From f8c1700dd7d2ce9b2238b20d364317b2968ac76b Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 20 Sep 2013 13:13:02 +0530 Subject: [PATCH] regulator: core: set current constraints while setting machine constraints Machine constraints is configured during regulator register. If current constraints are provided through machine constraints then it is observed that sometime the current configured on rail is out of range what machine constraint has. Set the current constraints when setting machine constraints to make sure that rail's current is within the range of given machine constraints. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/core.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5217c1964c32..66ae12d12c10 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -923,6 +923,36 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, return 0; } +static int machine_constraints_current(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + struct regulator_ops *ops = rdev->desc->ops; + int ret; + + if (!constraints->min_uA && !constraints->max_uA) + return 0; + + if (constraints->min_uA > constraints->max_uA) { + rdev_err(rdev, "Invalid current constraints\n"); + return -EINVAL; + } + + if (!ops->set_current_limit || !ops->get_current_limit) { + rdev_warn(rdev, "Operation of current configuration missing\n"); + return 0; + } + + /* Set regulator current in constraints range */ + ret = ops->set_current_limit(rdev, constraints->min_uA, + constraints->max_uA); + if (ret < 0) { + rdev_err(rdev, "Failed to set current constraint, %d\n", ret); + return ret; + } + + return 0; +} + /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -953,6 +983,10 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (ret != 0) goto out; + ret = machine_constraints_current(rdev, rdev->constraints); + if (ret != 0) + goto out; + /* do we need to setup our suspend state */ if (rdev->constraints->initial_state) { ret = suspend_prepare(rdev, rdev->constraints->initial_state); -- 2.39.2