From f1f82a919d7fff21ee8c0ef4b9731fb38f2a65db Mon Sep 17 00:00:00 2001 From: Xiangliang Yu Date: Tue, 24 May 2011 22:28:31 +0800 Subject: [PATCH] [SCSI] mvsas: add support for 94xx phy tuning and multiple revisions Add 94xx phy tuning to aid manufacturing. Add support for 94xx multiple revisions: A0, B0, C0, C1, C2. Signed-off-by: Xiangliang Yu Signed-off-by: James Bottomley --- drivers/scsi/mvsas/mv_94xx.c | 267 +++++++++++++++++++++++++++++++++-- drivers/scsi/mvsas/mv_94xx.h | 58 ++++++++ drivers/scsi/mvsas/mv_init.c | 3 + drivers/scsi/mvsas/mv_sas.h | 68 +++++++++ 4 files changed, 382 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c index 9d60c7c19b32..3f2ad934c917 100644 --- a/drivers/scsi/mvsas/mv_94xx.c +++ b/drivers/scsi/mvsas/mv_94xx.c @@ -48,6 +48,216 @@ static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i) } } +void set_phy_tuning(struct mvs_info *mvi, int phy_id, + struct phy_tuning phy_tuning) +{ + u32 tmp, setting_0 = 0, setting_1 = 0; + u8 i; + + /* Remap information for B0 chip: + * + * R0Ch -> R118h[15:0] (Adapted DFE F3 - F5 coefficient) + * R0Dh -> R118h[31:16] (Generation 1 Setting 0) + * R0Eh -> R11Ch[15:0] (Generation 1 Setting 1) + * R0Fh -> R11Ch[31:16] (Generation 2 Setting 0) + * R10h -> R120h[15:0] (Generation 2 Setting 1) + * R11h -> R120h[31:16] (Generation 3 Setting 0) + * R12h -> R124h[15:0] (Generation 3 Setting 1) + * R13h -> R124h[31:16] (Generation 4 Setting 0 (Reserved)) + */ + + /* A0 has a different set of registers */ + if (mvi->pdev->revision == VANIR_A0_REV) + return; + + for (i = 0; i < 3; i++) { + /* loop 3 times, set Gen 1, Gen 2, Gen 3 */ + switch (i) { + case 0: + setting_0 = GENERATION_1_SETTING; + setting_1 = GENERATION_1_2_SETTING; + break; + case 1: + setting_0 = GENERATION_1_2_SETTING; + setting_1 = GENERATION_2_3_SETTING; + break; + case 2: + setting_0 = GENERATION_2_3_SETTING; + setting_1 = GENERATION_3_4_SETTING; + break; + } + + /* Set: + * + * Transmitter Emphasis Enable + * Transmitter Emphasis Amplitude + * Transmitter Amplitude + */ + mvs_write_port_vsr_addr(mvi, phy_id, setting_0); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp &= ~(0xFBE << 16); + tmp |= (((phy_tuning.trans_emp_en << 11) | + (phy_tuning.trans_emp_amp << 7) | + (phy_tuning.trans_amp << 1)) << 16); + mvs_write_port_vsr_data(mvi, phy_id, tmp); + + /* Set Transmitter Amplitude Adjust */ + mvs_write_port_vsr_addr(mvi, phy_id, setting_1); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp &= ~(0xC000); + tmp |= (phy_tuning.trans_amp_adj << 14); + mvs_write_port_vsr_data(mvi, phy_id, tmp); + } +} + +void set_phy_ffe_tuning(struct mvs_info *mvi, int phy_id, + struct ffe_control ffe) +{ + u32 tmp; + + /* Don't run this if A0/B0 */ + if ((mvi->pdev->revision == VANIR_A0_REV) + || (mvi->pdev->revision == VANIR_B0_REV)) + return; + + /* FFE Resistor and Capacitor */ + /* R10Ch DFE Resolution Control/Squelch and FFE Setting + * + * FFE_FORCE [7] + * FFE_RES_SEL [6:4] + * FFE_CAP_SEL [3:0] + */ + mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_FFE_CONTROL); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp &= ~0xFF; + + /* Read from HBA_Info_Page */ + tmp |= ((0x1 << 7) | + (ffe.ffe_rss_sel << 4) | + (ffe.ffe_cap_sel << 0)); + + mvs_write_port_vsr_data(mvi, phy_id, tmp); + + /* R064h PHY Mode Register 1 + * + * DFE_DIS 18 + */ + mvs_write_port_vsr_addr(mvi, phy_id, VSR_REF_CLOCK_CRTL); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp &= ~0x40001; + /* Hard coding */ + /* No defines in HBA_Info_Page */ + tmp |= (0 << 18); + mvs_write_port_vsr_data(mvi, phy_id, tmp); + + /* R110h DFE F0-F1 Coefficient Control/DFE Update Control + * + * DFE_UPDATE_EN [11:6] + * DFE_FX_FORCE [5:0] + */ + mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_DFE_UPDATE_CRTL); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp &= ~0xFFF; + /* Hard coding */ + /* No defines in HBA_Info_Page */ + tmp |= ((0x3F << 6) | (0x0 << 0)); + mvs_write_port_vsr_data(mvi, phy_id, tmp); + + /* R1A0h Interface and Digital Reference Clock Control/Reserved_50h + * + * FFE_TRAIN_EN 3 + */ + mvs_write_port_vsr_addr(mvi, phy_id, VSR_REF_CLOCK_CRTL); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp &= ~0x8; + /* Hard coding */ + /* No defines in HBA_Info_Page */ + tmp |= (0 << 3); + mvs_write_port_vsr_data(mvi, phy_id, tmp); +} + +/*Notice: this function must be called when phy is disabled*/ +void set_phy_rate(struct mvs_info *mvi, int phy_id, u8 rate) +{ + union reg_phy_cfg phy_cfg, phy_cfg_tmp; + mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2); + phy_cfg_tmp.v = mvs_read_port_vsr_data(mvi, phy_id); + phy_cfg.v = 0; + phy_cfg.u.disable_phy = phy_cfg_tmp.u.disable_phy; + phy_cfg.u.sas_support = 1; + phy_cfg.u.sata_support = 1; + phy_cfg.u.sata_host_mode = 1; + + switch (rate) { + case 0x0: + /* support 1.5 Gbps */ + phy_cfg.u.speed_support = 1; + phy_cfg.u.snw_3_support = 0; + phy_cfg.u.tx_lnk_parity = 1; + phy_cfg.u.tx_spt_phs_lnk_rate = 0x30; + break; + case 0x1: + + /* support 1.5, 3.0 Gbps */ + phy_cfg.u.speed_support = 3; + phy_cfg.u.tx_spt_phs_lnk_rate = 0x3c; + phy_cfg.u.tx_lgcl_lnk_rate = 0x08; + break; + case 0x2: + default: + /* support 1.5, 3.0, 6.0 Gbps */ + phy_cfg.u.speed_support = 7; + phy_cfg.u.snw_3_support = 1; + phy_cfg.u.tx_lnk_parity = 1; + phy_cfg.u.tx_spt_phs_lnk_rate = 0x3f; + phy_cfg.u.tx_lgcl_lnk_rate = 0x09; + break; + } + mvs_write_port_vsr_data(mvi, phy_id, phy_cfg.v); +} + +static void __devinit +mvs_94xx_config_reg_from_hba(struct mvs_info *mvi, int phy_id) +{ + u32 temp; + temp = (u32)(*(u32 *)&mvi->hba_info_param.phy_tuning[phy_id]); + if (temp == 0xFFFFFFFFL) { + mvi->hba_info_param.phy_tuning[phy_id].trans_emp_amp = 0x6; + mvi->hba_info_param.phy_tuning[phy_id].trans_amp = 0x1A; + mvi->hba_info_param.phy_tuning[phy_id].trans_amp_adj = 0x3; + } + + temp = (u8)(*(u8 *)&mvi->hba_info_param.ffe_ctl[phy_id]); + if (temp == 0xFFL) { + switch (mvi->pdev->revision) { + case VANIR_A0_REV: + case VANIR_B0_REV: + mvi->hba_info_param.ffe_ctl[phy_id].ffe_rss_sel = 0x7; + mvi->hba_info_param.ffe_ctl[phy_id].ffe_cap_sel = 0x7; + break; + case VANIR_C0_REV: + case VANIR_C1_REV: + case VANIR_C2_REV: + default: + mvi->hba_info_param.ffe_ctl[phy_id].ffe_rss_sel = 0x7; + mvi->hba_info_param.ffe_ctl[phy_id].ffe_cap_sel = 0xC; + break; + } + } + + temp = (u8)(*(u8 *)&mvi->hba_info_param.phy_rate[phy_id]); + if (temp == 0xFFL) + /*set default phy_rate = 6Gbps*/ + mvi->hba_info_param.phy_rate[phy_id] = 0x2; + + set_phy_tuning(mvi, phy_id, + mvi->hba_info_param.phy_tuning[phy_id]); + set_phy_ffe_tuning(mvi, phy_id, + mvi->hba_info_param.ffe_ctl[phy_id]); + set_phy_rate(mvi, phy_id, + mvi->hba_info_param.phy_rate[phy_id]); +} + static void __devinit mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id) { void __iomem *regs = mvi->regs; @@ -90,12 +300,25 @@ static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id) static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id) { - mvs_write_port_vsr_addr(mvi, phy_id, 0x1B4); - mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1); - mvs_write_port_vsr_addr(mvi, phy_id, 0x104); - mvs_write_port_vsr_data(mvi, phy_id, 0x00018080); + u32 tmp; + u8 revision = 0; + + revision = mvi->pdev->revision; + if (revision == VANIR_A0_REV) { + mvs_write_port_vsr_addr(mvi, phy_id, CMD_HOST_RD_DATA); + mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1); + } + if (revision == VANIR_B0_REV) { + mvs_write_port_vsr_addr(mvi, phy_id, CMD_APP_MEM_CTL); + mvs_write_port_vsr_data(mvi, phy_id, 0x08001006); + mvs_write_port_vsr_addr(mvi, phy_id, CMD_HOST_RD_DATA); + mvs_write_port_vsr_data(mvi, phy_id, 0x0000705f); + } + mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2); - mvs_write_port_vsr_data(mvi, phy_id, 0x00207fff); + tmp = mvs_read_port_vsr_data(mvi, phy_id); + tmp |= bit(0); + mvs_write_port_vsr_data(mvi, phy_id, tmp & 0xfd7fffff); } static int __devinit mvs_94xx_init(struct mvs_info *mvi) @@ -103,7 +326,9 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi) void __iomem *regs = mvi->regs; int i; u32 tmp, cctl; + u8 revision; + revision = mvi->pdev->revision; mvs_show_pcie_usage(mvi); if (mvi->flags & MVF_FLAG_SOC) { tmp = mr32(MVS_PHY_CTL); @@ -133,6 +358,28 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi) msleep(100); } + /* disable Multiplexing, enable phy implemented */ + mw32(MVS_PORTS_IMP, 0xFF); + + if (revision == VANIR_A0_REV) { + mw32(MVS_PA_VSR_ADDR, CMD_CMWK_OOB_DET); + mw32(MVS_PA_VSR_PORT, 0x00018080); + } + mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE2); + if (revision == VANIR_A0_REV || revision == VANIR_B0_REV) + /* set 6G/3G/1.5G, multiplexing, without SSC */ + mw32(MVS_PA_VSR_PORT, 0x0084d4fe); + else + /* set 6G/3G/1.5G, multiplexing, with and without SSC */ + mw32(MVS_PA_VSR_PORT, 0x0084fffe); + + if (revision == VANIR_B0_REV) { + mw32(MVS_PA_VSR_ADDR, CMD_APP_MEM_CTL); + mw32(MVS_PA_VSR_PORT, 0x08001006); + mw32(MVS_PA_VSR_ADDR, CMD_HOST_RD_DATA); + mw32(MVS_PA_VSR_PORT, 0x0000705f); + } + /* reset control */ mw32(MVS_PCS, 0); /* MVS_PCS */ mw32(MVS_STP_REG_SET_0, 0); @@ -141,15 +388,6 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi) /* init phys */ mvs_phy_hacks(mvi); - /* disable Multiplexing, enable phy implemented */ - mw32(MVS_PORTS_IMP, 0xFF); - - - mw32(MVS_PA_VSR_ADDR, 0x00000104); - mw32(MVS_PA_VSR_PORT, 0x00018080); - mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE8); - mw32(MVS_PA_VSR_PORT, 0x0084ffff); - /* set LED blink when IO*/ mw32(MVS_PA_VSR_ADDR, 0x00000030); tmp = mr32(MVS_PA_VSR_PORT); @@ -178,6 +416,7 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi) (mvi->phy[i].dev_sas_addr)); mvs_94xx_enable_xmt(mvi, i); + mvs_94xx_config_reg_from_hba(mvi, i); mvs_94xx_phy_enable(mvi, i); mvs_94xx_phy_reset(mvi, i, 1); diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h index 8835befe2c0e..33af2a1fb729 100644 --- a/drivers/scsi/mvsas/mv_94xx.h +++ b/drivers/scsi/mvsas/mv_94xx.h @@ -30,6 +30,14 @@ #define MAX_LINK_RATE SAS_LINK_RATE_6_0_GBPS +enum VANIR_REVISION_ID { + VANIR_A0_REV = 0xA0, + VANIR_B0_REV = 0x01, + VANIR_C0_REV = 0x02, + VANIR_C1_REV = 0x03, + VANIR_C2_REV = 0xC2, +}; + enum hw_registers { MVS_GBL_CTL = 0x04, /* global control */ MVS_GBL_INT_STAT = 0x00, /* global irq status */ @@ -126,6 +134,10 @@ enum sas_sata_vsp_regs { VSR_PHY_MODE11 = 0x0B * 4, /* Phy Mode */ VSR_PHY_VS0 = 0x0C * 4, /* Vednor Specific 0 */ VSR_PHY_VS1 = 0x0D * 4, /* Vednor Specific 1 */ + + VSR_PHY_FFE_CONTROL = 0x10C, + VSR_PHY_DFE_UPDATE_CRTL = 0x110, + VSR_REF_CLOCK_CRTL = 0x1A0, }; enum chip_register_bits { @@ -169,6 +181,41 @@ enum pci_interrupt_cause { IRQ_PCIE_ERR = (1 << 31), }; +union reg_phy_cfg { + u32 v; + struct { + u32 phy_reset:1; + u32 sas_support:1; + u32 sata_support:1; + u32 sata_host_mode:1; + /* + * bit 2: 6Gbps support + * bit 1: 3Gbps support + * bit 0: 1.5Gbps support + */ + u32 speed_support:3; + u32 snw_3_support:1; + u32 tx_lnk_parity:1; + /* + * bit 5: G1 (1.5Gbps) Without SSC + * bit 4: G1 (1.5Gbps) with SSC + * bit 3: G2 (3.0Gbps) Without SSC + * bit 2: G2 (3.0Gbps) with SSC + * bit 1: G3 (6.0Gbps) without SSC + * bit 0: G3 (6.0Gbps) with SSC + */ + u32 tx_spt_phs_lnk_rate:6; + /* 8h: 1.5Gbps 9h: 3Gbps Ah: 6Gbps */ + u32 tx_lgcl_lnk_rate:4; + u32 tx_ssc_type:1; + u32 sata_spin_up_spt:1; + u32 sata_spin_up_en:1; + u32 bypass_oob:1; + u32 disable_phy:1; + u32 rsvd:8; + } u; +}; + #define MAX_SG_ENTRY 255 struct mvs_prd_imt { @@ -185,6 +232,17 @@ struct mvs_prd { struct mvs_prd_imt im_len; } __attribute__ ((packed)); +/* + * these registers are accessed through port vendor + * specific address/data registers + */ +enum sas_sata_phy_regs { + GENERATION_1_SETTING = 0x118, + GENERATION_1_2_SETTING = 0x11C, + GENERATION_2_3_SETTING = 0x120, + GENERATION_3_4_SETTING = 0x124, +}; + #define SPI_CTRL_REG_94XX 0xc800 #define SPI_ADDR_REG_94XX 0xc804 #define SPI_WR_DATA_REG_94XX 0xc808 diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 90b636611cde..9f1cccc2a3ed 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -569,6 +569,9 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev, goto err_out_regions; } + memset(&mvi->hba_info_param, 0xFF, + sizeof(struct hba_info_page)); + mvs_init_sas_add(mvi); mvi->instance = nhost; diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h index f96100d7aee1..ccd622f7f841 100644 --- a/drivers/scsi/mvsas/mv_sas.h +++ b/drivers/scsi/mvsas/mv_sas.h @@ -250,6 +250,73 @@ struct mvs_device { u16 reserved; }; +/* Generate PHY tunning parameters */ +struct phy_tuning { + /* 1 bit, transmitter emphasis enable */ + u8 trans_emp_en:1; + /* 4 bits, transmitter emphasis amplitude */ + u8 trans_emp_amp:4; + /* 3 bits, reserved space */ + u8 Reserved_2bit_1:3; + /* 5 bits, transmitter amplitude */ + u8 trans_amp:5; + /* 2 bits, transmitter amplitude adjust */ + u8 trans_amp_adj:2; + /* 1 bit, reserved space */ + u8 resv_2bit_2:1; + /* 2 bytes, reserved space */ + u8 reserved[2]; +}; + +struct ffe_control { + /* 4 bits, FFE Capacitor Select (value range 0~F) */ + u8 ffe_cap_sel:4; + /* 3 bits, FFE Resistor Select (value range 0~7) */ + u8 ffe_rss_sel:3; + /* 1 bit reserve*/ + u8 reserved:1; +}; + +/* + * HBA_Info_Page is saved in Flash/NVRAM, total 256 bytes. + * The data area is valid only Signature="MRVL". + * If any member fills with 0xFF, the member is invalid. + */ +struct hba_info_page { + /* Dword 0 */ + /* 4 bytes, structure signature,should be "MRVL" at first initial */ + u8 signature[4]; + + /* Dword 1-13 */ + u32 reserved1[13]; + + /* Dword 14-29 */ + /* 64 bytes, SAS address for each port */ + u64 sas_addr[8]; + + /* Dword 30-31 */ + /* 8 bytes for vanir 8 port PHY FFE seeting + * BIT 0~3 : FFE Capacitor select(value range 0~F) + * BIT 4~6 : FFE Resistor select(value range 0~7) + * BIT 7: reserve. + */ + + struct ffe_control ffe_ctl[8]; + /* Dword 32 -43 */ + u32 reserved2[12]; + + /* Dword 44-45 */ + /* 8 bytes, 0: 1.5G, 1: 3.0G, should be 0x01 at first initial */ + u8 phy_rate[8]; + + /* Dword 46-53 */ + /* 32 bytes, PHY tuning parameters for each PHY*/ + struct phy_tuning phy_tuning[8]; + + /* Dword 54-63 */ + u32 reserved3[10]; +}; /* total 256 bytes */ + struct mvs_slot_info { struct list_head entry; union { @@ -338,6 +405,7 @@ struct mvs_info { u32 flashsectSize; void *addon; + struct hba_info_page hba_info_param; struct mvs_device devices[MVS_MAX_DEVICES]; #ifndef DISABLE_HOTPLUG_DMA_FIX void *bulk_buffer; -- 2.39.5