a replacement. Thus, a conditional compile was added. We have now developed a generic iio-input-bridge which works with any 2 or 3 axis iio based accelerometer. It has been tested on GTA04 and Pyra and works as expected. Therefore we can remove the bma180 support from this driver completely. User-space API compatibility can be restored by using the iio-input-bridge. Maybe it is time to convert the bma150 driver to iio as well and retire the accelerometer input drivers completely but this is a different story and task. [1]: https://github.com/neilbrown/linux/blob/gta04/3.2.y/arch/arm/mach-omap2/board-omap3gta04.c#L976 [2]: https://patchwork.kernel.org/patch/3961171/ [3]: https://patchwork.kernel.org/patch/9325481/ Signed-off-by: H. Nikolaus Schaller Reviewed-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/misc/bma150.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c index 1fa85379f86c..1efcfdf9f8a8 100644 --- a/drivers/input/misc/bma150.c +++ b/drivers/input/misc/bma150.c @@ -70,7 +70,6 @@ #define BMA150_CFG_5_REG 0x11 #define BMA150_CHIP_ID 2 -#define BMA180_CHIP_ID 3 #define BMA150_CHIP_ID_REG BMA150_DATA_0_REG #define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG @@ -538,13 +537,8 @@ static int bma150_probe(struct i2c_client *client, return -EIO; } - /* - * Note if the IIO CONFIG_BMA180 driver is enabled we want to fail - * the probe for the bma180 as the iio driver is preferred. - */ chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG); - if (chip_id != BMA150_CHIP_ID && - (IS_ENABLED(CONFIG_BMA180) || chip_id != BMA180_CHIP_ID)) { + if (chip_id != BMA150_CHIP_ID) { dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id); return -EINVAL; } @@ -648,9 +642,6 @@ static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL); static const struct i2c_device_id bma150_id[] = { { "bma150", 0 }, -#if !IS_ENABLED(CONFIG_BMA180) - { "bma180", 0 }, -#endif { "smb380", 0 }, { "bma023", 0 }, { } -- 2.39.5