From f266611ef30837a9bff442e905c1a72eca218cef Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 10 Feb 2011 10:20:08 +0100 Subject: [PATCH] sched: Try not to migrate higher priority RT tasks Commit: 43fa5460fe60dea5c610490a1d263415419c60f6 upstream When first working on the RT scheduler design, we concentrated on keeping all CPUs running RT tasks instead of having multiple RT tasks on a single CPU waiting for the migration thread to move them. Instead we take a more proactive stance and push or pull RT tasks from one CPU to another on wakeup or scheduling. When an RT task wakes up on a CPU that is running another RT task, instead of preempting it and killing the cache of the running RT task, we look to see if we can migrate the RT task that is waking up, even if the RT task waking up is of higher priority. This may sound a bit odd, but RT tasks should be limited in migration by the user anyway. But in practice, people do not do this, which causes high prio RT tasks to bounce around the CPUs. This becomes even worse when we have priority inheritance, because a high prio task can block on a lower prio task and boost its priority. When the lower prio task wakes up the high prio task, if it happens to be on the same CPU it will migrate off of it. But in reality, the above does not happen much either, because the wake up of the lower prio task, which has already been boosted, if it was on the same CPU as the higher prio task, it would then migrate off of it. But anyway, we do not want to migrate them either. To examine the scheduling, I created a test program and examined it under kernelshark. The test program created CPU * 2 threads, where each thread had a different priority. The program takes different options. The options used in this change log was to have priority inheritance mutexes or not. All threads did the following loop: static void grab_lock(long id, int iter, int l) { ftrace_write("thread %ld iter %d, taking lock %d\n", id, iter, l); pthread_mutex_lock(&locks[l]); ftrace_write("thread %ld iter %d, took lock %d\n", id, iter, l); busy_loop(nr_tasks - id); ftrace_write("thread %ld iter %d, unlock lock %d\n", id, iter, l); pthread_mutex_unlock(&locks[l]); } void *start_task(void *id) { [...] while (!done) { for (l = 0; l < nr_locks; l++) { grab_lock(id, i, l); ftrace_write("thread %ld iter %d sleeping\n", id, i); ms_sleep(id); } i++; } [...] } The busy_loop(ms) keeps the CPU spinning for ms milliseconds. The ms_sleep(ms) sleeps for ms milliseconds. The ftrace_write() writes to the ftrace buffer to help analyze via ftrace. The higher the id, the higher the prio, the shorter it does the busy loop, but the longer it spins. This is usually the case with RT tasks, the lower priority tasks usually run longer than higher priority tasks. At the end of the test, it records the number of loops each thread took, as well as the number of voluntary preemptions, non-voluntary preemptions, and number of migrations each thread took, taking the information from /proc/$$/sched and /proc/$$/status. Running this on a 4 CPU processor, the results without changes to the kernel looked like this: Task vol nonvol migrated iterations ---- --- ------ -------- ---------- 0: 53 3220 1470 98 1: 562 773 724 98 2: 752 933 1375 98 3: 749 39 697 98 4: 758 5 515 98 5: 764 2 679 99 6: 761 2 535 99 7: 757 3 346 99 total: 5156 4977 6341 787 Each thread regardless of priority migrated a few hundred times. The higher priority tasks, were a little better but still took quite an impact. By letting higher priority tasks bump the lower prio task from the CPU, things changed a bit: Task vol nonvol migrated iterations ---- --- ------ -------- ---------- 0: 37 2835 1937 98 1: 666 1821 1865 98 2: 654 1003 1385 98 3: 664 635 973 99 4: 698 197 352 99 5: 703 101 159 99 6: 708 1 75 99 7: 713 1 2 99 total: 4843 6594 6748 789 The total # of migrations did not change (several runs showed the difference all within the noise). But we now see a dramatic improvement to the higher priority tasks. (kernelshark showed that the watchdog timer bumped the highest priority task to give it the 2 count. This was actually consistent with every run). Notice that the # of iterations did not change either. The above was with priority inheritance mutexes. That is, when the higher prority task blocked on a lower priority task, the lower priority task would inherit the higher priority task (which shows why task 6 was bumped so many times). When not using priority inheritance mutexes, the current kernel shows this: Task vol nonvol migrated iterations ---- --- ------ -------- ---------- 0: 56 3101 1892 95 1: 594 713 937 95 2: 625 188 618 95 3: 628 4 491 96 4: 640 7 468 96 5: 631 2 501 96 6: 641 1 466 96 7: 643 2 497 96 total: 4458 4018 5870 765 Not much changed with or without priority inheritance mutexes. But if we let the high priority task bump lower priority tasks on wakeup we see: Task vol nonvol migrated iterations ---- --- ------ -------- ---------- 0: 115 3439 2782 98 1: 633 1354 1583 99 2: 652 919 1218 99 3: 645 713 934 99 4: 690 3 3 99 5: 694 1 4 99 6: 720 3 4 99 7: 747 0 1 100 Which shows a even bigger change. The big difference between task 3 and task 4 is because we have only 4 CPUs on the machine, causing the 4 highest prio tasks to always have preference. Although I did not measure cache misses, and I'm sure there would be little to measure since the test was not data intensive, I could imagine large improvements for higher priority tasks when dealing with lower priority tasks. Thus, I'm satisfied with making the change and agreeing with what Gregory Haskins argued a few years ago when we first had this discussion. One final note. All tasks in the above tests were RT tasks. Any RT task will always preempt a non RT task that is running on the CPU the RT task wants to run on. Signed-off-by: Steven Rostedt Signed-off-by: Peter Zijlstra Cc: Gregory Haskins LKML-Reference: <20100921024138.605460343@goodmis.org> Signed-off-by: Ingo Molnar Signed-off-by: Mike Galbraith Acked-by: Peter Zijlstra Signed-off-by: Greg Kroah-Hartman --- kernel/sched_rt.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index af24fab76a9e..d2d481f53040 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -954,18 +954,18 @@ select_task_rq_rt(struct rq *rq, struct task_struct *p, int sd_flag, int flags) * runqueue. Otherwise simply start this RT task * on its current runqueue. * - * We want to avoid overloading runqueues. Even if - * the RT task is of higher priority than the current RT task. - * RT tasks behave differently than other tasks. If - * one gets preempted, we try to push it off to another queue. - * So trying to keep a preempting RT task on the same - * cache hot CPU will force the running RT task to - * a cold CPU. So we waste all the cache for the lower - * RT task in hopes of saving some of a RT task - * that is just being woken and probably will have - * cold cache anyway. + * We want to avoid overloading runqueues. If the woken + * task is a higher priority, then it will stay on this CPU + * and the lower prio task should be moved to another CPU. + * Even though this will probably make the lower prio task + * lose its cache, we do not want to bounce a higher task + * around just because it gave up its CPU, perhaps for a + * lock? + * + * For equal prio tasks, we just let the scheduler sort it out. */ if (unlikely(rt_task(rq->curr)) && + rq->curr->prio < p->prio && (p->rt.nr_cpus_allowed > 1)) { int cpu = find_lowest_rq(p); @@ -1493,6 +1493,8 @@ static void task_woken_rt(struct rq *rq, struct task_struct *p) if (!task_running(rq, p) && !test_tsk_need_resched(rq->curr) && has_pushable_tasks(rq) && + rt_task(rq->curr) && + rq->curr->prio < p->prio && p->rt.nr_cpus_allowed > 1) push_rt_tasks(rq); } -- 2.39.5