From f5df0b7ff57732f938373f49e89ca219d4717836 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 Mar 2013 08:43:14 -0300 Subject: [PATCH] [media] solo6x10: clean up motion detection handling An earlier patch temporarily disabled regional motion detection. This patch adds it back: the 'Motion Detection Enable' control is now a 'Motion Detection Mode'. And to set/get the regional thresholds two new ioctls were added to get/set those thresholds. The BUF_FLAG constants were also updated to prevent clashing with existing buffer flags. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/solo6x10/disp.c | 37 ++++------ drivers/staging/media/solo6x10/solo6x10.h | 27 +++++-- drivers/staging/media/solo6x10/v4l2-enc.c | 87 ++++++++++++++++------- 3 files changed, 97 insertions(+), 54 deletions(-) diff --git a/drivers/staging/media/solo6x10/disp.c b/drivers/staging/media/solo6x10/disp.c index 7007006e9638..78070c843f90 100644 --- a/drivers/staging/media/solo6x10/disp.c +++ b/drivers/staging/media/solo6x10/disp.c @@ -201,31 +201,22 @@ int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val) val, SOLO_MOT_THRESH_SIZE); } -int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch, u16 val, - u16 block) +int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch, + const struct solo_motion_thresholds *thresholds) { - u16 buf[64]; - u32 addr; - int re; - - addr = SOLO_MOTION_EXT_ADDR(solo_dev) + - SOLO_MOT_FLAG_AREA + - (SOLO_MOT_THRESH_SIZE * 2 * ch) + - (block * 2); - - /* Read and write only on a 128-byte boundary; 4-byte writes with - solo_p2m_dma silently failed. Bluecherry bug #908. */ - re = solo_p2m_dma(solo_dev, 0, &buf, addr & ~0x7f, sizeof(buf), 0, 0); - if (re) - return re; - - buf[(addr & 0x7f) / 2] = val; - - re = solo_p2m_dma(solo_dev, 1, &buf, addr & ~0x7f, sizeof(buf), 0, 0); - if (re) - return re; + u32 off = SOLO_MOT_FLAG_AREA + ch * SOLO_MOT_THRESH_SIZE * 2; + u16 buf[SOLO_MOTION_SZ]; + int x, y; + int ret = 0; - return 0; + for (y = 0; y < SOLO_MOTION_SZ; y++) { + for (x = 0; x < SOLO_MOTION_SZ; x++) + buf[x] = cpu_to_le16(thresholds->thresholds[y][x]); + ret |= solo_p2m_dma(solo_dev, 1, buf, + SOLO_MOTION_EXT_ADDR(solo_dev) + off + y * sizeof(buf), + sizeof(buf), 0, 0); + } + return ret; } /* First 8k is motion flag (512 bytes * 16). Following that is an 8k+8k diff --git a/drivers/staging/media/solo6x10/solo6x10.h b/drivers/staging/media/solo6x10/solo6x10.h index 94ac294fb048..da7611ea0e7e 100644 --- a/drivers/staging/media/solo6x10/solo6x10.h +++ b/drivers/staging/media/solo6x10/solo6x10.h @@ -98,16 +98,30 @@ #define SOLO_DEFAULT_QP 3 #ifndef V4L2_BUF_FLAG_MOTION_ON -#define V4L2_BUF_FLAG_MOTION_ON 0x0400 -#define V4L2_BUF_FLAG_MOTION_DETECTED 0x0800 +#define V4L2_BUF_FLAG_MOTION_ON 0x10000 +#define V4L2_BUF_FLAG_MOTION_DETECTED 0x20000 #endif #define SOLO_CID_CUSTOM_BASE (V4L2_CID_USER_BASE | 0xf000) -#define V4L2_CID_MOTION_ENABLE (SOLO_CID_CUSTOM_BASE+0) +#define V4L2_CID_MOTION_MODE (SOLO_CID_CUSTOM_BASE+0) #define V4L2_CID_MOTION_THRESHOLD (SOLO_CID_CUSTOM_BASE+1) #define V4L2_CID_MOTION_TRACE (SOLO_CID_CUSTOM_BASE+2) #define V4L2_CID_OSD_TEXT (SOLO_CID_CUSTOM_BASE+3) +/* + * Motion thresholds are in a table of 64x64 samples, with + * each sample representing 16x16 pixels of the source. In + * effect, 44x30 samples are used for NTSC, and 44x36 for PAL. + * The 5th sample on the 10th row is (10*64)+5 = 645. + */ +#define SOLO_MOTION_SZ (64) +struct solo_motion_thresholds { + __u16 thresholds[SOLO_MOTION_SZ][SOLO_MOTION_SZ]; +}; + +#define SOLO_IOC_G_MOTION_THRESHOLDS _IOR('V', BASE_VIDIOC_PRIVATE+0, struct solo_motion_thresholds) +#define SOLO_IOC_S_MOTION_THRESHOLDS _IOW('V', BASE_VIDIOC_PRIVATE+1, struct solo_motion_thresholds) + enum SOLO_I2C_STATE { IIC_STATE_IDLE, IIC_STATE_START, @@ -157,6 +171,9 @@ struct solo_enc_dev { u8 mode, gop, qp, interlaced, interval; u8 bw_weight; u16 motion_thresh; + struct solo_motion_thresholds motion_thresholds; + bool motion_global; + bool motion_enabled; u16 width; u16 height; @@ -381,8 +398,8 @@ void solo_update_mode(struct solo_enc_dev *solo_enc); /* Set the threshold for motion detection */ int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val); -int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch, u16 val, - u16 block); +int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch, + const struct solo_motion_thresholds *thresholds); #define SOLO_DEF_MOT_THRESH 0x0300 /* Write text on OSD */ diff --git a/drivers/staging/media/solo6x10/v4l2-enc.c b/drivers/staging/media/solo6x10/v4l2-enc.c index 0efb6237f685..b1fa78b2eaff 100644 --- a/drivers/staging/media/solo6x10/v4l2-enc.c +++ b/drivers/staging/media/solo6x10/v4l2-enc.c @@ -511,6 +511,8 @@ static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc, int ret; /* Check for motion flags */ + vb->v4l2_buf.flags &= ~(V4L2_BUF_FLAG_MOTION_ON | + V4L2_BUF_FLAG_MOTION_DETECTED); if (solo_is_motion_on(solo_enc)) { vb->v4l2_buf.flags |= V4L2_BUF_FLAG_MOTION_ON; if (enc_buf->motion) @@ -1018,6 +1020,31 @@ static int solo_s_parm(struct file *file, void *priv, return 0; } +static long solo_enc_default(struct file *file, void *fh, + bool valid_prio, int cmd, void *arg) +{ + struct solo_enc_dev *solo_enc = video_drvdata(file); + struct solo_dev *solo_dev = solo_enc->solo_dev; + struct solo_motion_thresholds *thresholds = arg; + + switch (cmd) { + case SOLO_IOC_G_MOTION_THRESHOLDS: + *thresholds = solo_enc->motion_thresholds; + return 0; + + case SOLO_IOC_S_MOTION_THRESHOLDS: + if (!valid_prio) + return -EBUSY; + solo_enc->motion_thresholds = *thresholds; + if (solo_enc->motion_enabled && !solo_enc->motion_global) + return solo_set_motion_block(solo_dev, solo_enc->ch, + &solo_enc->motion_thresholds); + return 0; + default: + return -ENOTTY; + } +} + static int solo_s_ctrl(struct v4l2_ctrl *ctrl) { struct solo_enc_dev *solo_enc = @@ -1036,28 +1063,22 @@ static int solo_s_ctrl(struct v4l2_ctrl *ctrl) case V4L2_CID_MPEG_VIDEO_GOP_SIZE: solo_enc->gop = ctrl->val; return 0; - case V4L2_CID_MOTION_THRESHOLD: { - u16 block = (ctrl->val >> 16) & 0xffff; - u16 value = ctrl->val & 0xffff; - - /* Motion thresholds are in a table of 64x64 samples, with - * each sample representing 16x16 pixels of the source. In - * effect, 44x30 samples are used for NTSC, and 44x36 for PAL. - * The 5th sample on the 10th row is (10*64)+5 = 645. - * - * Block is 0 to set the threshold globally, or any positive - * number under 2049 to set block-1 individually. */ - /* Currently we limit support to block 0 only. A later patch - * will add a new ioctl to set all other blocks. */ - if (block == 0) { - solo_enc->motion_thresh = value; - return solo_set_motion_threshold(solo_dev, - solo_enc->ch, value); + case V4L2_CID_MOTION_THRESHOLD: + solo_enc->motion_thresh = ctrl->val; + if (!solo_enc->motion_global || !solo_enc->motion_enabled) + return 0; + return solo_set_motion_threshold(solo_dev, solo_enc->ch, ctrl->val); + case V4L2_CID_MOTION_MODE: + solo_enc->motion_global = ctrl->val == 1; + solo_enc->motion_enabled = ctrl->val > 0; + if (ctrl->val) { + if (solo_enc->motion_global) + solo_set_motion_threshold(solo_dev, solo_enc->ch, + solo_enc->motion_thresh); + else + solo_set_motion_block(solo_dev, solo_enc->ch, + &solo_enc->motion_thresholds); } - return solo_set_motion_block(solo_dev, solo_enc->ch, - value, block - 1); - } - case V4L2_CID_MOTION_ENABLE: solo_motion_toggle(solo_enc, ctrl->val); return 0; case V4L2_CID_OSD_TEXT: @@ -1111,6 +1132,7 @@ static const struct v4l2_ioctl_ops solo_enc_ioctl_ops = { .vidioc_log_status = v4l2_ctrl_log_status, .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_default = solo_enc_default, }; static const struct video_device solo_enc_template = { @@ -1137,13 +1159,20 @@ static const struct v4l2_ctrl_config solo_motion_threshold_ctrl = { .flags = V4L2_CTRL_FLAG_SLIDER, }; +static const char * const solo_motion_mode_menu[] = { + "Disabled", + "Global Threshold", + "Regional Threshold", + NULL +}; + static const struct v4l2_ctrl_config solo_motion_enable_ctrl = { .ops = &solo_ctrl_ops, - .id = V4L2_CID_MOTION_ENABLE, - .name = "Motion Detection Enable", - .type = V4L2_CTRL_TYPE_BOOLEAN, - .max = 1, - .step = 1, + .id = V4L2_CID_MOTION_MODE, + .name = "Motion Detection Mode", + .type = V4L2_CTRL_TYPE_MENU, + .qmenu = solo_motion_mode_menu, + .max = 2, }; static const struct v4l2_ctrl_config solo_osd_text_ctrl = { @@ -1161,6 +1190,7 @@ static struct solo_enc_dev *solo_enc_alloc(struct solo_dev *solo_dev, struct solo_enc_dev *solo_enc; struct v4l2_ctrl_handler *hdl; int ret; + int x, y; solo_enc = kzalloc(sizeof(*solo_enc), GFP_KERNEL); if (!solo_enc) @@ -1201,7 +1231,12 @@ static struct solo_enc_dev *solo_enc_alloc(struct solo_dev *solo_dev, solo_enc->gop = solo_dev->fps; solo_enc->interval = 1; solo_enc->mode = SOLO_ENC_MODE_CIF; + solo_enc->motion_global = true; solo_enc->motion_thresh = SOLO_DEF_MOT_THRESH; + for (y = 0; y < SOLO_MOTION_SZ; y++) + for (x = 0; x < SOLO_MOTION_SZ; x++) + solo_enc->motion_thresholds.thresholds[y][x] = + SOLO_DEF_MOT_THRESH; solo_enc->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; solo_enc->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; -- 2.39.5