From f704648281831fbb8a4ca1acbe18cb84bc0267c8 Mon Sep 17 00:00:00 2001 From: wwang Date: Wed, 3 Aug 2011 16:00:25 +0800 Subject: [PATCH] staging:rts_pstor: fix thread synchronization flow Using different completion variables to synchronize different kernel threads This patch fix a bug that may cause memory leak when driver disconnected. This is not a very urgent bug. Because with the default setting, driver disconnectting routine won't be called except when Linux is shut down. But if the option auto_delink_en is set, a small number of memory would leak out after memory card unplugged. Signed-off-by: wwang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rts_pstor/rtsx.c | 109 ++++++++++++------------------- drivers/staging/rts_pstor/rtsx.h | 9 ++- 2 files changed, 50 insertions(+), 68 deletions(-) diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index 5ff59f27d10..16c73fbff51 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -66,12 +66,6 @@ static int msi_en; module_param(msi_en, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(msi_en, "enable msi"); -/* These are used to make sure the module doesn't unload before all the - * threads have exited. - */ -static atomic_t total_threads = ATOMIC_INIT(0); -static DECLARE_COMPLETION(threads_gone); - static irqreturn_t rtsx_interrupt(int irq, void *dev_id); /*********************************************************************** @@ -192,7 +186,7 @@ static int queuecommand_lck(struct scsi_cmnd *srb, /* enqueue the command and wake up the control thread */ srb->scsi_done = done; chip->srb = srb; - up(&(dev->sema)); + complete(&dev->cmnd_ready); return 0; } @@ -475,7 +469,7 @@ static int rtsx_control_thread(void *__dev) current->flags |= PF_NOFREEZE; for (;;) { - if (down_interruptible(&dev->sema)) + if (wait_for_completion_interruptible(&dev->cmnd_ready)) break; /* lock the device pointers */ @@ -557,8 +551,6 @@ SkipForAbort: mutex_unlock(&dev->dev_mutex); } /* for (;;) */ - scsi_host_put(host); - /* notify the exit routine that we're actually exiting now * * complete()/wait_for_completion() is similar to up()/down(), @@ -573,7 +565,7 @@ SkipForAbort: * This is important in preemption kernels, which transfer the flow * of execution immediately upon a complete(). */ - complete_and_exit(&threads_gone, 0); + complete_and_exit(&dev->control_exit, 0); } @@ -581,7 +573,6 @@ static int rtsx_polling_thread(void *__dev) { struct rtsx_dev *dev = (struct rtsx_dev *)__dev; struct rtsx_chip *chip = dev->chip; - struct Scsi_Host *host = rtsx_to_host(dev); struct sd_info *sd_card = &(chip->sd_card); struct xd_info *xd_card = &(chip->xd_card); struct ms_info *ms_card = &(chip->ms_card); @@ -621,8 +612,7 @@ static int rtsx_polling_thread(void *__dev) mutex_unlock(&dev->dev_mutex); } - scsi_host_put(host); - complete_and_exit(&threads_gone, 0); + complete_and_exit(&dev->polling_exit, 0); } /* @@ -699,29 +689,38 @@ static void rtsx_release_resources(struct rtsx_dev *dev) { printk(KERN_INFO "-- %s\n", __func__); + /* Tell the control thread to exit. The SCSI host must + * already have been removed so it won't try to queue + * any more commands. + */ + printk(KERN_INFO "-- sending exit command to thread\n"); + complete(&dev->cmnd_ready); + if (dev->ctl_thread) + wait_for_completion(&dev->control_exit); + if (dev->polling_thread) + wait_for_completion(&dev->polling_exit); + + wait_timeout(200); + if (dev->rtsx_resv_buf) { - dma_free_coherent(&(dev->pci->dev), HOST_CMDS_BUF_LEN, + dma_free_coherent(&(dev->pci->dev), RTSX_RESV_BUF_LEN, dev->rtsx_resv_buf, dev->rtsx_resv_buf_addr); dev->chip->host_cmds_ptr = NULL; dev->chip->host_sg_tbl_ptr = NULL; } - pci_disable_device(dev->pci); - pci_release_regions(dev->pci); - - if (dev->irq > 0) { + if (dev->irq > 0) free_irq(dev->irq, (void *)dev); - } - if (dev->chip->msi_en) { + if (dev->chip->msi_en) pci_disable_msi(dev->pci); - } + if (dev->remap_addr) + iounmap(dev->remap_addr); - /* Tell the control thread to exit. The SCSI host must - * already have been removed so it won't try to queue - * any more commands. - */ - printk(KERN_INFO "-- sending exit command to thread\n"); - up(&dev->sema); + pci_disable_device(dev->pci); + pci_release_regions(dev->pci); + + rtsx_release_chip(dev->chip); + kfree(dev->chip); } /* First stage of disconnect processing: stop all commands and remove @@ -739,6 +738,7 @@ static void quiesce_and_remove_host(struct rtsx_dev *dev) scsi_unlock(host); mutex_unlock(&dev->dev_mutex); wake_up(&dev->delay_wait); + wait_for_completion(&dev->scanning_done); /* Wait some time to let other threads exist */ wait_timeout(100); @@ -793,8 +793,7 @@ static int rtsx_scan_thread(void *__dev) /* Should we unbind if no devices were detected? */ } - scsi_host_put(rtsx_to_host(dev)); - complete_and_exit(&threads_gone, 0); + complete_and_exit(&dev->scanning_done, 0); } static void rtsx_init_options(struct rtsx_chip *chip) @@ -941,8 +940,11 @@ static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id spin_lock_init(&dev->reg_lock); mutex_init(&(dev->dev_mutex)); - sema_init(&(dev->sema), 0); + init_completion(&dev->cmnd_ready); + init_completion(&dev->control_exit); + init_completion(&dev->polling_exit); init_completion(&(dev->notify)); + init_completion(&dev->scanning_done); init_waitqueue_head(&dev->delay_wait); dev->pci = pci; @@ -992,28 +994,22 @@ static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id pci_set_master(pci); synchronize_irq(dev->irq); - err = scsi_add_host(host, &pci->dev); - if (err) { - printk(KERN_ERR "Unable to add the scsi host\n"); - goto errout; - } - rtsx_init_chip(dev->chip); /* Start up our control thread */ - th = kthread_create(rtsx_control_thread, dev, CR_DRIVER_NAME); + th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start control thread\n"); err = PTR_ERR(th); goto errout; } + dev->ctl_thread = th; - /* Take a reference to the host for the control thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(rtsx_to_host(dev)); - atomic_inc(&total_threads); - wake_up_process(th); + err = scsi_add_host(host, &pci->dev); + if (err) { + printk(KERN_ERR "Unable to add the scsi host\n"); + goto errout; + } /* Start up the thread for delayed SCSI-device scanning */ th = kthread_create(rtsx_scan_thread, dev, "rtsx-scan"); @@ -1024,28 +1020,17 @@ static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id goto errout; } - /* Take a reference to the host for the scanning thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(rtsx_to_host(dev)); - atomic_inc(&total_threads); wake_up_process(th); /* Start up the thread for polling thread */ - th = kthread_create(rtsx_polling_thread, dev, "rtsx-polling"); + th = kthread_run(rtsx_polling_thread, dev, "rtsx-polling"); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start the device-polling thread\n"); quiesce_and_remove_host(dev); err = PTR_ERR(th); goto errout; } - - /* Take a reference to the host for the polling thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(rtsx_to_host(dev)); - atomic_inc(&total_threads); - wake_up_process(th); + dev->polling_thread = th; pci_set_drvdata(pci, dev); @@ -1108,16 +1093,6 @@ static void __exit rtsx_exit(void) pci_unregister_driver(&driver); - /* Don't return until all of our control and scanning threads - * have exited. Since each thread signals threads_gone as its - * last act, we have to call wait_for_completion the right number - * of times. - */ - while (atomic_read(&total_threads) > 0) { - wait_for_completion(&threads_gone); - atomic_dec(&total_threads); - } - printk(KERN_INFO "%s module exit\n", CR_DRIVER_NAME); } diff --git a/drivers/staging/rts_pstor/rtsx.h b/drivers/staging/rts_pstor/rtsx.h index 247615ba1d2..86e47c2e3e3 100644 --- a/drivers/staging/rts_pstor/rtsx.h +++ b/drivers/staging/rts_pstor/rtsx.h @@ -112,9 +112,16 @@ struct rtsx_dev { /* locks */ spinlock_t reg_lock; + struct task_struct *ctl_thread; /* the control thread */ + struct task_struct *polling_thread; /* the polling thread */ + /* mutual exclusion and synchronization structures */ - struct semaphore sema; /* to sleep thread on */ + struct completion cmnd_ready; /* to sleep thread on */ + struct completion control_exit; /* control thread exit */ + struct completion polling_exit; /* polling thread exit */ struct completion notify; /* thread begin/end */ + struct completion scanning_done; /* wait for scan thread */ + wait_queue_head_t delay_wait; /* wait during scan, reset */ struct mutex dev_mutex; -- 2.39.5