From f5f1c2cbe8785c212794067ce57aeb6439be7ac1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 20 Sep 2015 08:30:50 -0400 Subject: [PATCH] ARM: dts: sun8i: Add pwm-backlight device for A23/A33 Q8 format tablets The LCD backlight on the A23/A33 Q8 format tablets is enabled with a GPIO controlled regulator, and brightness controlled with the SoC's PWM controller. The backlight is powered from the AXP223 PMIC's DC1SW output, which is not supported yet. A proper bootloader is required to enable it. The brightness levels are arbitrary. The FEX files do not have such information. As such, actual brightness levels may differ from device to device. Signed-off-by: Chen-Yu Tsai Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-q8-common.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 6f8a8bb4e9bb..f34273602f64 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -41,11 +41,24 @@ */ #include "sunxi-q8-common.dtsi" +#include + / { aliases { serial0 = &r_uart; }; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_q8>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + /* backlight is powered by AXP223 DC1SW */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -62,6 +75,13 @@ }; &pio { + bl_en_pin_q8: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_q8: mmc0_cd_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_in"; -- 2.39.5