From fe67dfc874da094bbbfbb73e74924d414b96105b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 7 Mar 2011 11:48:15 +0100 Subject: [PATCH] mach-ux500: configure board for the TPS61052 regulator v2 This registers the TPS61052 regulator to the ux500 MOP/HREF boards. Cc: Samuel Ortiz Cc: Liam Girdwood Cc: Mark Brown Cc: Ola Lilja Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + arch/arm/mach-ux500/board-mop500-regulators.c | 24 +++++++++++++++++++ arch/arm/mach-ux500/board-mop500-regulators.h | 1 + arch/arm/mach-ux500/board-mop500.c | 23 +++++++++++++++++- 4 files changed, 48 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 203b986280f5..58626013aa32 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -23,6 +23,7 @@ menu "Ux500 target platform" config MACH_U8500 bool "U8500 Development platform" depends on UX500_SOC_DB8500 + select TPS6105X help Include support for the mop500 development platform. diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index d4f33ebaf637..9ed0f90cfe23 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,6 +13,30 @@ #include #include "board-mop500-regulators.h" +/* + * TPS61052 regulator + */ +static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { + /* + * Boost converter supply to raise voltage on audio speaker, this + * is actually connected to three pins, VInVhfL (left amplifier) + * VInVhfR (right amplifier) and VIntDClassInt - all three must + * be connected to the same voltage. + */ + REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), +}; + +struct regulator_init_data tps61052_regulator = { + .constraints = { + .name = "vaudio-hf", + .min_uV = 4500000, + .max_uV = 4500000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), + .consumer_supplies = tps61052_vaudio_consumers, +}; + static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* External displays, connector on board 2v5 power supply */ REGULATOR_SUPPLY("vaux12v5", "mcde.0"), diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index f979b892e4fa..94992158d962 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -17,5 +17,6 @@ extern struct ab8500_regulator_reg_init ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct regulator_init_data tps61052_regulator; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a10abc7d8eee..dc8746d7826e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -92,6 +93,15 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; +/* + * TPS61052 + */ + +static struct tps6105x_platform_data mop500_tps61052_data = { + .mode = TPS6105X_MODE_VOLTAGE, + .regulator_data = &tps61052_regulator, +}; + /* * TC35892 */ @@ -162,7 +172,7 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = { .clock_mode = LP5521_CLOCK_EXT, }; -static struct i2c_board_info mop500_i2c0_devices[] = { +static struct i2c_board_info __initdata mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc3589x", 0x42), .irq = NOMADIK_GPIO_TO_IRQ(217), @@ -170,6 +180,14 @@ static struct i2c_board_info mop500_i2c0_devices[] = { }, }; +/* I2C0 devices only available prior to HREFv60 */ +static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = { + { + I2C_BOARD_INFO("tps61052", 0x33), + .platform_data = &mop500_tps61052_data, + }, +}; + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -432,6 +450,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, ARRAY_SIZE(mop500_i2c0_devices)); + if (!machine_is_hrefv60()) + i2c_register_board_info(0, mop500_i2c0_old_devices, + ARRAY_SIZE(mop500_i2c0_old_devices)); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); } -- 2.39.5