From cdaea6224827fbedd338fa83ba79332c0623483d Mon Sep 17 00:00:00 2001 From: lothar Date: Fri, 23 Dec 2011 09:17:30 +0000 Subject: [PATCH] *** empty log message *** --- config/TX37-50x0.ecc | 10264 ---------------------------------------- config/TX53-1xx1.ecc | 10364 ----------------------------------------- config/TX53-1xx2.ecc | 10364 ----------------------------------------- 3 files changed, 30992 deletions(-) delete mode 100644 config/TX37-50x0.ecc delete mode 100644 config/TX53-1xx1.ecc delete mode 100644 config/TX53-1xx2.ecc diff --git a/config/TX37-50x0.ecc b/config/TX37-50x0.ecc deleted file mode 100644 index 226da56f..00000000 --- a/config/TX37-50x0.ecc +++ /dev/null @@ -1,10264 +0,0 @@ -# eCos saved configuration - -# ---- commands -------------------------------------------------------- -# This section contains information about the savefile format. -# It should not be edited. Any modifications made to this section -# may make it impossible for the configuration tools to read -# the savefile. - -cdl_savefile_version 1; -cdl_savefile_command cdl_savefile_version {}; -cdl_savefile_command cdl_savefile_command {}; -cdl_savefile_command cdl_configuration { description hardware template package }; -cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value }; - -# ---- toplevel -------------------------------------------------------- -# This section defines the toplevel configuration object. The only -# values that can be changed are the name of the configuration and -# the description field. It is not possible to modify the target, -# the template or the set of packages simply by editing the lines -# below because these changes have wide-ranging effects. Instead -# the appropriate tools should be used to make such modifications. - -cdl_configuration eCos { - description "" ; - - # These fields should not be modified. - hardware tx37karo ; - template redboot ; - package -hardware CYGPKG_HAL_ARM current ; - package -hardware CYGPKG_HAL_ARM_MX37 current ; - package -hardware CYGPKG_HAL_ARM_TX37KARO current ; - package -template CYGPKG_HAL current ; - package -template CYGPKG_INFRA current ; - package -template CYGPKG_REDBOOT current ; - package -template CYGPKG_ISOINFRA current ; - package -template CYGPKG_LIBC_STRING current ; - package -template CYGPKG_CRC current ; - package -hardware CYGPKG_IO_ETH_DRIVERS current ; - package -hardware CYGPKG_DEVS_ETH_ARM_TX37 current ; - package -hardware CYGPKG_DEVS_ETH_FEC current ; - package -hardware CYGPKG_COMPRESS_ZLIB current ; - package -hardware CYGPKG_IO_FLASH current ; - package -hardware CYGPKG_DEVS_FLASH_ONMXC current ; - package -template CYGPKG_MEMALLOC current ; - package -template CYGPKG_DEVS_ETH_PHY current ; - package -template CYGPKG_LIBC_I18N current ; - package -template CYGPKG_LIBC_STDLIB current ; - package -template CYGPKG_ERROR current ; -}; - -# ---- conflicts ------------------------------------------------------- -# There are no conflicts. - -# ---- contents -------------------------------------------------------- -# > -# > -# Global build options -# Global build options including control over -# compiler flags, linker flags and choice of toolchain. -# -cdl_component CYGBLD_GLOBAL_OPTIONS { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Global command prefix -# This option specifies the command prefix used when -# invoking the build tools. -# -cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value arm-1136jfs-linux-gnu - # value_source default - # Default value: arm-1136jfs-linux-gnu -}; - -# Global compiler flags -# This option controls the global compiler flags which are used to -# compile all packages by default. Individual packages may define -# options which override these global flags. -# -cdl_option CYGBLD_GLOBAL_CFLAGS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # value_source default - # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS - # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror") - # option CYGBLD_INFRA_CFLAGS_PIPE - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe") -}; - -# Global linker flags -# This option controls the global linker flags. Individual -# packages may define options which override these global flags. -# -cdl_option CYGBLD_GLOBAL_LDFLAGS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" - # value_source default - # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" -}; - -# Build common GDB stub ROM image -# Unless a target board has specific requirements to the -# stub implementation, it can use a simple common stub. -# This option, which gets enabled by platform HALs as -# appropriate, controls the building of the common stub. -# -cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 -}; - -# < -# ISO C library string functions -# doc: ref/libc.html -# This package provides string functions specified by the -# ISO C standard - ISO/IEC 9899:1990. -# -cdl_package CYGPKG_LIBC_STRING { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "" - # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "" - # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "" - # CYGBLD_ISO_STRING_STRFUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "" - # CYGBLD_ISO_STRTOK_R_HEADER == - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# > -# Inline versions of functions -# This option chooses whether some of the -# particularly simple string functions from -# are available as inline -# functions. This may improve performance, and as -# the functions are small, may even improve code -# size. -# -cdl_option CYGIMP_LIBC_STRING_INLINES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Optimize string functions for code size -# This option tries to reduce string function -# code size at the expense of execution speed. The -# same effect can be produced if the code is -# compiled with the -Os option to the compiler. -# -cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide BSD compatibility functions -# Enabling this option causes various compatibility functions -# commonly found in the BSD UNIX operating system to be included. -# These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp, -# strncasecmp, index, rindex and swab. -# -cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "" - # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == - # --> 1 - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 -}; - -# strtok -# These options control the behaviour of the -# strtok() and strtok_r() string tokenization -# functions. -# -cdl_component CYGPKG_LIBC_STRING_STRTOK { - # There is no associated value. -}; - -# > -# Per-thread strtok() -# This option controls whether the string function -# strtok() has its state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Note there is also a POSIX-standard strtok_r() -# function to achieve a similar effect with user -# support. Enabling this option will use one slot -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Tracing level -# Trace verbosity level for debugging the -# functions strtok() and strtok_r(). Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# < -# strdup -# This option indicates whether strdup() is to be supported. -# -cdl_option CYGFUN_LIBC_STRING_STRDUP { - # ActiveIf constraint: CYGINT_ISO_MALLOC - # CYGINT_ISO_MALLOC == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# C library string functions build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_STRING_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library string function tests -# This option specifies the set of tests for the C library -# string functions. -# -cdl_option CYGPKG_LIBC_STRING_TESTS { - # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2" - # Flavor: data - # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2 -}; - -# < -# < -# Common ethernet support -# doc: ref/io-eth-drv-generic.html -# Platform independent ethernet drivers -# -cdl_package CYGPKG_IO_ETH_DRIVERS { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_NETWORKING - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_ARM_TX37 - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_FEC - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_PHY - # ActiveIf: CYGPKG_IO_ETH_DRIVERS -}; - -# > -# Network drivers -# -cdl_interface CYGHWR_NET_DRIVERS { - # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE - # ActiveIf: CYGHWR_NET_DRIVERS > 1 - # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE - # ActiveIf: CYGHWR_NET_DRIVERS > 1 -}; - -# Driver supports multicast addressing -# This interface defines whether or not a driver can handle -# requests for multicast addressing. -# -cdl_interface CYGINT_IO_ETH_MULTICAST { - # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# Support printing driver debug information -# Selecting this option will include code to allow the driver to -# print lots of information on diagnostic output such as full -# packet dumps. -# -cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Driver debug output verbosity -# The value of this option indicates the default verbosity -# level of debugging output. 0 means no debugging output -# is made by default. Higher values indicate higher verbosity. -# The verbosity level may also be changed at run time by -# changing the variable cyg_io_eth_net_debug. -# -cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Size of scatter-gather I/O lists -# A scatter-gather list is used to pass requests to/from -# the physical device driver. This list can typically be -# small, as the data is normally already packed into reasonable -# chunks. -# -cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 -}; - -# Support for standard eCos TCP/IP stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_NET { - # This option is not active - # ActiveIf constraint: CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 -}; - -# > -# Warn when there are no more mbufs -# Warnings about running out of mbufs are printed to the -# diagnostic output channel via diag_printf() if this option -# is enabled. Mbufs are the network stack's basic dynamic -# memory objects that hold all packets in transit; running -# out is bad for performance but not fatal, not a crash. -# You might want to turn off the warnings to preserve realtime -# properties of the system even in extremis. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Simulate network failures for testing -# This package contains a suite of simulated failure modes -# for the ethernet device layer, including dropping and/or -# corrupting received packets, dropping packets queued for -# transmission, and simulating a complete network break. -# It requires the kernel as a source of time information. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Drop incoming packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Corrupt incoming packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Drop outgoing packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Simulate a line cut from time to time -# This option causes the system to drop all packets for a -# short random period (10s of seconds), and then act -# normally for up to 4 times that long. This simulates your -# sysadmin fiddling with plugs in the network switch -# cupboard. -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# < -# Support for stand-alone network stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE { - # ActiveIf constraint: !CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 -}; - -# > -# Pass packets to an alternate stack -# Define this to allow packets seen by this layer to be -# passed on to the previous logical layer, i.e. when -# stand-alone processing replaces system (eCos) processing. -# -cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 0 != CYGPKG_REDBOOT_NETWORKING - # CYGPKG_REDBOOT_NETWORKING == 1 - # --> 1 -}; - -# Number of [network] buffers -# This option is used to allocate space to buffer incoming network -# packets. These buffers are used to hold data until they can be -# logically processed by higher layers. -# -cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 - # Legal values: 2 to 32 -}; - -# Show driver warnings -# Selecting this option will allows the stand-alone ethernet driver -# to display warnings on the system console when incoming network -# packets are being discarded due to lack of buffer space. -# -cdl_option CYGSEM_IO_ETH_DRIVERS_WARN { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Support for lwIP network stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP { - # This option is not active - # ActiveIf constraint: CYGPKG_NET_LWIP - # CYGPKG_NET_LWIP (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: !CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 1 -}; - -# Interrupt support required -# This interface is used to indicate to the low -# level device drivers that interrupt driven operation -# is required by higher layers. -# -cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED { - # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled - # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value -}; - -# Common ethernet support build options -# -cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the common ethernet support package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D_KERNEL -D__ECOS" - # value_source default - # Default value: "-D_KERNEL -D__ECOS" -}; - -# < -# Ethernet driver for Ka-Ro electronics TX37 processor module -# -cdl_package CYGPKG_DEVS_ETH_ARM_TX37 { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# FEC ethernet driver required -# -cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED { - # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # package CYGPKG_DEVS_ETH_FEC - # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED -}; - -# Ka-Ro TX37 ethernet port driver -# This option includes the ethernet device driver for the -# MXC Board port. -# -cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1 - # --> 1 - # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700 - # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1 - # --> 1 -}; - -# > -# Device name for the ETH0 ethernet driver -# This option sets the name of the ethernet device. -# -cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"eth0\"" - # value_source default - # Default value: "\"eth0\"" -}; - -# OUI part of MAC address -# This option sets OUI part (manufacturer ID) of the MAC address -# for validation. -# -cdl_option CYGDAT_DEVS_ETH_ARM_TX37KARO_OUI { - # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "{ 0x00, 0x0c, 0xc6 }" - # value_source default - # Default value: "{ 0x00, 0x0c, 0xc6 }" -}; - -# < -# < -# Driver for fast ethernet controller. -# Driver for fast ethernet controller. -# -cdl_package CYGPKG_DEVS_ETH_FEC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED - # CYGINT_DEVS_ETH_FEC_REQUIRED == 1 - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# MXC FEC ethernet driver build options -# -cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the Cirrus Logic ethernet driver package. -# These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D_KERNEL -D__ECOS" - # value_source default - # Default value: "-D_KERNEL -D__ECOS" -}; - -# < -# MXC FEC MII Gasket for RMII mode -# This option enables the use of the MII Gasket for -# RMII mode found in i.MX25 and i.MX53 processors. -# -cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK { - # This option is not active - # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53 - # CYGPKG_HAL_ARM_MX25 (unknown) == 0 - # CYGPKG_HAL_ARM_MX53 (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Ethernet transceiver (PHY) support -# API for ethernet PHY devices -# -cdl_package CYGPKG_DEVS_ETH_PHY { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 -}; - -# > -# Enable driver debugging -# Enables the diagnostic debug messages on the -# console device. -# -cdl_option CYGDBG_DEVS_ETH_PHY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Time period (seconds) to wait for auto-negotiation -# The length of time to wait for auto-negotiation to complete -# before giving up and declaring the link dead/missing. -# -cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 5 - # value_source default - # Default value: 5 -}; - -# NSDP83847 -# Include support for National Semiconductor DP83847 DsPHYTER II -# -cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# AMD 79C874 -# Include support for AMD 79C874 NetPHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Intel LXT972 -# Include support for Intel LXT972xxx PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1890 -# Include support for ICS 1890 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1892 -# Include support for ICS 1892 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1893 -# Include support for ICS 1893 and 1893AF PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Davicom DM9161A -# Include support for the Davicom DM9161A PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Micrel KS8721 -# Include support for the Micrel KS8721 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# SMSC LAN8700 -# Include support for SMSC LAN8700 NetPHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 - # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700 -}; - -# < -# < -# ISO C library internationalization functions -# doc: ref/libc.html -# This package provides internationalization functions specified by the -# ISO C standard - ISO/IEC 9899:1990. These include locale-related -# functionality and functionality. -# -cdl_package CYGPKG_LIBC_I18N { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# > -# Supported locales -# These options determine which locales other than the "C" locale -# are supported and hence contribute to the size of the executable. -# -cdl_component CYGPKG_LIBC_I18N_LOCALES { - # There is no associated value. -}; - -# > -# Support for multiple locales required -# -cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED { - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "" - # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0 - # --> 0 - - # The following properties are affected by this value -}; - -# C-SJIS locale support -# This option controls if the "C-SJIS" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese SJIS multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# C-JIS locale support -# This option controls if the "C-JIS" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese JIS multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# C-EUCJP locale support -# This option controls if the "C-EUCJP" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese EUCJP multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# < -# Newlib's ctype implementation -# This option enables the implementation of the ctype functions -# that comes with newlib. It is table driven and therefore -# exhibits different performance characteristics. It also offers -# a limited amount of binary compatibility -# with newlib so that programs linked against newlib ctype/locale -# do not need to be recompiled when linked with eCos. -# -cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # CYGBLD_ISO_CTYPE_HEADER == - # --> 0 -}; - -# Per-thread multibyte state -# This option controls whether the multibyte character -# handling functions mblen(), mbtowc(), and wctomb(), -# have their state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Enabling this option will use three slots -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGVAR_KERNEL_THREADS_DATA != 0 - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Size of locale name strings -# This option controls the maximum size of -# locale names and is used, among other things -# to instantiate a static string used -# as a return value from the -# setlocale() function. When requesting the -# current locale settings with LC_ALL, a string -# must be constructed to contain this data, rather -# than just returning a constant string. This -# string data is stored in the static string. -# This depends on the length of locale names, -# hence this option. If just the C locale is -# present, this option can be set as low as 2. -# -cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 2 - # value_source default - # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) - # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0 - # --> 2 - # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0 -}; - -# Inline versions of functions -# This option chooses whether the simple character -# classification and conversion functions (e.g. -# isupper(), isalpha(), toupper(), etc.) -# from are available as inline -# functions. This may improve performance and as -# the functions are small, may even improve code -# size. -# -cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # CYGBLD_ISO_CTYPE_HEADER == - # --> 1 -}; - -# C library i18n functions build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_I18N_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library i18n function tests -# This option specifies the set of tests for the C library -# i18n functions. -# -cdl_option CYGPKG_LIBC_I18N_TESTS { - # Calculated value: "tests/ctype tests/setlocale tests/i18nmb" - # Flavor: data - # Current_value: tests/ctype tests/setlocale tests/i18nmb -}; - -# < -# < -# ISO C library general utility functions -# doc: ref/libc.html -# This package provides general utility functions in -# as specified by the ISO C standard - ISO/IEC 9899:1990. -# -cdl_package CYGPKG_LIBC_STDLIB { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 -}; - -# > -# Inline versions of functions -# This option chooses whether some of the -# particularly simple standard utility functions -# from are available as inline -# functions. This may improve performance, and as -# the functions are small, may even improve code -# size. -# -cdl_component CYGIMP_LIBC_STDLIB_INLINES { - # There is no associated value. -}; - -# > -# abs() / labs() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "" - # CYGBLD_ISO_STDLIB_ABS_HEADER == - # --> 1 -}; - -# div() / ldiv() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "" - # CYGBLD_ISO_STDLIB_DIV_HEADER == - # --> 1 -}; - -# atof() / atoi() / atol() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "" - # CYGBLD_ISO_STDLIB_STRCONV_HEADER == - # --> 1 -}; - -# < -# Random number generation -# These options control the behaviour of the -# functions rand(), srand() and rand_r() -# -cdl_component CYGPKG_LIBC_RAND { - # There is no associated value. -}; - -# > -# Per-thread random seed -# doc: ref/libc-thread-safety.html -# This option controls whether the pseudo-random -# number generation functions rand() and srand() -# have their state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Note there is also a POSIX-standard rand_r() -# function to achieve a similar effect with user -# support. Enabling this option will use one slot -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_PER_THREAD_RAND { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Random number seed -# This selects the initial random number seed for -# rand()'s pseudo-random number generator. For -# strict ISO standard compliance, this should be 1, -# as per section 7.10.2.2 of the standard. -# -cdl_option CYGNUM_LIBC_RAND_SEED { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Legal values: 0 to 0x7fffffff -}; - -# Tracing level -# Trace verbosity level for debugging the rand(), -# srand() and rand_r() functions. Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# Simplest implementation -# This provides a very simple implementation of rand() -# that does not perform well with randomness in the -# lower significant bits. However it is exceptionally -# fast. It uses the sample algorithm from the ISO C -# standard itself. -# -cdl_option CYGIMP_LIBC_RAND_SIMPLEST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Simple implementation #1 -# This provides a very simple implementation of rand() -# based on the simplest implementation above. However -# it does try to work around the lack of randomness -# in the lower significant bits, at the expense of a -# little speed. -# -cdl_option CYGIMP_LIBC_RAND_SIMPLE1 { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# Knuth implementation #1 -# This implements a slightly more complex algorithm -# published in Donald E. Knuth's Art of Computer -# Programming Vol.2 section 3.6 (p.185 in the 3rd ed.). -# This produces better random numbers than the -# simplest approach but is slower. -# -cdl_option CYGIMP_LIBC_RAND_KNUTH1 { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 -}; - -# < -# Provides strtod() -# This option allows use of the utility function -# strtod() (and consequently atof()) to convert -# from string to double precision floating point -# numbers. Disabling this option removes the -# dependency on the math library package. -# -cdl_option CYGFUN_LIBC_strtod { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 != CYGPKG_LIBM - # CYGPKG_LIBM (unknown) == 0 - # --> 0 - # Requires: CYGPKG_LIBM - # CYGPKG_LIBM (unknown) == 0 - # --> 0 -}; - -# Provides long long conversion functions -# Enabling this option will provide support for the strtoll(), -# strtoull() and atoll() conversion functions, which are -# the long long variants of the standard versions of these -# functions. Supporting this requires extra code and compile -# time. -# -cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# bsearch() tracing level -# Trace verbosity level for debugging the -# binary search function bsearch(). Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# qsort() tracing level -# Trace verbosity level for debugging the -# quicksort function qsort(). Increase this value -# to get additional trace output. -# -cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# C library stdlib build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_STDLIB_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library stdlib tests -# This option specifies the set of tests for this package. -# -cdl_option CYGPKG_LIBC_STDLIB_TESTS { - # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul" - # Flavor: data - # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul -}; - -# < -# < -# < -# eCos HAL -# doc: ref/the-ecos-hardware-abstraction-layer.html -# The eCos HAL package provide a porting layer for -# higher-level parts of the system such as the kernel and the -# C library. Each installation should have HAL packages for -# one or more architectures, and for each architecture there -# may be one or more supported platforms. It is necessary to -# select one target architecture and one platform for that -# architecture. There are also a number of configuration -# options that are common to all HAL packages. -# -cdl_package CYGPKG_HAL { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_INFRA - # CYGPKG_INFRA == current - # --> 1 - - # The following properties are affected by this value -}; - -# > -# Platform-independent HAL options -# A number of configuration options are common to most or all -# HAL packages, for example options controlling how much state -# should be saved during a context switch. The implementations -# of these options will vary from architecture to architecture. -# -cdl_component CYGPKG_HAL_COMMON { - # There is no associated value. -}; - -# > -# Provide eCos kernel support -# The HAL can be configured to either support the full eCos -# kernel, or to support only very simple applications which do -# not require a full kernel. If kernel support is not required -# then some of the startup, exception, and interrupt handling -# code can be eliminated. -# -cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - # Requires: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 -}; - -# HAL exception support -# When a processor exception occurs, for example an attempt to -# execute an illegal instruction or to perform a divide by -# zero, this exception may be handled in a number of different -# ways. If the target system has gdb support then typically -# the exception will be handled by gdb code. Otherwise if the -# HAL exception support is enabled then the HAL will invoke a -# routine deliver_exception(). Typically this routine will be -# provided by the eCos kernel, but it is possible for -# application code to provide its own implementation. If the -# HAL exception support is not enabled and a processor -# exception occurs then the behaviour of the system is -# undefined. -# -cdl_option CYGPKG_HAL_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_KERNEL_EXCEPTIONS - # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0 - # --> 0 - # Requires: CYGPKG_KERNEL_EXCEPTIONS - # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0 - # --> 0 -}; - -# Stop calling constructors early -# This option supports environments where some constructors -# must be run in the context of a thread rather than at -# simple system startup time. A boolean flag named -# cyg_hal_stop_constructors is set to 1 when constructors -# should no longer be invoked. It is up to some other -# package to deal with the rest of the constructors. -# In the current version this is only possible with the -# C library. -# -cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS - # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0 - # --> 0 -}; - -# HAL uses the MMU and allows for CDL manipulation of it's use -# -cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_HAL_INSTALL_MMU_TABLES - # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES -}; - -# Install MMU tables. -# This option controls whether this application installs -# its own Memory Management Unit (MMU) tables, or relies on the -# existing environment to run. -# -cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES - # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYG_HAL_STARTUP != "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_STATIC_MMU_TABLES - # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES -}; - -# Use static MMU tables. -# This option defines an environment where any Memory -# Management Unit (MMU) tables are constant. Normally used by ROM -# based environments, this provides a way to save RAM usage which -# would otherwise be required for these tables. -# -cdl_option CYGSEM_HAL_STATIC_MMU_TABLES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES - # CYGSEM_HAL_INSTALL_MMU_TABLES == 0 - # --> 0 -}; - -# Route diagnostic output to debug channel -# If not inheriting the console setup from the ROM monitor, -# it is possible to redirect diagnostic output to the debug -# channel by enabling this option. Depending on the debugger -# used it may also be necessary to select a mangler for the -# output to be displayed by the debugger. -# -cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN { - # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0 - # --> 1 - # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # CYGPKG_HAL_ARM == current - # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0 - # CYGPKG_HAL_V85X_V850 (unknown) == 0 - # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # The following properties are affected by this value - # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN -}; - -# > -# Mangler used on diag output -# It is sometimes necessary to mangle (encode) the -# diag ASCII text output in order for it to show up at the -# other end. In particular, GDB may silently ignore raw -# ASCII text. -# -cdl_option CYGSEM_HAL_DIAG_MANGLER { - # This option is not active - # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value GDB - # value_source default - # Default value: GDB - # Legal values: "GDB" "None" -}; - -# < -# < -# HAL interrupt handling -# A number of configuration options related to interrupt -# handling are common to most or all HAL packages, even though -# the implementations will vary from architecture to -# architecture. -# -cdl_component CYGPKG_HAL_COMMON_INTERRUPTS { - # There is no associated value. -}; - -# > -# Use separate stack for interrupts -# When an interrupt occurs this interrupt can be handled either -# on the current stack or on a separate stack maintained by the -# HAL. Using a separate stack requires a small number of extra -# instructions in the interrupt handling code, but it has the -# advantage that it is no longer necessary to allow extra space -# in every thread stack for the interrupt handlers. The amount -# of extra space required depends on the interrupt handlers -# that are being used. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # package CYGPKG_REDBOOT - # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 -}; - -# Interrupt stack size -# This configuration option specifies the stack size in bytes -# for the interrupt stack. Typically this should be a multiple -# of 16, but the exact requirements will vary from architecture -# to architecture. The interrupt stack serves two separate -# purposes. It is used as the stack during system -# initialization. In addition, if the interrupt system is -# configured to use a separate stack then all interrupts will -# be processed on this stack. The exact memory requirements -# will vary from application to application, and will depend -# heavily on whether or not other interrupt-related options, -# for example nested interrupts, are enabled. On most targets, -# in a configuration with no kernel this stack will also be -# the stack used to invoke the application, and must obviously -# be appropriately large in that case. -# -cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32768 - # value_source default - # Default value: CYGPKG_KERNEL ? 4096 : 32768 - # CYGPKG_KERNEL (unknown) == 0 - # --> 32768 - # Legal values: 128 to 1048576 -}; - -# Allow nested interrupts -# When an interrupt occurs the HAL interrupt handling code can -# either leave interrupts disabled for the duration of the -# interrupt handling code, or by doing some extra work it can -# reenable interrupts before invoking the interrupt handler and -# thus allow nested interrupts to happen. If all the interrupt -# handlers being used are small and do not involve any loops -# then it is usually better to disallow nested interrupts. -# However if any of the interrupt handlers are more complicated -# than nested interrupts will usually be required. -# -cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Save minimum context on interrupt -# The HAL interrupt handling code can exploit the calling conventions -# defined for a given architecture to reduce the amount of state -# that has to be saved. Generally this improves performance and -# reduces code size. However it can make source-level debugging -# more difficult. -# -cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT -}; - -# Chain all interrupts together -# Interrupts can be attached to vectors either singly, or be -# chained together. The latter is necessary if there is no way -# of discovering which device has interrupted without -# inspecting the device itself. It can also reduce the amount -# of RAM needed for interrupt decoding tables and code. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Ignore spurious [fleeting] interrupts -# On some hardware, interrupt sources may not be de-bounced or -# de-glitched. Rather than try to handle these interrupts (no -# handling may be possible), this option allows the HAL to simply -# ignore them. In most cases, if the interrupt is real it will -# reoccur in a detectable form. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# HAL context switch support -# A number of configuration options related to thread contexts -# are common to most or all HAL packages, even though the -# implementations will vary from architecture to architecture. -# -cdl_component CYGPKG_HAL_COMMON_CONTEXT { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Use minimum thread context -# The thread context switch code can exploit the calling -# conventions defined for a given architecture to reduce the -# amount of state that has to be saved during a context -# switch. Generally this improves performance and reduces -# code size. However it can make source-level debugging more -# difficult. -# -cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM -}; - -# < -# Explicit control over cache behaviour -# These options let the default behaviour of the caches -# be easily configurable. -# -cdl_component CYGPKG_HAL_CACHE_CONTROL { - # There is no associated value. -}; - -# > -# Enable DATA cache on startup -# Enabling this option will cause the data cache to be enabled -# as soon as practicable when eCos starts up. One would choose -# to disable this if the data cache cannot safely be turned on, -# such as a case where the cache(s) require additional platform -# specific setup. -# -cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# DATA cache mode on startup -# This option controls the mode the cache will be set to -# when enabled on startup. -# -cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value COPYBACK - # value_source default - # Default value: COPYBACK - # Legal values: "COPYBACK" "WRITETHRU" -}; - -# < -# Enable INSTRUCTION cache on startup -# Enabling this option will cause the instruction cache to be enabled -# as soon as practicable when eCos starts up. One would choose -# to disable this if the instruction cache cannot safely be turned on, -# such as a case where the cache(s) require additional platform -# specific setup. -# -cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Source-level debugging support -# If the source level debugger gdb is to be used for debugging -# application code then it may be necessary to configure in support -# for this in the HAL. -# -cdl_component CYGPKG_HAL_DEBUG { - # There is no associated value. -}; - -# > -# Support for GDB stubs -# The HAL implements GDB stubs for the target. -# -cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS { - # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS -}; - -# Include GDB stubs in HAL -# This option causes a set of GDB stubs to be included into the -# system. On some target systems the GDB support will be -# provided by other means, for example by a ROM monitor. On -# other targets, especially when building a ROM-booting system, -# the necessary support has to go into the target library -# itself. When GDB stubs are include in a configuration, HAL -# serial drivers must also be included. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS - # CYGINT_HAL_DEBUG_GDB_STUBS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 0 - # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0 - # --> 1 - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGBLD_BUILD_COMMON_GDB_STUBS - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGPKG_HAL_GDB_FILEIO - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS - # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS -}; - -# Support for external break support in GDB stubs -# The HAL implements external break (or asynchronous interrupt) -# in the GDB stubs for the target. -# -cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK { - # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK -}; - -# Include GDB external break support for stubs -# This option causes the GDB stub to add a serial interrupt handler -# which will listen for GDB break packets. This lets you stop the -# target asynchronously when using GDB, usually by hitting Control+C -# or pressing the STOP button. This option differs from -# CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when -# GDB stubs are present. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK - # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT -}; - -# Platform does not support CTRLC -# -cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 -}; - -# Include GDB external break support when no stubs -# This option adds an interrupt handler for the GDB serial line -# which will listen for GDB break packets. This lets you stop the -# target asynchronously when using GDB, usually by hitting Control+C -# or pressing the STOP button. This option differs from -# CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB -# stubs are NOT present. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT { - # This option is not active - # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 - # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 - # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT -}; - -# Include GDB multi-threading debug support -# This option enables some extra HAL code which is needed -# to support multi-threaded source level debugging. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT { - # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # CYGSEM_HAL_ROM_MONITOR == 1 - # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # option CYGBLD_BUILD_REDBOOT_WITH_THREADS - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT -}; - -# Number of times to retry sending a $O packet -# This option controls the number of attempts that eCos programs -# will make to send a $O packet to a host GDB process. If it is -# set non-zero, then the target process will attempt to resend the -# $O packet data up to this number of retries. Caution: use of -# this option is not recommended as it can thoroughly confuse the -# host GDB process. -# -cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Timeout period for GDB packets -# This option controls the time (in milliseconds) that eCos programs -# will wait for a response when sending packets to a host GDB process. -# If this time elapses, then the packet will be resent, up to some -# maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES). -# -cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 500 - # value_source default - # Default value: 500 -}; - -# Location of CRC32 table -# The stubs use a 1 kilobyte CRC table that can either be pregenerated -# and placed in ROM, or generated at runtime in RAM. Depending on -# your memory constraints, one of these options may be better. -# -cdl_option CYGDBG_HAL_CRCTABLE_LOCATION { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value RAM - # value_source default - # Default value: RAM - # Legal values: "ROM" "RAM" -}; - -# < -# ROM monitor support -# Support for ROM monitors can be built in to your application. -# It may also be relevant to build your application as a ROM monitor -# itself. Such options are contained here if relevant for your chosen -# platform. The options and ROM monitors available to choose are -# platform-dependent. -# -cdl_component CYGPKG_HAL_ROM_MONITOR { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Target has virtual vector support -# -cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT { - # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT -}; - -# Target supports baud rate control via vectors -# Whether this target supports the __COMMCTL_GETBAUD -# and __COMMCTL_SETBAUD virtual vector comm control operations. -# -cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT { - # Implemented by CYGPKG_HAL_ARM_MX37, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE - # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT -}; - -# Enable use of virtual vector calling interface -# Virtual vector support allows the HAL to let the ROM -# monitor handle certain operations. The virtual vector table -# defines a calling interface between applications running in -# RAM and the ROM monitor. -# -cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT { - # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # package CYGPKG_DEVS_ETH_PHY - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT -}; - -# > -# Inherit console settings from ROM monitor -# When this option is set, the application will inherit -# the console as set up by the ROM monitor. This means -# that the application will use whatever channel and -# mangling style was used by the ROM monitor when -# the application was launched. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE { - # This option is not active - # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 0 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN -}; - -# Debug channel is configurable -# This option is a configuration hint - it is enabled -# when the HAL initialization code will make use -# of the debug channel configuration option. -# -cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE { - # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL - # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE -}; - -# Console channel is configurable -# This option is a configuration hint - it is enabled -# when the HAL initialization code will make use -# of the console channel configuration option. -# -cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE { - # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0 - # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE -}; - -# Initialize whole of virtual vector table -# This option will cause the whole of the virtual -# vector table to be initialized with dummy values on -# startup. When this option is enabled, all the -# options below must also be enabled - or the -# table would be empty when the application -# launches. -# On targets where older ROM monitors without -# virtual vector support may still be in use, it is -# necessary for RAM applictions to initialize the -# table (since all HAL diagnostics and debug IO -# happens via the table). -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR - # CYG_HAL_STARTUP == ROMRAM - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS -}; - -# Claim virtual vector table entries by default -# By default most virtual vectors will be claimed by -# RAM startup configurations, meaning that the RAM -# application will provide the services. The -# exception is COMMS support (HAL -# diagnostics/debugging IO) which is left in the -# control of the ROM monitor. -# The reasoning behind this is to get as much of the -# code exercised during regular development so it -# is known to be working the few times a new ROM -# monitor or a ROM production configuration is used -# - COMMS are excluded only by necessity in order to -# avoid breaking an existing debugger connections -# (there may be ways around this). -# For production RAM configurations this option can -# be switched off, causing the appliction to rely on -# the ROM monitor for these services, thus -# saving some space. -# Individual vectors may also be left unclaimed, -# controlled by the below options (meaning that the -# associated service provided by the ROM monitor -# will be used). -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT { - # This option is not active - # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT -}; - -# Claim reset virtual vectors -# This option will cause the reset and kill_by_reset -# virtual vectors to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET -}; - -# Claim version virtual vectors -# This option will cause the version -# virtual vectors to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # --> 1 -}; - -# Claim delay_us virtual vector -# This option will cause the delay_us -# virtual vector to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US -}; - -# Claim cache virtual vectors -# This option will cause the cache virtual vectors -# to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE -}; - -# Claim data virtual vectors -# This option will cause the data virtual vectors -# to be claimed. At present there is only one, used -# by the RedBoot ethernet driver to share diag output. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA -}; - -# Claim comms virtual vectors -# This option will cause the communication tables -# that are part of the virtual vectors mechanism to -# be claimed. Note that doing this may cause an -# existing ROM monitor communication connection to -# be closed. For this reason, the option is disabled -# per default for normal application -# configurations. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE - # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS -}; - -# Do diagnostic IO via virtual vector table -# All HAL IO happens via the virtual vector table / comm -# tables when those tables are supported by the HAL. -# If so desired, the low-level IO functions can -# still be provided by the RAM application by -# enabling the CLAIM_COMMS option. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG { - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS -}; - -# < -# Behave as a ROM monitor -# Enable this option if this program is to be used as a ROM monitor, -# i.e. applications will be loaded into RAM on the TX37 module, and this -# ROM monitor may process exceptions or interrupts generated from the -# application. This enables features such as utilizing a separate -# interrupt stack when exceptions are generated. -# -cdl_option CYGSEM_HAL_ROM_MONITOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # CYG_HAL_STARTUP == ROMRAM - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) - # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # option CYGPRI_REDBOOT_ROM_MONITOR - # Requires: CYGSEM_HAL_ROM_MONITOR -}; - -# Work with a ROM monitor -# Support can be enabled for different varieties of ROM monitor. -# This support changes various eCos semantics such as the encoding -# of diagnostic output, or the overriding of hardware interrupt -# vectors. -# Firstly there is "Generic" support which prevents the HAL -# from overriding the hardware vectors that it does not use, to -# instead allow an installed ROM monitor to handle them. This is -# the most basic support which is likely to be common to most -# implementations of ROM monitor. -# "GDB_stubs" provides support when GDB stubs are included in -# the ROM monitor or boot ROM. -# -cdl_option CYGSEM_HAL_USE_ROM_MONITOR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 - # CYG_HAL_STARTUP == ROMRAM - # --> 0 0 - # Legal values: "Generic" "GDB_stubs" - # Requires: CYG_HAL_STARTUP == "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR -}; - -# < -# Platform defined I/O channels. -# Platforms which provide additional I/O channels can implement -# this interface, indicating that the function plf_if_init() -# needs to be called. -# -cdl_interface CYGINT_HAL_PLF_IF_INIT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Platform IDE I/O support. -# Platforms which provide IDE controllers can implement -# this interface, indicating that IDE I/O macros are -# available. -# -cdl_interface CYGINT_HAL_PLF_IF_IDE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_DISK_IDE - # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0 -}; - -# File I/O operations via GDB -# This option enables support for various file I/O -# operations using the GDB remote protocol to communicate -# with GDB. The operations are then performed on the -# debugging host by proxy. These operations are only -# currently available by using a system call interface -# to RedBoot. This may change in the future. -# -cdl_option CYGPKG_HAL_GDB_FILEIO { - # This option is not active - # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS - # CYGSEM_REDBOOT_BSP_SYSCALLS == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 -}; - -# Build Compiler sanity checking tests -# Enabling this option causes compiler tests to be built. -# -cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_HAL_TESTS - # Calculated: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") -}; - -# Common HAL tests -# This option specifies the set of tests for the common HAL. -# -cdl_component CYGPKG_HAL_TESTS { - # Calculated value: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") - # CYGINT_HAL_TESTS_NO_CACHES == 0 - # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0 - # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0 - # Flavor: data - # Current_value: tests/context tests/basic tests/cache tests/intr -}; - -# > -# Interface for cache presence -# Some architectures and/or platforms do not have caches. By -# implementing this interface, these can disable the various -# cache-related tests. -# -cdl_interface CYGINT_HAL_TESTS_NO_CACHES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value - # component CYGPKG_HAL_TESTS - # Calculated: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") -}; - -# < -# ARM architecture -# The ARM architecture HAL package provides generic -# support for this processor architecture. It is also -# necessary to select a specific target platform HAL -# package. -# -cdl_package CYGPKG_HAL_ARM { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED - # ActiveIf: CYGPKG_HAL_ARM -}; - -# > -# The CPU architecture supports THUMB mode -# -cdl_interface CYGINT_HAL_ARM_THUMB_ARCH { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_THUMB - # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0 -}; - -# Enable Thumb instruction set -# Enable use of the Thumb instruction set. -# -cdl_option CYGHWR_THUMB { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # CYGINT_HAL_ARM_THUMB_ARCH == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) -}; - -# Enable Thumb interworking compiler option -# This option controls the use of -mthumb-interwork in the -# compiler flags. It defaults enabled in Thumb or ROM monitor -# configurations, but can be overridden for reduced memory -# footprint where interworking is not a requirement. -# -cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # CYGINT_HAL_ARM_THUMB_ARCH == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) - # CYGHWR_THUMB == 0 - # CYGSEM_HAL_ROM_MONITOR == 1 - # --> 1 -}; - -# The platform and architecture supports Big Endian operation -# -cdl_interface CYGINT_HAL_ARM_BIGENDIAN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_BIGENDIAN - # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0 -}; - -# Use big-endian mode -# Use the CPU in big-endian mode. -# -cdl_option CYGHWR_HAL_ARM_BIGENDIAN { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0 - # CYGINT_HAL_ARM_BIGENDIAN == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# The platform uses a processor with an ARM7 core -# -cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with an ARM9 core -# -cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 { - # Implemented by CYGPKG_HAL_ARM_MX37, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with a StrongARM core -# -cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with a XScale core -# -cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# ARM CPU family -# It is possible to optimize code for different -# ARM CPU families. This option selects which CPU to -# optimize for on boards that support multiple CPU types. -# -cdl_option CYGHWR_HAL_ARM_CPU_FAMILY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value ARM9 - # value_source default - # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" - # CYGINT_HAL_ARM_ARCH_ARM7 == 0 - # CYGINT_HAL_ARM_ARCH_ARM9 == 1 - # CYGINT_HAL_ARM_ARCH_STRONGARM == 0 - # CYGINT_HAL_ARM_ARCH_XSCALE == 0 - # --> ARM9 - # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # CYGINT_HAL_ARM_ARCH_ARM7 == 0 - # CYGINT_HAL_ARM_ARCH_ARM9 == 1 - # CYGINT_HAL_ARM_ARCH_STRONGARM == 0 - # CYGINT_HAL_ARM_ARCH_XSCALE == 0 -}; - -# Provide diagnostic dump for exceptions -# Print messages about hardware exceptions, including -# raw exception frame dump and register contents. -# -cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 -}; - -# Process all exceptions with the eCos application -# Normal RAM-based programs which do not include GDB stubs -# defer processing of the illegal instruction exception to GDB. -# Setting this options allows the program to explicitly handle -# the illegal instruction exception itself. Note: this will -# prevent the use of GDB to debug the application as breakpoints -# will no longer work. -# -cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Support GDB thread operations via ICE/Multi-ICE -# Allow GDB to get thread information via the ICE/Multi-ICE -# connection. -# -cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1 - # --> 1 - # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0 - # --> 0 -}; - -# Support for 'gprof' callbacks -# The ARM HAL provides the macro for 'gprof' callbacks from RedBoot -# to acquire the interrupt-context PC and SP, when this option is -# active. -# -cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT { - # This option is not active - # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS - # CYGSEM_REDBOOT_BSP_SYSCALLS == 0 - # --> 0 - # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0 - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 0 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Accept exceptions and irq's occurring in user mode -# For standalone Redboot based programs running in user mode. -# -cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Preserve svc spsr before returning to svc mode -# This option secures exception and breakpoint processing -# triggered during execution of application specific SWI -# handlers. -# -cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Linker script -# -cdl_option CYGBLD_LINKER_SCRIPT { - # Calculated value: "src/arm.ld" - # Flavor: data - # Current_value: src/arm.ld -}; - -# Implementations of hal_arm_mem_real_region_top() -# -cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Freescale SoC architecture -# This HAL variant package provides generic -# support for the Freescale SoC. It is also -# necessary to select a specific target platform HAL -# package. -# -cdl_package CYGPKG_HAL_ARM_MX37 { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value -}; - -# > -# Processor clock rate -# The processor can run at various frequencies. -# These values are expressed in KHz. Note that there are -# several steppings of the rate to run at different -# maximum frequencies. Check the specs to make sure that your -# particular processor can run at the rate you select here. -# -cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK { - # This option is not active - # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 150000 - # value_source default - # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ? - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000 - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0 - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0 - # --> 150000 - # Legal values: 150000 200000 -}; - -# Real-time clock constants -# -cdl_component CYGNUM_HAL_RTC_CONSTANTS { - # There is no associated value. -}; - -# > -# Real-time clock numerator -# -cdl_option CYGNUM_HAL_RTC_NUMERATOR { - # Calculated value: 1000000000 - # Flavor: data - # Current_value: 1000000000 -}; - -# Real-time clock denominator -# This option selects the heartbeat rate for the real-time clock. -# The rate is specified in ticks per second. Change this value -# with caution - too high and your system will become saturated -# just handling clock interrupts, too low and some operations -# such as thread scheduling may become sluggish. -# -cdl_option CYGNUM_HAL_RTC_DENOMINATOR { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 100 - # value_source default - # Default value: 100 - - # The following properties are affected by this value - # option CYGNUM_HAL_RTC_PERIOD - # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR) -}; - -# Real-time clock period -# -cdl_option CYGNUM_HAL_RTC_PERIOD { - # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR) - # CYGNUM_HAL_RTC_DENOMINATOR == 100 - # Flavor: data - # Current_value: 36864 -}; - -# < -# UART1 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART1 { - # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART2 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART2 { - # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART3 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART3 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# UART4 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART4 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# UART5 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART5 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Ka-Ro TX37 module -# This HAL platform package provides generic -# support for the Ka-Ro electronics TX37 module. -# -cdl_package CYGPKG_HAL_ARM_TX37KARO { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - # Requires: CYGBLD_BUILD_REDBOOT == 1 - # CYGBLD_BUILD_REDBOOT == 1 - # --> 1 -}; - -# > -# Startup type -# The only startup type allowed is ROMRAM, since this will allow -# the program to exist in ROM, but be copied to RAM during startup -# which is required to boot from NAND flash. -# -cdl_component CYG_HAL_STARTUP { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value ROMRAM - # value_source default - # Default value: ROMRAM - # Legal values: "ROMRAM" - - # The following properties are affected by this value - # option CYGSEM_HAL_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGSEM_HAL_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGSEM_HAL_USE_ROM_MONITOR - # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 - # option CYGSEM_HAL_USE_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "RAM" - # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK - # ActiveIf: CYG_HAL_STARTUP == "ROM" - # option CYGSEM_HAL_INSTALL_MMU_TABLES - # DefaultValue: CYG_HAL_STARTUP != "RAM" - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR - # option CYGBLD_BUILD_REDBOOT_WITH_THREADS - # ActiveIf: CYG_HAL_STARTUP != "RAM" - # option CYGPRI_REDBOOT_ROM_MONITOR - # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGPRI_REDBOOT_ROM_MONITOR - # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" -}; - -# Diagnostic serial port baud rate -# This option selects the baud rate used for the console port. -# Note: this should match the value chosen for the GDB port if the -# console and GDB port are the same. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 115200 - # value_source default - # Default value: 115200 - # Legal values: 9600 19200 38400 57600 115200 -}; - -# GDB serial port baud rate -# This option selects the baud rate used for the GDB port. -# Note: this should match the value chosen for the console port if the -# console and GDB port are the same. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 115200 - # value_source default - # Default value: 115200 - # Legal values: 9600 19200 38400 57600 115200 -}; - -# Number of communication channels on the TX37 -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS { - # Calculated value: 2 - # Flavor: data - # Current_value: 2 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 -}; - -# Debug serial port -# The TX37 provides access to two serial ports. This option -# chooses which port will be used to connect to a host -# running GDB. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL { - # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE - # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2 -}; - -# Default console channel. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT { - # Calculated value: 0 - # Flavor: data - # Current_value: 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT -}; - -# Console serial port -# The TX37 provides access to two serial ports. This option -# chooses which port will be used for console output. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL { - # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT - # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0 - # --> 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2 -}; - -# Ka-Ro electronics TX37 module build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_HAL_ARM_TX37_OPTIONS { - # There is no associated value. - # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 -}; - -# > -# SDRAM size -# This option specifies the SDRAM size of the TX37 module. -# -cdl_option CYGNUM_HAL_ARM_TX37_SDRAM_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x08000000 - # value_source default - # Default value: 0x08000000 - # Legal values: 0x08000000 0x04000000 -}; - -# Enable low level debugging with LED -# This option enables low level debugging by blink codes -# of the LED on STK5. -# -cdl_option CYGOPT_HAL_ARM_TX37_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: false - # false (unknown) == 0 - # --> 0 -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the TX37 HAL. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_HAL_ARM_TX37_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the TX37 HAL. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_HAL_ARM_TX37_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# Memory layout -# -cdl_component CYGHWR_MEMORY_LAYOUT { - # Calculated value: "arm_tx37_romram" - # Flavor: data - # Current_value: arm_tx37_romram -}; - -# > -# Memory layout linker script fragment -# -cdl_option CYGHWR_MEMORY_LAYOUT_LDI { - # Calculated value: "" - # Flavor: data - # Current_value: -}; - -# Memory layout header file -# -cdl_option CYGHWR_MEMORY_LAYOUT_H { - # Calculated value: "" - # Flavor: data - # Current_value: -}; - -# < -# < -# < -# < -# < -# Infrastructure -# Common types and useful macros. -# Tracing and assertion facilities. -# Package startup options. -# -cdl_package CYGPKG_INFRA { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # package CYGPKG_HAL - # Requires: CYGPKG_INFRA - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGPKG_INFRA -}; - -# > -# Asserts & Tracing -# The eCos source code contains a significant amount of -# internal debugging support, in the form of assertions and -# tracing. -# Assertions check at runtime that various conditions are as -# expected; if not, execution is halted. -# Tracing takes the form of text messages that are output -# whenever certain events occur, or whenever functions are -# called or return. -# The most important property of these checks and messages is -# that they are not required for the program to run. -# It is prudent to develop software with assertions enabled, -# but disable them when making a product release, thus -# removing the overhead of that checking. -# It is possible to enable assertions and tracing -# independently. -# There are also options controlling the exact behaviour of -# the assertion and tracing facilities, thus giving users -# finer control over the code and data size requirements. -# -cdl_component CYGPKG_INFRA_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD - # ActiveIf: CYGPKG_INFRA_DEBUG -}; - -# > -# Use asserts -# If this option is defined, asserts in the code are tested. -# Assert functions (CYG_ASSERT()) are defined in -# 'include/cyg/infra/cyg_ass.h' within the 'install' tree. -# If it is not defined, these result in no additional -# object code and no checking of the asserted conditions. -# -cdl_component CYGDBG_USE_ASSERTS { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG - # Requires: CYGDBG_USE_ASSERTS - # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG - # DefaultValue: 0 != CYGDBG_USE_ASSERTS -}; - -# > -# Preconditions -# This option allows individual control of preconditions. -# A precondition is one type of assert, which it is -# useful to control separately from more general asserts. -# The function is CYG_PRECONDITION(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Postconditions -# This option allows individual control of postconditions. -# A postcondition is one type of assert, which it is -# useful to control separately from more general asserts. -# The function is CYG_POSTCONDITION(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Loop invariants -# This option allows individual control of loop invariants. -# A loop invariant is one type of assert, which it is -# useful to control separately from more general asserts, -# particularly since a loop invariant is typically evaluated -# a great many times when used correctly. -# The function is CYG_LOOP_INVARIANT(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use assert text -# All assertions within eCos contain a text message -# which should give some information about the condition -# being tested. -# These text messages will end up being embedded in the -# application image and hence there is a significant penalty -# in terms of image size. -# It is possible to suppress the use of these messages by -# disabling this option. -# This results in smaller code size, but there is less -# human-readable information if an assertion actually gets -# triggered. -# -cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Use tracing -# If this option is defined, tracing operations -# result in output or logging, depending on other options. -# This may have adverse effects on performance, if the time -# taken to output message overwhelms the available CPU -# power or output bandwidth. -# Trace functions (CYG_TRACE()) are defined in -# 'include/cyg/infra/cyg_trac.h' within the 'install' tree. -# If it is not defined, these result in no additional -# object code and no trace information. -# -cdl_component CYGDBG_USE_TRACING { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT - # ActiveIf: CYGDBG_USE_TRACING -}; - -# > -# Trace function reports -# This option allows individual control of -# function entry/exit tracing, independent of -# more general tracing output. -# This may be useful to remove clutter from a -# trace log. -# -cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS { - # This option is not active - # The parent CYGDBG_USE_TRACING is not active - # The parent CYGDBG_USE_TRACING is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use trace text -# All trace calls within eCos contain a text message -# which should give some information about the circumstances. -# These text messages will end up being embedded in the -# application image and hence there is a significant penalty -# in terms of image size. -# It is possible to suppress the use of these messages by -# disabling this option. -# This results in smaller code size, but there is less -# human-readable information available in the trace output, -# possibly only filenames and line numbers. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE { - # This option is not active - # The parent CYGDBG_USE_TRACING is not active - # The parent CYGDBG_USE_TRACING is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Trace output implementations -# -cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL { - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # component CYGDBG_USE_ASSERTS - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # component CYGDBG_USE_TRACING - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL -}; - -# Null output -# A null output module which is useful when -# debugging interactively; the output routines -# can be breakpointed rather than have them actually -# 'print' something. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Simple output -# An output module which produces simple output -# from tracing and assertion events. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Fancy output -# An output module which produces fancy output -# from tracing and assertion events. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Buffered tracing -# An output module which buffers output -# from tracing and assertion events. The stored -# messages are output when an assert fires, or -# CYG_TRACE_PRINT() (defined in ) -# is called. -# Of course, there will only be stored messages -# if tracing per se (CYGDBG_USE_TRACING) -# is enabled above. -# -cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Trace buffer size -# The size of the trace buffer. This counts the number -# of trace records stored. When the buffer fills it -# either wraps, stops recording, or generates output. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 - # Legal values: 5 to 65535 -}; - -# Wrap trace buffer when full -# When the trace buffer has filled with records it -# starts again at the beginning. Hence only the last -# CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will -# be recorded. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Halt trace buffer when full -# When the trace buffer has filled with records it -# stops recording. Hence only the first -# CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will -# be recorded. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Print trace buffer when full -# When the trace buffer has filled with records it -# prints the contents of the buffer. The buffer is then -# emptied and the system continues. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Print trace buffer on assert fail -# When an assertion fails the trace buffer will be -# printed to the default diagnostic device. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Use function names -# All trace and assert calls within eCos contain a -# reference to the builtin macro '__PRETTY_FUNCTION__', -# which evaluates to a string containing -# the name of the current function. -# This is useful when reading a trace log. -# It is possible to suppress the use of the function name -# by disabling this option. -# This results in smaller code size, but there is less -# human-readable information available in the trace output, -# possibly only filenames and line numbers. -# -cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Startup options -# Some packages require a startup routine to be called. -# This can be carried out by application code, by supplying -# a routine called cyg_package_start() which calls the -# appropriate package startup routine(s). -# Alternatively, this routine can be constructed automatically -# and configured to call the startup routines of your choice. -# -cdl_component CYGPKG_INFRA_STARTUP { - # There is no associated value. -}; - -# > -# Start uITRON subsystem -# Generate a call to initialize the -# uITRON compatibility subsystem -# within the system version of cyg_package_start(). -# This enables compatibility with uITRON. -# You must configure uITRON with the correct tasks before -# starting the uItron subsystem. -# If this is disabled, and you want to use uITRON, -# you must call cyg_uitron_start() from your own -# cyg_package_start() or cyg_userstart(). -# -cdl_option CYGSEM_START_UITRON_COMPATIBILITY { - # This option is not active - # ActiveIf constraint: CYGPKG_UITRON - # CYGPKG_UITRON (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGPKG_UITRON - # CYGPKG_UITRON (unknown) == 0 - # --> 0 -}; - -# < -# Smaller slower memcpy() -# Enabling this option causes the implementation of -# the standard memcpy() routine to reduce code -# size at the expense of execution speed. This -# option is automatically enabled with the use of -# the -Os option to the compiler. Also note that -# the compiler will try to use its own builtin -# version of memcpy() if possible, ignoring the -# implementation in this package, unless given -# the -fno-builtin compiler option. -# -cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Smaller slower memset() -# Enabling this option causes the implementation of -# the standard memset() routine to reduce code -# size at the expense of execution speed. This -# option is automatically enabled with the use of -# the -Os option to the compiler. Also note that -# the compiler will try to use its own builtin -# version of memset() if possible, ignoring the -# implementation in this package, unless given -# the -fno-builtin compiler option. -# -cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide empty C++ delete functions -# To deal with virtual destructors, where the correct delete() -# function must be called for the derived class in question, the -# underlying delete is called when needed, from destructors. This -# is regardless of whether the destructor is called by delete itself. -# So there is a reference to delete() from all destructors. The -# default builtin delete() attempts to call free() if there is -# one defined. So, if you have destructors, and you have free(), -# as in malloc() and free(), any destructor counts as a reference -# to free(). So the dynamic memory allocation code is linked -# in regardless of whether it gets explicitly called. This -# increases code and data size needlessly. -# To defeat this undesirable behaviour, we define empty versions -# of delete and delete. But doing this prevents proper use -# of dynamic memory in C++ programs via C++'s new and delete -# operators. -# Therefore, this option is provided -# for explicitly disabling the provision of these empty functions, -# so that new and delete can be used, if that is what is required. -# -cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Threshold for valid number of delete calls -# Some users don't know about the empty delete function and then -# wonder why their C++ classes are leaking memory. If -# INFRA_DEBUG is enabled we keep a counter for the number of -# times delete is called. If it goes above this threshold we throw -# an assertion failure. This should point heavy users of -# delete in the right direction without upsetting those who want -# an empty delete function. -# -cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD { - # This option is not active - # ActiveIf constraint: CYGPKG_INFRA_DEBUG - # CYGPKG_INFRA_DEBUG == 0 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 100 - # value_source default - # Default value: 100 -}; - -# Provide dummy abort() function -# This option controls the inclusion of a dummy abort() function. -# Parts of the C and C++ compiler runtime systems contain references -# to abort(), particulary in the C++ exception handling code. It is -# not possible to eliminate these references, so this dummy function -# in included to satisfy them. It is not expected that this function -# will ever be called, so its current behaviour is to simply loop. -# -cdl_option CYGFUN_INFRA_DUMMY_ABORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGINT_ISO_EXIT == 0 - # CYGINT_ISO_EXIT == 0 - # --> 1 - # Requires: !CYGINT_ISO_EXIT - # CYGINT_ISO_EXIT == 0 - # --> 1 -}; - -# Reset platform at end of test case execution -# If this option is set then test case programs will reset the platform -# when they terminate, as opposed to the default which is to just hang -# in a loop. -# -cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide dummy strlen() function -# This option controls the inclusion of a dummy strlen() function. -# Parts of the C and C++ compiler runtime systems contain references -# to strlen(), particulary in the C++ exception handling code. It is -# not possible to eliminate these references, so this dummy function -# in included to satisfy them. While it is not expected that this function -# will ever be called, it is functional but uses the simplest, smallest -# algorithm. There is a faster version of strlen() in the C library. -# -cdl_option CYGFUN_INFRA_DUMMY_STRLEN { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGINT_ISO_STRING_STRFUNCS == 0 - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 0 - # Requires: !CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 0 -}; - -# Make all compiler warnings show as errors -# Enabling this option will cause all compiler warnings to show -# as errors and bring the library build to a halt. This is used -# to ensure that the code base is warning free, and thus ensure -# that newly introduced warnings stand out and get fixed before -# they show up as weird run-time behavior. -# -cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror") - # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_GLOBAL_CFLAGS - # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS -}; - -# Make compiler and assembler communicate by pipe -# Enabling this option will cause the compiler to feed the -# assembly output the the assembler via a pipe instead of -# via a temporary file. This normally reduces the build -# time. -# -cdl_option CYGBLD_INFRA_CFLAGS_PIPE { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe") - # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # --> 1 -}; - -# Infra build options -# Package specific build options including control over -# compiler flags used only in building this package. -# -cdl_component CYGPKG_INFRA_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are used -# in addition to the set of global flags. -# -cdl_option CYGPKG_INFRA_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# Suppressed linker flags -# This option modifies the set of linker flags for -# building the eCos infra package tests. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wl,--gc-sections - # value_source default - # Default value: -Wl,--gc-sections -}; - -# Additional linker flags -# This option modifies the set of linker flags for -# building the eCos infra package tests. These flags are added to -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_LDFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wl,--fatal-warnings - # value_source default - # Default value: -Wl,--fatal-warnings -}; - -# Infra package tests -# -cdl_component CYGPKG_INFRA_TESTS { - # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2" - # Flavor: data - # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2 -}; - -# > -# Number of times a test runs -# This option controls the number of times tests will execute their -# basic function. Not all tests will honor this setting, but those -# that do will execute the test N times before terminating. A value -# less than 0 indicates to run forever. -# -cdl_option CYGNUM_TESTS_RUN_COUNT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# < -# < -# Redboot ROM monitor -# doc: ref/redboot.html -# This package supports the Redboot [stand-alone debug monitor] -# using eCos as the underlying board support mechanism. -# -cdl_package CYGPKG_REDBOOT { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 - # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 - # --> 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_ARM_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # component CYGPKG_REDBOOT_HAL_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # component CYGPKG_REDBOOT_HAL_TX37_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # option CYGSEM_IO_ETH_DRIVERS_WARN - # ActiveIf: CYGPKG_REDBOOT -}; - -# > -# Include support for ELF file format -# -cdl_component CYGSEM_REDBOOT_ELF { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Use the virtual address in the ELF headers -# The ELF headers contain both a virtual and a physical address -# for where code/data should be loaded. By default the physical -# address is used but sometimes it is necassary to use the -# virtual address because of bugy toolchains -# -cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Methods of loading images using redboot -# -cdl_interface CYGINT_REDBOOT_LOAD_METHOD { - # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled - # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 2 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_REDBOOT_LOAD_METHOD -}; - -# Build Redboot ROM ELF image -# This option enables the building of the Redboot ELF image. -# The image may require further relocation or symbol -# stripping before being converted to a binary image. -# This is handled by a rule in the target CDL. -# -cdl_component CYGBLD_BUILD_REDBOOT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYGPKG_INFRA - # CYGPKG_INFRA == current - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - # Requires: CYGINT_REDBOOT_LOAD_METHOD - # CYGINT_REDBOOT_LOAD_METHOD == 2 - # --> 1 - - # The following properties are affected by this value - # package CYGPKG_HAL_ARM_TX37KARO - # Requires: CYGBLD_BUILD_REDBOOT == 1 - # option CYGBLD_BUILD_REDBOOT_BIN - # ActiveIf: CYGBLD_BUILD_REDBOOT -}; - -# > -# Include GDB support in RedBoot -# RedBoot normally includes support for the GDB debugging -# protocols. This option allows this to be disabled which -# may yield a substantial savings in terms of code and memory -# usage by RedBoot. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS - # CYGINT_HAL_DEBUG_GDB_STUBS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 0 -}; - -# Threads debugging support -# Enabling this option will include special code in the -# GDB stubs to support debugging of threaded programs. In -# the case of eCos programs, this support allows GDB to -# have complete access to the eCos threads in the -# program. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS { - # ActiveIf constraint: CYG_HAL_STARTUP != "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1 - # --> 1 -}; - -# Customized version string -# Use this option to define a customized version "string" for -# RedBoot. Note: this value is only cosmetic, displayed by the -# "version" command, but is useful for providing site specific -# information about the RedBoot configuration. -# -cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 "Ka-Ro 2009-06-10" - # value_source inferred - # Default value: 0 0 -}; - -# Enable command line editing -# If this option is non-zero, RedBoot will remember the -# last N command lines. These lines may be reused. -# Enabling this history will also enable rudimentary -# editting of the lines themselves. -# -cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 16 - # value_source default - # Default value: 16 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES - # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0 - # option CYGBLD_REDBOOT_CMD_LINE_HISTORY - # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 -}; - -# Enable command line editing using ANSI arrows, etc -# If this option is enabled, RedBoot will accept standard ANSI key -# sequences for cursor movement (along with the emacs style keys). -# -cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES { - # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0 - # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Enable history command and expansion -# Enabling this option will allow RedBoot to provide a -# history command to list previous commands. Also enables -# history expansion via '!' character similar to bash -# shell. -# -cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 - # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16 - # --> 1 -}; - -# Number of unique RAM segments on platform -# Change this option to be the number of memory segments which are -# supported by the platform. If the value is greater than 1, then -# a platform specific function must provide information about the -# additional segments. -# -cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include support gzip/zlib decompression -# -cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB { - # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB - # CYGPKG_COMPRESS_ZLIB == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS -}; - -# > -# Size of zlib decompression buffer -# This is the size of the buffer filled with incoming data -# during load before calls are made to the decompressor -# function. For ethernet downloads this can be made bigger -# (at the cost of memory), but for serial downloads on slow -# processors it may be necessary to reduce the size to -# avoid serial overruns. zlib appears to bail out if less -# than five bytes are available initially so this is the -# minimum. -# -cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 64 - # value_source default - # Default value: 64 - # Legal values: 5 to 256 -}; - -# Support compression of Flash images -# This CDL indicates whether flash images can -# be decompressed from gzip/zlib format into RAM. -# -cdl_option CYGPRI_REDBOOT_ZLIB_FLASH { - # ActiveIf constraint: CYGPKG_REDBOOT_FLASH - # CYGPKG_REDBOOT_FLASH == 1 - # --> 1 - # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Include GZIP uncompress command -# Enable this option to include a 'gunzip' command -# to uncompress GZIP compressed data. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Turn on CYGPRI_REDBOOT_ZLIB_FLASH -# Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen -# -cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE -}; - -# < -# Include support for xyzModem downloads -# doc: ref/download-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGPKG_REDBOOT_CFLAGS_ADD - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are used -# in addition to the set of global flags. -# -cdl_option CYGPKG_REDBOOT_CFLAGS_ADD { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM - # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-inline - # value_source default - # Default value: -Wno-inline -}; - -# Allow the load-command write into Flash. -# Write images direct to Flash via the load command. -# We assume anything which is invalid RAM is flash, hence -# the requires statement -# -cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH { - # ActiveIf constraint: CYGPKG_REDBOOT_FLASH - # CYGPKG_REDBOOT_FLASH == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS - # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1 - # --> 1 -}; - -# Include MS Windows CE support -# doc: ref/wince.html -# This option enables MS Windows CE EShell support -# and Windows CE .BIN images support -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 -}; - -# Include support for MXC USB downloads -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include support for i.MX USB OTG downloads -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include POSIX checksum command -# doc: ref/cksum-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory fill command -# doc: ref/mfill-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory compare command -# doc: ref/mcmp-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory copy command -# doc: ref/mcopy-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory dump command -# doc: ref/dump-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include cache command -# doc: ref/cache-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include exec command -# doc: ref/exec-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_ARM_LINUX_EXEC - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC -}; - -# Include I/O Memory commands 'iopeek' and 'iopoke' -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Granularity of timer/ticks -# This option controls the granularity of the timers. -# Faster CPUs can afford higher granularity (lower values) -# which should give higher network performance since the stack -# is purely polled. -# -cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 250 - # value_source default - # Default value: 250 - # Legal values: 10 25 50 100 250 500 1000 -}; - -# Redboot Networking -# This option includes networking support in RedBoot. -# -cdl_component CYGPKG_REDBOOT_NETWORKING { - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS - # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING -}; - -# > -# Print net debug information -# This option is overriden by the configuration stored -# in flash. -# -cdl_option CYGDBG_REDBOOT_NET_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Support TFTP for download -# This option enables the use of the TFTP protocol for -# download -# -cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Support HTTP for download -# This option enables the use of the HTTP protocol for -# download -# -cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# Default IP address -# This IP address is the default used by RedBoot if -# a BOOTP/DHCP server does not respond. The numbers -# should be separated by *commas*, and not dots. If -# an IP address is configured into the Flash -# configuration, that will be used in preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# > -# Do not try to use BOOTP -# By default Redboot tries to use BOOTP to get an IP -# address. If there's no BOOTP server on your network -# use this option to avoid to wait until the -# timeout. This option is overriden by the -# configuration stored in flash. -# -cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP { - # This option is not active - # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Default bootp server -# This IP address is the default server -# address used by RedBoot if a BOOTP/DHCP -# server does not respond. The numbers should -# be separated by *commas*, and not dots. If -# an IP address is configured into the Flash -# configuration, that will be used in -# preference. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR { - # This option is not active - # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# < -# Use DHCP to get IP information -# Use DHCP protocol to obtain pertinent IP addresses, such -# as the client, server, gateway, etc. -# -cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY - # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP -}; - -# Use a gateway for non-local IP traffic -# Enabling this option will allow the RedBoot networking -# stack to use a [single] gateway to reach a non-local -# IP address. If disabled, RedBoot will only be able to -# reach nodes on the same subnet. -# -cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP - # CYGSEM_REDBOOT_NETWORKING_DHCP == 1 - # --> 1 -}; - -# > -# Default gateway IP address -# This IP address is the default used by RedBoot -# if a BOOTP/DHCP server does not respond. The -# numbers should be separated by *commas*, and -# not dots. If an IP address is configured into -# the Flash configuration, that will be used in -# preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# Default IP address mask -# This IP address mask is the default used by -# RedBoot if a BOOTP/DHCP server does not -# respond. The numbers should be separated by -# *commas*, and not dots. If an IP address is -# configured into the Flash configuration, that -# will be used in preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# < -# TCP port to listen for incoming connections -# RedBoot will 'listen' on this port for incoming TCP -# connections. This allows outside connections to be made -# to the platform, either for GDB or RedBoot commands. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 9000 - # value_source default - # Default value: 9000 -}; - -# Number of [network] packet buffers -# RedBoot may need to buffer network data to support -# various connections. This option allows control -# over the number of such buffered packets, and in -# turn, controls the amount of memory used by RedBoot -# (which is not available to user applications). -# Each packet buffer takes up about 1514 bytes. -# Note: there is little need to make this larger than -# the default. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 - # Legal values: 3 to 8 -}; - -# DNS support -# When this option is enabled, RedBoot will be built with -# support for DNS, allowing use of hostnames on the command -# line. -# -cdl_component CYGPKG_REDBOOT_NETWORKING_DNS { - # This option is not active - # ActiveIf constraint: CYGPKG_NS_DNS - # CYGPKG_NS_DNS (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: !CYGPKG_NS_DNS_BUILD - # CYGPKG_NS_DNS_BUILD (unknown) == 0 - # --> 1 -}; - -# > -# Default DNS IP -# This option sets the IP of the default DNS. The IP can be -# changed at runtime as well. -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0.0.0.0 - # value_source default - # Default value: 0.0.0.0 -}; - -# Timeout in DNS lookup -# This option sets the timeout used when looking up an -# address via the DNS. Default is 10 seconds. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # value_source default - # Default value: 10 -}; - -# Support the use of a domain name -# This option controls if Redboot supports domain -# names when performing DNS lookups -# -cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Default DNS domain -# This option sets the default DNS domain name. -# This value will be overwritten by the value in -# flash or a domain returned by DHCP -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Get DNS domain from Flash -# This option enables getting the domain name -# from the flash configuration. This can later be -# overwritten by a value learnt from DHCP -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Use DNS domain from DHCP -# This option enables the use of the domain name -# returned by DHCP. -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# BOOTP/DHCP DNS domain buffer size -# This options sets the size of the static -# buffer used by BOOTP/DHCP to store the DNS -# domain name. The domain name will not be -# set if the buffer is too small to hold it. -# -cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 -}; - -# < -# < -# Default network device driver -# This is the name of the default network device to use. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE { - # This option is not active - # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1 - # CYGHWR_NET_DRIVERS == 1 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"\"" - # value_source default - # Default value: "\"\"" -}; - -# Initialize only one net device -# This option tells RedBoot to stop initializing network -# devices when it finds the first device which is -# successfully initialized. The default behavior causes -# all network devices to be initialized. -# -cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE { - # This option is not active - # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1 - # CYGHWR_NET_DRIVERS == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Let RedBoot use any I/O channel for its console. -# If this option is enabled then RedBoot will attempt to use all -# defined serial I/O channels for its console device. Once input -# arrives at one of these channels then the console will use only -# that port. -# -cdl_option CYGPKG_REDBOOT_ANY_CONSOLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# Let RedBoot adjust the baud rate of the serial console. -# If this option is enabled then RedBoot will support commands -# to set and query the baud rate on the selected console. -# -cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE { - # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT - # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Run a platform specific startup function. -# If this option is enabled then RedBoot will execute a platform -# specific startup function before entering into its command line -# processing. This allows the platform to perform any special -# setups before RedBoot actually starts running. Note: the entire -# RedBoot environment will already be initialized at this point. -# -cdl_option CYGSEM_REDBOOT_PLF_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Run a platform specific ESA validation function. -# If this option is enabled then RedBoot will execute a platform -# specific function to validate an ethernet ESA. This would be -# useful if the address must conform to standards set by the -# hardware manufacturer, etc. -# -cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 - # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # option CYGDAT_DEVS_ETH_ARM_TX37KARO_OUI - # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE -}; - -# Maximum command line length -# This option allows control over how long the CLI command line -# should be. This space will be allocated statically -# rather than from RedBoot's stack. -# -cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # The inferred value should not be edited directly. - inferred_value 1024 - # value_source inferred - # Default value: 256 -}; - -# Command processing idle timeout (ms) -# This option controls the timeout period before the -# command processing is considered 'idle'. Making this -# number smaller will cause idle processing to take place -# more often, etc. The default value of 10ms is a reasonable -# tradeoff between responsiveness and overhead. -# -cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # value_source default - # Default value: 10 -}; - -# Validate RAM addresses during load -# This option controls whether or not RedBoot will make -# sure that memory being used by the "load" command is -# in fact in user RAM. Leaving the option enabled makes -# for a safer environment, but this check may not be valid -# on all platforms, thus the ability to disable it. -# ** Disable this only with great care ** -# -cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGBLD_REDBOOT_LOAD_INTO_FLASH - # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS -}; - -# Allow RedBoot to support FLASH programming -# If this option is enabled then RedBoot will provide commands -# to manage images in FLASH memory. These images can be loaded -# into memory for execution or executed in place. -# -cdl_component CYGPKG_REDBOOT_FLASH { - # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE - # CYGHWR_IO_FLASH_DEVICE == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: CYGPKG_REDBOOT_FLASH - # option CYGBLD_REDBOOT_LOAD_INTO_FLASH - # ActiveIf: CYGPKG_REDBOOT_FLASH -}; - -# > -# Byte order used to store info in flash. -# This option controls the byte ordering used to store -# the FIS directory info and flash config info. -# -cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value NATURAL - # value_source default - # Default value: NATURAL - # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST" -}; - -# RedBoot Flash Image System support -# doc: ref/flash-image-system.html -# This option enables the Flash Image System commands -# and support within RedBoot. If disabled, simple Flash -# access commands such as "fis write" will still exist. -# This option would be disabled for targets that need simple -# FLASH manipulation, but do not have the need or space for -# complete image management. -# -cdl_option CYGOPT_REDBOOT_FIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_FIS_CONTENTS - # ActiveIf: CYGOPT_REDBOOT_FIS - # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS -}; - -# Max number of chunks of free space to manage -# If this option is defined then "fis free" will -# rely on the FIS directory to determine what space is -# free within the FLASH. This option controls the -# maximum number of free segment which can be handled -# (typically this number is small). If this option is -# not enabled, the the archaic behaviour of actually -# scanning the FLASH for erased sectors (unreliable) -# will be used to determine what's free and what's -# not. -# -cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 32 - # value_source default - # Default value: 1 32 -}; - -# Flash Image System default directory contents -# -cdl_component CYGPKG_REDBOOT_FIS_CONTENTS { - # ActiveIf constraint: CYGOPT_REDBOOT_FIS - # CYGOPT_REDBOOT_FIS == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# > -# Flash block containing the Directory -# Which block of flash should hold the directory -# information. Positive numbers are absolute block -# numbers. Negative block numbers count backwards -# from the last block. eg 2 means block 2, -2 -# means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -1 - # value_source default - # Default value: -1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK -}; - -# Redundant Flash Image System Directory Support -# This option enables the use of a redundant FIS -# directory within RedBoot. If enabled a flash block -# will be reserved for a second copy of the fis -# directory. Doing this allow for power failure safe -# updates of the directory by the application. -# -cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1 - # --> 0 -}; - -# > -# Flash block containing the backup Directory -# Which block of flash should hold the redundant -# directory information. Positive numbers are -# absolute block numbers. Negative block numbers -# count backwards from the last block. eg 2 means -# block 2, -2 means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK { - # This option is not active - # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -3 - # value_source default - # Default value: -3 - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK - # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0 - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK -}; - -# < -# Pseudo-file to describe reserved area -# If an area of FLASH is reserved, it is informative to -# have a fis entry describing it. This option controls -# creation of such an entry by default in the fis init -# command. -# -cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE { - # This option is not active - # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# File to describe RedBoot boot image -# Normally a ROM-startup RedBoot image is first in the -# FLASH, and the system boots using that image. This -# option controls creation of an entry describing it in -# the fis init command. It might be disabled if a -# platform has an immutable boot image of its own, where -# we use a POST-startup RedBoot instead, which performs -# less board initialization. -# -cdl_option CYGOPT_REDBOOT_FIS_REDBOOT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_FIS_REDBOOT_POST - # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT - # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE - # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0 -}; - -# File to describe RedBoot POST-compatible image -# This option controls creation of an entry describing a -# POST-startup RedBoot image in the fis init command. -# Not all platforms support POST-startup. A platform -# might have both for testing purposes, where the -# eventual user would substitute their own POST code for -# the initial ROM-startup RedBoot, and then jump to the -# POST-compatible RedBoot immediately following. -# -cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT - # CYGOPT_REDBOOT_FIS_REDBOOT == 1 - # --> 0 -}; - -# > -# Offset of POST image from FLASH start -# This option specifies the offset for a POST image from -# the start of FLASH. If unset, then the fis entry -# describing the POST image will be placed where -# convenient. -# -cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET { - # This option is not active - # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET -}; - -# < -# File to describe RedBoot backup image -# This option controls creation of an entry describing a -# backup RedBoot image in the fis init command. -# Conventionally a RAM-startup RedBoot image is kept -# under this name for use in updating the ROM-based -# RedBoot that boots the board. -# -cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include ARM SIB ID in FIS -# If set, this option will cause the last 5 words of -# the FIS to include the special ID needed for the -# flash to be recognized as a reserved area for RedBoot -# by an ARM BootRom monitor. -# -cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Size of FIS directory entry -# The FIS directory is limited to one single flash -# sector. If your flash has tiny sectors, you may wish -# to reduce this value in order to get more slots in -# the FIS directory. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # value_source default - # Default value: 256 -}; - -# Number of FIS directory entries -# The FIS directory normally occupies a single flash -# sector. Adjusting this value can allow for more than -# one flash sector to be used, which is useful if your -# sectors are very small. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 8 - # value_source default - # Default value: 8 -}; - -# Maximum RedBoot image size -# This option controls the maximum length reserved -# for the RedBoot boot image in the FIS table. -# This should be a multiple of the flash's erase -# block size. -# -cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00020000 - # The inferred value should not be edited directly. - inferred_value 0x00040000 - # value_source inferred - # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0 - # CYGOPT_REDBOOT_FIS_REDBOOT == 1 - # --> 0x00020000 -}; - -# Offset from start of FLASH to RedBoot boot image -# This option controls where the RedBoot boot image is -# located relative to the start of FLASH. -# -cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # --> 0 - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # component CYGPKG_HAL_ARM_TX37_OPTIONS - # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 -}; - -# Size of reserved area at start of FLASH -# This option reserves an area at the start of -# FLASH where RedBoot will never interfere; it is -# expected that this area contains -# (non-RedBoot-based) POST code or some other boot -# monitor that executes before RedBoot. -# -cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGOPT_REDBOOT_FIS_RESERVED_BASE - # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET -}; - -# < -# Keep all RedBoot FLASH data blocks locked. -# When this option is enabled, RedBoot will keep configuration -# data and the FIS directory blocks implicitly locked. While -# this is somewhat safer, it does add overhead during updates. -# -cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL { - # This option is not active - # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 - # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use CRC checksums on FIS images. -# When this option is enabled, RedBoot will use CRC checksums -# when reading and writing flash images. -# -cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# ARM FLASH drivers support SIB flash block structure -# This interface is implemented by a flash driver -# to indicate that it supports the ARM SIB flash -# block structure -# -cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED { - # No options implement this inferface - # ActiveIf constraint: CYGPKG_HAL_ARM - # CYGPKG_HAL_ARM == current - # --> 1 - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_REDBOOT_ARM_FLASH_SIB - # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED -}; - -# Use ARM SIB flash block structure -# This option is used to interpret ARM Flash System -# information blocks. -# -cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB { - # This option is not active - # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED - # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Keep RedBoot configuration data in FLASH -# When this option is enabled, RedBoot will keep configuration -# data in a separate block of FLASH memory. This data will -# include such items as the node IP address or startup scripts. -# -cdl_component CYGSEM_REDBOOT_FLASH_CONFIG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGPKG_IO_FLASH != 0 - # CYGPKG_IO_FLASH == current - # --> 1 - - # The following properties are affected by this value - # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0" - # option CYGPKG_REDBOOT_NETWORKING_DNS_IP - # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG - # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN - # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG - # option CYGFUN_REDBOOT_BOOT_SCRIPT - # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG -}; - -# > -# Length of configuration data in FLASH -# This option is used to control the amount of memory and FLASH -# to be used for configuration options (persistent storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4096 - # value_source default - # Default value: 4096 -}; - -# Style of media used for persistent data storage -# Persistent data storage can either be held in 'norma' FLASH -# or some other device (represented by the 'EEPROM' choice). -# The different styles utilize different access methods. -# -cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value FLASH - # value_source default - # Default value: FLASH - # Legal values: "FLASH" "EEPROM" - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK - # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") -}; - -# Merged config data and FIS directory -# If this option is set, then the FIS directory and FLASH -# configuration database will be stored in the same physical -# FLASH block. -# -cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG { - # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # CYGOPT_REDBOOT_FIS == 1 - # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_REDUNDANT_FIS - # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG -}; - -# Which block of flash to use -# Which block of flash should hold the configuration -# information. Positive numbers are absolute block numbers. -# Negative block numbers count backwards from the last block. -# eg 2 means block 2, -2 means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -2 - # value_source default - # Default value: -2 -}; - -# Support simple macros/aliases in FLASH -# This option is used to allow support for simple text-based -# macros (aliases). These aliases are kept in the FLASH -# configuration data (persistent storage). -# -cdl_option CYGSEM_REDBOOT_FLASH_ALIASES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Length of strings in FLASH configuration data -# This option is used to control the amount of memory -# and FLASH to be used for string configuration -# options (persistent storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 128 - # value_source default - # Default value: 128 -}; - -# Length of configuration script(s) in FLASH -# This option is used to control the amount of memory and -# FLASH to be used for configuration options (persistent -# storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 512 - # The inferred value should not be edited directly. - inferred_value 2048 - # value_source inferred - # Default value: 512 -}; - -# Fallback to read-only FLASH configuration -# This option will cause the configuration information to -# revert to the readonly information stored in the FLASH. -# The option only takes effect after -# 1) the config_ok flag has been set to be true, -# indicating that at one time the copy in RAM was valid; -# and -# 2) the information in RAM has been verified to be invalid -# -cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH - # --> 1 -}; - -# < -# Allow RedBoot to support fileio -# If this option is enabled then RedBoot will provide commands -# to load files from fileio file systems such as JFFS2. -# -cdl_component CYGPKG_REDBOOT_FILEIO { - # This option is not active - # ActiveIf constraint: CYGPKG_IO_FILEIO - # CYGPKG_IO_FILEIO (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_GETC_BUFFER - # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256 -}; - -# > -# Include an ls command -# If this option is enabled a simple ls command will be -# included in redboot so the contents of a directory -# can be listed -# -cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS { - # This option is not active - # The parent CYGPKG_REDBOOT_FILEIO is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Allow RedBoot to support disks -# If this option is enabled then RedBoot will provide commands -# to load disk files. -# -cdl_component CYGPKG_REDBOOT_DISK { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# > -# Include Redboot commands for disk access -# -cdl_option CYGSEM_REDBOOT_DISK { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0 - # CYGINT_REDBOOT_DISK_DRIVERS == 0 - # --> 0 -}; - -# Hardware drivers for disk-type devices -# -cdl_interface CYGINT_REDBOOT_DISK_DRIVERS { - # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_DISK - # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0 -}; - -# Maximum number of supported disks -# This option controls the number of disks supported by -# RedBoot. -# -cdl_option CYGNUM_REDBOOT_MAX_DISKS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 -}; - -# Maximum number of partitions per disk -# This option controls the maximum number of supported -# partitions per disk. -# -cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 8 - # value_source default - # Default value: 8 -}; - -# Support IDE disks. -# When this option is enabled, RedBoot will support IDE disks. -# -cdl_component CYGSEM_REDBOOT_DISK_IDE { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0 - # CYGINT_HAL_PLF_IF_IDE == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Work with VMware virtual disks -# This option controls the disk driver behavior at -# ide-init -# -cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE { - # This option is not active - # The parent CYGSEM_REDBOOT_DISK_IDE is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Support Linux second extended filesystems. -# When this option is enabled, RedBoot will support EXT2 -# filesystems. -# -cdl_component CYGSEM_REDBOOT_DISK_EXT2FS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Support ISO9660 filesystems. -# When this option is enabled, RedBoot will support ISO9660 -# filesystems. -# -cdl_component CYGSEM_REDBOOT_DISK_ISO9660 { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Calculated value: 0 - # Flavor: bool - # Current value: 0 -}; - -# < -# Boot scripting -# doc: ref/persistent-state-flash.html -# This contains options related to RedBoot's boot script -# functionality. -# -cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT { - # There is no associated value. -}; - -# > -# Boot scripting enabled -# This option controls whether RedBoot boot script -# functionality is enabled. -# -cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT { - # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG - # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0 - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Use default RedBoot boot script -# If enabled, this option will tell RedBoot to use the -# value of this option as a default boot script. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGFUN_REDBOOT_BOOT_SCRIPT - # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG -}; - -# Resolution (in ms) for script timeout value. -# This option controls the resolution of the script -# timeout. The value is specified in milliseconds -# (ms), thus to have the script timeout be defined in -# terms of tenths of seconds, use 100. -# -cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1000 - # The inferred value should not be edited directly. - inferred_value 10 - # value_source inferred - # Default value: 1000 -}; - -# Script default timeout value -# This option is used to set the default timeout for startup -# scripts, when they are enabled. -# -cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 10 -}; - -# < -# Support RTC for time & date functions -# When this option is enabled, RedBoot will support commands to -# query and set the real time clock (time and date) -# -cdl_option CYGSEM_REDBOOT_RTC { - # This option is not active - # ActiveIf constraint: CYGPKG_IO_WALLCLOCK - # CYGPKG_IO_WALLCLOCK (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Behave like a ROM monitor -# Enabling this option will allow RedBoot to provide ROM -# monitor-style services to programs which it executes. -# -cdl_option CYGPRI_REDBOOT_ROM_MONITOR { - # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # CYG_HAL_STARTUP == ROMRAM - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - # Requires: CYGSEM_HAL_ROM_MONITOR - # CYGSEM_HAL_ROM_MONITOR == 1 - # --> 1 -}; - -# Allow RedBoot to handle GNUPro application 'syscalls'. -# If this option is enabled then RedBoot will install a -# syscall handler to support debugging of applications -# based on GNUPro newlib/bsp. -# -cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS - # option CYGPKG_HAL_GDB_FILEIO - # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS -}; - -# > -# Support additional syscalls for 'gprof' profiling -# Support additional syscalls to support a periodic callback -# function for histogram-style profiling, and an enquire/set -# of the tick rate. -# The application must use the GNUPro newlib facilities -# to set this up. -# -cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF { - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT - # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Does the HAL support 'gprof' profiling? -# -cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT { - # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF - # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT -}; - -# Do not raise SIGTRAP when program exits -# For some (single shot) newlib based programs, -# exiting and returning a termination status may be -# the normal expected behavior. -# -cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP { - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Use a common buffer for Zlib and FIS -# Use a common memory buffer for both the zlib workspace -# and FIS directory operations. This can save a substantial -# amount of RAM, especially when flash sectors are large. -# -cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS - # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1 - # CYGOPT_REDBOOT_FIS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Size of Zlib/FIS common buffer -# Size of common buffer to allocate. Must be at least the -# size of one flash sector. -# -cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE { - # This option is not active - # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x0000C000 - # value_source default - # Default value: 0x0000C000 - # Legal values: 0x4000 to 0x80000000 -}; - -# < -# Buffer size in getc when loading images -# When loading images a buffer is used between redboot and the -# underlying storage medium, eg a filesystem, or a socket etc. -# The size of this buffer can have a big impart on load speed. -# -cdl_option CYGNUM_REDBOOT_GETC_BUFFER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # value_source default - # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256 - # CYGPKG_REDBOOT_FILEIO == 0 - # --> 256 -}; - -# < -# Redboot for ARM options -# This option lists the target's requirements for a valid Redboot -# configuration. -# -cdl_component CYGPKG_REDBOOT_ARM_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Provide the exec command in RedBoot -# This option contains requirements for booting linux -# from RedBoot. The component is enabled/disabled from -# RedBoots CDL. -# -cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC - # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1 - # --> 1 - - # There is no associated value. -}; - -# > -# Enable -x switch for exec command. -# This option allows bi-endian platforms to launch kernels -# built for an endianess different than the RedBoot endianess -# -cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Physical base address of linux kernel -# This is the physical address of the base of the -# Linux kernel image. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x40108000 - # The inferred value should not be edited directly. - inferred_value 0x40108000 - # value_source inferred - # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT - # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000 - # --> 0x40108000 -}; - -# Default physical base address of linux kernel -# This is the physical address of the base of the -# Linux kernel image. This option gets set by the -# platform CDL. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00008000 - # The inferred value should not be edited directly. - inferred_value 0x40108000 - # value_source inferred - # Default value: 0x00008000 - - # The following properties are affected by this value - # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS - # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT - # component CYGPKG_REDBOOT_HAL_TX37_OPTIONS - # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000 -}; - -# Base address of linux kernel parameter tags -# This is the base address of the area of memory used to -# pass parameters to the Linux kernel. This should be chosen -# to avoid overlap with the kernel and any ramdisk image. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00000100 - # value_source default - # Default value: 0x00000100 -}; - -# < -# < -# Redboot HAL options -# This option lists the target's requirements for a valid Redboot -# configuration. -# -cdl_component CYGPKG_REDBOOT_HAL_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. -}; - -# > -# Build Redboot ROM binary image -# This option enables the conversion of the Redboot ELF -# image to a binary image suitable for ROM programming. -# -cdl_option CYGBLD_BUILD_REDBOOT_BIN { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT - # CYGBLD_BUILD_REDBOOT == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Redboot HAL variant options -# -cdl_component CYGPKG_REDBOOT_HAL_TX37_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. - # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000 - # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000 - # --> 1 -}; - -# < -# ISO C and POSIX infrastructure -# eCos supports implementations of ISO C libraries and POSIX -# implementations. This package provides infrastructure used by -# all such implementations. -# -cdl_package CYGPKG_ISOINFRA { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_STRING - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_COMPRESS_ZLIB - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_IO_FLASH - # Requires: CYGPKG_ISOINFRA - # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY - # Requires: CYGPKG_ISOINFRA - # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY - # DefaultValue: 0 != CYGPKG_ISOINFRA - # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS - # ActiveIf: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_I18N - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_STDLIB - # Requires: CYGPKG_ISOINFRA -}; - -# > -# Startup and termination -# -cdl_component CYGPKG_ISO_STARTUP { - # There is no associated value. -}; - -# > -# main() startup implementations -# Implementations of this interface arrange for a user-supplied -# main() to be called in an ISO compatible environment. -# -cdl_interface CYGINT_ISO_MAIN_STARTUP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP - # CYGINT_ISO_MAIN_STARTUP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MAIN_STARTUP - # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP -}; - -# environ implementations -# Implementations of this interface provide the environ -# variable required by POSIX. -# -cdl_interface CYGINT_ISO_ENVIRON { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_ENVIRON - # CYGINT_ISO_ENVIRON == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ENVIRON - # Requires: 1 >= CYGINT_ISO_ENVIRON -}; - -# < -# ctype.h functions -# -cdl_component CYGPKG_ISO_CTYPE_H { - # There is no associated value. -}; - -# > -# Number of implementations of ctype functions -# -cdl_interface CYGINT_ISO_CTYPE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_CTYPE - # Requires: 1 >= CYGINT_ISO_CTYPE - # package CYGPKG_HAL_ARM_TX37KARO - # Requires: CYGINT_ISO_CTYPE - # option CYGFUN_LIBC_STRING_BSD_FUNCS - # Requires: CYGINT_ISO_CTYPE - # package CYGPKG_LIBC_STDLIB - # Requires: CYGINT_ISO_CTYPE -}; - -# Ctype implementation header -# -cdl_option CYGBLD_ISO_CTYPE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # option CYGIMP_LIBC_I18N_CTYPE_INLINES - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" -}; - -# < -# Error handling -# -cdl_component CYGPKG_ISO_ERRNO { - # There is no associated value. -}; - -# > -# Number of implementations of error codes -# -cdl_interface CYGINT_ISO_ERRNO_CODES { - # Implemented by CYGPKG_ERROR, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_ERRNO_CODES - # CYGINT_ISO_ERRNO_CODES == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ERRNO_CODES - # Requires: 1 >= CYGINT_ISO_ERRNO_CODES -}; - -# Error codes implementation header -# -cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_ERROR - # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "" -}; - -# Number of implementations of errno variable -# -cdl_interface CYGINT_ISO_ERRNO { - # Implemented by CYGPKG_ERROR_ERRNO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_ERRNO - # CYGINT_ISO_ERRNO == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ERRNO - # Requires: 1 >= CYGINT_ISO_ERRNO -}; - -# errno variable implementation header -# -cdl_option CYGBLD_ISO_ERRNO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # component CYGPKG_ERROR_ERRNO - # Requires: CYGBLD_ISO_ERRNO_HEADER == "" -}; - -# < -# Locale-related functions -# -cdl_component CYGPKG_ISO_LOCALE { - # There is no associated value. -}; - -# > -# Number of implementations of locale functions -# -cdl_interface CYGINT_ISO_LOCALE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_LOCALE - # CYGINT_ISO_LOCALE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_LOCALE - # Requires: 1 >= CYGINT_ISO_LOCALE -}; - -# Locale implementation header -# -cdl_option CYGBLD_ISO_LOCALE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Standard I/O-related functionality -# -cdl_component CYGPKG_ISO_STDIO { - # There is no associated value. -}; - -# > -# Number of implementations of stdio file types -# -cdl_interface CYGINT_ISO_STDIO_FILETYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES - # CYGINT_ISO_STDIO_FILETYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILETYPES - # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES -}; - -# Stdio file types implementation header -# -cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Stdio standard streams implementations -# -cdl_interface CYGINT_ISO_STDIO_STREAMS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS - # CYGINT_ISO_STDIO_STREAMS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_STREAMS - # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS -}; - -# Stdio standard streams implementation header -# This header file must define stdin, stdout -# and stderr. -# -cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file operations -# -cdl_interface CYGINT_ISO_STDIO_FILEOPS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS - # CYGINT_ISO_STDIO_FILEOPS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEOPS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS -}; - -# Stdio file operations implementation header -# This header controls the file system operations on a file -# such as remove(), rename(), tmpfile(), tmpnam() and associated -# constants. -# -cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file access functionals -# -cdl_interface CYGINT_ISO_STDIO_FILEACCESS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS - # CYGINT_ISO_STDIO_FILEACCESS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEACCESS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FILEACCESS -}; - -# Stdio file access implementation header -# This header controls the file access operations -# such as fclose(), fflush(), fopen(), freopen(), setbuf(), -# setvbuf(), and associated constants. -# -cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio formatted I/O -# -cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO - # CYGINT_ISO_STDIO_FORMATTED_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FORMATTED_IO - # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FORMATTED_IO -}; - -# Stdio formatted I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio character I/O -# -cdl_interface CYGINT_ISO_STDIO_CHAR_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO - # CYGINT_ISO_STDIO_CHAR_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_CHAR_IO - # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO -}; - -# Stdio character I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio direct I/O -# -cdl_interface CYGINT_ISO_STDIO_DIRECT_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO - # CYGINT_ISO_STDIO_DIRECT_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_DIRECT_IO - # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO -}; - -# Stdio direct I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file positioning -# -cdl_interface CYGINT_ISO_STDIO_FILEPOS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS - # CYGINT_ISO_STDIO_FILEPOS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEPOS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FILEPOS -}; - -# Stdio file positioning implementation header -# -cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio error handling -# -cdl_interface CYGINT_ISO_STDIO_ERROR { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_ERROR - # CYGINT_ISO_STDIO_ERROR == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_ERROR - # Requires: 1 >= CYGINT_ISO_STDIO_ERROR -}; - -# Stdio error handling implementation header -# -cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX fd-related function implementations -# -cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS - # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS - # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS -}; - -# POSIX fd-related function implementation header -# -cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Standard general utility functions -# -cdl_component CYGPKG_ISO_STDLIB { - # There is no associated value. -}; - -# > -# String conversion function implementations -# -cdl_interface CYGINT_ISO_STDLIB_STRCONV { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV - # CYGINT_ISO_STDLIB_STRCONV == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_STRCONV - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV -}; - -# String conversion function implementation header -# -cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_ATOX - # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "" -}; - -# String to FP conversion function implementations -# -cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT { - # Implemented by CYGFUN_LIBC_strtod, active, disabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT - # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT -}; - -# String to FP conversion function implementation header -# -cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Random number generator implementations -# -cdl_interface CYGINT_ISO_RAND { - # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled - # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled - # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_RAND - # CYGINT_ISO_RAND == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_RAND - # Requires: 1 >= CYGINT_ISO_RAND -}; - -# Random number generator implementation header -# -cdl_option CYGBLD_ISO_RAND_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Malloc implementations -# -cdl_interface CYGINT_ISO_MALLOC { - # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_MALLOC - # CYGINT_ISO_MALLOC == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MALLOC - # Requires: 1 >= CYGINT_ISO_MALLOC - # option CYGFUN_LIBC_STRING_STRDUP - # ActiveIf: CYGINT_ISO_MALLOC -}; - -# Malloc implementation header -# -cdl_option CYGBLD_ISO_MALLOC_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Mallinfo() implementations -# -cdl_interface CYGINT_ISO_MALLINFO { - # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_MALLINFO - # CYGINT_ISO_MALLINFO == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MALLINFO - # Requires: 1 >= CYGINT_ISO_MALLINFO -}; - -# Mallinfo() implementation header -# -cdl_option CYGBLD_ISO_MALLINFO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Program exit functionality implementations -# -cdl_interface CYGINT_ISO_EXIT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_EXIT - # CYGINT_ISO_EXIT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_EXIT - # Requires: 1 >= CYGINT_ISO_EXIT - # option CYGFUN_INFRA_DUMMY_ABORT - # Requires: !CYGINT_ISO_EXIT - # option CYGFUN_INFRA_DUMMY_ABORT - # DefaultValue: CYGINT_ISO_EXIT == 0 -}; - -# Program exit functionality implementation header -# -cdl_option CYGBLD_ISO_EXIT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Program environment implementations -# -cdl_interface CYGINT_ISO_STDLIB_ENVIRON { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON - # CYGINT_ISO_STDLIB_ENVIRON == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_ENVIRON - # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON -}; - -# Program environment implementation header -# -cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# system() implementations -# -cdl_interface CYGINT_ISO_STDLIB_SYSTEM { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM - # CYGINT_ISO_STDLIB_SYSTEM == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_SYSTEM - # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM -}; - -# system() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# bsearch() implementations -# -cdl_interface CYGINT_ISO_BSEARCH { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_BSEARCH - # CYGINT_ISO_BSEARCH == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_BSEARCH - # Requires: 1 >= CYGINT_ISO_BSEARCH -}; - -# bsearch() implementation header -# -cdl_option CYGBLD_ISO_BSEARCH_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# qsort() implementations -# -cdl_interface CYGINT_ISO_QSORT { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT - # CYGINT_ISO_STDLIB_QSORT (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# qsort() implementation header -# -cdl_option CYGBLD_ISO_QSORT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# abs()/labs() implementations -# -cdl_interface CYGINT_ISO_ABS { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_ABS - # CYGINT_ISO_STDLIB_ABS (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# abs()/labs() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_ABS - # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "" -}; - -# div()/ldiv() implementations -# -cdl_interface CYGINT_ISO_DIV { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_DIV - # CYGINT_ISO_STDLIB_DIV (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# div()/ldiv() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_DIV - # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "" -}; - -# Header defining the implementation's MB_CUR_MAX -# -cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - - # The following properties are affected by this value - # interface CYGINT_LIBC_I18N_MB_REQUIRED - # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "" -}; - -# Multibyte character implementations -# -cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE - # CYGINT_ISO_STDLIB_MULTIBYTE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_MULTIBYTE - # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE -}; - -# Multibyte character implementation header -# -cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# String functions -# -cdl_component CYGPKG_ISO_STRING { - # There is no associated value. -}; - -# > -# Number of implementations of strerror() function -# -cdl_interface CYGINT_ISO_STRERROR { - # Implemented by CYGPKG_ERROR_STRERROR, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRERROR - # CYGINT_ISO_STRERROR == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRERROR - # Requires: 1 >= CYGINT_ISO_STRERROR -}; - -# strerror() implementation header -# -cdl_option CYGBLD_ISO_STRERROR_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGPKG_ERROR_STRERROR - # Requires: CYGBLD_ISO_STRERROR_HEADER == "" -}; - -# memcpy() implementation header -# -cdl_option CYGBLD_ISO_MEMCPY_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# memset() implementation header -# -cdl_option CYGBLD_ISO_MEMSET_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of strtok_r() function -# -cdl_interface CYGINT_ISO_STRTOK_R { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRTOK_R - # CYGINT_ISO_STRTOK_R == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRTOK_R - # Requires: 1 >= CYGINT_ISO_STRTOK_R -}; - -# strtok_r() implementation header -# -cdl_option CYGBLD_ISO_STRTOK_R_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "" -}; - -# Number of implementations of locale-specific string functions -# This covers locale-dependent string functions such as strcoll() -# and strxfrm(). -# -cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS - # CYGINT_ISO_STRING_LOCALE_FUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_LOCALE_FUNCS - # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS -}; - -# Locale-specific string functions' implementation header -# This covers locale-dependent string functions such as strcoll() -# and strxfrm(). -# -cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "" -}; - -# Number of implementations of BSD string functions -# -cdl_interface CYGINT_ISO_STRING_BSD_FUNCS { - # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS - # CYGINT_ISO_STRING_BSD_FUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_BSD_FUNCS - # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS -}; - -# BSD string functions' implementation header -# -cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGFUN_LIBC_STRING_BSD_FUNCS - # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "" -}; - -# Number of implementations of other mem*() functions -# -cdl_interface CYGINT_ISO_STRING_MEMFUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_MEMFUNCS - # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE - # Requires: CYGINT_ISO_STRING_MEMFUNCS -}; - -# Other mem*() functions' implementation header -# -cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "" -}; - -# Number of implementations of other ISO C str*() functions -# This covers the other str*() functions defined by ISO C. -# -cdl_interface CYGINT_ISO_STRING_STRFUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_STRFUNCS - # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_INFRA_DUMMY_STRLEN - # Requires: !CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_INFRA_DUMMY_STRLEN - # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0 - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_ISO_STRING_STRFUNCS - # component CYGPKG_IO_ETH_DRIVERS_NET - # Requires: CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STRING_STRFUNCS - # package CYGPKG_IO_FLASH - # Requires: CYGINT_ISO_STRING_STRFUNCS - # package CYGPKG_LIBC_STDLIB - # Requires: CYGINT_ISO_STRING_STRFUNCS -}; - -# Other ISO C str*() functions' implementation header -# This covers the other str*() functions defined by ISO C. -# -cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "" -}; - -# < -# Clock and time functionality -# -cdl_component CYGPKG_ISO_TIME { - # There is no associated value. -}; - -# > -# time_t implementation header -# -cdl_option CYGBLD_ISO_TIME_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# clock_t implementation header -# -cdl_option CYGBLD_ISO_CLOCK_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# struct timeval implementation header -# -cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# fnmatch implementation header -# -cdl_option CYGBLD_ISO_FNMATCH_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX timer types -# -cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES - # CYGINT_ISO_POSIX_TIMER_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMER_TYPES - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES -}; - -# POSIX timer types implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX clock types -# -cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES - # CYGINT_ISO_POSIX_CLOCK_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_CLOCK_TYPES - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES -}; - -# POSIX clock types implementation header -# -cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of ISO C types -# -cdl_interface CYGINT_ISO_C_TIME_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES - # CYGINT_ISO_C_TIME_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_C_TIME_TYPES - # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES -}; - -# ISO C time types implementation header -# -cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX timers -# -cdl_interface CYGINT_ISO_POSIX_TIMERS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS - # CYGINT_ISO_POSIX_TIMERS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMERS - # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS -}; - -# POSIX timer implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX clocks -# -cdl_interface CYGINT_ISO_POSIX_CLOCKS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS - # CYGINT_ISO_POSIX_CLOCKS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_CLOCKS - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS -}; - -# POSIX clocks implementation header -# -cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of ISO C clock functions -# -cdl_interface CYGINT_ISO_C_CLOCK_FUNCS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS - # CYGINT_ISO_C_CLOCK_FUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_C_CLOCK_FUNCS - # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS -}; - -# ISO C clock functions' implementation header -# -cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of tzset() function -# -cdl_interface CYGINT_ISO_TZSET { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_TZSET - # CYGINT_ISO_TZSET == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_TZSET - # Requires: 1 >= CYGINT_ISO_TZSET -}; - -# tzset() implementation header -# -cdl_option CYGBLD_ISO_TZSET_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Signal functionality -# -cdl_component CYGPKG_ISO_SIGNAL { - # There is no associated value. -}; - -# > -# Number of implementations of signal numbers -# -cdl_interface CYGINT_ISO_SIGNAL_NUMBERS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS - # CYGINT_ISO_SIGNAL_NUMBERS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGNAL_NUMBERS - # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS -}; - -# Signal numbering implementation header -# This header provides the mapping of signal -# names (e.g. SIGBUS) to numbers. -# -cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of signal implementations -# -cdl_interface CYGINT_ISO_SIGNAL_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL - # CYGINT_ISO_SIGNAL_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGNAL_IMPL - # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL -}; - -# Signals implementation header -# -cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX real time signals feature test macro -# This defines the POSIX feature test macro -# that indicates that the POSIX real time signals -# are present. -# -cdl_interface CYGINT_POSIX_REALTIME_SIGNALS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS - # CYGINT_POSIX_REALTIME_SIGNALS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_POSIX_REALTIME_SIGNALS - # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS -}; - -# < -# Non-local jumps functionality -# -cdl_component CYGPKG_ISO_SETJMP { - # There is no associated value. -}; - -# > -# setjmp() / longjmp() implementations -# -cdl_interface CYGINT_ISO_SETJMP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SETJMP - # CYGINT_ISO_SETJMP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SETJMP - # Requires: 1 >= CYGINT_ISO_SETJMP -}; - -# setjmp() / longjmp() implementation header -# -cdl_option CYGBLD_ISO_SETJMP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# sigsetjmp() / siglongjmp() implementations -# -cdl_interface CYGINT_ISO_SIGSETJMP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGSETJMP - # CYGINT_ISO_SIGSETJMP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGSETJMP - # Requires: 1 >= CYGINT_ISO_SIGSETJMP -}; - -# sigsetjmp() / siglongjmp() implementation header -# -cdl_option CYGBLD_ISO_SIGSETJMP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Assertions implementation header -# -cdl_option CYGBLD_ISO_ASSERT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX file control -# This covers the POSIX file control definitions, -# normally found in -# -cdl_component CYGPKG_ISO_POSIX_FCNTL { - # There is no associated value. -}; - -# > -# POSIX open flags implementation header -# -cdl_option CYGBLD_ISO_OFLAG_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX fcntl() implementations -# -cdl_interface CYGINT_ISO_FCNTL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_FCNTL - # CYGINT_ISO_FCNTL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_FCNTL - # Requires: 1 >= CYGINT_ISO_FCNTL -}; - -# POSIX fcntl() implementation header -# -cdl_option CYGBLD_ISO_FCNTL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX file open implementations -# -cdl_interface CYGINT_ISO_OPEN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_OPEN - # CYGINT_ISO_OPEN == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_OPEN - # Requires: 1 >= CYGINT_ISO_OPEN -}; - -# POSIX file open implementation header -# -cdl_option CYGBLD_ISO_OPEN_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# definitions implementation header -# -cdl_option CYGBLD_ISO_STAT_DEFS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX directory reading implementation -# -cdl_interface CYGINT_ISO_DIRENT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_DIRENT - # CYGINT_ISO_DIRENT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DIRENT - # Requires: 1 >= CYGINT_ISO_DIRENT -}; - -# definitions implementation header -# -cdl_option CYGBLD_ISO_DIRENT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX contents -# This covers the types required by POSIX to be in -# -# -cdl_component CYGPKG_ISO_POSIX_TYPES { - # There is no associated value. -}; - -# > -# POSIX thread types implementations -# -cdl_interface CYGINT_ISO_PTHREADTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # CYGINT_ISO_PTHREADTYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREADTYPES - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # interface CYGINT_ISO_PMUTEXTYPES - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES -}; - -# POSIX thread types implementation header -# -cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX mutex types implementations -# -cdl_interface CYGINT_ISO_PMUTEXTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # CYGINT_ISO_PTHREADTYPES == 0 - # --> 1 -}; - -# POSIX mutex types implementation header -# -cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# ssize_t implementation header -# -cdl_option CYGBLD_ISO_SSIZE_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Filesystem types implementation header -# -cdl_option CYGBLD_ISO_FSTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# gid_t, pid_t, uid_t implementation header -# -cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Non-POSIX contents -# This covers the extra types required by non-POSIX -# packages to be in . These would normally -# only be visible if _POSIX_SOURCE is not defined. -# -cdl_component CYGPKG_ISO_EXTRA_TYPES { - # There is no associated value. -}; - -# > -# BSD compatible types -# -cdl_interface CYGINT_ISO_BSDTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_BSDTYPES - # CYGINT_ISO_BSDTYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_BSDTYPES - # Requires: 1 >= CYGINT_ISO_BSDTYPES -}; - -# BSD types header -# -cdl_option CYGBLD_ISO_BSDTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Utsname structure -# -cdl_component CYGPKG_ISO_UTSNAME { - # There is no associated value. -}; - -# > -# Utsname header -# -cdl_option CYGBLD_ISO_UTSNAME_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX scheduler -# -cdl_component CYGPKG_ISO_SCHED { - # There is no associated value. -}; - -# > -# POSIX scheduler implementations -# -cdl_interface CYGINT_ISO_SCHED_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SCHED_IMPL - # CYGINT_ISO_SCHED_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SCHED_IMPL - # Requires: 1 >= CYGINT_ISO_SCHED_IMPL -}; - -# POSIX scheduler implementation header -# -cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX semaphores -# -cdl_component CYGPKG_ISO_SEMAPHORES { - # There is no associated value. -}; - -# > -# POSIX semaphore implementations -# -cdl_interface CYGINT_ISO_SEMAPHORES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SEMAPHORES - # CYGINT_ISO_SEMAPHORES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SEMAPHORES - # Requires: 1 >= CYGINT_ISO_SEMAPHORES -}; - -# POSIX semaphore implementation header -# -cdl_option CYGBLD_ISO_SEMAPHORES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX message queues -# -cdl_component CYGPKG_ISO_MQUEUE { - # There is no associated value. -}; - -# > -# Implementations -# -cdl_interface CYGINT_ISO_MQUEUE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MQUEUE - # Requires: 1 >= CYGINT_ISO_MQUEUE - # option CYGNUM_ISO_MQUEUE_OPEN_MAX - # ActiveIf: CYGINT_ISO_MQUEUE - # option CYGNUM_ISO_MQUEUE_PRIO_MAX - # ActiveIf: CYGINT_ISO_MQUEUE -}; - -# Implementation header -# -cdl_option CYGBLD_ISO_MQUEUE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Maximum number of open message queues -# -cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX { - # This option is not active - # ActiveIf constraint: CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 0 - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0 - # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0 - # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0 - # --> 0 0 -}; - -# Maximum number of message priorities -# -cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX { - # This option is not active - # ActiveIf constraint: CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 0 - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 65535 - # value_source default - # Default value: 1 65535 -}; - -# < -# POSIX threads -# -cdl_component CYGPKG_ISO_PTHREAD { - # There is no associated value. -}; - -# > -# POSIX pthread implementations -# -cdl_interface CYGINT_ISO_PTHREAD_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL - # CYGINT_ISO_PTHREAD_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREAD_IMPL - # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL -}; - -# POSIX pthread implementation header -# -cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX mutex/cond var implementations -# -cdl_interface CYGINT_ISO_PTHREAD_MUTEX { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX - # CYGINT_ISO_PTHREAD_MUTEX == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREAD_MUTEX - # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX -}; - -# POSIX mutex/cond var implementation header -# -cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Limits -# -cdl_component CYGPKG_ISO_LIMITS { - # There is no associated value. -}; - -# > -# POSIX pthread limits implementations -# -cdl_interface CYGINT_ISO_POSIX_LIMITS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS - # CYGINT_ISO_POSIX_LIMITS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_LIMITS - # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS -}; - -# POSIX pthread limits implementation header -# -cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# OPEN_MAX implementation header -# -cdl_option CYGBLD_ISO_OPEN_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# LINK_MAX implementation header -# -cdl_option CYGBLD_ISO_LINK_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# NAME_MAX implementation header -# -cdl_option CYGBLD_ISO_NAME_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# PATH_MAX implementation header -# -cdl_option CYGBLD_ISO_PATH_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX termios -# -cdl_component CYGPKG_ISO_TERMIOS { - # There is no associated value. -}; - -# > -# POSIX termios implementations -# -cdl_interface CYGINT_ISO_TERMIOS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_TERMIOS - # CYGINT_ISO_TERMIOS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_TERMIOS - # Requires: 1 >= CYGINT_ISO_TERMIOS -}; - -# POSIX termios implementation header -# -cdl_option CYGBLD_ISO_TERMIOS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Dynamic load API -# -cdl_component CYGPKG_ISO_DLFCN { - # There is no associated value. -}; - -# > -# Dynamic load implementations -# -cdl_interface CYGINT_ISO_DLFCN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_DLFCN - # CYGINT_ISO_DLFCN == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DLFCN - # Requires: 1 >= CYGINT_ISO_DLFCN -}; - -# Dynamic load implementation header -# -cdl_option CYGBLD_ISO_DLFCN_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# UNIX standard functions -# -cdl_component CYGPKG_ISO_UNISTD { - # There is no associated value. -}; - -# > -# POSIX timer operations implementations -# -cdl_interface CYGINT_ISO_POSIX_TIMER_OPS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS - # CYGINT_ISO_POSIX_TIMER_OPS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMER_OPS - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS -}; - -# POSIX timer operations implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX sleep() implementations -# -cdl_interface CYGINT_ISO_POSIX_SLEEP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP - # CYGINT_ISO_POSIX_SLEEP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_SLEEP - # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP -}; - -# POSIX sleep() implementation header -# -cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# select()/poll() functions -# -cdl_component CYGPKG_ISO_SELECT { - # There is no associated value. -}; - -# > -# select() implementations -# -cdl_interface CYGINT_ISO_SELECT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_SELECT - # CYGINT_ISO_SELECT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SELECT - # Requires: 1 >= CYGINT_ISO_SELECT -}; - -# select() implementation header -# -cdl_option CYGBLD_ISO_SELECT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# poll() implementations -# -cdl_interface CYGINT_ISO_POLL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POLL - # CYGINT_ISO_POLL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POLL - # Requires: 1 >= CYGINT_ISO_POLL -}; - -# poll() implementation header -# -cdl_option CYGBLD_ISO_POLL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# NetDB utility functions -# -cdl_component CYGPKG_ISO_NETDB { - # There is no associated value. -}; - -# > -# DNS implementations -# -cdl_interface CYGINT_ISO_DNS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_DNS - # CYGINT_ISO_DNS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DNS - # Requires: 1 >= CYGINT_ISO_DNS -}; - -# DNS implementation header -# -cdl_option CYGBLD_ISO_DNS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Protocol network database implementations -# -cdl_interface CYGINT_ISO_NETDB_PROTO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_NETDB_PROTO - # CYGINT_ISO_NETDB_PROTO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_NETDB_PROTO - # Requires: 1 >= CYGINT_ISO_NETDB_PROTO -}; - -# Protocol network database implementation header -# -cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Services network database implementations -# -cdl_interface CYGINT_ISO_NETDB_SERV { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_NETDB_SERV - # CYGINT_ISO_NETDB_SERV == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_NETDB_SERV - # Requires: 1 >= CYGINT_ISO_NETDB_SERV -}; - -# Services network database implementation header -# -cdl_option CYGBLD_ISO_NETDB_SERV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_ISOINFRA_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the ISO C and POSIX infrastructure package. -# These flags are used in addition to the set of global flags. -# -cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the ISO C and POSIX infrastructure package. -# These flags are removed from the set of global flags -# if present. -# -cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# < -# Compute CRCs -# doc: ref/services-crc.html -# This package provides support for CRC calculation. Currently -# this is the POSIX 1003 defined CRC algorithm, a 32 CRC by -# Gary S. Brown, and a 16 bit CRC. -# -cdl_package CYGPKG_CRC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # package CYGPKG_COMPRESS_ZLIB - # Requires: CYGPKG_CRC -}; - -# > -# POSIX CRC tests -# -cdl_option CYGPKG_CRC_TESTS { - # Calculated value: "tests/crc_test" - # Flavor: data - # Current_value: tests/crc_test -}; - -# < -# Zlib compress and decompress package -# This package provides support for compression and -# decompression. -# -cdl_package CYGPKG_COMPRESS_ZLIB { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGPKG_CRC - # CYGPKG_CRC == current - # --> 1 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB - # ActiveIf: CYGPKG_COMPRESS_ZLIB -}; - -# > -# Override memory allocation routines. -# -cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC { - # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC - # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0 -}; - -# Should deflate() produce 'gzip' compatible output? -# If this option is set then the output of calling deflate() -# will be wrapped up as a 'gzip' compatible file. -# -cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Does this library need malloc? -# This pseudo-option will force the memalloc library to be -# required iff the application does not provide it's own -# infrastructure. -# -cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC { - # This option is not active - # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0 - # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGPKG_MEMALLOC - # CYGPKG_MEMALLOC == current - # --> 1 -}; - -# Include stdio-like utility functions -# This option enables the stdio-like zlib utility functions -# (gzread/gzwrite and friends) provided in gzio.c. -# -cdl_option CYGFUN_COMPRESS_ZLIB_GZIO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0 - # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0 - # --> 0 - # Requires: CYGINT_ISO_STDIO_FILEPOS - # CYGINT_ISO_STDIO_FILEPOS == 0 - # --> 0 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - # Requires: CYGINT_ISO_STDIO_FORMATTED_IO - # CYGINT_ISO_STDIO_FORMATTED_IO == 0 - # --> 0 - # Requires: CYGINT_ISO_STDIO_FILEACCESS - # CYGINT_ISO_STDIO_FILEACCESS == 0 - # --> 0 -}; - -# Zlib compress and decompress package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D__ECOS__ -DNO_ERRNO_H" - # value_source default - # Default value: "-D__ECOS__ -DNO_ERRNO_H" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wstrict-prototypes - # value_source default - # Default value: -Wstrict-prototypes -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# zlib tests -# -cdl_option CYGPKG_COMPRESS_ZLIB_TESTS { - # Calculated value: "tests/zlib1.c tests/zlib2.c" - # Flavor: data - # Current_value: tests/zlib1.c tests/zlib2.c -}; - -# < -# FLASH device drivers -# doc: ref/flash.html -# This option enables drivers for basic I/O services on -# flash devices. -# -cdl_package CYGPKG_IO_FLASH { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_FLASH_CONFIG - # DefaultValue: CYGPKG_IO_FLASH != 0 - # package CYGPKG_DEVS_FLASH_ONMXC - # ActiveIf: CYGPKG_IO_FLASH -}; - -# > -# Hardware FLASH device drivers -# This option enables the hardware device drivers -# for the current platform. -# -cdl_interface CYGHWR_IO_FLASH_DEVICE { - # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_FLASH - # ActiveIf: CYGHWR_IO_FLASH_DEVICE -}; - -# Hardware FLASH device drivers are not in RAM -# Use of this interface is deprecated. -# Drivers should make sure that the functions are -# linked to RAM by putting them in .2ram sections. -# -cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM - # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM - # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM -}; - -# Hardware can support block locking -# This option will be enabled by devices which can support -# locking (write-protection) of individual blocks. -# -cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL - # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 -}; - -# Hardware cannot support direct access to FLASH memory -# This option will be asserted by devices which cannot support -# direct access to the FLASH memory contents (e.g. EEPROM or NAND -# devices). In these cases, the driver must provide an appropriate -# hardware access function. -# -cdl_option CYGSEM_IO_FLASH_READ_INDIRECT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM - # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE - # component CYGHWR_DEVS_FLASH_MMC - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MMC_ESDHC - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MMC_SD - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MXC_NAND - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 -}; - -# Display status messages during flash operations -# Selecting this option will cause the drivers to print status -# messages as various flash operations are undertaken. -# -cdl_option CYGSEM_IO_FLASH_CHATTER { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Verify data programmed to flash -# Selecting this option will cause verification of data -# programmed to flash. -# -cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_IO_FLASH_READ_INDIRECT - # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM -}; - -# Platform has flash soft DIP switch write-protect -# Selecting this option will cause the state of a hardware jumper or -# dipswitch to be read by software to determine whether the flash is -# write-protected or not. -# -cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Instantiate in I/O block device API -# Provides a block device accessible using the standard I/O -# API ( cyg_io_read() etc. ) -# -cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE { - # This option is not active - # ActiveIf constraint: CYGPKG_IO - # CYGPKG_IO (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Name of flash device 1 block device -# -cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 { - # This option is not active - # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active - # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"/dev/flash1\"" - # value_source default - # Default value: "\"/dev/flash1\"" -}; - -# > -# -cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 { - # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled - # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1 - # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0 - # --> 0 - - # The following properties are affected by this value - # interface CYGINT_IO_FLASH_BLOCK_CFG_1 - # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1 -}; - -# Static configuration -# This configures the flash device 1 block device -# with static base and length -# -cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 { - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Start offset from flash base -# This gives the offset from the base of flash which this -# block device corresponds to. -# -cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# Length -# This gives the length of the region of flash given over -# to this block device. -# -cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# < -# Configuration from FIS -# This configures the flash device 1 block device -# from Redboot FIS -# -cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 { - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Name of FIS entry -# -cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"jffs2\"" - # value_source default - # Default value: "\"jffs2\"" -}; - -# < -# < -# < -# Flash device driver build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_IO_FLASH_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the flash device drivers. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the flash device drivers. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Flash device driver tests -# This option specifies the set of tests for the flash device drivers. -# -cdl_component CYGPKG_IO_FLASH_TESTS { - # Calculated value: "tests/flash1" - # Flavor: data - # Current_value: tests/flash1 -}; - -# > -# Start offset from flash base -# This gives the offset from the base of flash where tests -# can be run. It is important to set this correctly, as an -# incorrect value could allow the tests to write over critical -# portions of the FLASH device and possibly render the target -# board totally non-functional. -# -cdl_option CYGNUM_IO_FLASH_TEST_OFFSET { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# Length -# This gives the length of the region of flash used for testing. -# -cdl_option CYGNUM_IO_FLASH_TEST_LENGTH { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# < -# < -# Support FLASH memory on Freescale MXC platforms -# -cdl_package CYGPKG_DEVS_FLASH_ONMXC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_FLASH - # CYGPKG_IO_FLASH == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# MXC platform MMC card support -# When this option is enabled, it indicates MMC card is -# supported on the MXC platforms -# -cdl_component CYGHWR_DEVS_FLASH_MMC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) -}; - -# > -# MXC platform MMC card for newer SDHC controllers -# -cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC { - # This option is not active - # The parent CYGHWR_DEVS_FLASH_MMC is disabled - # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51 - # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0 - # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0 - # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0 - # CYGPKG_HAL_ARM_MX51 (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 -}; - -# MXC platform MMC card for older MMC/SD controllers -# -cdl_option CYGHWR_DEVS_FLASH_MMC_SD { - # This option is not active - # The parent CYGHWR_DEVS_FLASH_MMC is disabled - # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS - # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0 - # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 -}; - -# < -# MXC platform NOR flash memory support -# When this option is enabled, it indicates NOR flash is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_NOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR - # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1 - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) -}; - -# MXC platform NAND flash memory support -# When this option is enabled, it indicates NAND flash is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_NAND { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH - # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND - # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND -}; - -# i.MX platform SPI NOR flash memory support -# When this option is enabled, it indicates SPI NOR flash is -# supported on the i.MX platforms -# -cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # --> 0 -}; - -# MXC platform ATA support -# When this option is enabled, it indicates ATA is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_ATA { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Use a flash based Bad Block Table -# -cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH { - # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # --> 1 - - # There is no associated value. -}; - -# > -# When this option is enabled, the driver will search for a flash -# based bad block table -# -cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# header file defining the NAND BBT descriptor -# defines the name of the header file that describes the BBT layout -# -cdl_component CYGHWR_FLASH_NAND_BBT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 -}; - -# Number of blocks to reserve for BBT -# Number of blocks to reserve for BBT -# -cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 -}; - -# < -# MXC platform multi flash memory support -# When this option is enabled, it indicates multi flashes are -# supported on the MXC platforms (like NAND and NOR) -# -cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI { - # This option is not active - # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # CYGHWR_DEVS_FLASH_MMC == 0 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # CYGHWR_DEVS_FLASH_MMC == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# MXC platform NAND flash reset workaround support -# When this option is enabled, it indicates 0xFFFF is used for -# the NAND reset command instead of 0xFF. -# -cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND { - # No options implement this inferface - # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # --> 1 - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# < -# < -# Dynamic memory allocation -# doc: ref/memalloc.html -# This package provides memory allocator infrastructure required for -# dynamic memory allocators, including the ISO standard malloc -# interface. It also contains some sample implementations. -# -cdl_package CYGPKG_MEMALLOC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC - # Requires: CYGPKG_MEMALLOC -}; - -# > -# Memory allocator implementations -# This component contains configuration options related to the -# various memory allocators available. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATORS { - # There is no associated value. -}; - -# > -# Fixed block allocator -# This component contains configuration options related to the -# fixed block memory allocator. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Simple variable block allocator -# This component contains configuration options related to the -# simple variable block memory allocator. This allocator is not -# very fast, and in particular does not scale well with large -# numbers of allocations. It is however very compact in terms of -# code size and does not have very much overhead per allocation. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are added that allow a thread to wait until memory -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Coalesce memory -# The variable-block memory allocator can perform coalescing -# of memory whenever the application code releases memory back -# to the pool. This coalescing reduces the possibility of -# memory fragmentation problems, but involves extra code and -# processor cycles. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE - # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE -}; - -# < -# Doug Lea's malloc -# This component contains configuration options related to the -# port of Doug Lea's memory allocator, normally known as -# dlmalloc. dlmalloc has a reputation for being both fast -# and space-conserving, as well as resisting fragmentation well. -# It is a common choice for a general purpose allocator and -# has been used in both newlib and Linux glibc. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC { - # There is no associated value. -}; - -# > -# Debug build -# Doug Lea's malloc implementation has substantial amounts -# of internal checking in order to verify the operation -# and consistency of the allocator. However this imposes -# substantial overhead on each operation. Therefore this -# checking may be individually disabled. -# -cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 != CYGDBG_USE_ASSERTS - # CYGDBG_USE_ASSERTS == 0 - # --> 0 - # Requires: CYGDBG_USE_ASSERTS - # CYGDBG_USE_ASSERTS == 0 - # --> 0 -}; - -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 -}; - -# Support more than one instance -# Having this option disabled allows important -# implementation structures to be declared as a single -# static instance, allowing faster access. However this -# would fail if there is more than one instance of -# the dlmalloc allocator class. Therefore this option can -# be enabled if multiple instances are required. Note: as -# a special case, if this allocator is used as the -# implementation of malloc, and it can be determined there -# is more than one malloc pool, then this option will be -# silently enabled. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use system memmove() and memset() -# This may be used to control whether memset() and memmove() -# are used within the implementation. The alternative is -# to use some macro equivalents, which some people report -# are faster in some circumstances. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 0 != CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# Minimum alignment of allocated blocks -# This option controls the minimum alignment that the -# allocated memory blocks are aligned on, specified as -# 2^N. Note that using large mininum alignments can lead -# to excessive memory wastage. -# -cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 3 - # value_source default - # Default value: 3 - # Legal values: 3 to 10 -}; - -# < -# Variable block allocator with separate metadata -# This component contains configuration options related to the -# variable block memory allocator with separate metadata. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# < -# Kernel C API support for memory allocation -# This option must be enabled to provide the extensions required -# to support integration into the kernel C API. -# -cdl_option CYGFUN_MEMALLOC_KAPI { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGFUN_KERNEL_API_C - # CYGFUN_KERNEL_API_C (unknown) == 0 - # --> 0 -}; - -# malloc(0) returns NULL -# This option controls the behavior of malloc(0) ( or calloc with -# either argument 0 ). It is permitted by the standard to return -# either a NULL pointer or a unique pointer. Enabling this option -# forces a NULL pointer to be returned. -# -cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Breakpoint site when running out of memory -# Whenever the system runs out of memory, it invokes this function -# before either going to sleep waiting for memory to become -# available or returning failure. -# -cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# malloc() and supporting allocators -# This component enables support for dynamic memory -# allocation as supplied by the functions malloc(), -# free(), calloc() and realloc(). As these -# functions are often used, but can have quite an -# overhead, disabling them here can ensure they -# cannot even be used accidentally when static -# allocation is preferred. Within this component are -# various allocators that can be selected for use -# as the underlying implementation of the dynamic -# allocation functions. -# -cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS { - # ActiveIf constraint: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Use external heap definition -# This option allows other components in the -# system to override the default system -# provision of heap memory pools. This should -# be set to a header which provides the equivalent -# definitions to . -# -cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Use external implementation of joining multiple heaps -# The default implementation of joining multiple heaps -# is fine for the case where there are multiple disjoint -# memory regions of the same type. However, in a system -# there might be e.g. a small amount of internal SRAM and -# a large amount of external DRAM. The SRAM is faster and -# the DRAM is slower. An application can implement some -# heuristic to choose which pool to allocate from. This -# heuristic can be highly application specific. -# -cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# malloc() allocator implementations -# -cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS { - # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled - # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 - # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS - # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 -}; - -# malloc() implementation instantiation data -# Memory allocator implementations that are capable of being -# used underneath malloc() must be instantiated. The code -# to do this is set in this option. It is only intended to -# be set by the implementation, not the user. -# -cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value - # value_source default - # Default value: - - # The following properties are affected by this value - # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" -}; - -# Simple variable block implementation -# This causes malloc() to use the simple -# variable block allocator. -# -cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == - # --> 0 - # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE - # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1 - # --> 1 -}; - -# Doug Lea's malloc implementation -# This causes malloc() to use a version of Doug Lea's -# malloc (dlmalloc) as the underlying implementation. -# -cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == - # --> 1 -}; - -# < -# Size of the fallback dynamic memory pool in bytes -# If *no* heaps are configured in your memory layout, -# dynamic memory allocation by -# malloc() and calloc() must be from a fixed-size, -# contiguous memory pool (note here that it is the -# pool that is of a fixed size, but malloc() is still -# able to allocate variable sized chunks of memory -# from it). This option is the size -# of that pool, in bytes. Note that not all of -# this is available for programs to -# use - some is needed for internal information -# about memory regions, and some may be lost to -# ensure that memory allocation only returns -# memory aligned on word (or double word) -# boundaries - a very common architecture -# constraint. -# -cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 16384 - # value_source default - # Default value: 16384 - # Legal values: 32 to 0x7fffffff -}; - -# Common memory allocator package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_MEMALLOC_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# Tests -# This option specifies the set of tests for this package. -# -cdl_option CYGPKG_MEMALLOC_TESTS { - # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2" - # Flavor: data - # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2 -}; - -# < -# < -# Common error code support -# This package contains the common list of error and -# status codes. It is held centrally to allow -# packages to interchange error codes and status -# codes in a common way, rather than each package -# having its own conventions for error/status -# reporting. The error codes are modelled on the -# POSIX style naming e.g. EINVAL etc. This package -# also provides the standard strerror() function to -# convert error codes to textual representation, as -# well as an implementation of the errno idiom. -# -cdl_package CYGPKG_ERROR { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "" - # CYGBLD_ISO_ERRNO_CODES_HEADER == - # --> 1 -}; - -# > -# errno variable -# This package controls the behaviour of the -# errno variable (or more strictly, expression) -# from . -# -cdl_component CYGPKG_ERROR_ERRNO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_ERRNO_HEADER == "" - # CYGBLD_ISO_ERRNO_HEADER == - # --> 1 -}; - -# > -# Per-thread errno -# This option controls whether the standard error -# code reporting variable errno is a per-thread -# variable, rather than global. -# -cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Tracing level -# Trace verbosity level for debugging the errno -# retrieval mechanism in errno.cxx. Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# < -# strerror function -# This package controls the presence and behaviour of the -# strerror() function from -# -cdl_option CYGPKG_ERROR_STRERROR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STRERROR_HEADER == "" - # CYGBLD_ISO_STRERROR_HEADER == - # --> 1 -}; - -# Error package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_ERROR_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the error package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_ERROR_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the error package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_ERROR_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# < -# < - diff --git a/config/TX53-1xx1.ecc b/config/TX53-1xx1.ecc deleted file mode 100644 index b7918e9d..00000000 --- a/config/TX53-1xx1.ecc +++ /dev/null @@ -1,10364 +0,0 @@ -# eCos saved configuration - -# ---- commands -------------------------------------------------------- -# This section contains information about the savefile format. -# It should not be edited. Any modifications made to this section -# may make it impossible for the configuration tools to read -# the savefile. - -cdl_savefile_version 1; -cdl_savefile_command cdl_savefile_version {}; -cdl_savefile_command cdl_savefile_command {}; -cdl_savefile_command cdl_configuration { description hardware template package }; -cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value }; - -# ---- toplevel -------------------------------------------------------- -# This section defines the toplevel configuration object. The only -# values that can be changed are the name of the configuration and -# the description field. It is not possible to modify the target, -# the template or the set of packages simply by editing the lines -# below because these changes have wide-ranging effects. Instead -# the appropriate tools should be used to make such modifications. - -cdl_configuration eCos { - description "" ; - - # These fields should not be modified. - hardware tx53karo ; - template redboot ; - package -hardware CYGPKG_HAL_ARM current ; - package -hardware CYGPKG_HAL_ARM_MX53 current ; - package -hardware CYGPKG_HAL_ARM_TX53KARO current ; - package -template CYGPKG_HAL current ; - package -template CYGPKG_INFRA current ; - package -template CYGPKG_REDBOOT current ; - package -template CYGPKG_ISOINFRA current ; - package -template CYGPKG_LIBC_STRING current ; - package -template CYGPKG_CRC current ; - package -hardware CYGPKG_IO_ETH_DRIVERS current ; - package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ; - package -hardware CYGPKG_DEVS_ETH_FEC current ; - package -hardware CYGPKG_COMPRESS_ZLIB current ; - package -hardware CYGPKG_IO_FLASH current ; - package -hardware CYGPKG_DEVS_FLASH_ONMXC current ; - package -template CYGPKG_MEMALLOC current ; - package -template CYGPKG_DEVS_ETH_PHY current ; - package -template CYGPKG_LIBC_I18N current ; - package -template CYGPKG_LIBC_STDLIB current ; - package -template CYGPKG_ERROR current ; - package -hardware CYGPKG_DEVS_MXC_I2C current ; - package -hardware CYGPKG_DEVS_IMX_IPU current ; -}; - -# ---- conflicts ------------------------------------------------------- -# There are no conflicts. - -# ---- contents -------------------------------------------------------- -# > -# > -# Global build options -# Global build options including control over -# compiler flags, linker flags and choice of toolchain. -# -cdl_component CYGBLD_GLOBAL_OPTIONS { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Global command prefix -# This option specifies the command prefix used when -# invoking the build tools. -# -cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX { - # Flavor: data - user_value arm-cortexa8-linux-gnu - # value_source user - # Default value: arm-926ejs-linux-gnu -}; - -# Global compiler flags -# This option controls the global compiler flags which are used to -# compile all packages by default. Individual packages may define -# options which override these global flags. -# -cdl_option CYGBLD_GLOBAL_CFLAGS { - # Flavor: data - user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # The inferred value should not be edited directly. - inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # value_source user - # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS - # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror") - # option CYGBLD_INFRA_CFLAGS_PIPE - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe") -}; - -# Global linker flags -# This option controls the global linker flags. Individual -# packages may define options which override these global flags. -# -cdl_option CYGBLD_GLOBAL_LDFLAGS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" - # value_source default - # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" -}; - -# Build common GDB stub ROM image -# Unless a target board has specific requirements to the -# stub implementation, it can use a simple common stub. -# This option, which gets enabled by platform HALs as -# appropriate, controls the building of the common stub. -# -cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 -}; - -# < -# ISO C library string functions -# doc: ref/libc.html -# This package provides string functions specified by the -# ISO C standard - ISO/IEC 9899:1990. -# -cdl_package CYGPKG_LIBC_STRING { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "" - # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "" - # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "" - # CYGBLD_ISO_STRING_STRFUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "" - # CYGBLD_ISO_STRTOK_R_HEADER == - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# > -# Inline versions of functions -# This option chooses whether some of the -# particularly simple string functions from -# are available as inline -# functions. This may improve performance, and as -# the functions are small, may even improve code -# size. -# -cdl_option CYGIMP_LIBC_STRING_INLINES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Optimize string functions for code size -# This option tries to reduce string function -# code size at the expense of execution speed. The -# same effect can be produced if the code is -# compiled with the -Os option to the compiler. -# -cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide BSD compatibility functions -# Enabling this option causes various compatibility functions -# commonly found in the BSD UNIX operating system to be included. -# These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp, -# strncasecmp, index, rindex and swab. -# -cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "" - # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == - # --> 1 - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 -}; - -# strtok -# These options control the behaviour of the -# strtok() and strtok_r() string tokenization -# functions. -# -cdl_component CYGPKG_LIBC_STRING_STRTOK { - # There is no associated value. -}; - -# > -# Per-thread strtok() -# This option controls whether the string function -# strtok() has its state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Note there is also a POSIX-standard strtok_r() -# function to achieve a similar effect with user -# support. Enabling this option will use one slot -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Tracing level -# Trace verbosity level for debugging the -# functions strtok() and strtok_r(). Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# < -# strdup -# This option indicates whether strdup() is to be supported. -# -cdl_option CYGFUN_LIBC_STRING_STRDUP { - # ActiveIf constraint: CYGINT_ISO_MALLOC - # CYGINT_ISO_MALLOC == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# C library string functions build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_STRING_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library string function tests -# This option specifies the set of tests for the C library -# string functions. -# -cdl_option CYGPKG_LIBC_STRING_TESTS { - # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2" - # Flavor: data - # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2 -}; - -# < -# < -# Common ethernet support -# doc: ref/io-eth-drv-generic.html -# Platform independent ethernet drivers -# -cdl_package CYGPKG_IO_ETH_DRIVERS { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_NETWORKING - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_ARM_TX53 - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_FEC - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_PHY - # ActiveIf: CYGPKG_IO_ETH_DRIVERS -}; - -# > -# Network drivers -# -cdl_interface CYGHWR_NET_DRIVERS { - # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE - # ActiveIf: CYGHWR_NET_DRIVERS > 1 - # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE - # ActiveIf: CYGHWR_NET_DRIVERS > 1 -}; - -# Driver supports multicast addressing -# This interface defines whether or not a driver can handle -# requests for multicast addressing. -# -cdl_interface CYGINT_IO_ETH_MULTICAST { - # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# Support printing driver debug information -# Selecting this option will include code to allow the driver to -# print lots of information on diagnostic output such as full -# packet dumps. -# -cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Driver debug output verbosity -# The value of this option indicates the default verbosity -# level of debugging output. 0 means no debugging output -# is made by default. Higher values indicate higher verbosity. -# The verbosity level may also be changed at run time by -# changing the variable cyg_io_eth_net_debug. -# -cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Size of scatter-gather I/O lists -# A scatter-gather list is used to pass requests to/from -# the physical device driver. This list can typically be -# small, as the data is normally already packed into reasonable -# chunks. -# -cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 -}; - -# Support for standard eCos TCP/IP stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_NET { - # This option is not active - # ActiveIf constraint: CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 -}; - -# > -# Warn when there are no more mbufs -# Warnings about running out of mbufs are printed to the -# diagnostic output channel via diag_printf() if this option -# is enabled. Mbufs are the network stack's basic dynamic -# memory objects that hold all packets in transit; running -# out is bad for performance but not fatal, not a crash. -# You might want to turn off the warnings to preserve realtime -# properties of the system even in extremis. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Simulate network failures for testing -# This package contains a suite of simulated failure modes -# for the ethernet device layer, including dropping and/or -# corrupting received packets, dropping packets queued for -# transmission, and simulating a complete network break. -# It requires the kernel as a source of time information. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Drop incoming packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Corrupt incoming packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Drop outgoing packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Simulate a line cut from time to time -# This option causes the system to drop all packets for a -# short random period (10s of seconds), and then act -# normally for up to 4 times that long. This simulates your -# sysadmin fiddling with plugs in the network switch -# cupboard. -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# < -# Support for stand-alone network stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE { - # ActiveIf constraint: !CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 -}; - -# > -# Pass packets to an alternate stack -# Define this to allow packets seen by this layer to be -# passed on to the previous logical layer, i.e. when -# stand-alone processing replaces system (eCos) processing. -# -cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 0 != CYGPKG_REDBOOT_NETWORKING - # CYGPKG_REDBOOT_NETWORKING == 1 - # --> 1 -}; - -# Number of [network] buffers -# This option is used to allocate space to buffer incoming network -# packets. These buffers are used to hold data until they can be -# logically processed by higher layers. -# -cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 - # Legal values: 2 to 32 -}; - -# Show driver warnings -# Selecting this option will allows the stand-alone ethernet driver -# to display warnings on the system console when incoming network -# packets are being discarded due to lack of buffer space. -# -cdl_option CYGSEM_IO_ETH_DRIVERS_WARN { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Support for lwIP network stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP { - # This option is not active - # ActiveIf constraint: CYGPKG_NET_LWIP - # CYGPKG_NET_LWIP (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: !CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 1 -}; - -# Interrupt support required -# This interface is used to indicate to the low -# level device drivers that interrupt driven operation -# is required by higher layers. -# -cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED { - # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled - # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value -}; - -# Common ethernet support build options -# -cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the common ethernet support package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D_KERNEL -D__ECOS" - # value_source default - # Default value: "-D_KERNEL -D__ECOS" -}; - -# < -# Ethernet driver for Ka-Ro electronics TX53 processor module -# -cdl_package CYGPKG_DEVS_ETH_ARM_TX53 { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# FEC ethernet driver required -# -cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED { - # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # package CYGPKG_DEVS_ETH_FEC - # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED -}; - -# Ka-Ro TX53 ethernet port driver -# This option includes the ethernet device driver for the -# MXC Board port. -# -cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1 - # --> 1 - # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700 - # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1 - # --> 1 -}; - -# > -# Device name for the ETH0 ethernet driver -# This option sets the name of the ethernet device. -# -cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"eth0\"" - # value_source default - # Default value: "\"eth0\"" -}; - -# OUI part of MAC address -# This option sets OUI part (manufacturer ID) of the MAC address -# for validation. -# -cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI { - # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "{ 0x00, 0x0c, 0xc6 }" - # value_source default - # Default value: "{ 0x00, 0x0c, 0xc6 }" -}; - -# < -# < -# Driver for fast ethernet controller. -# Driver for fast ethernet controller. -# -cdl_package CYGPKG_DEVS_ETH_FEC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED - # CYGINT_DEVS_ETH_FEC_REQUIRED == 1 - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# MXC FEC ethernet driver build options -# -cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the Cirrus Logic ethernet driver package. -# These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D_KERNEL -D__ECOS" - # value_source default - # Default value: "-D_KERNEL -D__ECOS" -}; - -# < -# MXC FEC MII Gasket for RMII mode -# This option enables the use of the MII Gasket for -# RMII mode found in i.MX25 and i.MX53 processors. -# -cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK { - # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53 - # CYGPKG_HAL_ARM_MX25 (unknown) == 0 - # CYGPKG_HAL_ARM_MX53 == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Ethernet transceiver (PHY) support -# API for ethernet PHY devices -# -cdl_package CYGPKG_DEVS_ETH_PHY { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 -}; - -# > -# Enable driver debugging -# Enables the diagnostic debug messages on the -# console device. -# -cdl_option CYGDBG_DEVS_ETH_PHY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Time period (seconds) to wait for auto-negotiation -# The length of time to wait for auto-negotiation to complete -# before giving up and declaring the link dead/missing. -# -cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 5 - # value_source default - # Default value: 5 -}; - -# NSDP83847 -# Include support for National Semiconductor DP83847 DsPHYTER II -# -cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# AMD 79C874 -# Include support for AMD 79C874 NetPHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Intel LXT972 -# Include support for Intel LXT972xxx PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1890 -# Include support for ICS 1890 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1892 -# Include support for ICS 1892 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1893 -# Include support for ICS 1893 and 1893AF PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Davicom DM9161A -# Include support for the Davicom DM9161A PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Micrel KS8721 -# Include support for the Micrel KS8721 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# SMSC LAN8700 -# Include support for SMSC LAN8700 NetPHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 - # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700 -}; - -# < -# < -# ISO C library internationalization functions -# doc: ref/libc.html -# This package provides internationalization functions specified by the -# ISO C standard - ISO/IEC 9899:1990. These include locale-related -# functionality and functionality. -# -cdl_package CYGPKG_LIBC_I18N { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# > -# Supported locales -# These options determine which locales other than the "C" locale -# are supported and hence contribute to the size of the executable. -# -cdl_component CYGPKG_LIBC_I18N_LOCALES { - # There is no associated value. -}; - -# > -# Support for multiple locales required -# -cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED { - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "" - # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0 - # --> 0 - - # The following properties are affected by this value -}; - -# C-SJIS locale support -# This option controls if the "C-SJIS" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese SJIS multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# C-JIS locale support -# This option controls if the "C-JIS" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese JIS multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# C-EUCJP locale support -# This option controls if the "C-EUCJP" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese EUCJP multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# < -# Newlib's ctype implementation -# This option enables the implementation of the ctype functions -# that comes with newlib. It is table driven and therefore -# exhibits different performance characteristics. It also offers -# a limited amount of binary compatibility -# with newlib so that programs linked against newlib ctype/locale -# do not need to be recompiled when linked with eCos. -# -cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # CYGBLD_ISO_CTYPE_HEADER == - # --> 0 -}; - -# Per-thread multibyte state -# This option controls whether the multibyte character -# handling functions mblen(), mbtowc(), and wctomb(), -# have their state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Enabling this option will use three slots -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGVAR_KERNEL_THREADS_DATA != 0 - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Size of locale name strings -# This option controls the maximum size of -# locale names and is used, among other things -# to instantiate a static string used -# as a return value from the -# setlocale() function. When requesting the -# current locale settings with LC_ALL, a string -# must be constructed to contain this data, rather -# than just returning a constant string. This -# string data is stored in the static string. -# This depends on the length of locale names, -# hence this option. If just the C locale is -# present, this option can be set as low as 2. -# -cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 2 - # value_source default - # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) - # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0 - # --> 2 - # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0 -}; - -# Inline versions of functions -# This option chooses whether the simple character -# classification and conversion functions (e.g. -# isupper(), isalpha(), toupper(), etc.) -# from are available as inline -# functions. This may improve performance and as -# the functions are small, may even improve code -# size. -# -cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # CYGBLD_ISO_CTYPE_HEADER == - # --> 1 -}; - -# C library i18n functions build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_I18N_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library i18n function tests -# This option specifies the set of tests for the C library -# i18n functions. -# -cdl_option CYGPKG_LIBC_I18N_TESTS { - # Calculated value: "tests/ctype tests/setlocale tests/i18nmb" - # Flavor: data - # Current_value: tests/ctype tests/setlocale tests/i18nmb -}; - -# < -# < -# ISO C library general utility functions -# doc: ref/libc.html -# This package provides general utility functions in -# as specified by the ISO C standard - ISO/IEC 9899:1990. -# -cdl_package CYGPKG_LIBC_STDLIB { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 -}; - -# > -# Inline versions of functions -# This option chooses whether some of the -# particularly simple standard utility functions -# from are available as inline -# functions. This may improve performance, and as -# the functions are small, may even improve code -# size. -# -cdl_component CYGIMP_LIBC_STDLIB_INLINES { - # There is no associated value. -}; - -# > -# abs() / labs() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "" - # CYGBLD_ISO_STDLIB_ABS_HEADER == - # --> 1 -}; - -# div() / ldiv() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "" - # CYGBLD_ISO_STDLIB_DIV_HEADER == - # --> 1 -}; - -# atof() / atoi() / atol() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "" - # CYGBLD_ISO_STDLIB_STRCONV_HEADER == - # --> 1 -}; - -# < -# Random number generation -# These options control the behaviour of the -# functions rand(), srand() and rand_r() -# -cdl_component CYGPKG_LIBC_RAND { - # There is no associated value. -}; - -# > -# Per-thread random seed -# doc: ref/libc-thread-safety.html -# This option controls whether the pseudo-random -# number generation functions rand() and srand() -# have their state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Note there is also a POSIX-standard rand_r() -# function to achieve a similar effect with user -# support. Enabling this option will use one slot -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_PER_THREAD_RAND { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Random number seed -# This selects the initial random number seed for -# rand()'s pseudo-random number generator. For -# strict ISO standard compliance, this should be 1, -# as per section 7.10.2.2 of the standard. -# -cdl_option CYGNUM_LIBC_RAND_SEED { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Legal values: 0 to 0x7fffffff -}; - -# Tracing level -# Trace verbosity level for debugging the rand(), -# srand() and rand_r() functions. Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# Simplest implementation -# This provides a very simple implementation of rand() -# that does not perform well with randomness in the -# lower significant bits. However it is exceptionally -# fast. It uses the sample algorithm from the ISO C -# standard itself. -# -cdl_option CYGIMP_LIBC_RAND_SIMPLEST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Simple implementation #1 -# This provides a very simple implementation of rand() -# based on the simplest implementation above. However -# it does try to work around the lack of randomness -# in the lower significant bits, at the expense of a -# little speed. -# -cdl_option CYGIMP_LIBC_RAND_SIMPLE1 { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# Knuth implementation #1 -# This implements a slightly more complex algorithm -# published in Donald E. Knuth's Art of Computer -# Programming Vol.2 section 3.6 (p.185 in the 3rd ed.). -# This produces better random numbers than the -# simplest approach but is slower. -# -cdl_option CYGIMP_LIBC_RAND_KNUTH1 { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 -}; - -# < -# Provides strtod() -# This option allows use of the utility function -# strtod() (and consequently atof()) to convert -# from string to double precision floating point -# numbers. Disabling this option removes the -# dependency on the math library package. -# -cdl_option CYGFUN_LIBC_strtod { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 != CYGPKG_LIBM - # CYGPKG_LIBM (unknown) == 0 - # --> 0 - # Requires: CYGPKG_LIBM - # CYGPKG_LIBM (unknown) == 0 - # --> 0 -}; - -# Provides long long conversion functions -# Enabling this option will provide support for the strtoll(), -# strtoull() and atoll() conversion functions, which are -# the long long variants of the standard versions of these -# functions. Supporting this requires extra code and compile -# time. -# -cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# bsearch() tracing level -# Trace verbosity level for debugging the -# binary search function bsearch(). Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# qsort() tracing level -# Trace verbosity level for debugging the -# quicksort function qsort(). Increase this value -# to get additional trace output. -# -cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# C library stdlib build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_STDLIB_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library stdlib tests -# This option specifies the set of tests for this package. -# -cdl_option CYGPKG_LIBC_STDLIB_TESTS { - # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul" - # Flavor: data - # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul -}; - -# < -# < -# < -# eCos HAL -# doc: ref/the-ecos-hardware-abstraction-layer.html -# The eCos HAL package provide a porting layer for -# higher-level parts of the system such as the kernel and the -# C library. Each installation should have HAL packages for -# one or more architectures, and for each architecture there -# may be one or more supported platforms. It is necessary to -# select one target architecture and one platform for that -# architecture. There are also a number of configuration -# options that are common to all HAL packages. -# -cdl_package CYGPKG_HAL { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_INFRA - # CYGPKG_INFRA == current - # --> 1 - - # The following properties are affected by this value -}; - -# > -# Platform-independent HAL options -# A number of configuration options are common to most or all -# HAL packages, for example options controlling how much state -# should be saved during a context switch. The implementations -# of these options will vary from architecture to architecture. -# -cdl_component CYGPKG_HAL_COMMON { - # There is no associated value. -}; - -# > -# Provide eCos kernel support -# The HAL can be configured to either support the full eCos -# kernel, or to support only very simple applications which do -# not require a full kernel. If kernel support is not required -# then some of the startup, exception, and interrupt handling -# code can be eliminated. -# -cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - # Requires: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 -}; - -# HAL exception support -# When a processor exception occurs, for example an attempt to -# execute an illegal instruction or to perform a divide by -# zero, this exception may be handled in a number of different -# ways. If the target system has gdb support then typically -# the exception will be handled by gdb code. Otherwise if the -# HAL exception support is enabled then the HAL will invoke a -# routine deliver_exception(). Typically this routine will be -# provided by the eCos kernel, but it is possible for -# application code to provide its own implementation. If the -# HAL exception support is not enabled and a processor -# exception occurs then the behaviour of the system is -# undefined. -# -cdl_option CYGPKG_HAL_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_KERNEL_EXCEPTIONS - # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0 - # --> 0 - # Requires: CYGPKG_KERNEL_EXCEPTIONS - # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0 - # --> 0 -}; - -# Stop calling constructors early -# This option supports environments where some constructors -# must be run in the context of a thread rather than at -# simple system startup time. A boolean flag named -# cyg_hal_stop_constructors is set to 1 when constructors -# should no longer be invoked. It is up to some other -# package to deal with the rest of the constructors. -# In the current version this is only possible with the -# C library. -# -cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS - # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0 - # --> 0 -}; - -# HAL uses the MMU and allows for CDL manipulation of it's use -# -cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_HAL_INSTALL_MMU_TABLES - # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES -}; - -# Install MMU tables. -# This option controls whether this application installs -# its own Memory Management Unit (MMU) tables, or relies on the -# existing environment to run. -# -cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES - # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYG_HAL_STARTUP != "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_STATIC_MMU_TABLES - # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES -}; - -# Use static MMU tables. -# This option defines an environment where any Memory -# Management Unit (MMU) tables are constant. Normally used by ROM -# based environments, this provides a way to save RAM usage which -# would otherwise be required for these tables. -# -cdl_option CYGSEM_HAL_STATIC_MMU_TABLES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES - # CYGSEM_HAL_INSTALL_MMU_TABLES == 0 - # --> 0 -}; - -# Route diagnostic output to debug channel -# If not inheriting the console setup from the ROM monitor, -# it is possible to redirect diagnostic output to the debug -# channel by enabling this option. Depending on the debugger -# used it may also be necessary to select a mangler for the -# output to be displayed by the debugger. -# -cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN { - # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0 - # --> 1 - # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # CYGPKG_HAL_ARM == current - # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0 - # CYGPKG_HAL_V85X_V850 (unknown) == 0 - # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # The following properties are affected by this value - # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN -}; - -# > -# Mangler used on diag output -# It is sometimes necessary to mangle (encode) the -# diag ASCII text output in order for it to show up at the -# other end. In particular, GDB may silently ignore raw -# ASCII text. -# -cdl_option CYGSEM_HAL_DIAG_MANGLER { - # This option is not active - # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value GDB - # value_source default - # Default value: GDB - # Legal values: "GDB" "None" -}; - -# < -# < -# HAL interrupt handling -# A number of configuration options related to interrupt -# handling are common to most or all HAL packages, even though -# the implementations will vary from architecture to -# architecture. -# -cdl_component CYGPKG_HAL_COMMON_INTERRUPTS { - # There is no associated value. -}; - -# > -# Use separate stack for interrupts -# When an interrupt occurs this interrupt can be handled either -# on the current stack or on a separate stack maintained by the -# HAL. Using a separate stack requires a small number of extra -# instructions in the interrupt handling code, but it has the -# advantage that it is no longer necessary to allow extra space -# in every thread stack for the interrupt handlers. The amount -# of extra space required depends on the interrupt handlers -# that are being used. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # package CYGPKG_REDBOOT - # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 -}; - -# Interrupt stack size -# This configuration option specifies the stack size in bytes -# for the interrupt stack. Typically this should be a multiple -# of 16, but the exact requirements will vary from architecture -# to architecture. The interrupt stack serves two separate -# purposes. It is used as the stack during system -# initialization. In addition, if the interrupt system is -# configured to use a separate stack then all interrupts will -# be processed on this stack. The exact memory requirements -# will vary from application to application, and will depend -# heavily on whether or not other interrupt-related options, -# for example nested interrupts, are enabled. On most targets, -# in a configuration with no kernel this stack will also be -# the stack used to invoke the application, and must obviously -# be appropriately large in that case. -# -cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32768 - # value_source default - # Default value: CYGPKG_KERNEL ? 4096 : 32768 - # CYGPKG_KERNEL (unknown) == 0 - # --> 32768 - # Legal values: 128 to 1048576 -}; - -# Allow nested interrupts -# When an interrupt occurs the HAL interrupt handling code can -# either leave interrupts disabled for the duration of the -# interrupt handling code, or by doing some extra work it can -# reenable interrupts before invoking the interrupt handler and -# thus allow nested interrupts to happen. If all the interrupt -# handlers being used are small and do not involve any loops -# then it is usually better to disallow nested interrupts. -# However if any of the interrupt handlers are more complicated -# than nested interrupts will usually be required. -# -cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Save minimum context on interrupt -# The HAL interrupt handling code can exploit the calling conventions -# defined for a given architecture to reduce the amount of state -# that has to be saved. Generally this improves performance and -# reduces code size. However it can make source-level debugging -# more difficult. -# -cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT -}; - -# Chain all interrupts together -# Interrupts can be attached to vectors either singly, or be -# chained together. The latter is necessary if there is no way -# of discovering which device has interrupted without -# inspecting the device itself. It can also reduce the amount -# of RAM needed for interrupt decoding tables and code. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Ignore spurious [fleeting] interrupts -# On some hardware, interrupt sources may not be de-bounced or -# de-glitched. Rather than try to handle these interrupts (no -# handling may be possible), this option allows the HAL to simply -# ignore them. In most cases, if the interrupt is real it will -# reoccur in a detectable form. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# HAL context switch support -# A number of configuration options related to thread contexts -# are common to most or all HAL packages, even though the -# implementations will vary from architecture to architecture. -# -cdl_component CYGPKG_HAL_COMMON_CONTEXT { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Use minimum thread context -# The thread context switch code can exploit the calling -# conventions defined for a given architecture to reduce the -# amount of state that has to be saved during a context -# switch. Generally this improves performance and reduces -# code size. However it can make source-level debugging more -# difficult. -# -cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM -}; - -# < -# Explicit control over cache behaviour -# These options let the default behaviour of the caches -# be easily configurable. -# -cdl_component CYGPKG_HAL_CACHE_CONTROL { - # There is no associated value. -}; - -# > -# Enable DATA cache on startup -# Enabling this option will cause the data cache to be enabled -# as soon as practicable when eCos starts up. One would choose -# to disable this if the data cache cannot safely be turned on, -# such as a case where the cache(s) require additional platform -# specific setup. -# -cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# DATA cache mode on startup -# This option controls the mode the cache will be set to -# when enabled on startup. -# -cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value COPYBACK - # value_source default - # Default value: COPYBACK - # Legal values: "COPYBACK" "WRITETHRU" -}; - -# < -# Enable INSTRUCTION cache on startup -# Enabling this option will cause the instruction cache to be enabled -# as soon as practicable when eCos starts up. One would choose -# to disable this if the instruction cache cannot safely be turned on, -# such as a case where the cache(s) require additional platform -# specific setup. -# -cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Source-level debugging support -# If the source level debugger gdb is to be used for debugging -# application code then it may be necessary to configure in support -# for this in the HAL. -# -cdl_component CYGPKG_HAL_DEBUG { - # There is no associated value. -}; - -# > -# Support for GDB stubs -# The HAL implements GDB stubs for the target. -# -cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS -}; - -# Include GDB stubs in HAL -# This option causes a set of GDB stubs to be included into the -# system. On some target systems the GDB support will be -# provided by other means, for example by a ROM monitor. On -# other targets, especially when building a ROM-booting system, -# the necessary support has to go into the target library -# itself. When GDB stubs are include in a configuration, HAL -# serial drivers must also be included. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS - # CYGINT_HAL_DEBUG_GDB_STUBS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 0 - # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0 - # --> 1 - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGBLD_BUILD_COMMON_GDB_STUBS - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGPKG_HAL_GDB_FILEIO - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS - # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS -}; - -# Support for external break support in GDB stubs -# The HAL implements external break (or asynchronous interrupt) -# in the GDB stubs for the target. -# -cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK -}; - -# Include GDB external break support for stubs -# This option causes the GDB stub to add a serial interrupt handler -# which will listen for GDB break packets. This lets you stop the -# target asynchronously when using GDB, usually by hitting Control+C -# or pressing the STOP button. This option differs from -# CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when -# GDB stubs are present. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK - # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT -}; - -# Platform does not support CTRLC -# -cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 -}; - -# Include GDB external break support when no stubs -# This option adds an interrupt handler for the GDB serial line -# which will listen for GDB break packets. This lets you stop the -# target asynchronously when using GDB, usually by hitting Control+C -# or pressing the STOP button. This option differs from -# CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB -# stubs are NOT present. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT { - # This option is not active - # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 - # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 - # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT -}; - -# Include GDB multi-threading debug support -# This option enables some extra HAL code which is needed -# to support multi-threaded source level debugging. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT { - # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # CYGSEM_HAL_ROM_MONITOR == 1 - # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # option CYGBLD_BUILD_REDBOOT_WITH_THREADS - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT -}; - -# Number of times to retry sending a $O packet -# This option controls the number of attempts that eCos programs -# will make to send a $O packet to a host GDB process. If it is -# set non-zero, then the target process will attempt to resend the -# $O packet data up to this number of retries. Caution: use of -# this option is not recommended as it can thoroughly confuse the -# host GDB process. -# -cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Timeout period for GDB packets -# This option controls the time (in milliseconds) that eCos programs -# will wait for a response when sending packets to a host GDB process. -# If this time elapses, then the packet will be resent, up to some -# maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES). -# -cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 500 - # value_source default - # Default value: 500 -}; - -# Location of CRC32 table -# The stubs use a 1 kilobyte CRC table that can either be pregenerated -# and placed in ROM, or generated at runtime in RAM. Depending on -# your memory constraints, one of these options may be better. -# -cdl_option CYGDBG_HAL_CRCTABLE_LOCATION { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value RAM - # value_source default - # Default value: RAM - # Legal values: "ROM" "RAM" -}; - -# < -# ROM monitor support -# Support for ROM monitors can be built in to your application. -# It may also be relevant to build your application as a ROM monitor -# itself. Such options are contained here if relevant for your chosen -# platform. The options and ROM monitors available to choose are -# platform-dependent. -# -cdl_component CYGPKG_HAL_ROM_MONITOR { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Target has virtual vector support -# -cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT -}; - -# Target supports baud rate control via vectors -# Whether this target supports the __COMMCTL_GETBAUD -# and __COMMCTL_SETBAUD virtual vector comm control operations. -# -cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT { - # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE - # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT -}; - -# Enable use of virtual vector calling interface -# Virtual vector support allows the HAL to let the ROM -# monitor handle certain operations. The virtual vector table -# defines a calling interface between applications running in -# RAM and the ROM monitor. -# -cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT { - # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # package CYGPKG_DEVS_ETH_PHY - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT -}; - -# > -# Inherit console settings from ROM monitor -# When this option is set, the application will inherit -# the console as set up by the ROM monitor. This means -# that the application will use whatever channel and -# mangling style was used by the ROM monitor when -# the application was launched. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE { - # This option is not active - # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 0 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN -}; - -# Debug channel is configurable -# This option is a configuration hint - it is enabled -# when the HAL initialization code will make use -# of the debug channel configuration option. -# -cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE { - # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL - # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE -}; - -# Console channel is configurable -# This option is a configuration hint - it is enabled -# when the HAL initialization code will make use -# of the console channel configuration option. -# -cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE { - # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0 - # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE -}; - -# Initialize whole of virtual vector table -# This option will cause the whole of the virtual -# vector table to be initialized with dummy values on -# startup. When this option is enabled, all the -# options below must also be enabled - or the -# table would be empty when the application -# launches. -# On targets where older ROM monitors without -# virtual vector support may still be in use, it is -# necessary for RAM applictions to initialize the -# table (since all HAL diagnostics and debug IO -# happens via the table). -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR - # CYG_HAL_STARTUP == ROMRAM - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS -}; - -# Claim virtual vector table entries by default -# By default most virtual vectors will be claimed by -# RAM startup configurations, meaning that the RAM -# application will provide the services. The -# exception is COMMS support (HAL -# diagnostics/debugging IO) which is left in the -# control of the ROM monitor. -# The reasoning behind this is to get as much of the -# code exercised during regular development so it -# is known to be working the few times a new ROM -# monitor or a ROM production configuration is used -# - COMMS are excluded only by necessity in order to -# avoid breaking an existing debugger connections -# (there may be ways around this). -# For production RAM configurations this option can -# be switched off, causing the appliction to rely on -# the ROM monitor for these services, thus -# saving some space. -# Individual vectors may also be left unclaimed, -# controlled by the below options (meaning that the -# associated service provided by the ROM monitor -# will be used). -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT { - # This option is not active - # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT -}; - -# Claim reset virtual vectors -# This option will cause the reset and kill_by_reset -# virtual vectors to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET -}; - -# Claim version virtual vectors -# This option will cause the version -# virtual vectors to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # --> 1 -}; - -# Claim delay_us virtual vector -# This option will cause the delay_us -# virtual vector to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US -}; - -# Claim cache virtual vectors -# This option will cause the cache virtual vectors -# to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE -}; - -# Claim data virtual vectors -# This option will cause the data virtual vectors -# to be claimed. At present there is only one, used -# by the RedBoot ethernet driver to share diag output. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA -}; - -# Claim comms virtual vectors -# This option will cause the communication tables -# that are part of the virtual vectors mechanism to -# be claimed. Note that doing this may cause an -# existing ROM monitor communication connection to -# be closed. For this reason, the option is disabled -# per default for normal application -# configurations. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE - # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS -}; - -# Do diagnostic IO via virtual vector table -# All HAL IO happens via the virtual vector table / comm -# tables when those tables are supported by the HAL. -# If so desired, the low-level IO functions can -# still be provided by the RAM application by -# enabling the CLAIM_COMMS option. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG { - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS -}; - -# < -# Behave as a ROM monitor -# Enable this option if this program is to be used as a ROM monitor, -# i.e. applications will be loaded into RAM on the TX53 module, and this -# ROM monitor may process exceptions or interrupts generated from the -# application. This enables features such as utilizing a separate -# interrupt stack when exceptions are generated. -# -cdl_option CYGSEM_HAL_ROM_MONITOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # CYG_HAL_STARTUP == ROMRAM - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) - # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # option CYGPRI_REDBOOT_ROM_MONITOR - # Requires: CYGSEM_HAL_ROM_MONITOR -}; - -# Work with a ROM monitor -# Support can be enabled for different varieties of ROM monitor. -# This support changes various eCos semantics such as the encoding -# of diagnostic output, or the overriding of hardware interrupt -# vectors. -# Firstly there is "Generic" support which prevents the HAL -# from overriding the hardware vectors that it does not use, to -# instead allow an installed ROM monitor to handle them. This is -# the most basic support which is likely to be common to most -# implementations of ROM monitor. -# "GDB_stubs" provides support when GDB stubs are included in -# the ROM monitor or boot ROM. -# -cdl_option CYGSEM_HAL_USE_ROM_MONITOR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 - # CYG_HAL_STARTUP == ROMRAM - # --> 0 0 - # Legal values: "Generic" "GDB_stubs" - # Requires: CYG_HAL_STARTUP == "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR -}; - -# < -# Platform defined I/O channels. -# Platforms which provide additional I/O channels can implement -# this interface, indicating that the function plf_if_init() -# needs to be called. -# -cdl_interface CYGINT_HAL_PLF_IF_INIT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Platform IDE I/O support. -# Platforms which provide IDE controllers can implement -# this interface, indicating that IDE I/O macros are -# available. -# -cdl_interface CYGINT_HAL_PLF_IF_IDE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_DISK_IDE - # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0 -}; - -# File I/O operations via GDB -# This option enables support for various file I/O -# operations using the GDB remote protocol to communicate -# with GDB. The operations are then performed on the -# debugging host by proxy. These operations are only -# currently available by using a system call interface -# to RedBoot. This may change in the future. -# -cdl_option CYGPKG_HAL_GDB_FILEIO { - # This option is not active - # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS - # CYGSEM_REDBOOT_BSP_SYSCALLS == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 -}; - -# Build Compiler sanity checking tests -# Enabling this option causes compiler tests to be built. -# -cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_HAL_TESTS - # Calculated: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") -}; - -# Common HAL tests -# This option specifies the set of tests for the common HAL. -# -cdl_component CYGPKG_HAL_TESTS { - # Calculated value: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") - # CYGINT_HAL_TESTS_NO_CACHES == 0 - # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0 - # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0 - # Flavor: data - # Current_value: tests/context tests/basic tests/cache tests/intr -}; - -# > -# Interface for cache presence -# Some architectures and/or platforms do not have caches. By -# implementing this interface, these can disable the various -# cache-related tests. -# -cdl_interface CYGINT_HAL_TESTS_NO_CACHES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value - # component CYGPKG_HAL_TESTS - # Calculated: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") -}; - -# < -# ARM architecture -# The ARM architecture HAL package provides generic -# support for this processor architecture. It is also -# necessary to select a specific target platform HAL -# package. -# -cdl_package CYGPKG_HAL_ARM { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED - # ActiveIf: CYGPKG_HAL_ARM -}; - -# > -# The CPU architecture supports THUMB mode -# -cdl_interface CYGINT_HAL_ARM_THUMB_ARCH { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_THUMB - # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0 -}; - -# Enable Thumb instruction set -# Enable use of the Thumb instruction set. -# -cdl_option CYGHWR_THUMB { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # CYGINT_HAL_ARM_THUMB_ARCH == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) -}; - -# Enable Thumb interworking compiler option -# This option controls the use of -mthumb-interwork in the -# compiler flags. It defaults enabled in Thumb or ROM monitor -# configurations, but can be overridden for reduced memory -# footprint where interworking is not a requirement. -# -cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # CYGINT_HAL_ARM_THUMB_ARCH == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) - # CYGHWR_THUMB == 0 - # CYGSEM_HAL_ROM_MONITOR == 1 - # --> 1 -}; - -# The platform and architecture supports Big Endian operation -# -cdl_interface CYGINT_HAL_ARM_BIGENDIAN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_BIGENDIAN - # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0 -}; - -# Use big-endian mode -# Use the CPU in big-endian mode. -# -cdl_option CYGHWR_HAL_ARM_BIGENDIAN { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0 - # CYGINT_HAL_ARM_BIGENDIAN == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# The platform uses a processor with an ARM7 core -# -cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with an ARM9 core -# -cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 { - # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with a StrongARM core -# -cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with a XScale core -# -cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# ARM CPU family -# It is possible to optimize code for different -# ARM CPU families. This option selects which CPU to -# optimize for on boards that support multiple CPU types. -# -cdl_option CYGHWR_HAL_ARM_CPU_FAMILY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value ARM9 - # value_source default - # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" - # CYGINT_HAL_ARM_ARCH_ARM7 == 0 - # CYGINT_HAL_ARM_ARCH_ARM9 == 1 - # CYGINT_HAL_ARM_ARCH_STRONGARM == 0 - # CYGINT_HAL_ARM_ARCH_XSCALE == 0 - # --> ARM9 - # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # CYGINT_HAL_ARM_ARCH_ARM7 == 0 - # CYGINT_HAL_ARM_ARCH_ARM9 == 1 - # CYGINT_HAL_ARM_ARCH_STRONGARM == 0 - # CYGINT_HAL_ARM_ARCH_XSCALE == 0 -}; - -# Provide diagnostic dump for exceptions -# Print messages about hardware exceptions, including -# raw exception frame dump and register contents. -# -cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 -}; - -# Process all exceptions with the eCos application -# Normal RAM-based programs which do not include GDB stubs -# defer processing of the illegal instruction exception to GDB. -# Setting this options allows the program to explicitly handle -# the illegal instruction exception itself. Note: this will -# prevent the use of GDB to debug the application as breakpoints -# will no longer work. -# -cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Support GDB thread operations via ICE/Multi-ICE -# Allow GDB to get thread information via the ICE/Multi-ICE -# connection. -# -cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1 - # --> 1 - # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0 - # --> 0 -}; - -# Support for 'gprof' callbacks -# The ARM HAL provides the macro for 'gprof' callbacks from RedBoot -# to acquire the interrupt-context PC and SP, when this option is -# active. -# -cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT { - # This option is not active - # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS - # CYGSEM_REDBOOT_BSP_SYSCALLS == 0 - # --> 0 - # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0 - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 0 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Accept exceptions and irq's occurring in user mode -# For standalone Redboot based programs running in user mode. -# -cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Preserve svc spsr before returning to svc mode -# This option secures exception and breakpoint processing -# triggered during execution of application specific SWI -# handlers. -# -cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Linker script -# -cdl_option CYGBLD_LINKER_SCRIPT { - # Calculated value: "src/arm.ld" - # Flavor: data - # Current_value: src/arm.ld -}; - -# Implementations of hal_arm_mem_real_region_top() -# -cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Freescale SoC architecture -# This HAL variant package provides generic -# support for the Freescale SoC. It is also -# necessary to select a specific target platform HAL -# package. -# -cdl_package CYGPKG_HAL_ARM_MX53 { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK - # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53 -}; - -# > -# Processor clock rate -# The processor can run at various frequencies. -# These values are expressed in KHz. Note that there are -# several steppings of the rate to run at different -# maximum frequencies. Check the specs to make sure that your -# particular processor can run at the rate you select here. -# -cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK { - # This option is not active - # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 150000 - # value_source default - # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ? - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000 - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0 - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0 - # --> 150000 - # Legal values: 150000 200000 -}; - -# Real-time clock constants -# -cdl_component CYGNUM_HAL_RTC_CONSTANTS { - # There is no associated value. -}; - -# > -# Real-time clock numerator -# -cdl_option CYGNUM_HAL_RTC_NUMERATOR { - # Calculated value: 1000000000 - # Flavor: data - # Current_value: 1000000000 -}; - -# Real-time clock denominator -# This option selects the heartbeat rate for the real-time clock. -# The rate is specified in ticks per second. Change this value -# with caution - too high and your system will become saturated -# just handling clock interrupts, too low and some operations -# such as thread scheduling may become sluggish. -# -cdl_option CYGNUM_HAL_RTC_DENOMINATOR { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 100 - # value_source default - # Default value: 100 - - # The following properties are affected by this value - # option CYGNUM_HAL_RTC_PERIOD - # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR) -}; - -# Real-time clock period -# -cdl_option CYGNUM_HAL_RTC_PERIOD { - # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR) - # CYGNUM_HAL_RTC_DENOMINATOR == 100 - # Flavor: data - # Current_value: 36864 -}; - -# < -# UART1 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART1 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART2 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART2 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART3 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART3 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART4 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART4 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART5 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART5 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Ka-Ro TX53 module -# This HAL platform package provides generic -# support for the Ka-Ro electronics TX53 module. -# -cdl_package CYGPKG_HAL_ARM_TX53KARO { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - # Requires: CYGBLD_BUILD_REDBOOT == 1 - # CYGBLD_BUILD_REDBOOT == 1 - # --> 1 -}; - -# > -# Startup type -# The only startup type allowed is ROMRAM, since this will allow -# the program to exist in ROM, but be copied to RAM during startup -# which is required to boot from NAND flash. -# -cdl_component CYG_HAL_STARTUP { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value ROMRAM - # value_source default - # Default value: ROMRAM - # Legal values: "ROMRAM" "RAM" - - # The following properties are affected by this value - # option CYGSEM_HAL_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGSEM_HAL_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGSEM_HAL_USE_ROM_MONITOR - # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 - # option CYGSEM_HAL_USE_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "RAM" - # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK - # ActiveIf: CYG_HAL_STARTUP == "ROM" - # option CYGSEM_HAL_INSTALL_MMU_TABLES - # DefaultValue: CYG_HAL_STARTUP != "RAM" - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR - # option CYGBLD_BUILD_REDBOOT_WITH_THREADS - # ActiveIf: CYG_HAL_STARTUP != "RAM" - # option CYGPRI_REDBOOT_ROM_MONITOR - # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGPRI_REDBOOT_ROM_MONITOR - # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" -}; - -# Diagnostic serial port baud rate -# This option selects the baud rate used for the console port. -# Note: this should match the value chosen for the GDB port if the -# console and GDB port are the same. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 115200 - # value_source default - # Default value: 115200 - # Legal values: 9600 19200 38400 57600 115200 -}; - -# GDB serial port baud rate -# This option selects the baud rate used for the GDB port. -# Note: this should match the value chosen for the console port if the -# console and GDB port are the same. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 115200 - # value_source default - # Default value: 115200 - # Legal values: 9600 19200 38400 57600 115200 -}; - -# Number of communication channels on the TX53 -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS { - # Calculated value: 5 - # Flavor: data - # Current_value: 5 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 -}; - -# Debug serial port -# The TX53 provides access to five serial ports. This option -# chooses which port will be used to connect to a host -# running GDB. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL { - # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE - # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5 -}; - -# Default console channel. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT { - # Calculated value: 0 - # Flavor: data - # Current_value: 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT -}; - -# Console serial port -# The TX53 provides access to three serial ports. This option -# chooses which port will be used for console output. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL { - # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT - # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0 - # --> 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5 -}; - -# Ka-Ro electronics TX53 module build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS { - # There is no associated value. - # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 -}; - -# > -# SDRAM size -# This option specifies the SDRAM size of the TX53 module. -# -cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x20000000 - # value_source default - # Default value: 0x20000000 - # Legal values: 0x40000000 0x20000000 -}; - -# SDRAM clock -# This option specifies the SDRAM clock im MHz of the TX53 module. -# -cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_CLK { - # Flavor: data - user_value 333 - # value_source user - # Default value: 400 - # Legal values: 216 266 333 400 -}; - -# CPU clock -# This option specifies the CPU clock in MHz of the TX51 module. -# -cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1000 - # value_source default - # Default value: 1000 - # Legal values: 800 1000 -}; - -# Enable low level debugging with LED -# This option enables low level debugging by blink codes -# of the LED on STK5. -# -cdl_option CYGOPT_HAL_ARM_TX53_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: false - # false (unknown) == 0 - # --> 0 -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the TX53 HAL. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the TX53 HAL. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Show a splash screen from the FIS partition: 'logo' -# When this option is enabled, RedBoot will look for a flash partition -# named 'logo' and display the contents of this partition as initial -# screen on the LCD -# -cdl_option CYGHWR_MX53_LCD_LOGO { - # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU - # CYGPKG_DEVS_IMX_IPU == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Memory layout -# -cdl_component CYGHWR_MEMORY_LAYOUT { - # Calculated value: "arm_tx53_romram" - # Flavor: data - # Current_value: arm_tx53_romram -}; - -# > -# Memory layout linker script fragment -# -cdl_option CYGHWR_MEMORY_LAYOUT_LDI { - # Calculated value: "" - # Flavor: data - # Current_value: -}; - -# Memory layout header file -# -cdl_option CYGHWR_MEMORY_LAYOUT_H { - # Calculated value: "" - # Flavor: data - # Current_value: -}; - -# < -# < -# < -# < -# < -# Infrastructure -# Common types and useful macros. -# Tracing and assertion facilities. -# Package startup options. -# -cdl_package CYGPKG_INFRA { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # package CYGPKG_HAL - # Requires: CYGPKG_INFRA - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGPKG_INFRA -}; - -# > -# Asserts & Tracing -# The eCos source code contains a significant amount of -# internal debugging support, in the form of assertions and -# tracing. -# Assertions check at runtime that various conditions are as -# expected; if not, execution is halted. -# Tracing takes the form of text messages that are output -# whenever certain events occur, or whenever functions are -# called or return. -# The most important property of these checks and messages is -# that they are not required for the program to run. -# It is prudent to develop software with assertions enabled, -# but disable them when making a product release, thus -# removing the overhead of that checking. -# It is possible to enable assertions and tracing -# independently. -# There are also options controlling the exact behaviour of -# the assertion and tracing facilities, thus giving users -# finer control over the code and data size requirements. -# -cdl_component CYGPKG_INFRA_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD - # ActiveIf: CYGPKG_INFRA_DEBUG -}; - -# > -# Use asserts -# If this option is defined, asserts in the code are tested. -# Assert functions (CYG_ASSERT()) are defined in -# 'include/cyg/infra/cyg_ass.h' within the 'install' tree. -# If it is not defined, these result in no additional -# object code and no checking of the asserted conditions. -# -cdl_component CYGDBG_USE_ASSERTS { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG - # Requires: CYGDBG_USE_ASSERTS - # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG - # DefaultValue: 0 != CYGDBG_USE_ASSERTS -}; - -# > -# Preconditions -# This option allows individual control of preconditions. -# A precondition is one type of assert, which it is -# useful to control separately from more general asserts. -# The function is CYG_PRECONDITION(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Postconditions -# This option allows individual control of postconditions. -# A postcondition is one type of assert, which it is -# useful to control separately from more general asserts. -# The function is CYG_POSTCONDITION(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Loop invariants -# This option allows individual control of loop invariants. -# A loop invariant is one type of assert, which it is -# useful to control separately from more general asserts, -# particularly since a loop invariant is typically evaluated -# a great many times when used correctly. -# The function is CYG_LOOP_INVARIANT(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use assert text -# All assertions within eCos contain a text message -# which should give some information about the condition -# being tested. -# These text messages will end up being embedded in the -# application image and hence there is a significant penalty -# in terms of image size. -# It is possible to suppress the use of these messages by -# disabling this option. -# This results in smaller code size, but there is less -# human-readable information if an assertion actually gets -# triggered. -# -cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Use tracing -# If this option is defined, tracing operations -# result in output or logging, depending on other options. -# This may have adverse effects on performance, if the time -# taken to output message overwhelms the available CPU -# power or output bandwidth. -# Trace functions (CYG_TRACE()) are defined in -# 'include/cyg/infra/cyg_trac.h' within the 'install' tree. -# If it is not defined, these result in no additional -# object code and no trace information. -# -cdl_component CYGDBG_USE_TRACING { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT - # ActiveIf: CYGDBG_USE_TRACING -}; - -# > -# Trace function reports -# This option allows individual control of -# function entry/exit tracing, independent of -# more general tracing output. -# This may be useful to remove clutter from a -# trace log. -# -cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS { - # This option is not active - # The parent CYGDBG_USE_TRACING is not active - # The parent CYGDBG_USE_TRACING is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use trace text -# All trace calls within eCos contain a text message -# which should give some information about the circumstances. -# These text messages will end up being embedded in the -# application image and hence there is a significant penalty -# in terms of image size. -# It is possible to suppress the use of these messages by -# disabling this option. -# This results in smaller code size, but there is less -# human-readable information available in the trace output, -# possibly only filenames and line numbers. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE { - # This option is not active - # The parent CYGDBG_USE_TRACING is not active - # The parent CYGDBG_USE_TRACING is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Trace output implementations -# -cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL { - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # component CYGDBG_USE_ASSERTS - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # component CYGDBG_USE_TRACING - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL -}; - -# Null output -# A null output module which is useful when -# debugging interactively; the output routines -# can be breakpointed rather than have them actually -# 'print' something. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Simple output -# An output module which produces simple output -# from tracing and assertion events. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Fancy output -# An output module which produces fancy output -# from tracing and assertion events. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Buffered tracing -# An output module which buffers output -# from tracing and assertion events. The stored -# messages are output when an assert fires, or -# CYG_TRACE_PRINT() (defined in ) -# is called. -# Of course, there will only be stored messages -# if tracing per se (CYGDBG_USE_TRACING) -# is enabled above. -# -cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Trace buffer size -# The size of the trace buffer. This counts the number -# of trace records stored. When the buffer fills it -# either wraps, stops recording, or generates output. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 - # Legal values: 5 to 65535 -}; - -# Wrap trace buffer when full -# When the trace buffer has filled with records it -# starts again at the beginning. Hence only the last -# CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will -# be recorded. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Halt trace buffer when full -# When the trace buffer has filled with records it -# stops recording. Hence only the first -# CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will -# be recorded. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Print trace buffer when full -# When the trace buffer has filled with records it -# prints the contents of the buffer. The buffer is then -# emptied and the system continues. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Print trace buffer on assert fail -# When an assertion fails the trace buffer will be -# printed to the default diagnostic device. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Use function names -# All trace and assert calls within eCos contain a -# reference to the builtin macro '__PRETTY_FUNCTION__', -# which evaluates to a string containing -# the name of the current function. -# This is useful when reading a trace log. -# It is possible to suppress the use of the function name -# by disabling this option. -# This results in smaller code size, but there is less -# human-readable information available in the trace output, -# possibly only filenames and line numbers. -# -cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Startup options -# Some packages require a startup routine to be called. -# This can be carried out by application code, by supplying -# a routine called cyg_package_start() which calls the -# appropriate package startup routine(s). -# Alternatively, this routine can be constructed automatically -# and configured to call the startup routines of your choice. -# -cdl_component CYGPKG_INFRA_STARTUP { - # There is no associated value. -}; - -# > -# Start uITRON subsystem -# Generate a call to initialize the -# uITRON compatibility subsystem -# within the system version of cyg_package_start(). -# This enables compatibility with uITRON. -# You must configure uITRON with the correct tasks before -# starting the uItron subsystem. -# If this is disabled, and you want to use uITRON, -# you must call cyg_uitron_start() from your own -# cyg_package_start() or cyg_userstart(). -# -cdl_option CYGSEM_START_UITRON_COMPATIBILITY { - # This option is not active - # ActiveIf constraint: CYGPKG_UITRON - # CYGPKG_UITRON (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGPKG_UITRON - # CYGPKG_UITRON (unknown) == 0 - # --> 0 -}; - -# < -# Smaller slower memcpy() -# Enabling this option causes the implementation of -# the standard memcpy() routine to reduce code -# size at the expense of execution speed. This -# option is automatically enabled with the use of -# the -Os option to the compiler. Also note that -# the compiler will try to use its own builtin -# version of memcpy() if possible, ignoring the -# implementation in this package, unless given -# the -fno-builtin compiler option. -# -cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Smaller slower memset() -# Enabling this option causes the implementation of -# the standard memset() routine to reduce code -# size at the expense of execution speed. This -# option is automatically enabled with the use of -# the -Os option to the compiler. Also note that -# the compiler will try to use its own builtin -# version of memset() if possible, ignoring the -# implementation in this package, unless given -# the -fno-builtin compiler option. -# -cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide empty C++ delete functions -# To deal with virtual destructors, where the correct delete() -# function must be called for the derived class in question, the -# underlying delete is called when needed, from destructors. This -# is regardless of whether the destructor is called by delete itself. -# So there is a reference to delete() from all destructors. The -# default builtin delete() attempts to call free() if there is -# one defined. So, if you have destructors, and you have free(), -# as in malloc() and free(), any destructor counts as a reference -# to free(). So the dynamic memory allocation code is linked -# in regardless of whether it gets explicitly called. This -# increases code and data size needlessly. -# To defeat this undesirable behaviour, we define empty versions -# of delete and delete. But doing this prevents proper use -# of dynamic memory in C++ programs via C++'s new and delete -# operators. -# Therefore, this option is provided -# for explicitly disabling the provision of these empty functions, -# so that new and delete can be used, if that is what is required. -# -cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Threshold for valid number of delete calls -# Some users don't know about the empty delete function and then -# wonder why their C++ classes are leaking memory. If -# INFRA_DEBUG is enabled we keep a counter for the number of -# times delete is called. If it goes above this threshold we throw -# an assertion failure. This should point heavy users of -# delete in the right direction without upsetting those who want -# an empty delete function. -# -cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD { - # This option is not active - # ActiveIf constraint: CYGPKG_INFRA_DEBUG - # CYGPKG_INFRA_DEBUG == 0 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 100 - # value_source default - # Default value: 100 -}; - -# Provide dummy abort() function -# This option controls the inclusion of a dummy abort() function. -# Parts of the C and C++ compiler runtime systems contain references -# to abort(), particulary in the C++ exception handling code. It is -# not possible to eliminate these references, so this dummy function -# in included to satisfy them. It is not expected that this function -# will ever be called, so its current behaviour is to simply loop. -# -cdl_option CYGFUN_INFRA_DUMMY_ABORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGINT_ISO_EXIT == 0 - # CYGINT_ISO_EXIT == 0 - # --> 1 - # Requires: !CYGINT_ISO_EXIT - # CYGINT_ISO_EXIT == 0 - # --> 1 -}; - -# Reset platform at end of test case execution -# If this option is set then test case programs will reset the platform -# when they terminate, as opposed to the default which is to just hang -# in a loop. -# -cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide dummy strlen() function -# This option controls the inclusion of a dummy strlen() function. -# Parts of the C and C++ compiler runtime systems contain references -# to strlen(), particulary in the C++ exception handling code. It is -# not possible to eliminate these references, so this dummy function -# in included to satisfy them. While it is not expected that this function -# will ever be called, it is functional but uses the simplest, smallest -# algorithm. There is a faster version of strlen() in the C library. -# -cdl_option CYGFUN_INFRA_DUMMY_STRLEN { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGINT_ISO_STRING_STRFUNCS == 0 - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 0 - # Requires: !CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 0 -}; - -# Make all compiler warnings show as errors -# Enabling this option will cause all compiler warnings to show -# as errors and bring the library build to a halt. This is used -# to ensure that the code base is warning free, and thus ensure -# that newly introduced warnings stand out and get fixed before -# they show up as weird run-time behavior. -# -cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror") - # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_GLOBAL_CFLAGS - # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS -}; - -# Make compiler and assembler communicate by pipe -# Enabling this option will cause the compiler to feed the -# assembly output the the assembler via a pipe instead of -# via a temporary file. This normally reduces the build -# time. -# -cdl_option CYGBLD_INFRA_CFLAGS_PIPE { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe") - # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # --> 1 -}; - -# Infra build options -# Package specific build options including control over -# compiler flags used only in building this package. -# -cdl_component CYGPKG_INFRA_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are used -# in addition to the set of global flags. -# -cdl_option CYGPKG_INFRA_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# Suppressed linker flags -# This option modifies the set of linker flags for -# building the eCos infra package tests. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wl,--gc-sections - # value_source default - # Default value: -Wl,--gc-sections -}; - -# Additional linker flags -# This option modifies the set of linker flags for -# building the eCos infra package tests. These flags are added to -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_LDFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wl,--fatal-warnings - # value_source default - # Default value: -Wl,--fatal-warnings -}; - -# Infra package tests -# -cdl_component CYGPKG_INFRA_TESTS { - # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2" - # Flavor: data - # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2 -}; - -# > -# Number of times a test runs -# This option controls the number of times tests will execute their -# basic function. Not all tests will honor this setting, but those -# that do will execute the test N times before terminating. A value -# less than 0 indicates to run forever. -# -cdl_option CYGNUM_TESTS_RUN_COUNT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# < -# < -# Redboot ROM monitor -# doc: ref/redboot.html -# This package supports the Redboot [stand-alone debug monitor] -# using eCos as the underlying board support mechanism. -# -cdl_package CYGPKG_REDBOOT { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 - # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 - # --> 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_ARM_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # component CYGPKG_REDBOOT_HAL_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # option CYGSEM_IO_ETH_DRIVERS_WARN - # ActiveIf: CYGPKG_REDBOOT -}; - -# > -# Include support for ELF file format -# -cdl_component CYGSEM_REDBOOT_ELF { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Use the virtual address in the ELF headers -# The ELF headers contain both a virtual and a physical address -# for where code/data should be loaded. By default the physical -# address is used but sometimes it is necassary to use the -# virtual address because of bugy toolchains -# -cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Methods of loading images using redboot -# -cdl_interface CYGINT_REDBOOT_LOAD_METHOD { - # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled - # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 2 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_REDBOOT_LOAD_METHOD -}; - -# Build Redboot ROM ELF image -# This option enables the building of the Redboot ELF image. -# The image may require further relocation or symbol -# stripping before being converted to a binary image. -# This is handled by a rule in the target CDL. -# -cdl_component CYGBLD_BUILD_REDBOOT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYGPKG_INFRA - # CYGPKG_INFRA == current - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - # Requires: CYGINT_REDBOOT_LOAD_METHOD - # CYGINT_REDBOOT_LOAD_METHOD == 2 - # --> 1 - - # The following properties are affected by this value - # package CYGPKG_HAL_ARM_TX53KARO - # Requires: CYGBLD_BUILD_REDBOOT == 1 - # option CYGBLD_BUILD_REDBOOT_BIN - # ActiveIf: CYGBLD_BUILD_REDBOOT -}; - -# > -# Include GDB support in RedBoot -# RedBoot normally includes support for the GDB debugging -# protocols. This option allows this to be disabled which -# may yield a substantial savings in terms of code and memory -# usage by RedBoot. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS - # CYGINT_HAL_DEBUG_GDB_STUBS == 1 - # --> 1 - - # Flavor: bool - user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source user - # Default value: 1 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 0 -}; - -# Threads debugging support -# Enabling this option will include special code in the -# GDB stubs to support debugging of threaded programs. In -# the case of eCos programs, this support allows GDB to -# have complete access to the eCos threads in the -# program. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS { - # ActiveIf constraint: CYG_HAL_STARTUP != "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1 - # --> 1 -}; - -# Customized version string -# Use this option to define a customized version "string" for -# RedBoot. Note: this value is only cosmetic, displayed by the -# "version" command, but is useful for providing site specific -# information about the RedBoot configuration. -# -cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 "Ka-Ro 2010-01-06" - # value_source inferred - # Default value: 0 0 -}; - -# Enable command line editing -# If this option is non-zero, RedBoot will remember the -# last N command lines. These lines may be reused. -# Enabling this history will also enable rudimentary -# editting of the lines themselves. -# -cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 16 - # value_source default - # Default value: 16 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES - # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0 - # option CYGBLD_REDBOOT_CMD_LINE_HISTORY - # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 -}; - -# Enable command line editing using ANSI arrows, etc -# If this option is enabled, RedBoot will accept standard ANSI key -# sequences for cursor movement (along with the emacs style keys). -# -cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES { - # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0 - # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Enable history command and expansion -# Enabling this option will allow RedBoot to provide a -# history command to list previous commands. Also enables -# history expansion via '!' character similar to bash -# shell. -# -cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 - # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16 - # --> 1 -}; - -# Number of unique RAM segments on platform -# Change this option to be the number of memory segments which are -# supported by the platform. If the value is greater than 1, then -# a platform specific function must provide information about the -# additional segments. -# -cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include support gzip/zlib decompression -# -cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB { - # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB - # CYGPKG_COMPRESS_ZLIB == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS -}; - -# > -# Size of zlib decompression buffer -# This is the size of the buffer filled with incoming data -# during load before calls are made to the decompressor -# function. For ethernet downloads this can be made bigger -# (at the cost of memory), but for serial downloads on slow -# processors it may be necessary to reduce the size to -# avoid serial overruns. zlib appears to bail out if less -# than five bytes are available initially so this is the -# minimum. -# -cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 64 - # value_source default - # Default value: 64 - # Legal values: 5 to 256 -}; - -# Support compression of Flash images -# This CDL indicates whether flash images can -# be decompressed from gzip/zlib format into RAM. -# -cdl_option CYGPRI_REDBOOT_ZLIB_FLASH { - # ActiveIf constraint: CYGPKG_REDBOOT_FLASH - # CYGPKG_REDBOOT_FLASH == 1 - # --> 1 - # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Include GZIP uncompress command -# Enable this option to include a 'gunzip' command -# to uncompress GZIP compressed data. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Turn on CYGPRI_REDBOOT_ZLIB_FLASH -# Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen -# -cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE -}; - -# < -# Include support for xyzModem downloads -# doc: ref/download-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGPKG_REDBOOT_CFLAGS_ADD - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are used -# in addition to the set of global flags. -# -cdl_option CYGPKG_REDBOOT_CFLAGS_ADD { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM - # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-inline - # value_source default - # Default value: -Wno-inline -}; - -# Allow the load-command write into Flash. -# Write images direct to Flash via the load command. -# We assume anything which is invalid RAM is flash, hence -# the requires statement -# -cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH { - # ActiveIf constraint: CYGPKG_REDBOOT_FLASH - # CYGPKG_REDBOOT_FLASH == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS - # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1 - # --> 1 -}; - -# Include MS Windows CE support -# doc: ref/wince.html -# This option enables MS Windows CE EShell support -# and Windows CE .BIN images support -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 -}; - -# Include support for MXC USB downloads -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include support for i.MX USB OTG downloads -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include POSIX checksum command -# doc: ref/cksum-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory fill command -# doc: ref/mfill-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory compare command -# doc: ref/mcmp-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory copy command -# doc: ref/mcopy-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory dump command -# doc: ref/dump-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include cache command -# doc: ref/cache-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include exec command -# doc: ref/exec-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_ARM_LINUX_EXEC - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC -}; - -# Include I/O Memory commands 'iopeek' and 'iopoke' -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Granularity of timer/ticks -# This option controls the granularity of the timers. -# Faster CPUs can afford higher granularity (lower values) -# which should give higher network performance since the stack -# is purely polled. -# -cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 250 - # value_source default - # Default value: 250 - # Legal values: 10 25 50 100 250 500 1000 -}; - -# Redboot Networking -# This option includes networking support in RedBoot. -# -cdl_component CYGPKG_REDBOOT_NETWORKING { - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS - # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING -}; - -# > -# Print net debug information -# This option is overriden by the configuration stored -# in flash. -# -cdl_option CYGDBG_REDBOOT_NET_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Support TFTP for download -# This option enables the use of the TFTP protocol for -# download -# -cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Support HTTP for download -# This option enables the use of the HTTP protocol for -# download -# -cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# Default IP address -# This IP address is the default used by RedBoot if -# a BOOTP/DHCP server does not respond. The numbers -# should be separated by *commas*, and not dots. If -# an IP address is configured into the Flash -# configuration, that will be used in preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# > -# Do not try to use BOOTP -# By default Redboot tries to use BOOTP to get an IP -# address. If there's no BOOTP server on your network -# use this option to avoid to wait until the -# timeout. This option is overriden by the -# configuration stored in flash. -# -cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP { - # This option is not active - # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Default bootp server -# This IP address is the default server -# address used by RedBoot if a BOOTP/DHCP -# server does not respond. The numbers should -# be separated by *commas*, and not dots. If -# an IP address is configured into the Flash -# configuration, that will be used in -# preference. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR { - # This option is not active - # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# < -# Use DHCP to get IP information -# Use DHCP protocol to obtain pertinent IP addresses, such -# as the client, server, gateway, etc. -# -cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY - # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP -}; - -# Use a gateway for non-local IP traffic -# Enabling this option will allow the RedBoot networking -# stack to use a [single] gateway to reach a non-local -# IP address. If disabled, RedBoot will only be able to -# reach nodes on the same subnet. -# -cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP - # CYGSEM_REDBOOT_NETWORKING_DHCP == 1 - # --> 1 -}; - -# > -# Default gateway IP address -# This IP address is the default used by RedBoot -# if a BOOTP/DHCP server does not respond. The -# numbers should be separated by *commas*, and -# not dots. If an IP address is configured into -# the Flash configuration, that will be used in -# preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# Default IP address mask -# This IP address mask is the default used by -# RedBoot if a BOOTP/DHCP server does not -# respond. The numbers should be separated by -# *commas*, and not dots. If an IP address is -# configured into the Flash configuration, that -# will be used in preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# < -# TCP port to listen for incoming connections -# RedBoot will 'listen' on this port for incoming TCP -# connections. This allows outside connections to be made -# to the platform, either for GDB or RedBoot commands. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 9000 - # value_source default - # Default value: 9000 -}; - -# Number of [network] packet buffers -# RedBoot may need to buffer network data to support -# various connections. This option allows control -# over the number of such buffered packets, and in -# turn, controls the amount of memory used by RedBoot -# (which is not available to user applications). -# Each packet buffer takes up about 1514 bytes. -# Note: there is little need to make this larger than -# the default. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 - # Legal values: 3 to 8 -}; - -# DNS support -# When this option is enabled, RedBoot will be built with -# support for DNS, allowing use of hostnames on the command -# line. -# -cdl_component CYGPKG_REDBOOT_NETWORKING_DNS { - # This option is not active - # ActiveIf constraint: CYGPKG_NS_DNS - # CYGPKG_NS_DNS (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: !CYGPKG_NS_DNS_BUILD - # CYGPKG_NS_DNS_BUILD (unknown) == 0 - # --> 1 -}; - -# > -# Default DNS IP -# This option sets the IP of the default DNS. The IP can be -# changed at runtime as well. -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0.0.0.0 - # value_source default - # Default value: 0.0.0.0 -}; - -# Timeout in DNS lookup -# This option sets the timeout used when looking up an -# address via the DNS. Default is 10 seconds. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # value_source default - # Default value: 10 -}; - -# Support the use of a domain name -# This option controls if Redboot supports domain -# names when performing DNS lookups -# -cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Default DNS domain -# This option sets the default DNS domain name. -# This value will be overwritten by the value in -# flash or a domain returned by DHCP -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Get DNS domain from Flash -# This option enables getting the domain name -# from the flash configuration. This can later be -# overwritten by a value learnt from DHCP -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Use DNS domain from DHCP -# This option enables the use of the domain name -# returned by DHCP. -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# BOOTP/DHCP DNS domain buffer size -# This options sets the size of the static -# buffer used by BOOTP/DHCP to store the DNS -# domain name. The domain name will not be -# set if the buffer is too small to hold it. -# -cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 -}; - -# < -# < -# Default network device driver -# This is the name of the default network device to use. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE { - # This option is not active - # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1 - # CYGHWR_NET_DRIVERS == 1 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"\"" - # value_source default - # Default value: "\"\"" -}; - -# Initialize only one net device -# This option tells RedBoot to stop initializing network -# devices when it finds the first device which is -# successfully initialized. The default behavior causes -# all network devices to be initialized. -# -cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE { - # This option is not active - # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1 - # CYGHWR_NET_DRIVERS == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Let RedBoot use any I/O channel for its console. -# If this option is enabled then RedBoot will attempt to use all -# defined serial I/O channels for its console device. Once input -# arrives at one of these channels then the console will use only -# that port. -# -cdl_option CYGPKG_REDBOOT_ANY_CONSOLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# Let RedBoot adjust the baud rate of the serial console. -# If this option is enabled then RedBoot will support commands -# to set and query the baud rate on the selected console. -# -cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE { - # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT - # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Run a platform specific startup function. -# If this option is enabled then RedBoot will execute a platform -# specific startup function before entering into its command line -# processing. This allows the platform to perform any special -# setups before RedBoot actually starts running. Note: the entire -# RedBoot environment will already be initialized at this point. -# -cdl_option CYGSEM_REDBOOT_PLF_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Run a platform specific ESA validation function. -# If this option is enabled then RedBoot will execute a platform -# specific function to validate an ethernet ESA. This would be -# useful if the address must conform to standards set by the -# hardware manufacturer, etc. -# -cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 - # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI - # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE -}; - -# Maximum command line length -# This option allows control over how long the CLI command line -# should be. This space will be allocated statically -# rather than from RedBoot's stack. -# -cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # The inferred value should not be edited directly. - inferred_value 1024 - # value_source inferred - # Default value: 256 -}; - -# Command processing idle timeout (ms) -# This option controls the timeout period before the -# command processing is considered 'idle'. Making this -# number smaller will cause idle processing to take place -# more often, etc. The default value of 10ms is a reasonable -# tradeoff between responsiveness and overhead. -# -cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # value_source default - # Default value: 10 -}; - -# Validate RAM addresses during load -# This option controls whether or not RedBoot will make -# sure that memory being used by the "load" command is -# in fact in user RAM. Leaving the option enabled makes -# for a safer environment, but this check may not be valid -# on all platforms, thus the ability to disable it. -# ** Disable this only with great care ** -# -cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGBLD_REDBOOT_LOAD_INTO_FLASH - # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS -}; - -# Allow RedBoot to support FLASH programming -# If this option is enabled then RedBoot will provide commands -# to manage images in FLASH memory. These images can be loaded -# into memory for execution or executed in place. -# -cdl_component CYGPKG_REDBOOT_FLASH { - # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE - # CYGHWR_IO_FLASH_DEVICE == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: CYGPKG_REDBOOT_FLASH - # option CYGBLD_REDBOOT_LOAD_INTO_FLASH - # ActiveIf: CYGPKG_REDBOOT_FLASH -}; - -# > -# Byte order used to store info in flash. -# This option controls the byte ordering used to store -# the FIS directory info and flash config info. -# -cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value NATURAL - # value_source default - # Default value: NATURAL - # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST" -}; - -# RedBoot Flash Image System support -# doc: ref/flash-image-system.html -# This option enables the Flash Image System commands -# and support within RedBoot. If disabled, simple Flash -# access commands such as "fis write" will still exist. -# This option would be disabled for targets that need simple -# FLASH manipulation, but do not have the need or space for -# complete image management. -# -cdl_option CYGOPT_REDBOOT_FIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_FIS_CONTENTS - # ActiveIf: CYGOPT_REDBOOT_FIS - # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS -}; - -# Max number of chunks of free space to manage -# If this option is defined then "fis free" will -# rely on the FIS directory to determine what space is -# free within the FLASH. This option controls the -# maximum number of free segment which can be handled -# (typically this number is small). If this option is -# not enabled, the the archaic behaviour of actually -# scanning the FLASH for erased sectors (unreliable) -# will be used to determine what's free and what's -# not. -# -cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 32 - # value_source default - # Default value: 1 32 -}; - -# Flash Image System default directory contents -# -cdl_component CYGPKG_REDBOOT_FIS_CONTENTS { - # ActiveIf constraint: CYGOPT_REDBOOT_FIS - # CYGOPT_REDBOOT_FIS == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# > -# Flash block containing the Directory -# Which block of flash should hold the directory -# information. Positive numbers are absolute block -# numbers. Negative block numbers count backwards -# from the last block. eg 2 means block 2, -2 -# means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -1 - # value_source default - # Default value: -1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK -}; - -# Redundant Flash Image System Directory Support -# This option enables the use of a redundant FIS -# directory within RedBoot. If enabled a flash block -# will be reserved for a second copy of the fis -# directory. Doing this allow for power failure safe -# updates of the directory by the application. -# -cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1 - # --> 0 -}; - -# > -# Flash block containing the backup Directory -# Which block of flash should hold the redundant -# directory information. Positive numbers are -# absolute block numbers. Negative block numbers -# count backwards from the last block. eg 2 means -# block 2, -2 means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK { - # This option is not active - # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -3 - # value_source default - # Default value: -3 - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK - # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0 - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK -}; - -# < -# Pseudo-file to describe reserved area -# If an area of FLASH is reserved, it is informative to -# have a fis entry describing it. This option controls -# creation of such an entry by default in the fis init -# command. -# -cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE { - # This option is not active - # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# File to describe RedBoot boot image -# Normally a ROM-startup RedBoot image is first in the -# FLASH, and the system boots using that image. This -# option controls creation of an entry describing it in -# the fis init command. It might be disabled if a -# platform has an immutable boot image of its own, where -# we use a POST-startup RedBoot instead, which performs -# less board initialization. -# -cdl_option CYGOPT_REDBOOT_FIS_REDBOOT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_FIS_REDBOOT_POST - # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT - # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE - # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0 -}; - -# File to describe RedBoot POST-compatible image -# This option controls creation of an entry describing a -# POST-startup RedBoot image in the fis init command. -# Not all platforms support POST-startup. A platform -# might have both for testing purposes, where the -# eventual user would substitute their own POST code for -# the initial ROM-startup RedBoot, and then jump to the -# POST-compatible RedBoot immediately following. -# -cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT - # CYGOPT_REDBOOT_FIS_REDBOOT == 1 - # --> 0 -}; - -# > -# Offset of POST image from FLASH start -# This option specifies the offset for a POST image from -# the start of FLASH. If unset, then the fis entry -# describing the POST image will be placed where -# convenient. -# -cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET { - # This option is not active - # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET -}; - -# < -# File to describe RedBoot backup image -# This option controls creation of an entry describing a -# backup RedBoot image in the fis init command. -# Conventionally a RAM-startup RedBoot image is kept -# under this name for use in updating the ROM-based -# RedBoot that boots the board. -# -cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include ARM SIB ID in FIS -# If set, this option will cause the last 5 words of -# the FIS to include the special ID needed for the -# flash to be recognized as a reserved area for RedBoot -# by an ARM BootRom monitor. -# -cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Size of FIS directory entry -# The FIS directory is limited to one single flash -# sector. If your flash has tiny sectors, you may wish -# to reduce this value in order to get more slots in -# the FIS directory. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # value_source default - # Default value: 256 -}; - -# Number of FIS directory entries -# The FIS directory normally occupies a single flash -# sector. Adjusting this value can allow for more than -# one flash sector to be used, which is useful if your -# sectors are very small. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 8 - # value_source default - # Default value: 8 -}; - -# Maximum RedBoot image size -# This option controls the maximum length reserved -# for the RedBoot boot image in the FIS table. -# This should be a multiple of the flash's erase -# block size. -# -cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00020000 - # The inferred value should not be edited directly. - inferred_value 0x00040000 - # value_source inferred - # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0 - # CYGOPT_REDBOOT_FIS_REDBOOT == 1 - # --> 0x00020000 -}; - -# Offset from start of FLASH to RedBoot boot image -# This option controls where the RedBoot boot image is -# located relative to the start of FLASH. -# -cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # --> 0 - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # component CYGPKG_HAL_ARM_TX53_OPTIONS - # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 -}; - -# Size of reserved area at start of FLASH -# This option reserves an area at the start of -# FLASH where RedBoot will never interfere; it is -# expected that this area contains -# (non-RedBoot-based) POST code or some other boot -# monitor that executes before RedBoot. -# -cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGOPT_REDBOOT_FIS_RESERVED_BASE - # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET -}; - -# < -# Keep all RedBoot FLASH data blocks locked. -# When this option is enabled, RedBoot will keep configuration -# data and the FIS directory blocks implicitly locked. While -# this is somewhat safer, it does add overhead during updates. -# -cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL { - # This option is not active - # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 - # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use CRC checksums on FIS images. -# When this option is enabled, RedBoot will use CRC checksums -# when reading and writing flash images. -# -cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# ARM FLASH drivers support SIB flash block structure -# This interface is implemented by a flash driver -# to indicate that it supports the ARM SIB flash -# block structure -# -cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED { - # No options implement this inferface - # ActiveIf constraint: CYGPKG_HAL_ARM - # CYGPKG_HAL_ARM == current - # --> 1 - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_REDBOOT_ARM_FLASH_SIB - # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED -}; - -# Use ARM SIB flash block structure -# This option is used to interpret ARM Flash System -# information blocks. -# -cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB { - # This option is not active - # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED - # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Keep RedBoot configuration data in FLASH -# When this option is enabled, RedBoot will keep configuration -# data in a separate block of FLASH memory. This data will -# include such items as the node IP address or startup scripts. -# -cdl_component CYGSEM_REDBOOT_FLASH_CONFIG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGPKG_IO_FLASH != 0 - # CYGPKG_IO_FLASH == current - # --> 1 - - # The following properties are affected by this value - # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0" - # option CYGPKG_REDBOOT_NETWORKING_DNS_IP - # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG - # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN - # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG - # option CYGFUN_REDBOOT_BOOT_SCRIPT - # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG -}; - -# > -# Length of configuration data in FLASH -# This option is used to control the amount of memory and FLASH -# to be used for configuration options (persistent storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4096 - # value_source default - # Default value: 4096 -}; - -# Style of media used for persistent data storage -# Persistent data storage can either be held in 'norma' FLASH -# or some other device (represented by the 'EEPROM' choice). -# The different styles utilize different access methods. -# -cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value FLASH - # value_source default - # Default value: FLASH - # Legal values: "FLASH" "EEPROM" - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK - # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") -}; - -# Merged config data and FIS directory -# If this option is set, then the FIS directory and FLASH -# configuration database will be stored in the same physical -# FLASH block. -# -cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG { - # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # CYGOPT_REDBOOT_FIS == 1 - # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_REDUNDANT_FIS - # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG -}; - -# Which block of flash to use -# Which block of flash should hold the configuration -# information. Positive numbers are absolute block numbers. -# Negative block numbers count backwards from the last block. -# eg 2 means block 2, -2 means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -2 - # value_source default - # Default value: -2 -}; - -# Support simple macros/aliases in FLASH -# This option is used to allow support for simple text-based -# macros (aliases). These aliases are kept in the FLASH -# configuration data (persistent storage). -# -cdl_option CYGSEM_REDBOOT_FLASH_ALIASES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Length of strings in FLASH configuration data -# This option is used to control the amount of memory -# and FLASH to be used for string configuration -# options (persistent storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 128 - # value_source default - # Default value: 128 -}; - -# Length of configuration script(s) in FLASH -# This option is used to control the amount of memory and -# FLASH to be used for configuration options (persistent -# storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 512 - # The inferred value should not be edited directly. - inferred_value 2048 - # value_source inferred - # Default value: 512 -}; - -# Fallback to read-only FLASH configuration -# This option will cause the configuration information to -# revert to the readonly information stored in the FLASH. -# The option only takes effect after -# 1) the config_ok flag has been set to be true, -# indicating that at one time the copy in RAM was valid; -# and -# 2) the information in RAM has been verified to be invalid -# -cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH - # --> 1 -}; - -# < -# Allow RedBoot to support fileio -# If this option is enabled then RedBoot will provide commands -# to load files from fileio file systems such as JFFS2. -# -cdl_component CYGPKG_REDBOOT_FILEIO { - # This option is not active - # ActiveIf constraint: CYGPKG_IO_FILEIO - # CYGPKG_IO_FILEIO (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_GETC_BUFFER - # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256 -}; - -# > -# Include an ls command -# If this option is enabled a simple ls command will be -# included in redboot so the contents of a directory -# can be listed -# -cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS { - # This option is not active - # The parent CYGPKG_REDBOOT_FILEIO is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Allow RedBoot to support disks -# If this option is enabled then RedBoot will provide commands -# to load disk files. -# -cdl_component CYGPKG_REDBOOT_DISK { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# > -# Include Redboot commands for disk access -# -cdl_option CYGSEM_REDBOOT_DISK { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0 - # CYGINT_REDBOOT_DISK_DRIVERS == 0 - # --> 0 -}; - -# Hardware drivers for disk-type devices -# -cdl_interface CYGINT_REDBOOT_DISK_DRIVERS { - # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_DISK - # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0 -}; - -# Maximum number of supported disks -# This option controls the number of disks supported by -# RedBoot. -# -cdl_option CYGNUM_REDBOOT_MAX_DISKS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 -}; - -# Maximum number of partitions per disk -# This option controls the maximum number of supported -# partitions per disk. -# -cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 8 - # value_source default - # Default value: 8 -}; - -# Support IDE disks. -# When this option is enabled, RedBoot will support IDE disks. -# -cdl_component CYGSEM_REDBOOT_DISK_IDE { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0 - # CYGINT_HAL_PLF_IF_IDE == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Work with VMware virtual disks -# This option controls the disk driver behavior at -# ide-init -# -cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE { - # This option is not active - # The parent CYGSEM_REDBOOT_DISK_IDE is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Support Linux second extended filesystems. -# When this option is enabled, RedBoot will support EXT2 -# filesystems. -# -cdl_component CYGSEM_REDBOOT_DISK_EXT2FS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Support ISO9660 filesystems. -# When this option is enabled, RedBoot will support ISO9660 -# filesystems. -# -cdl_component CYGSEM_REDBOOT_DISK_ISO9660 { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Calculated value: 0 - # Flavor: bool - # Current value: 0 -}; - -# < -# Boot scripting -# doc: ref/persistent-state-flash.html -# This contains options related to RedBoot's boot script -# functionality. -# -cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT { - # There is no associated value. -}; - -# > -# Boot scripting enabled -# This option controls whether RedBoot boot script -# functionality is enabled. -# -cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT { - # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG - # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0 - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Use default RedBoot boot script -# If enabled, this option will tell RedBoot to use the -# value of this option as a default boot script. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 0 0 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGFUN_REDBOOT_BOOT_SCRIPT - # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG -}; - -# Resolution (in ms) for script timeout value. -# This option controls the resolution of the script -# timeout. The value is specified in milliseconds -# (ms), thus to have the script timeout be defined in -# terms of tenths of seconds, use 100. -# -cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1000 - # The inferred value should not be edited directly. - inferred_value 10 - # value_source inferred - # Default value: 1000 -}; - -# Script default timeout value -# This option is used to set the default timeout for startup -# scripts, when they are enabled. -# -cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 10 -}; - -# < -# Support RTC for time & date functions -# When this option is enabled, RedBoot will support commands to -# query and set the real time clock (time and date) -# -cdl_option CYGSEM_REDBOOT_RTC { - # This option is not active - # ActiveIf constraint: CYGPKG_IO_WALLCLOCK - # CYGPKG_IO_WALLCLOCK (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Behave like a ROM monitor -# Enabling this option will allow RedBoot to provide ROM -# monitor-style services to programs which it executes. -# -cdl_option CYGPRI_REDBOOT_ROM_MONITOR { - # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # CYG_HAL_STARTUP == ROMRAM - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - # Requires: CYGSEM_HAL_ROM_MONITOR - # CYGSEM_HAL_ROM_MONITOR == 1 - # --> 1 -}; - -# Allow RedBoot to handle GNUPro application 'syscalls'. -# If this option is enabled then RedBoot will install a -# syscall handler to support debugging of applications -# based on GNUPro newlib/bsp. -# -cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS - # option CYGPKG_HAL_GDB_FILEIO - # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS -}; - -# > -# Support additional syscalls for 'gprof' profiling -# Support additional syscalls to support a periodic callback -# function for histogram-style profiling, and an enquire/set -# of the tick rate. -# The application must use the GNUPro newlib facilities -# to set this up. -# -cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF { - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT - # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Does the HAL support 'gprof' profiling? -# -cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT { - # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF - # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT -}; - -# Do not raise SIGTRAP when program exits -# For some (single shot) newlib based programs, -# exiting and returning a termination status may be -# the normal expected behavior. -# -cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP { - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Use a common buffer for Zlib and FIS -# Use a common memory buffer for both the zlib workspace -# and FIS directory operations. This can save a substantial -# amount of RAM, especially when flash sectors are large. -# -cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS - # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1 - # CYGOPT_REDBOOT_FIS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Size of Zlib/FIS common buffer -# Size of common buffer to allocate. Must be at least the -# size of one flash sector. -# -cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE { - # This option is not active - # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x0000C000 - # value_source default - # Default value: 0x0000C000 - # Legal values: 0x4000 to 0x80000000 -}; - -# < -# Buffer size in getc when loading images -# When loading images a buffer is used between redboot and the -# underlying storage medium, eg a filesystem, or a socket etc. -# The size of this buffer can have a big impart on load speed. -# -cdl_option CYGNUM_REDBOOT_GETC_BUFFER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # value_source default - # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256 - # CYGPKG_REDBOOT_FILEIO == 0 - # --> 256 -}; - -# < -# Redboot for ARM options -# This option lists the target's requirements for a valid Redboot -# configuration. -# -cdl_component CYGPKG_REDBOOT_ARM_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Provide the exec command in RedBoot -# This option contains requirements for booting linux -# from RedBoot. The component is enabled/disabled from -# RedBoots CDL. -# -cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC - # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1 - # --> 1 - - # There is no associated value. -}; - -# > -# Enable -x switch for exec command. -# This option allows bi-endian platforms to launch kernels -# built for an endianess different than the RedBoot endianess -# -cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Physical base address of linux kernel -# This is the physical address of the base of the -# Linux kernel image. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x70108000 - # value_source default - # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT - # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 - # --> 0x70108000 -}; - -# Default physical base address of linux kernel -# This is the physical address of the base of the -# Linux kernel image. This option gets set by the -# platform CDL. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00008000 - # The inferred value should not be edited directly. - inferred_value 0x70108000 - # value_source inferred - # Default value: 0x00008000 - - # The following properties are affected by this value - # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS - # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT - # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS - # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 -}; - -# Base address of linux kernel parameter tags -# This is the base address of the area of memory used to -# pass parameters to the Linux kernel. This should be chosen -# to avoid overlap with the kernel and any ramdisk image. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00000100 - # value_source default - # Default value: 0x00000100 -}; - -# < -# < -# Redboot HAL options -# This option lists the target's requirements for a valid Redboot -# configuration. -# -cdl_component CYGPKG_REDBOOT_HAL_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. -}; - -# > -# Build Redboot ROM binary image -# This option enables the conversion of the Redboot ELF -# image to a binary image suitable for ROM programming. -# -cdl_option CYGBLD_BUILD_REDBOOT_BIN { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT - # CYGBLD_BUILD_REDBOOT == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Redboot HAL variant options -# -cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. - # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 - # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 - # --> 1 -}; - -# < -# ISO C and POSIX infrastructure -# eCos supports implementations of ISO C libraries and POSIX -# implementations. This package provides infrastructure used by -# all such implementations. -# -cdl_package CYGPKG_ISOINFRA { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_STRING - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_COMPRESS_ZLIB - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_IO_FLASH - # Requires: CYGPKG_ISOINFRA - # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY - # Requires: CYGPKG_ISOINFRA - # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY - # DefaultValue: 0 != CYGPKG_ISOINFRA - # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS - # ActiveIf: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_I18N - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_STDLIB - # Requires: CYGPKG_ISOINFRA -}; - -# > -# Startup and termination -# -cdl_component CYGPKG_ISO_STARTUP { - # There is no associated value. -}; - -# > -# main() startup implementations -# Implementations of this interface arrange for a user-supplied -# main() to be called in an ISO compatible environment. -# -cdl_interface CYGINT_ISO_MAIN_STARTUP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP - # CYGINT_ISO_MAIN_STARTUP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MAIN_STARTUP - # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP -}; - -# environ implementations -# Implementations of this interface provide the environ -# variable required by POSIX. -# -cdl_interface CYGINT_ISO_ENVIRON { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_ENVIRON - # CYGINT_ISO_ENVIRON == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ENVIRON - # Requires: 1 >= CYGINT_ISO_ENVIRON -}; - -# < -# ctype.h functions -# -cdl_component CYGPKG_ISO_CTYPE_H { - # There is no associated value. -}; - -# > -# Number of implementations of ctype functions -# -cdl_interface CYGINT_ISO_CTYPE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_CTYPE - # Requires: 1 >= CYGINT_ISO_CTYPE - # package CYGPKG_HAL_ARM_TX53KARO - # Requires: CYGINT_ISO_CTYPE - # option CYGFUN_LIBC_STRING_BSD_FUNCS - # Requires: CYGINT_ISO_CTYPE - # package CYGPKG_LIBC_STDLIB - # Requires: CYGINT_ISO_CTYPE -}; - -# Ctype implementation header -# -cdl_option CYGBLD_ISO_CTYPE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # option CYGIMP_LIBC_I18N_CTYPE_INLINES - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" -}; - -# < -# Error handling -# -cdl_component CYGPKG_ISO_ERRNO { - # There is no associated value. -}; - -# > -# Number of implementations of error codes -# -cdl_interface CYGINT_ISO_ERRNO_CODES { - # Implemented by CYGPKG_ERROR, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_ERRNO_CODES - # CYGINT_ISO_ERRNO_CODES == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ERRNO_CODES - # Requires: 1 >= CYGINT_ISO_ERRNO_CODES -}; - -# Error codes implementation header -# -cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_ERROR - # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "" -}; - -# Number of implementations of errno variable -# -cdl_interface CYGINT_ISO_ERRNO { - # Implemented by CYGPKG_ERROR_ERRNO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_ERRNO - # CYGINT_ISO_ERRNO == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ERRNO - # Requires: 1 >= CYGINT_ISO_ERRNO -}; - -# errno variable implementation header -# -cdl_option CYGBLD_ISO_ERRNO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # component CYGPKG_ERROR_ERRNO - # Requires: CYGBLD_ISO_ERRNO_HEADER == "" -}; - -# < -# Locale-related functions -# -cdl_component CYGPKG_ISO_LOCALE { - # There is no associated value. -}; - -# > -# Number of implementations of locale functions -# -cdl_interface CYGINT_ISO_LOCALE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_LOCALE - # CYGINT_ISO_LOCALE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_LOCALE - # Requires: 1 >= CYGINT_ISO_LOCALE -}; - -# Locale implementation header -# -cdl_option CYGBLD_ISO_LOCALE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Standard I/O-related functionality -# -cdl_component CYGPKG_ISO_STDIO { - # There is no associated value. -}; - -# > -# Number of implementations of stdio file types -# -cdl_interface CYGINT_ISO_STDIO_FILETYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES - # CYGINT_ISO_STDIO_FILETYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILETYPES - # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES -}; - -# Stdio file types implementation header -# -cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Stdio standard streams implementations -# -cdl_interface CYGINT_ISO_STDIO_STREAMS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS - # CYGINT_ISO_STDIO_STREAMS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_STREAMS - # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS -}; - -# Stdio standard streams implementation header -# This header file must define stdin, stdout -# and stderr. -# -cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file operations -# -cdl_interface CYGINT_ISO_STDIO_FILEOPS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS - # CYGINT_ISO_STDIO_FILEOPS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEOPS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS -}; - -# Stdio file operations implementation header -# This header controls the file system operations on a file -# such as remove(), rename(), tmpfile(), tmpnam() and associated -# constants. -# -cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file access functionals -# -cdl_interface CYGINT_ISO_STDIO_FILEACCESS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS - # CYGINT_ISO_STDIO_FILEACCESS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEACCESS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FILEACCESS -}; - -# Stdio file access implementation header -# This header controls the file access operations -# such as fclose(), fflush(), fopen(), freopen(), setbuf(), -# setvbuf(), and associated constants. -# -cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio formatted I/O -# -cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO - # CYGINT_ISO_STDIO_FORMATTED_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FORMATTED_IO - # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FORMATTED_IO -}; - -# Stdio formatted I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio character I/O -# -cdl_interface CYGINT_ISO_STDIO_CHAR_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO - # CYGINT_ISO_STDIO_CHAR_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_CHAR_IO - # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO -}; - -# Stdio character I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio direct I/O -# -cdl_interface CYGINT_ISO_STDIO_DIRECT_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO - # CYGINT_ISO_STDIO_DIRECT_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_DIRECT_IO - # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO -}; - -# Stdio direct I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file positioning -# -cdl_interface CYGINT_ISO_STDIO_FILEPOS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS - # CYGINT_ISO_STDIO_FILEPOS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEPOS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FILEPOS -}; - -# Stdio file positioning implementation header -# -cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio error handling -# -cdl_interface CYGINT_ISO_STDIO_ERROR { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_ERROR - # CYGINT_ISO_STDIO_ERROR == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_ERROR - # Requires: 1 >= CYGINT_ISO_STDIO_ERROR -}; - -# Stdio error handling implementation header -# -cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX fd-related function implementations -# -cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS - # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS - # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS -}; - -# POSIX fd-related function implementation header -# -cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Standard general utility functions -# -cdl_component CYGPKG_ISO_STDLIB { - # There is no associated value. -}; - -# > -# String conversion function implementations -# -cdl_interface CYGINT_ISO_STDLIB_STRCONV { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV - # CYGINT_ISO_STDLIB_STRCONV == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_STRCONV - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV -}; - -# String conversion function implementation header -# -cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_ATOX - # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "" -}; - -# String to FP conversion function implementations -# -cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT { - # Implemented by CYGFUN_LIBC_strtod, active, disabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT - # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT -}; - -# String to FP conversion function implementation header -# -cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Random number generator implementations -# -cdl_interface CYGINT_ISO_RAND { - # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled - # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled - # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_RAND - # CYGINT_ISO_RAND == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_RAND - # Requires: 1 >= CYGINT_ISO_RAND -}; - -# Random number generator implementation header -# -cdl_option CYGBLD_ISO_RAND_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Malloc implementations -# -cdl_interface CYGINT_ISO_MALLOC { - # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_MALLOC - # CYGINT_ISO_MALLOC == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MALLOC - # Requires: 1 >= CYGINT_ISO_MALLOC - # option CYGFUN_LIBC_STRING_STRDUP - # ActiveIf: CYGINT_ISO_MALLOC -}; - -# Malloc implementation header -# -cdl_option CYGBLD_ISO_MALLOC_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Mallinfo() implementations -# -cdl_interface CYGINT_ISO_MALLINFO { - # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_MALLINFO - # CYGINT_ISO_MALLINFO == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MALLINFO - # Requires: 1 >= CYGINT_ISO_MALLINFO -}; - -# Mallinfo() implementation header -# -cdl_option CYGBLD_ISO_MALLINFO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Program exit functionality implementations -# -cdl_interface CYGINT_ISO_EXIT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_EXIT - # CYGINT_ISO_EXIT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_EXIT - # Requires: 1 >= CYGINT_ISO_EXIT - # option CYGFUN_INFRA_DUMMY_ABORT - # Requires: !CYGINT_ISO_EXIT - # option CYGFUN_INFRA_DUMMY_ABORT - # DefaultValue: CYGINT_ISO_EXIT == 0 -}; - -# Program exit functionality implementation header -# -cdl_option CYGBLD_ISO_EXIT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Program environment implementations -# -cdl_interface CYGINT_ISO_STDLIB_ENVIRON { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON - # CYGINT_ISO_STDLIB_ENVIRON == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_ENVIRON - # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON -}; - -# Program environment implementation header -# -cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# system() implementations -# -cdl_interface CYGINT_ISO_STDLIB_SYSTEM { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM - # CYGINT_ISO_STDLIB_SYSTEM == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_SYSTEM - # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM -}; - -# system() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# bsearch() implementations -# -cdl_interface CYGINT_ISO_BSEARCH { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_BSEARCH - # CYGINT_ISO_BSEARCH == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_BSEARCH - # Requires: 1 >= CYGINT_ISO_BSEARCH -}; - -# bsearch() implementation header -# -cdl_option CYGBLD_ISO_BSEARCH_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# qsort() implementations -# -cdl_interface CYGINT_ISO_QSORT { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT - # CYGINT_ISO_STDLIB_QSORT (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# qsort() implementation header -# -cdl_option CYGBLD_ISO_QSORT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# abs()/labs() implementations -# -cdl_interface CYGINT_ISO_ABS { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_ABS - # CYGINT_ISO_STDLIB_ABS (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# abs()/labs() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_ABS - # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "" -}; - -# div()/ldiv() implementations -# -cdl_interface CYGINT_ISO_DIV { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_DIV - # CYGINT_ISO_STDLIB_DIV (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# div()/ldiv() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_DIV - # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "" -}; - -# Header defining the implementation's MB_CUR_MAX -# -cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - - # The following properties are affected by this value - # interface CYGINT_LIBC_I18N_MB_REQUIRED - # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "" -}; - -# Multibyte character implementations -# -cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE - # CYGINT_ISO_STDLIB_MULTIBYTE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_MULTIBYTE - # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE -}; - -# Multibyte character implementation header -# -cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# String functions -# -cdl_component CYGPKG_ISO_STRING { - # There is no associated value. -}; - -# > -# Number of implementations of strerror() function -# -cdl_interface CYGINT_ISO_STRERROR { - # Implemented by CYGPKG_ERROR_STRERROR, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRERROR - # CYGINT_ISO_STRERROR == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRERROR - # Requires: 1 >= CYGINT_ISO_STRERROR -}; - -# strerror() implementation header -# -cdl_option CYGBLD_ISO_STRERROR_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGPKG_ERROR_STRERROR - # Requires: CYGBLD_ISO_STRERROR_HEADER == "" -}; - -# memcpy() implementation header -# -cdl_option CYGBLD_ISO_MEMCPY_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# memset() implementation header -# -cdl_option CYGBLD_ISO_MEMSET_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of strtok_r() function -# -cdl_interface CYGINT_ISO_STRTOK_R { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRTOK_R - # CYGINT_ISO_STRTOK_R == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRTOK_R - # Requires: 1 >= CYGINT_ISO_STRTOK_R -}; - -# strtok_r() implementation header -# -cdl_option CYGBLD_ISO_STRTOK_R_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "" -}; - -# Number of implementations of locale-specific string functions -# This covers locale-dependent string functions such as strcoll() -# and strxfrm(). -# -cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS - # CYGINT_ISO_STRING_LOCALE_FUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_LOCALE_FUNCS - # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS -}; - -# Locale-specific string functions' implementation header -# This covers locale-dependent string functions such as strcoll() -# and strxfrm(). -# -cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "" -}; - -# Number of implementations of BSD string functions -# -cdl_interface CYGINT_ISO_STRING_BSD_FUNCS { - # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS - # CYGINT_ISO_STRING_BSD_FUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_BSD_FUNCS - # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS -}; - -# BSD string functions' implementation header -# -cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGFUN_LIBC_STRING_BSD_FUNCS - # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "" -}; - -# Number of implementations of other mem*() functions -# -cdl_interface CYGINT_ISO_STRING_MEMFUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_MEMFUNCS - # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE - # Requires: CYGINT_ISO_STRING_MEMFUNCS -}; - -# Other mem*() functions' implementation header -# -cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "" -}; - -# Number of implementations of other ISO C str*() functions -# This covers the other str*() functions defined by ISO C. -# -cdl_interface CYGINT_ISO_STRING_STRFUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_STRFUNCS - # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_INFRA_DUMMY_STRLEN - # Requires: !CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_INFRA_DUMMY_STRLEN - # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0 - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_ISO_STRING_STRFUNCS - # component CYGPKG_IO_ETH_DRIVERS_NET - # Requires: CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STRING_STRFUNCS - # package CYGPKG_IO_FLASH - # Requires: CYGINT_ISO_STRING_STRFUNCS - # package CYGPKG_LIBC_STDLIB - # Requires: CYGINT_ISO_STRING_STRFUNCS -}; - -# Other ISO C str*() functions' implementation header -# This covers the other str*() functions defined by ISO C. -# -cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "" -}; - -# < -# Clock and time functionality -# -cdl_component CYGPKG_ISO_TIME { - # There is no associated value. -}; - -# > -# time_t implementation header -# -cdl_option CYGBLD_ISO_TIME_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# clock_t implementation header -# -cdl_option CYGBLD_ISO_CLOCK_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# struct timeval implementation header -# -cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# fnmatch implementation header -# -cdl_option CYGBLD_ISO_FNMATCH_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX timer types -# -cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES - # CYGINT_ISO_POSIX_TIMER_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMER_TYPES - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES -}; - -# POSIX timer types implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX clock types -# -cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES - # CYGINT_ISO_POSIX_CLOCK_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_CLOCK_TYPES - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES -}; - -# POSIX clock types implementation header -# -cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of ISO C types -# -cdl_interface CYGINT_ISO_C_TIME_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES - # CYGINT_ISO_C_TIME_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_C_TIME_TYPES - # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES -}; - -# ISO C time types implementation header -# -cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX timers -# -cdl_interface CYGINT_ISO_POSIX_TIMERS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS - # CYGINT_ISO_POSIX_TIMERS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMERS - # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS -}; - -# POSIX timer implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX clocks -# -cdl_interface CYGINT_ISO_POSIX_CLOCKS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS - # CYGINT_ISO_POSIX_CLOCKS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_CLOCKS - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS -}; - -# POSIX clocks implementation header -# -cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of ISO C clock functions -# -cdl_interface CYGINT_ISO_C_CLOCK_FUNCS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS - # CYGINT_ISO_C_CLOCK_FUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_C_CLOCK_FUNCS - # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS -}; - -# ISO C clock functions' implementation header -# -cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of tzset() function -# -cdl_interface CYGINT_ISO_TZSET { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_TZSET - # CYGINT_ISO_TZSET == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_TZSET - # Requires: 1 >= CYGINT_ISO_TZSET -}; - -# tzset() implementation header -# -cdl_option CYGBLD_ISO_TZSET_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Signal functionality -# -cdl_component CYGPKG_ISO_SIGNAL { - # There is no associated value. -}; - -# > -# Number of implementations of signal numbers -# -cdl_interface CYGINT_ISO_SIGNAL_NUMBERS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS - # CYGINT_ISO_SIGNAL_NUMBERS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGNAL_NUMBERS - # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS -}; - -# Signal numbering implementation header -# This header provides the mapping of signal -# names (e.g. SIGBUS) to numbers. -# -cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of signal implementations -# -cdl_interface CYGINT_ISO_SIGNAL_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL - # CYGINT_ISO_SIGNAL_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGNAL_IMPL - # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL -}; - -# Signals implementation header -# -cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX real time signals feature test macro -# This defines the POSIX feature test macro -# that indicates that the POSIX real time signals -# are present. -# -cdl_interface CYGINT_POSIX_REALTIME_SIGNALS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS - # CYGINT_POSIX_REALTIME_SIGNALS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_POSIX_REALTIME_SIGNALS - # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS -}; - -# < -# Non-local jumps functionality -# -cdl_component CYGPKG_ISO_SETJMP { - # There is no associated value. -}; - -# > -# setjmp() / longjmp() implementations -# -cdl_interface CYGINT_ISO_SETJMP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SETJMP - # CYGINT_ISO_SETJMP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SETJMP - # Requires: 1 >= CYGINT_ISO_SETJMP -}; - -# setjmp() / longjmp() implementation header -# -cdl_option CYGBLD_ISO_SETJMP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# sigsetjmp() / siglongjmp() implementations -# -cdl_interface CYGINT_ISO_SIGSETJMP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGSETJMP - # CYGINT_ISO_SIGSETJMP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGSETJMP - # Requires: 1 >= CYGINT_ISO_SIGSETJMP -}; - -# sigsetjmp() / siglongjmp() implementation header -# -cdl_option CYGBLD_ISO_SIGSETJMP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Assertions implementation header -# -cdl_option CYGBLD_ISO_ASSERT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX file control -# This covers the POSIX file control definitions, -# normally found in -# -cdl_component CYGPKG_ISO_POSIX_FCNTL { - # There is no associated value. -}; - -# > -# POSIX open flags implementation header -# -cdl_option CYGBLD_ISO_OFLAG_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX fcntl() implementations -# -cdl_interface CYGINT_ISO_FCNTL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_FCNTL - # CYGINT_ISO_FCNTL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_FCNTL - # Requires: 1 >= CYGINT_ISO_FCNTL -}; - -# POSIX fcntl() implementation header -# -cdl_option CYGBLD_ISO_FCNTL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX file open implementations -# -cdl_interface CYGINT_ISO_OPEN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_OPEN - # CYGINT_ISO_OPEN == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_OPEN - # Requires: 1 >= CYGINT_ISO_OPEN -}; - -# POSIX file open implementation header -# -cdl_option CYGBLD_ISO_OPEN_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# definitions implementation header -# -cdl_option CYGBLD_ISO_STAT_DEFS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX directory reading implementation -# -cdl_interface CYGINT_ISO_DIRENT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_DIRENT - # CYGINT_ISO_DIRENT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DIRENT - # Requires: 1 >= CYGINT_ISO_DIRENT -}; - -# definitions implementation header -# -cdl_option CYGBLD_ISO_DIRENT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX contents -# This covers the types required by POSIX to be in -# -# -cdl_component CYGPKG_ISO_POSIX_TYPES { - # There is no associated value. -}; - -# > -# POSIX thread types implementations -# -cdl_interface CYGINT_ISO_PTHREADTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # CYGINT_ISO_PTHREADTYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREADTYPES - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # interface CYGINT_ISO_PMUTEXTYPES - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES -}; - -# POSIX thread types implementation header -# -cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX mutex types implementations -# -cdl_interface CYGINT_ISO_PMUTEXTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # CYGINT_ISO_PTHREADTYPES == 0 - # --> 1 -}; - -# POSIX mutex types implementation header -# -cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# ssize_t implementation header -# -cdl_option CYGBLD_ISO_SSIZE_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Filesystem types implementation header -# -cdl_option CYGBLD_ISO_FSTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# gid_t, pid_t, uid_t implementation header -# -cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Non-POSIX contents -# This covers the extra types required by non-POSIX -# packages to be in . These would normally -# only be visible if _POSIX_SOURCE is not defined. -# -cdl_component CYGPKG_ISO_EXTRA_TYPES { - # There is no associated value. -}; - -# > -# BSD compatible types -# -cdl_interface CYGINT_ISO_BSDTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_BSDTYPES - # CYGINT_ISO_BSDTYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_BSDTYPES - # Requires: 1 >= CYGINT_ISO_BSDTYPES -}; - -# BSD types header -# -cdl_option CYGBLD_ISO_BSDTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Utsname structure -# -cdl_component CYGPKG_ISO_UTSNAME { - # There is no associated value. -}; - -# > -# Utsname header -# -cdl_option CYGBLD_ISO_UTSNAME_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX scheduler -# -cdl_component CYGPKG_ISO_SCHED { - # There is no associated value. -}; - -# > -# POSIX scheduler implementations -# -cdl_interface CYGINT_ISO_SCHED_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SCHED_IMPL - # CYGINT_ISO_SCHED_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SCHED_IMPL - # Requires: 1 >= CYGINT_ISO_SCHED_IMPL -}; - -# POSIX scheduler implementation header -# -cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX semaphores -# -cdl_component CYGPKG_ISO_SEMAPHORES { - # There is no associated value. -}; - -# > -# POSIX semaphore implementations -# -cdl_interface CYGINT_ISO_SEMAPHORES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SEMAPHORES - # CYGINT_ISO_SEMAPHORES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SEMAPHORES - # Requires: 1 >= CYGINT_ISO_SEMAPHORES -}; - -# POSIX semaphore implementation header -# -cdl_option CYGBLD_ISO_SEMAPHORES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX message queues -# -cdl_component CYGPKG_ISO_MQUEUE { - # There is no associated value. -}; - -# > -# Implementations -# -cdl_interface CYGINT_ISO_MQUEUE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MQUEUE - # Requires: 1 >= CYGINT_ISO_MQUEUE - # option CYGNUM_ISO_MQUEUE_OPEN_MAX - # ActiveIf: CYGINT_ISO_MQUEUE - # option CYGNUM_ISO_MQUEUE_PRIO_MAX - # ActiveIf: CYGINT_ISO_MQUEUE -}; - -# Implementation header -# -cdl_option CYGBLD_ISO_MQUEUE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Maximum number of open message queues -# -cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX { - # This option is not active - # ActiveIf constraint: CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 0 - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0 - # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0 - # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0 - # --> 0 0 -}; - -# Maximum number of message priorities -# -cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX { - # This option is not active - # ActiveIf constraint: CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 0 - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 65535 - # value_source default - # Default value: 1 65535 -}; - -# < -# POSIX threads -# -cdl_component CYGPKG_ISO_PTHREAD { - # There is no associated value. -}; - -# > -# POSIX pthread implementations -# -cdl_interface CYGINT_ISO_PTHREAD_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL - # CYGINT_ISO_PTHREAD_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREAD_IMPL - # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL -}; - -# POSIX pthread implementation header -# -cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX mutex/cond var implementations -# -cdl_interface CYGINT_ISO_PTHREAD_MUTEX { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX - # CYGINT_ISO_PTHREAD_MUTEX == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREAD_MUTEX - # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX -}; - -# POSIX mutex/cond var implementation header -# -cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Limits -# -cdl_component CYGPKG_ISO_LIMITS { - # There is no associated value. -}; - -# > -# POSIX pthread limits implementations -# -cdl_interface CYGINT_ISO_POSIX_LIMITS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS - # CYGINT_ISO_POSIX_LIMITS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_LIMITS - # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS -}; - -# POSIX pthread limits implementation header -# -cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# OPEN_MAX implementation header -# -cdl_option CYGBLD_ISO_OPEN_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# LINK_MAX implementation header -# -cdl_option CYGBLD_ISO_LINK_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# NAME_MAX implementation header -# -cdl_option CYGBLD_ISO_NAME_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# PATH_MAX implementation header -# -cdl_option CYGBLD_ISO_PATH_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX termios -# -cdl_component CYGPKG_ISO_TERMIOS { - # There is no associated value. -}; - -# > -# POSIX termios implementations -# -cdl_interface CYGINT_ISO_TERMIOS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_TERMIOS - # CYGINT_ISO_TERMIOS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_TERMIOS - # Requires: 1 >= CYGINT_ISO_TERMIOS -}; - -# POSIX termios implementation header -# -cdl_option CYGBLD_ISO_TERMIOS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Dynamic load API -# -cdl_component CYGPKG_ISO_DLFCN { - # There is no associated value. -}; - -# > -# Dynamic load implementations -# -cdl_interface CYGINT_ISO_DLFCN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_DLFCN - # CYGINT_ISO_DLFCN == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DLFCN - # Requires: 1 >= CYGINT_ISO_DLFCN -}; - -# Dynamic load implementation header -# -cdl_option CYGBLD_ISO_DLFCN_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# UNIX standard functions -# -cdl_component CYGPKG_ISO_UNISTD { - # There is no associated value. -}; - -# > -# POSIX timer operations implementations -# -cdl_interface CYGINT_ISO_POSIX_TIMER_OPS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS - # CYGINT_ISO_POSIX_TIMER_OPS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMER_OPS - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS -}; - -# POSIX timer operations implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX sleep() implementations -# -cdl_interface CYGINT_ISO_POSIX_SLEEP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP - # CYGINT_ISO_POSIX_SLEEP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_SLEEP - # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP -}; - -# POSIX sleep() implementation header -# -cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# select()/poll() functions -# -cdl_component CYGPKG_ISO_SELECT { - # There is no associated value. -}; - -# > -# select() implementations -# -cdl_interface CYGINT_ISO_SELECT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_SELECT - # CYGINT_ISO_SELECT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SELECT - # Requires: 1 >= CYGINT_ISO_SELECT -}; - -# select() implementation header -# -cdl_option CYGBLD_ISO_SELECT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# poll() implementations -# -cdl_interface CYGINT_ISO_POLL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POLL - # CYGINT_ISO_POLL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POLL - # Requires: 1 >= CYGINT_ISO_POLL -}; - -# poll() implementation header -# -cdl_option CYGBLD_ISO_POLL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# NetDB utility functions -# -cdl_component CYGPKG_ISO_NETDB { - # There is no associated value. -}; - -# > -# DNS implementations -# -cdl_interface CYGINT_ISO_DNS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_DNS - # CYGINT_ISO_DNS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DNS - # Requires: 1 >= CYGINT_ISO_DNS -}; - -# DNS implementation header -# -cdl_option CYGBLD_ISO_DNS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Protocol network database implementations -# -cdl_interface CYGINT_ISO_NETDB_PROTO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_NETDB_PROTO - # CYGINT_ISO_NETDB_PROTO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_NETDB_PROTO - # Requires: 1 >= CYGINT_ISO_NETDB_PROTO -}; - -# Protocol network database implementation header -# -cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Services network database implementations -# -cdl_interface CYGINT_ISO_NETDB_SERV { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_NETDB_SERV - # CYGINT_ISO_NETDB_SERV == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_NETDB_SERV - # Requires: 1 >= CYGINT_ISO_NETDB_SERV -}; - -# Services network database implementation header -# -cdl_option CYGBLD_ISO_NETDB_SERV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_ISOINFRA_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the ISO C and POSIX infrastructure package. -# These flags are used in addition to the set of global flags. -# -cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the ISO C and POSIX infrastructure package. -# These flags are removed from the set of global flags -# if present. -# -cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# < -# Compute CRCs -# doc: ref/services-crc.html -# This package provides support for CRC calculation. Currently -# this is the POSIX 1003 defined CRC algorithm, a 32 CRC by -# Gary S. Brown, and a 16 bit CRC. -# -cdl_package CYGPKG_CRC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # package CYGPKG_COMPRESS_ZLIB - # Requires: CYGPKG_CRC -}; - -# > -# POSIX CRC tests -# -cdl_option CYGPKG_CRC_TESTS { - # Calculated value: "tests/crc_test" - # Flavor: data - # Current_value: tests/crc_test -}; - -# < -# Zlib compress and decompress package -# This package provides support for compression and -# decompression. -# -cdl_package CYGPKG_COMPRESS_ZLIB { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGPKG_CRC - # CYGPKG_CRC == current - # --> 1 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB - # ActiveIf: CYGPKG_COMPRESS_ZLIB -}; - -# > -# Override memory allocation routines. -# -cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC { - # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC - # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0 -}; - -# Should deflate() produce 'gzip' compatible output? -# If this option is set then the output of calling deflate() -# will be wrapped up as a 'gzip' compatible file. -# -cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Does this library need malloc? -# This pseudo-option will force the memalloc library to be -# required iff the application does not provide it's own -# infrastructure. -# -cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC { - # This option is not active - # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0 - # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGPKG_MEMALLOC - # CYGPKG_MEMALLOC == current - # --> 1 -}; - -# Include stdio-like utility functions -# This option enables the stdio-like zlib utility functions -# (gzread/gzwrite and friends) provided in gzio.c. -# -cdl_option CYGFUN_COMPRESS_ZLIB_GZIO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0 - # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0 - # --> 0 - # Requires: CYGINT_ISO_STDIO_FILEPOS - # CYGINT_ISO_STDIO_FILEPOS == 0 - # --> 0 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - # Requires: CYGINT_ISO_STDIO_FORMATTED_IO - # CYGINT_ISO_STDIO_FORMATTED_IO == 0 - # --> 0 - # Requires: CYGINT_ISO_STDIO_FILEACCESS - # CYGINT_ISO_STDIO_FILEACCESS == 0 - # --> 0 -}; - -# Zlib compress and decompress package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D__ECOS__ -DNO_ERRNO_H" - # value_source default - # Default value: "-D__ECOS__ -DNO_ERRNO_H" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wstrict-prototypes - # value_source default - # Default value: -Wstrict-prototypes -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# zlib tests -# -cdl_option CYGPKG_COMPRESS_ZLIB_TESTS { - # Calculated value: "tests/zlib1.c tests/zlib2.c" - # Flavor: data - # Current_value: tests/zlib1.c tests/zlib2.c -}; - -# < -# FLASH device drivers -# doc: ref/flash.html -# This option enables drivers for basic I/O services on -# flash devices. -# -cdl_package CYGPKG_IO_FLASH { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_FLASH_CONFIG - # DefaultValue: CYGPKG_IO_FLASH != 0 - # package CYGPKG_DEVS_FLASH_ONMXC - # ActiveIf: CYGPKG_IO_FLASH -}; - -# > -# Hardware FLASH device drivers -# This option enables the hardware device drivers -# for the current platform. -# -cdl_interface CYGHWR_IO_FLASH_DEVICE { - # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_FLASH - # ActiveIf: CYGHWR_IO_FLASH_DEVICE -}; - -# Hardware FLASH device drivers are not in RAM -# Use of this interface is deprecated. -# Drivers should make sure that the functions are -# linked to RAM by putting them in .2ram sections. -# -cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM - # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM - # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM -}; - -# Hardware can support block locking -# This option will be enabled by devices which can support -# locking (write-protection) of individual blocks. -# -cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL - # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 -}; - -# Hardware cannot support direct access to FLASH memory -# This option will be asserted by devices which cannot support -# direct access to the FLASH memory contents (e.g. EEPROM or NAND -# devices). In these cases, the driver must provide an appropriate -# hardware access function. -# -cdl_option CYGSEM_IO_FLASH_READ_INDIRECT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM - # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE - # component CYGHWR_DEVS_FLASH_MMC - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MMC_ESDHC - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MMC_SD - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MXC_NAND - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 -}; - -# Display status messages during flash operations -# Selecting this option will cause the drivers to print status -# messages as various flash operations are undertaken. -# -cdl_option CYGSEM_IO_FLASH_CHATTER { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Verify data programmed to flash -# Selecting this option will cause verification of data -# programmed to flash. -# -cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_IO_FLASH_READ_INDIRECT - # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM -}; - -# Platform has flash soft DIP switch write-protect -# Selecting this option will cause the state of a hardware jumper or -# dipswitch to be read by software to determine whether the flash is -# write-protected or not. -# -cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Instantiate in I/O block device API -# Provides a block device accessible using the standard I/O -# API ( cyg_io_read() etc. ) -# -cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE { - # This option is not active - # ActiveIf constraint: CYGPKG_IO - # CYGPKG_IO (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Name of flash device 1 block device -# -cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 { - # This option is not active - # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active - # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"/dev/flash1\"" - # value_source default - # Default value: "\"/dev/flash1\"" -}; - -# > -# -cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 { - # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled - # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1 - # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0 - # --> 0 - - # The following properties are affected by this value - # interface CYGINT_IO_FLASH_BLOCK_CFG_1 - # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1 -}; - -# Static configuration -# This configures the flash device 1 block device -# with static base and length -# -cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 { - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Start offset from flash base -# This gives the offset from the base of flash which this -# block device corresponds to. -# -cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# Length -# This gives the length of the region of flash given over -# to this block device. -# -cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# < -# Configuration from FIS -# This configures the flash device 1 block device -# from Redboot FIS -# -cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 { - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Name of FIS entry -# -cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"jffs2\"" - # value_source default - # Default value: "\"jffs2\"" -}; - -# < -# < -# < -# Flash device driver build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_IO_FLASH_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the flash device drivers. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the flash device drivers. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Flash device driver tests -# This option specifies the set of tests for the flash device drivers. -# -cdl_component CYGPKG_IO_FLASH_TESTS { - # Calculated value: "tests/flash1" - # Flavor: data - # Current_value: tests/flash1 -}; - -# > -# Start offset from flash base -# This gives the offset from the base of flash where tests -# can be run. It is important to set this correctly, as an -# incorrect value could allow the tests to write over critical -# portions of the FLASH device and possibly render the target -# board totally non-functional. -# -cdl_option CYGNUM_IO_FLASH_TEST_OFFSET { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# Length -# This gives the length of the region of flash used for testing. -# -cdl_option CYGNUM_IO_FLASH_TEST_LENGTH { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# < -# < -# Support FLASH memory on Freescale MXC platforms -# -cdl_package CYGPKG_DEVS_FLASH_ONMXC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_FLASH - # CYGPKG_IO_FLASH == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# MXC platform MMC card support -# When this option is enabled, it indicates MMC card is -# supported on the MXC platforms -# -cdl_component CYGHWR_DEVS_FLASH_MMC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) -}; - -# > -# MXC platform MMC card for newer SDHC controllers -# -cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC { - # This option is not active - # The parent CYGHWR_DEVS_FLASH_MMC is disabled - # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 || - # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 - # CYGPKG_HAL_ARM_MX37 (unknown) == 0 - # CYGPKG_HAL_ARM_MX35 (unknown) == 0 - # CYGPKG_HAL_ARM_MX25 (unknown) == 0 - # CYGPKG_HAL_ARM_MX51 (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 -}; - -# MXC platform MMC card for older MMC/SD controllers -# -cdl_option CYGHWR_DEVS_FLASH_MMC_SD { - # This option is not active - # The parent CYGHWR_DEVS_FLASH_MMC is disabled - # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS - # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0 - # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 -}; - -# < -# MXC platform NOR flash memory support -# When this option is enabled, it indicates NOR flash is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_NOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR - # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1 - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) -}; - -# MXC platform NAND flash memory support -# When this option is enabled, it indicates NAND flash is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_NAND { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH - # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND - # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND -}; - -# i.MX platform SPI NOR flash memory support -# When this option is enabled, it indicates SPI NOR flash is -# supported on the i.MX platforms -# -cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # --> 0 -}; - -# MXC platform ATA support -# When this option is enabled, it indicates ATA is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_ATA { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Use a flash based Bad Block Table -# -cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH { - # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # --> 1 - - # There is no associated value. -}; - -# > -# When this option is enabled, the driver will search for a flash -# based bad block table -# -cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# header file defining the NAND BBT descriptor -# defines the name of the header file that describes the BBT layout -# -cdl_component CYGHWR_FLASH_NAND_BBT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 -}; - -# Number of blocks to reserve for BBT -# Number of blocks to reserve for BBT -# -cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 -}; - -# < -# MXC platform multi flash memory support -# When this option is enabled, it indicates multi flashes are -# supported on the MXC platforms (like NAND and NOR) -# -cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI { - # This option is not active - # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # CYGHWR_DEVS_FLASH_MMC == 0 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # CYGHWR_DEVS_FLASH_MMC == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# MXC platform NAND flash reset workaround support -# When this option is enabled, it indicates 0xFFFF is used for -# the NAND reset command instead of 0xFF. -# -cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND { - # No options implement this inferface - # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # --> 1 - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# < -# < -# Dynamic memory allocation -# doc: ref/memalloc.html -# This package provides memory allocator infrastructure required for -# dynamic memory allocators, including the ISO standard malloc -# interface. It also contains some sample implementations. -# -cdl_package CYGPKG_MEMALLOC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC - # Requires: CYGPKG_MEMALLOC -}; - -# > -# Memory allocator implementations -# This component contains configuration options related to the -# various memory allocators available. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATORS { - # There is no associated value. -}; - -# > -# Fixed block allocator -# This component contains configuration options related to the -# fixed block memory allocator. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Simple variable block allocator -# This component contains configuration options related to the -# simple variable block memory allocator. This allocator is not -# very fast, and in particular does not scale well with large -# numbers of allocations. It is however very compact in terms of -# code size and does not have very much overhead per allocation. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are added that allow a thread to wait until memory -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Coalesce memory -# The variable-block memory allocator can perform coalescing -# of memory whenever the application code releases memory back -# to the pool. This coalescing reduces the possibility of -# memory fragmentation problems, but involves extra code and -# processor cycles. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE - # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE -}; - -# < -# Doug Lea's malloc -# This component contains configuration options related to the -# port of Doug Lea's memory allocator, normally known as -# dlmalloc. dlmalloc has a reputation for being both fast -# and space-conserving, as well as resisting fragmentation well. -# It is a common choice for a general purpose allocator and -# has been used in both newlib and Linux glibc. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC { - # There is no associated value. -}; - -# > -# Debug build -# Doug Lea's malloc implementation has substantial amounts -# of internal checking in order to verify the operation -# and consistency of the allocator. However this imposes -# substantial overhead on each operation. Therefore this -# checking may be individually disabled. -# -cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 != CYGDBG_USE_ASSERTS - # CYGDBG_USE_ASSERTS == 0 - # --> 0 - # Requires: CYGDBG_USE_ASSERTS - # CYGDBG_USE_ASSERTS == 0 - # --> 0 -}; - -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 -}; - -# Support more than one instance -# Having this option disabled allows important -# implementation structures to be declared as a single -# static instance, allowing faster access. However this -# would fail if there is more than one instance of -# the dlmalloc allocator class. Therefore this option can -# be enabled if multiple instances are required. Note: as -# a special case, if this allocator is used as the -# implementation of malloc, and it can be determined there -# is more than one malloc pool, then this option will be -# silently enabled. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use system memmove() and memset() -# This may be used to control whether memset() and memmove() -# are used within the implementation. The alternative is -# to use some macro equivalents, which some people report -# are faster in some circumstances. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 0 != CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# Minimum alignment of allocated blocks -# This option controls the minimum alignment that the -# allocated memory blocks are aligned on, specified as -# 2^N. Note that using large mininum alignments can lead -# to excessive memory wastage. -# -cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 3 - # value_source default - # Default value: 3 - # Legal values: 3 to 10 -}; - -# < -# Variable block allocator with separate metadata -# This component contains configuration options related to the -# variable block memory allocator with separate metadata. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# < -# Kernel C API support for memory allocation -# This option must be enabled to provide the extensions required -# to support integration into the kernel C API. -# -cdl_option CYGFUN_MEMALLOC_KAPI { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGFUN_KERNEL_API_C - # CYGFUN_KERNEL_API_C (unknown) == 0 - # --> 0 -}; - -# malloc(0) returns NULL -# This option controls the behavior of malloc(0) ( or calloc with -# either argument 0 ). It is permitted by the standard to return -# either a NULL pointer or a unique pointer. Enabling this option -# forces a NULL pointer to be returned. -# -cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Breakpoint site when running out of memory -# Whenever the system runs out of memory, it invokes this function -# before either going to sleep waiting for memory to become -# available or returning failure. -# -cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# malloc() and supporting allocators -# This component enables support for dynamic memory -# allocation as supplied by the functions malloc(), -# free(), calloc() and realloc(). As these -# functions are often used, but can have quite an -# overhead, disabling them here can ensure they -# cannot even be used accidentally when static -# allocation is preferred. Within this component are -# various allocators that can be selected for use -# as the underlying implementation of the dynamic -# allocation functions. -# -cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS { - # ActiveIf constraint: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Use external heap definition -# This option allows other components in the -# system to override the default system -# provision of heap memory pools. This should -# be set to a header which provides the equivalent -# definitions to . -# -cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Use external implementation of joining multiple heaps -# The default implementation of joining multiple heaps -# is fine for the case where there are multiple disjoint -# memory regions of the same type. However, in a system -# there might be e.g. a small amount of internal SRAM and -# a large amount of external DRAM. The SRAM is faster and -# the DRAM is slower. An application can implement some -# heuristic to choose which pool to allocate from. This -# heuristic can be highly application specific. -# -cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# malloc() allocator implementations -# -cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS { - # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled - # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 - # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS - # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 -}; - -# malloc() implementation instantiation data -# Memory allocator implementations that are capable of being -# used underneath malloc() must be instantiated. The code -# to do this is set in this option. It is only intended to -# be set by the implementation, not the user. -# -cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value - # value_source default - # Default value: - - # The following properties are affected by this value - # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" -}; - -# Simple variable block implementation -# This causes malloc() to use the simple -# variable block allocator. -# -cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == - # --> 0 - # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE - # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1 - # --> 1 -}; - -# Doug Lea's malloc implementation -# This causes malloc() to use a version of Doug Lea's -# malloc (dlmalloc) as the underlying implementation. -# -cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == - # --> 1 -}; - -# < -# Size of the fallback dynamic memory pool in bytes -# If *no* heaps are configured in your memory layout, -# dynamic memory allocation by -# malloc() and calloc() must be from a fixed-size, -# contiguous memory pool (note here that it is the -# pool that is of a fixed size, but malloc() is still -# able to allocate variable sized chunks of memory -# from it). This option is the size -# of that pool, in bytes. Note that not all of -# this is available for programs to -# use - some is needed for internal information -# about memory regions, and some may be lost to -# ensure that memory allocation only returns -# memory aligned on word (or double word) -# boundaries - a very common architecture -# constraint. -# -cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 16384 - # value_source default - # Default value: 16384 - # Legal values: 32 to 0x7fffffff -}; - -# Common memory allocator package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_MEMALLOC_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# Tests -# This option specifies the set of tests for this package. -# -cdl_option CYGPKG_MEMALLOC_TESTS { - # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2" - # Flavor: data - # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2 -}; - -# < -# < -# Common error code support -# This package contains the common list of error and -# status codes. It is held centrally to allow -# packages to interchange error codes and status -# codes in a common way, rather than each package -# having its own conventions for error/status -# reporting. The error codes are modelled on the -# POSIX style naming e.g. EINVAL etc. This package -# also provides the standard strerror() function to -# convert error codes to textual representation, as -# well as an implementation of the errno idiom. -# -cdl_package CYGPKG_ERROR { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "" - # CYGBLD_ISO_ERRNO_CODES_HEADER == - # --> 1 -}; - -# > -# errno variable -# This package controls the behaviour of the -# errno variable (or more strictly, expression) -# from . -# -cdl_component CYGPKG_ERROR_ERRNO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_ERRNO_HEADER == "" - # CYGBLD_ISO_ERRNO_HEADER == - # --> 1 -}; - -# > -# Per-thread errno -# This option controls whether the standard error -# code reporting variable errno is a per-thread -# variable, rather than global. -# -cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Tracing level -# Trace verbosity level for debugging the errno -# retrieval mechanism in errno.cxx. Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# < -# strerror function -# This package controls the presence and behaviour of the -# strerror() function from -# -cdl_option CYGPKG_ERROR_STRERROR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STRERROR_HEADER == "" - # CYGBLD_ISO_STRERROR_HEADER == - # --> 1 -}; - -# Error package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_ERROR_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the error package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_ERROR_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the error package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_ERROR_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# < -# I2C driver for FSL MXC-based platforms -# -cdl_package CYGPKG_DEVS_MXC_I2C { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# ipu driver for mxc -# -cdl_package CYGPKG_DEVS_IMX_IPU { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGHWR_MX53_LCD_LOGO - # ActiveIf: CYGPKG_DEVS_IMX_IPU -}; - -# > -# IPU version 3EX support -# When this option is enabled, it indicates the IPU version -# is 3EX -# -cdl_option CYGHWR_DEVS_IPU_3_EX { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 -}; - -# IPU version 3D support -# When this option is enabled, it indicates the IPU version -# is 3D -# -cdl_option CYGHWR_DEVS_IPU_3_D { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# < - diff --git a/config/TX53-1xx2.ecc b/config/TX53-1xx2.ecc deleted file mode 100644 index 9b247cd4..00000000 --- a/config/TX53-1xx2.ecc +++ /dev/null @@ -1,10364 +0,0 @@ -# eCos saved configuration - -# ---- commands -------------------------------------------------------- -# This section contains information about the savefile format. -# It should not be edited. Any modifications made to this section -# may make it impossible for the configuration tools to read -# the savefile. - -cdl_savefile_version 1; -cdl_savefile_command cdl_savefile_version {}; -cdl_savefile_command cdl_savefile_command {}; -cdl_savefile_command cdl_configuration { description hardware template package }; -cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value }; -cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value }; - -# ---- toplevel -------------------------------------------------------- -# This section defines the toplevel configuration object. The only -# values that can be changed are the name of the configuration and -# the description field. It is not possible to modify the target, -# the template or the set of packages simply by editing the lines -# below because these changes have wide-ranging effects. Instead -# the appropriate tools should be used to make such modifications. - -cdl_configuration eCos { - description "" ; - - # These fields should not be modified. - hardware tx53karo ; - template redboot ; - package -hardware CYGPKG_HAL_ARM current ; - package -hardware CYGPKG_HAL_ARM_MX53 current ; - package -hardware CYGPKG_HAL_ARM_TX53KARO current ; - package -template CYGPKG_HAL current ; - package -template CYGPKG_INFRA current ; - package -template CYGPKG_REDBOOT current ; - package -template CYGPKG_ISOINFRA current ; - package -template CYGPKG_LIBC_STRING current ; - package -template CYGPKG_CRC current ; - package -hardware CYGPKG_IO_ETH_DRIVERS current ; - package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ; - package -hardware CYGPKG_DEVS_ETH_FEC current ; - package -hardware CYGPKG_COMPRESS_ZLIB current ; - package -hardware CYGPKG_IO_FLASH current ; - package -hardware CYGPKG_DEVS_FLASH_ONMXC current ; - package -template CYGPKG_MEMALLOC current ; - package -template CYGPKG_DEVS_ETH_PHY current ; - package -template CYGPKG_LIBC_I18N current ; - package -template CYGPKG_LIBC_STDLIB current ; - package -template CYGPKG_ERROR current ; - package -hardware CYGPKG_DEVS_MXC_I2C current ; - package -hardware CYGPKG_DEVS_IMX_IPU current ; -}; - -# ---- conflicts ------------------------------------------------------- -# There are no conflicts. - -# ---- contents -------------------------------------------------------- -# > -# > -# Global build options -# Global build options including control over -# compiler flags, linker flags and choice of toolchain. -# -cdl_component CYGBLD_GLOBAL_OPTIONS { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Global command prefix -# This option specifies the command prefix used when -# invoking the build tools. -# -cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX { - # Flavor: data - user_value arm-cortexa8-linux-gnu - # value_source user - # Default value: arm-926ejs-linux-gnu -}; - -# Global compiler flags -# This option controls the global compiler flags which are used to -# compile all packages by default. Individual packages may define -# options which override these global flags. -# -cdl_option CYGBLD_GLOBAL_CFLAGS { - # Flavor: data - user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # The inferred value should not be edited directly. - inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # value_source user - # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS - # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror") - # option CYGBLD_INFRA_CFLAGS_PIPE - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe") -}; - -# Global linker flags -# This option controls the global linker flags. Individual -# packages may define options which override these global flags. -# -cdl_option CYGBLD_GLOBAL_LDFLAGS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" - # value_source default - # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" -}; - -# Build common GDB stub ROM image -# Unless a target board has specific requirements to the -# stub implementation, it can use a simple common stub. -# This option, which gets enabled by platform HALs as -# appropriate, controls the building of the common stub. -# -cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 -}; - -# < -# ISO C library string functions -# doc: ref/libc.html -# This package provides string functions specified by the -# ISO C standard - ISO/IEC 9899:1990. -# -cdl_package CYGPKG_LIBC_STRING { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "" - # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "" - # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "" - # CYGBLD_ISO_STRING_STRFUNCS_HEADER == - # --> 1 - # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "" - # CYGBLD_ISO_STRTOK_R_HEADER == - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# > -# Inline versions of functions -# This option chooses whether some of the -# particularly simple string functions from -# are available as inline -# functions. This may improve performance, and as -# the functions are small, may even improve code -# size. -# -cdl_option CYGIMP_LIBC_STRING_INLINES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Optimize string functions for code size -# This option tries to reduce string function -# code size at the expense of execution speed. The -# same effect can be produced if the code is -# compiled with the -Os option to the compiler. -# -cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide BSD compatibility functions -# Enabling this option causes various compatibility functions -# commonly found in the BSD UNIX operating system to be included. -# These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp, -# strncasecmp, index, rindex and swab. -# -cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "" - # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == - # --> 1 - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 -}; - -# strtok -# These options control the behaviour of the -# strtok() and strtok_r() string tokenization -# functions. -# -cdl_component CYGPKG_LIBC_STRING_STRTOK { - # There is no associated value. -}; - -# > -# Per-thread strtok() -# This option controls whether the string function -# strtok() has its state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Note there is also a POSIX-standard strtok_r() -# function to achieve a similar effect with user -# support. Enabling this option will use one slot -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Tracing level -# Trace verbosity level for debugging the -# functions strtok() and strtok_r(). Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# < -# strdup -# This option indicates whether strdup() is to be supported. -# -cdl_option CYGFUN_LIBC_STRING_STRDUP { - # ActiveIf constraint: CYGINT_ISO_MALLOC - # CYGINT_ISO_MALLOC == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# C library string functions build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_STRING_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library string function tests -# This option specifies the set of tests for the C library -# string functions. -# -cdl_option CYGPKG_LIBC_STRING_TESTS { - # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2" - # Flavor: data - # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2 -}; - -# < -# < -# Common ethernet support -# doc: ref/io-eth-drv-generic.html -# Platform independent ethernet drivers -# -cdl_package CYGPKG_IO_ETH_DRIVERS { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_NETWORKING - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_ARM_TX53 - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_FEC - # ActiveIf: CYGPKG_IO_ETH_DRIVERS - # package CYGPKG_DEVS_ETH_PHY - # ActiveIf: CYGPKG_IO_ETH_DRIVERS -}; - -# > -# Network drivers -# -cdl_interface CYGHWR_NET_DRIVERS { - # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE - # ActiveIf: CYGHWR_NET_DRIVERS > 1 - # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE - # ActiveIf: CYGHWR_NET_DRIVERS > 1 -}; - -# Driver supports multicast addressing -# This interface defines whether or not a driver can handle -# requests for multicast addressing. -# -cdl_interface CYGINT_IO_ETH_MULTICAST { - # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# Support printing driver debug information -# Selecting this option will include code to allow the driver to -# print lots of information on diagnostic output such as full -# packet dumps. -# -cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Driver debug output verbosity -# The value of this option indicates the default verbosity -# level of debugging output. 0 means no debugging output -# is made by default. Higher values indicate higher verbosity. -# The verbosity level may also be changed at run time by -# changing the variable cyg_io_eth_net_debug. -# -cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Size of scatter-gather I/O lists -# A scatter-gather list is used to pass requests to/from -# the physical device driver. This list can typically be -# small, as the data is normally already packed into reasonable -# chunks. -# -cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 -}; - -# Support for standard eCos TCP/IP stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_NET { - # This option is not active - # ActiveIf constraint: CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 -}; - -# > -# Warn when there are no more mbufs -# Warnings about running out of mbufs are printed to the -# diagnostic output channel via diag_printf() if this option -# is enabled. Mbufs are the network stack's basic dynamic -# memory objects that hold all packets in transit; running -# out is bad for performance but not fatal, not a crash. -# You might want to turn off the warnings to preserve realtime -# properties of the system even in extremis. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Simulate network failures for testing -# This package contains a suite of simulated failure modes -# for the ethernet device layer, including dropping and/or -# corrupting received packets, dropping packets queued for -# transmission, and simulating a complete network break. -# It requires the kernel as a source of time information. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Drop incoming packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Corrupt incoming packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Drop outgoing packets (percentage) -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 10 - # value_source default - # Default value: 1 10 - # Legal values: 10 50 80 -}; - -# Simulate a line cut from time to time -# This option causes the system to drop all packets for a -# short random period (10s of seconds), and then act -# normally for up to 4 times that long. This simulates your -# sysadmin fiddling with plugs in the network switch -# cupboard. -# -cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT { - # This option is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active - # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# < -# Support for stand-alone network stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE { - # ActiveIf constraint: !CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 -}; - -# > -# Pass packets to an alternate stack -# Define this to allow packets seen by this layer to be -# passed on to the previous logical layer, i.e. when -# stand-alone processing replaces system (eCos) processing. -# -cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 0 != CYGPKG_REDBOOT_NETWORKING - # CYGPKG_REDBOOT_NETWORKING == 1 - # --> 1 -}; - -# Number of [network] buffers -# This option is used to allocate space to buffer incoming network -# packets. These buffers are used to hold data until they can be -# logically processed by higher layers. -# -cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 - # Legal values: 2 to 32 -}; - -# Show driver warnings -# Selecting this option will allows the stand-alone ethernet driver -# to display warnings on the system console when incoming network -# packets are being discarded due to lack of buffer space. -# -cdl_option CYGSEM_IO_ETH_DRIVERS_WARN { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Support for lwIP network stack. -# -cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP { - # This option is not active - # ActiveIf constraint: CYGPKG_NET_LWIP - # CYGPKG_NET_LWIP (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: !CYGPKG_NET - # CYGPKG_NET (unknown) == 0 - # --> 1 -}; - -# Interrupt support required -# This interface is used to indicate to the low -# level device drivers that interrupt driven operation -# is required by higher layers. -# -cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED { - # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled - # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value -}; - -# Common ethernet support build options -# -cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the common ethernet support package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D_KERNEL -D__ECOS" - # value_source default - # Default value: "-D_KERNEL -D__ECOS" -}; - -# < -# Ethernet driver for Ka-Ro electronics TX53 processor module -# -cdl_package CYGPKG_DEVS_ETH_ARM_TX53 { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# FEC ethernet driver required -# -cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED { - # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # package CYGPKG_DEVS_ETH_FEC - # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED -}; - -# Ka-Ro TX53 ethernet port driver -# This option includes the ethernet device driver for the -# MXC Board port. -# -cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1 - # --> 1 - # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700 - # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1 - # --> 1 -}; - -# > -# Device name for the ETH0 ethernet driver -# This option sets the name of the ethernet device. -# -cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"eth0\"" - # value_source default - # Default value: "\"eth0\"" -}; - -# OUI part of MAC address -# This option sets OUI part (manufacturer ID) of the MAC address -# for validation. -# -cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI { - # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "{ 0x00, 0x0c, 0xc6 }" - # value_source default - # Default value: "{ 0x00, 0x0c, 0xc6 }" -}; - -# < -# < -# Driver for fast ethernet controller. -# Driver for fast ethernet controller. -# -cdl_package CYGPKG_DEVS_ETH_FEC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED - # CYGINT_DEVS_ETH_FEC_REQUIRED == 1 - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# MXC FEC ethernet driver build options -# -cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the Cirrus Logic ethernet driver package. -# These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D_KERNEL -D__ECOS" - # value_source default - # Default value: "-D_KERNEL -D__ECOS" -}; - -# < -# MXC FEC MII Gasket for RMII mode -# This option enables the use of the MII Gasket for -# RMII mode found in i.MX25 and i.MX53 processors. -# -cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK { - # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53 - # CYGPKG_HAL_ARM_MX25 (unknown) == 0 - # CYGPKG_HAL_ARM_MX53 == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Ethernet transceiver (PHY) support -# API for ethernet PHY devices -# -cdl_package CYGPKG_DEVS_ETH_PHY { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 -}; - -# > -# Enable driver debugging -# Enables the diagnostic debug messages on the -# console device. -# -cdl_option CYGDBG_DEVS_ETH_PHY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Time period (seconds) to wait for auto-negotiation -# The length of time to wait for auto-negotiation to complete -# before giving up and declaring the link dead/missing. -# -cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 5 - # value_source default - # Default value: 5 -}; - -# NSDP83847 -# Include support for National Semiconductor DP83847 DsPHYTER II -# -cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# AMD 79C874 -# Include support for AMD 79C874 NetPHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Intel LXT972 -# Include support for Intel LXT972xxx PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1890 -# Include support for ICS 1890 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1892 -# Include support for ICS 1892 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# ICS 1893 -# Include support for ICS 1893 and 1893AF PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Davicom DM9161A -# Include support for the Davicom DM9161A PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Micrel KS8721 -# Include support for the Micrel KS8721 PHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# SMSC LAN8700 -# Include support for SMSC LAN8700 NetPHY -# -cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 - # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700 -}; - -# < -# < -# ISO C library internationalization functions -# doc: ref/libc.html -# This package provides internationalization functions specified by the -# ISO C standard - ISO/IEC 9899:1990. These include locale-related -# functionality and functionality. -# -cdl_package CYGPKG_LIBC_I18N { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# > -# Supported locales -# These options determine which locales other than the "C" locale -# are supported and hence contribute to the size of the executable. -# -cdl_component CYGPKG_LIBC_I18N_LOCALES { - # There is no associated value. -}; - -# > -# Support for multiple locales required -# -cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED { - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled - # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "" - # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0 - # --> 0 - - # The following properties are affected by this value -}; - -# C-SJIS locale support -# This option controls if the "C-SJIS" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese SJIS multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# C-JIS locale support -# This option controls if the "C-JIS" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese JIS multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# C-EUCJP locale support -# This option controls if the "C-EUCJP" locale will be -# supported by setlocale(). The locale is a hybrid locale -# that is mostly the "C" locale with Japanese EUCJP multibyte -# support added. -# -cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE - # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) -}; - -# < -# Newlib's ctype implementation -# This option enables the implementation of the ctype functions -# that comes with newlib. It is table driven and therefore -# exhibits different performance characteristics. It also offers -# a limited amount of binary compatibility -# with newlib so that programs linked against newlib ctype/locale -# do not need to be recompiled when linked with eCos. -# -cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # CYGBLD_ISO_CTYPE_HEADER == - # --> 0 -}; - -# Per-thread multibyte state -# This option controls whether the multibyte character -# handling functions mblen(), mbtowc(), and wctomb(), -# have their state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Enabling this option will use three slots -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGVAR_KERNEL_THREADS_DATA != 0 - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Size of locale name strings -# This option controls the maximum size of -# locale names and is used, among other things -# to instantiate a static string used -# as a return value from the -# setlocale() function. When requesting the -# current locale settings with LC_ALL, a string -# must be constructed to contain this data, rather -# than just returning a constant string. This -# string data is stored in the static string. -# This depends on the length of locale names, -# hence this option. If just the C locale is -# present, this option can be set as low as 2. -# -cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 2 - # value_source default - # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) - # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0 - # --> 2 - # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff - # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0 - # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0 -}; - -# Inline versions of functions -# This option chooses whether the simple character -# classification and conversion functions (e.g. -# isupper(), isalpha(), toupper(), etc.) -# from are available as inline -# functions. This may improve performance and as -# the functions are small, may even improve code -# size. -# -cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # CYGBLD_ISO_CTYPE_HEADER == - # --> 1 -}; - -# C library i18n functions build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_I18N_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the C library. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library i18n function tests -# This option specifies the set of tests for the C library -# i18n functions. -# -cdl_option CYGPKG_LIBC_I18N_TESTS { - # Calculated value: "tests/ctype tests/setlocale tests/i18nmb" - # Flavor: data - # Current_value: tests/ctype tests/setlocale tests/i18nmb -}; - -# < -# < -# ISO C library general utility functions -# doc: ref/libc.html -# This package provides general utility functions in -# as specified by the ISO C standard - ISO/IEC 9899:1990. -# -cdl_package CYGPKG_LIBC_STDLIB { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 -}; - -# > -# Inline versions of functions -# This option chooses whether some of the -# particularly simple standard utility functions -# from are available as inline -# functions. This may improve performance, and as -# the functions are small, may even improve code -# size. -# -cdl_component CYGIMP_LIBC_STDLIB_INLINES { - # There is no associated value. -}; - -# > -# abs() / labs() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "" - # CYGBLD_ISO_STDLIB_ABS_HEADER == - # --> 1 -}; - -# div() / ldiv() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "" - # CYGBLD_ISO_STDLIB_DIV_HEADER == - # --> 1 -}; - -# atof() / atoi() / atol() -# -cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "" - # CYGBLD_ISO_STDLIB_STRCONV_HEADER == - # --> 1 -}; - -# < -# Random number generation -# These options control the behaviour of the -# functions rand(), srand() and rand_r() -# -cdl_component CYGPKG_LIBC_RAND { - # There is no associated value. -}; - -# > -# Per-thread random seed -# doc: ref/libc-thread-safety.html -# This option controls whether the pseudo-random -# number generation functions rand() and srand() -# have their state recorded on a per-thread -# basis rather than global. If this option is -# disabled, some per-thread space can be saved. -# Note there is also a POSIX-standard rand_r() -# function to achieve a similar effect with user -# support. Enabling this option will use one slot -# of kernel per-thread data. You should ensure you -# have enough slots configured for all your -# per-thread data. -# -cdl_option CYGSEM_LIBC_PER_THREAD_RAND { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Random number seed -# This selects the initial random number seed for -# rand()'s pseudo-random number generator. For -# strict ISO standard compliance, this should be 1, -# as per section 7.10.2.2 of the standard. -# -cdl_option CYGNUM_LIBC_RAND_SEED { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Legal values: 0 to 0x7fffffff -}; - -# Tracing level -# Trace verbosity level for debugging the rand(), -# srand() and rand_r() functions. Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# Simplest implementation -# This provides a very simple implementation of rand() -# that does not perform well with randomness in the -# lower significant bits. However it is exceptionally -# fast. It uses the sample algorithm from the ISO C -# standard itself. -# -cdl_option CYGIMP_LIBC_RAND_SIMPLEST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Simple implementation #1 -# This provides a very simple implementation of rand() -# based on the simplest implementation above. However -# it does try to work around the lack of randomness -# in the lower significant bits, at the expense of a -# little speed. -# -cdl_option CYGIMP_LIBC_RAND_SIMPLE1 { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# Knuth implementation #1 -# This implements a slightly more complex algorithm -# published in Donald E. Knuth's Art of Computer -# Programming Vol.2 section 3.6 (p.185 in the 3rd ed.). -# This produces better random numbers than the -# simplest approach but is slower. -# -cdl_option CYGIMP_LIBC_RAND_KNUTH1 { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 -}; - -# < -# Provides strtod() -# This option allows use of the utility function -# strtod() (and consequently atof()) to convert -# from string to double precision floating point -# numbers. Disabling this option removes the -# dependency on the math library package. -# -cdl_option CYGFUN_LIBC_strtod { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 != CYGPKG_LIBM - # CYGPKG_LIBM (unknown) == 0 - # --> 0 - # Requires: CYGPKG_LIBM - # CYGPKG_LIBM (unknown) == 0 - # --> 0 -}; - -# Provides long long conversion functions -# Enabling this option will provide support for the strtoll(), -# strtoull() and atoll() conversion functions, which are -# the long long variants of the standard versions of these -# functions. Supporting this requires extra code and compile -# time. -# -cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# bsearch() tracing level -# Trace verbosity level for debugging the -# binary search function bsearch(). Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# qsort() tracing level -# Trace verbosity level for debugging the -# quicksort function qsort(). Increase this value -# to get additional trace output. -# -cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# C library stdlib build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_LIBC_STDLIB_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# C library stdlib tests -# This option specifies the set of tests for this package. -# -cdl_option CYGPKG_LIBC_STDLIB_TESTS { - # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul" - # Flavor: data - # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul -}; - -# < -# < -# < -# eCos HAL -# doc: ref/the-ecos-hardware-abstraction-layer.html -# The eCos HAL package provide a porting layer for -# higher-level parts of the system such as the kernel and the -# C library. Each installation should have HAL packages for -# one or more architectures, and for each architecture there -# may be one or more supported platforms. It is necessary to -# select one target architecture and one platform for that -# architecture. There are also a number of configuration -# options that are common to all HAL packages. -# -cdl_package CYGPKG_HAL { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_INFRA - # CYGPKG_INFRA == current - # --> 1 - - # The following properties are affected by this value -}; - -# > -# Platform-independent HAL options -# A number of configuration options are common to most or all -# HAL packages, for example options controlling how much state -# should be saved during a context switch. The implementations -# of these options will vary from architecture to architecture. -# -cdl_component CYGPKG_HAL_COMMON { - # There is no associated value. -}; - -# > -# Provide eCos kernel support -# The HAL can be configured to either support the full eCos -# kernel, or to support only very simple applications which do -# not require a full kernel. If kernel support is not required -# then some of the startup, exception, and interrupt handling -# code can be eliminated. -# -cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - # Requires: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 -}; - -# HAL exception support -# When a processor exception occurs, for example an attempt to -# execute an illegal instruction or to perform a divide by -# zero, this exception may be handled in a number of different -# ways. If the target system has gdb support then typically -# the exception will be handled by gdb code. Otherwise if the -# HAL exception support is enabled then the HAL will invoke a -# routine deliver_exception(). Typically this routine will be -# provided by the eCos kernel, but it is possible for -# application code to provide its own implementation. If the -# HAL exception support is not enabled and a processor -# exception occurs then the behaviour of the system is -# undefined. -# -cdl_option CYGPKG_HAL_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_KERNEL_EXCEPTIONS - # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0 - # --> 0 - # Requires: CYGPKG_KERNEL_EXCEPTIONS - # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0 - # --> 0 -}; - -# Stop calling constructors early -# This option supports environments where some constructors -# must be run in the context of a thread rather than at -# simple system startup time. A boolean flag named -# cyg_hal_stop_constructors is set to 1 when constructors -# should no longer be invoked. It is up to some other -# package to deal with the rest of the constructors. -# In the current version this is only possible with the -# C library. -# -cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS - # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0 - # --> 0 -}; - -# HAL uses the MMU and allows for CDL manipulation of it's use -# -cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_HAL_INSTALL_MMU_TABLES - # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES -}; - -# Install MMU tables. -# This option controls whether this application installs -# its own Memory Management Unit (MMU) tables, or relies on the -# existing environment to run. -# -cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES - # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYG_HAL_STARTUP != "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_STATIC_MMU_TABLES - # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES -}; - -# Use static MMU tables. -# This option defines an environment where any Memory -# Management Unit (MMU) tables are constant. Normally used by ROM -# based environments, this provides a way to save RAM usage which -# would otherwise be required for these tables. -# -cdl_option CYGSEM_HAL_STATIC_MMU_TABLES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES - # CYGSEM_HAL_INSTALL_MMU_TABLES == 0 - # --> 0 -}; - -# Route diagnostic output to debug channel -# If not inheriting the console setup from the ROM monitor, -# it is possible to redirect diagnostic output to the debug -# channel by enabling this option. Depending on the debugger -# used it may also be necessary to select a mangler for the -# output to be displayed by the debugger. -# -cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN { - # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0 - # --> 1 - # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # CYGPKG_HAL_ARM == current - # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0 - # CYGPKG_HAL_V85X_V850 (unknown) == 0 - # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # The following properties are affected by this value - # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN -}; - -# > -# Mangler used on diag output -# It is sometimes necessary to mangle (encode) the -# diag ASCII text output in order for it to show up at the -# other end. In particular, GDB may silently ignore raw -# ASCII text. -# -cdl_option CYGSEM_HAL_DIAG_MANGLER { - # This option is not active - # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value GDB - # value_source default - # Default value: GDB - # Legal values: "GDB" "None" -}; - -# < -# < -# HAL interrupt handling -# A number of configuration options related to interrupt -# handling are common to most or all HAL packages, even though -# the implementations will vary from architecture to -# architecture. -# -cdl_component CYGPKG_HAL_COMMON_INTERRUPTS { - # There is no associated value. -}; - -# > -# Use separate stack for interrupts -# When an interrupt occurs this interrupt can be handled either -# on the current stack or on a separate stack maintained by the -# HAL. Using a separate stack requires a small number of extra -# instructions in the interrupt handling code, but it has the -# advantage that it is no longer necessary to allow extra space -# in every thread stack for the interrupt handlers. The amount -# of extra space required depends on the interrupt handlers -# that are being used. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # package CYGPKG_REDBOOT - # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 -}; - -# Interrupt stack size -# This configuration option specifies the stack size in bytes -# for the interrupt stack. Typically this should be a multiple -# of 16, but the exact requirements will vary from architecture -# to architecture. The interrupt stack serves two separate -# purposes. It is used as the stack during system -# initialization. In addition, if the interrupt system is -# configured to use a separate stack then all interrupts will -# be processed on this stack. The exact memory requirements -# will vary from application to application, and will depend -# heavily on whether or not other interrupt-related options, -# for example nested interrupts, are enabled. On most targets, -# in a configuration with no kernel this stack will also be -# the stack used to invoke the application, and must obviously -# be appropriately large in that case. -# -cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32768 - # value_source default - # Default value: CYGPKG_KERNEL ? 4096 : 32768 - # CYGPKG_KERNEL (unknown) == 0 - # --> 32768 - # Legal values: 128 to 1048576 -}; - -# Allow nested interrupts -# When an interrupt occurs the HAL interrupt handling code can -# either leave interrupts disabled for the duration of the -# interrupt handling code, or by doing some extra work it can -# reenable interrupts before invoking the interrupt handler and -# thus allow nested interrupts to happen. If all the interrupt -# handlers being used are small and do not involve any loops -# then it is usually better to disallow nested interrupts. -# However if any of the interrupt handlers are more complicated -# than nested interrupts will usually be required. -# -cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Save minimum context on interrupt -# The HAL interrupt handling code can exploit the calling conventions -# defined for a given architecture to reduce the amount of state -# that has to be saved. Generally this improves performance and -# reduces code size. However it can make source-level debugging -# more difficult. -# -cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT -}; - -# Chain all interrupts together -# Interrupts can be attached to vectors either singly, or be -# chained together. The latter is necessary if there is no way -# of discovering which device has interrupted without -# inspecting the device itself. It can also reduce the amount -# of RAM needed for interrupt decoding tables and code. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Ignore spurious [fleeting] interrupts -# On some hardware, interrupt sources may not be de-bounced or -# de-glitched. Rather than try to handle these interrupts (no -# handling may be possible), this option allows the HAL to simply -# ignore them. In most cases, if the interrupt is real it will -# reoccur in a detectable form. -# -cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# HAL context switch support -# A number of configuration options related to thread contexts -# are common to most or all HAL packages, even though the -# implementations will vary from architecture to architecture. -# -cdl_component CYGPKG_HAL_COMMON_CONTEXT { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Use minimum thread context -# The thread context switch code can exploit the calling -# conventions defined for a given architecture to reduce the -# amount of state that has to be saved during a context -# switch. Generally this improves performance and reduces -# code size. However it can make source-level debugging more -# difficult. -# -cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM -}; - -# < -# Explicit control over cache behaviour -# These options let the default behaviour of the caches -# be easily configurable. -# -cdl_component CYGPKG_HAL_CACHE_CONTROL { - # There is no associated value. -}; - -# > -# Enable DATA cache on startup -# Enabling this option will cause the data cache to be enabled -# as soon as practicable when eCos starts up. One would choose -# to disable this if the data cache cannot safely be turned on, -# such as a case where the cache(s) require additional platform -# specific setup. -# -cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# DATA cache mode on startup -# This option controls the mode the cache will be set to -# when enabled on startup. -# -cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value COPYBACK - # value_source default - # Default value: COPYBACK - # Legal values: "COPYBACK" "WRITETHRU" -}; - -# < -# Enable INSTRUCTION cache on startup -# Enabling this option will cause the instruction cache to be enabled -# as soon as practicable when eCos starts up. One would choose -# to disable this if the instruction cache cannot safely be turned on, -# such as a case where the cache(s) require additional platform -# specific setup. -# -cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Source-level debugging support -# If the source level debugger gdb is to be used for debugging -# application code then it may be necessary to configure in support -# for this in the HAL. -# -cdl_component CYGPKG_HAL_DEBUG { - # There is no associated value. -}; - -# > -# Support for GDB stubs -# The HAL implements GDB stubs for the target. -# -cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS -}; - -# Include GDB stubs in HAL -# This option causes a set of GDB stubs to be included into the -# system. On some target systems the GDB support will be -# provided by other means, for example by a ROM monitor. On -# other targets, especially when building a ROM-booting system, -# the necessary support has to go into the target library -# itself. When GDB stubs are include in a configuration, HAL -# serial drivers must also be included. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS - # CYGINT_HAL_DEBUG_GDB_STUBS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 0 - # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0 - # --> 1 - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGBLD_BUILD_COMMON_GDB_STUBS - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGPKG_HAL_GDB_FILEIO - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS - # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS -}; - -# Support for external break support in GDB stubs -# The HAL implements external break (or asynchronous interrupt) -# in the GDB stubs for the target. -# -cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK -}; - -# Include GDB external break support for stubs -# This option causes the GDB stub to add a serial interrupt handler -# which will listen for GDB break packets. This lets you stop the -# target asynchronously when using GDB, usually by hitting Control+C -# or pressing the STOP button. This option differs from -# CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when -# GDB stubs are present. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK - # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # option CYGBLD_BUILD_REDBOOT_WITH_GDB - # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT -}; - -# Platform does not support CTRLC -# -cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 -}; - -# Include GDB external break support when no stubs -# This option adds an interrupt handler for the GDB serial line -# which will listen for GDB break packets. This lets you stop the -# target asynchronously when using GDB, usually by hitting Control+C -# or pressing the STOP button. This option differs from -# CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB -# stubs are NOT present. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT { - # This option is not active - # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 - # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 - # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # component CYGBLD_BUILD_REDBOOT - # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT -}; - -# Include GDB multi-threading debug support -# This option enables some extra HAL code which is needed -# to support multi-threaded source level debugging. -# -cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT { - # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # CYGSEM_HAL_ROM_MONITOR == 1 - # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # option CYGBLD_BUILD_REDBOOT_WITH_THREADS - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT -}; - -# Number of times to retry sending a $O packet -# This option controls the number of attempts that eCos programs -# will make to send a $O packet to a host GDB process. If it is -# set non-zero, then the target process will attempt to resend the -# $O packet data up to this number of retries. Caution: use of -# this option is not recommended as it can thoroughly confuse the -# host GDB process. -# -cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Timeout period for GDB packets -# This option controls the time (in milliseconds) that eCos programs -# will wait for a response when sending packets to a host GDB process. -# If this time elapses, then the packet will be resent, up to some -# maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES). -# -cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 500 - # value_source default - # Default value: 500 -}; - -# Location of CRC32 table -# The stubs use a 1 kilobyte CRC table that can either be pregenerated -# and placed in ROM, or generated at runtime in RAM. Depending on -# your memory constraints, one of these options may be better. -# -cdl_option CYGDBG_HAL_CRCTABLE_LOCATION { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value RAM - # value_source default - # Default value: RAM - # Legal values: "ROM" "RAM" -}; - -# < -# ROM monitor support -# Support for ROM monitors can be built in to your application. -# It may also be relevant to build your application as a ROM monitor -# itself. Such options are contained here if relevant for your chosen -# platform. The options and ROM monitors available to choose are -# platform-dependent. -# -cdl_component CYGPKG_HAL_ROM_MONITOR { - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Target has virtual vector support -# -cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT -}; - -# Target supports baud rate control via vectors -# Whether this target supports the __COMMCTL_GETBAUD -# and __COMMCTL_SETBAUD virtual vector comm control operations. -# -cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT { - # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE - # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT -}; - -# Enable use of virtual vector calling interface -# Virtual vector support allows the HAL to let the ROM -# monitor handle certain operations. The virtual vector table -# defines a calling interface between applications running in -# RAM and the ROM monitor. -# -cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT { - # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # package CYGPKG_DEVS_ETH_PHY - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT -}; - -# > -# Inherit console settings from ROM monitor -# When this option is set, the application will inherit -# the console as set up by the ROM monitor. This means -# that the application will use whatever channel and -# mangling style was used by the ROM monitor when -# the application was launched. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE { - # This option is not active - # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 0 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN -}; - -# Debug channel is configurable -# This option is a configuration hint - it is enabled -# when the HAL initialization code will make use -# of the debug channel configuration option. -# -cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE { - # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL - # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE -}; - -# Console channel is configurable -# This option is a configuration hint - it is enabled -# when the HAL initialization code will make use -# of the console channel configuration option. -# -cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE { - # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0 - # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE -}; - -# Initialize whole of virtual vector table -# This option will cause the whole of the virtual -# vector table to be initialized with dummy values on -# startup. When this option is enabled, all the -# options below must also be enabled - or the -# table would be empty when the application -# launches. -# On targets where older ROM monitors without -# virtual vector support may still be in use, it is -# necessary for RAM applictions to initialize the -# table (since all HAL diagnostics and debug IO -# happens via the table). -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR - # CYG_HAL_STARTUP == ROMRAM - # CYGSEM_HAL_USE_ROM_MONITOR == 0 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS -}; - -# Claim virtual vector table entries by default -# By default most virtual vectors will be claimed by -# RAM startup configurations, meaning that the RAM -# application will provide the services. The -# exception is COMMS support (HAL -# diagnostics/debugging IO) which is left in the -# control of the ROM monitor. -# The reasoning behind this is to get as much of the -# code exercised during regular development so it -# is known to be working the few times a new ROM -# monitor or a ROM production configuration is used -# - COMMS are excluded only by necessity in order to -# avoid breaking an existing debugger connections -# (there may be ways around this). -# For production RAM configurations this option can -# be switched off, causing the appliction to rely on -# the ROM monitor for these services, thus -# saving some space. -# Individual vectors may also be left unclaimed, -# controlled by the below options (meaning that the -# associated service provided by the ROM monitor -# will be used). -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT { - # This option is not active - # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA - # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT -}; - -# Claim reset virtual vectors -# This option will cause the reset and kill_by_reset -# virtual vectors to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET -}; - -# Claim version virtual vectors -# This option will cause the version -# virtual vectors to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # --> 1 -}; - -# Claim delay_us virtual vector -# This option will cause the delay_us -# virtual vector to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US -}; - -# Claim cache virtual vectors -# This option will cause the cache virtual vectors -# to be claimed. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE -}; - -# Claim data virtual vectors -# This option will cause the data virtual vectors -# to be claimed. At present there is only one, used -# by the RedBoot ethernet driver to share diag output. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA -}; - -# Claim comms virtual vectors -# This option will cause the communication tables -# that are part of the virtual vectors mechanism to -# be claimed. Note that doing this may cause an -# existing ROM monitor communication connection to -# be closed. For this reason, the option is disabled -# per default for normal application -# configurations. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1 - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE - # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS -}; - -# Do diagnostic IO via virtual vector table -# All HAL IO happens via the virtual vector table / comm -# tables when those tables are supported by the HAL. -# If so desired, the low-level IO functions can -# still be provided by the RAM application by -# enabling the CLAIM_COMMS option. -# -cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG { - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS -}; - -# < -# Behave as a ROM monitor -# Enable this option if this program is to be used as a ROM monitor, -# i.e. applications will be loaded into RAM on the TX53 module, and this -# ROM monitor may process exceptions or interrupts generated from the -# application. This enables features such as utilizing a separate -# interrupt stack when exceptions are generated. -# -cdl_option CYGSEM_HAL_ROM_MONITOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # CYG_HAL_STARTUP == ROMRAM - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) - # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # option CYGPRI_REDBOOT_ROM_MONITOR - # Requires: CYGSEM_HAL_ROM_MONITOR -}; - -# Work with a ROM monitor -# Support can be enabled for different varieties of ROM monitor. -# This support changes various eCos semantics such as the encoding -# of diagnostic output, or the overriding of hardware interrupt -# vectors. -# Firstly there is "Generic" support which prevents the HAL -# from overriding the hardware vectors that it does not use, to -# instead allow an installed ROM monitor to handle them. This is -# the most basic support which is likely to be common to most -# implementations of ROM monitor. -# "GDB_stubs" provides support when GDB stubs are included in -# the ROM monitor or boot ROM. -# -cdl_option CYGSEM_HAL_USE_ROM_MONITOR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 - # CYG_HAL_STARTUP == ROMRAM - # --> 0 0 - # Legal values: "Generic" "GDB_stubs" - # Requires: CYG_HAL_STARTUP == "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR - # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE - # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR -}; - -# < -# Platform defined I/O channels. -# Platforms which provide additional I/O channels can implement -# this interface, indicating that the function plf_if_init() -# needs to be called. -# -cdl_interface CYGINT_HAL_PLF_IF_INIT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Platform IDE I/O support. -# Platforms which provide IDE controllers can implement -# this interface, indicating that IDE I/O macros are -# available. -# -cdl_interface CYGINT_HAL_PLF_IF_IDE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_DISK_IDE - # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0 -}; - -# File I/O operations via GDB -# This option enables support for various file I/O -# operations using the GDB remote protocol to communicate -# with GDB. The operations are then performed on the -# debugging host by proxy. These operations are only -# currently available by using a system call interface -# to RedBoot. This may change in the future. -# -cdl_option CYGPKG_HAL_GDB_FILEIO { - # This option is not active - # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS - # CYGSEM_REDBOOT_BSP_SYSCALLS == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 -}; - -# Build Compiler sanity checking tests -# Enabling this option causes compiler tests to be built. -# -cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_HAL_TESTS - # Calculated: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") -}; - -# Common HAL tests -# This option specifies the set of tests for the common HAL. -# -cdl_component CYGPKG_HAL_TESTS { - # Calculated value: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") - # CYGINT_HAL_TESTS_NO_CACHES == 0 - # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0 - # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0 - # Flavor: data - # Current_value: tests/context tests/basic tests/cache tests/intr -}; - -# > -# Interface for cache presence -# Some architectures and/or platforms do not have caches. By -# implementing this interface, these can disable the various -# cache-related tests. -# -cdl_interface CYGINT_HAL_TESTS_NO_CACHES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value - # component CYGPKG_HAL_TESTS - # Calculated: "tests/context tests/basic" - # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "") - # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "") - # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "") -}; - -# < -# ARM architecture -# The ARM architecture HAL package provides generic -# support for this processor architecture. It is also -# necessary to select a specific target platform HAL -# package. -# -cdl_package CYGPKG_HAL_ARM { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG - # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED - # ActiveIf: CYGPKG_HAL_ARM -}; - -# > -# The CPU architecture supports THUMB mode -# -cdl_interface CYGINT_HAL_ARM_THUMB_ARCH { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_THUMB - # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0 -}; - -# Enable Thumb instruction set -# Enable use of the Thumb instruction set. -# -cdl_option CYGHWR_THUMB { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # CYGINT_HAL_ARM_THUMB_ARCH == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK - # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) -}; - -# Enable Thumb interworking compiler option -# This option controls the use of -mthumb-interwork in the -# compiler flags. It defaults enabled in Thumb or ROM monitor -# configurations, but can be overridden for reduced memory -# footprint where interworking is not a requirement. -# -cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0 - # CYGINT_HAL_ARM_THUMB_ARCH == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR) - # CYGHWR_THUMB == 0 - # CYGSEM_HAL_ROM_MONITOR == 1 - # --> 1 -}; - -# The platform and architecture supports Big Endian operation -# -cdl_interface CYGINT_HAL_ARM_BIGENDIAN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_BIGENDIAN - # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0 -}; - -# Use big-endian mode -# Use the CPU in big-endian mode. -# -cdl_option CYGHWR_HAL_ARM_BIGENDIAN { - # This option is not active - # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0 - # CYGINT_HAL_ARM_BIGENDIAN == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# The platform uses a processor with an ARM7 core -# -cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with an ARM9 core -# -cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 { - # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with a StrongARM core -# -cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# The platform uses a processor with a XScale core -# -cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_HAL_ARM_CPU_FAMILY - # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # option CYGHWR_HAL_ARM_CPU_FAMILY - # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" -}; - -# ARM CPU family -# It is possible to optimize code for different -# ARM CPU families. This option selects which CPU to -# optimize for on boards that support multiple CPU types. -# -cdl_option CYGHWR_HAL_ARM_CPU_FAMILY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value ARM9 - # value_source default - # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : - # "unknown" - # CYGINT_HAL_ARM_ARCH_ARM7 == 0 - # CYGINT_HAL_ARM_ARCH_ARM9 == 1 - # CYGINT_HAL_ARM_ARCH_STRONGARM == 0 - # CYGINT_HAL_ARM_ARCH_XSCALE == 0 - # --> ARM9 - # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : "" - # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : "" - # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : "" - # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : "" - # "" - # CYGINT_HAL_ARM_ARCH_ARM7 == 0 - # CYGINT_HAL_ARM_ARCH_ARM9 == 1 - # CYGINT_HAL_ARM_ARCH_STRONGARM == 0 - # CYGINT_HAL_ARM_ARCH_XSCALE == 0 -}; - -# Provide diagnostic dump for exceptions -# Print messages about hardware exceptions, including -# raw exception frame dump and register contents. -# -cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 1 -}; - -# Process all exceptions with the eCos application -# Normal RAM-based programs which do not include GDB stubs -# defer processing of the illegal instruction exception to GDB. -# Setting this options allows the program to explicitly handle -# the illegal instruction exception itself. Note: this will -# prevent the use of GDB to debug the application as breakpoints -# will no longer work. -# -cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Support GDB thread operations via ICE/Multi-ICE -# Allow GDB to get thread information via the ICE/Multi-ICE -# connection. -# -cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1 - # --> 1 - # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0 - # --> 0 -}; - -# Support for 'gprof' callbacks -# The ARM HAL provides the macro for 'gprof' callbacks from RedBoot -# to acquire the interrupt-context PC and SP, when this option is -# active. -# -cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT { - # This option is not active - # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS - # CYGSEM_REDBOOT_BSP_SYSCALLS == 0 - # --> 0 - # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0 - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 0 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Accept exceptions and irq's occurring in user mode -# For standalone Redboot based programs running in user mode. -# -cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Preserve svc spsr before returning to svc mode -# This option secures exception and breakpoint processing -# triggered during execution of application specific SWI -# handlers. -# -cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Linker script -# -cdl_option CYGBLD_LINKER_SCRIPT { - # Calculated value: "src/arm.ld" - # Flavor: data - # Current_value: src/arm.ld -}; - -# Implementations of hal_arm_mem_real_region_top() -# -cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Freescale SoC architecture -# This HAL variant package provides generic -# support for the Freescale SoC. It is also -# necessary to select a specific target platform HAL -# package. -# -cdl_package CYGPKG_HAL_ARM_MX53 { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK - # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53 -}; - -# > -# Processor clock rate -# The processor can run at various frequencies. -# These values are expressed in KHz. Note that there are -# several steppings of the rate to run at different -# maximum frequencies. Check the specs to make sure that your -# particular processor can run at the rate you select here. -# -cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK { - # This option is not active - # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" - # CYG_HAL_STARTUP == ROMRAM - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 150000 - # value_source default - # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ? - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000 - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0 - # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0 - # --> 150000 - # Legal values: 150000 200000 -}; - -# Real-time clock constants -# -cdl_component CYGNUM_HAL_RTC_CONSTANTS { - # There is no associated value. -}; - -# > -# Real-time clock numerator -# -cdl_option CYGNUM_HAL_RTC_NUMERATOR { - # Calculated value: 1000000000 - # Flavor: data - # Current_value: 1000000000 -}; - -# Real-time clock denominator -# This option selects the heartbeat rate for the real-time clock. -# The rate is specified in ticks per second. Change this value -# with caution - too high and your system will become saturated -# just handling clock interrupts, too low and some operations -# such as thread scheduling may become sluggish. -# -cdl_option CYGNUM_HAL_RTC_DENOMINATOR { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 100 - # value_source default - # Default value: 100 - - # The following properties are affected by this value - # option CYGNUM_HAL_RTC_PERIOD - # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR) -}; - -# Real-time clock period -# -cdl_option CYGNUM_HAL_RTC_PERIOD { - # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR) - # CYGNUM_HAL_RTC_DENOMINATOR == 100 - # Flavor: data - # Current_value: 36864 -}; - -# < -# UART1 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART1 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART2 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART2 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART3 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART3 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART4 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART4 { - # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value -}; - -# UART5 available as diagnostic/debug channel -# The chip has multiple serial channels which may be -# used for different things on different platforms. This -# interface allows a platform to indicate that the specified -# serial port can be used as a diagnostic and/or debug channel. -# -cdl_interface CYGHWR_HAL_ARM_SOC_UART5 { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# Ka-Ro TX53 module -# This HAL platform package provides generic -# support for the Ka-Ro electronics TX53 module. -# -cdl_package CYGPKG_HAL_ARM_TX53KARO { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - # Requires: CYGBLD_BUILD_REDBOOT == 1 - # CYGBLD_BUILD_REDBOOT == 1 - # --> 1 -}; - -# > -# Startup type -# The only startup type allowed is ROMRAM, since this will allow -# the program to exist in ROM, but be copied to RAM during startup -# which is required to boot from NAND flash. -# -cdl_component CYG_HAL_STARTUP { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value ROMRAM - # value_source default - # Default value: ROMRAM - # Legal values: "ROMRAM" "RAM" - - # The following properties are affected by this value - # option CYGSEM_HAL_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGSEM_HAL_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGSEM_HAL_USE_ROM_MONITOR - # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 - # option CYGSEM_HAL_USE_ROM_MONITOR - # Requires: CYG_HAL_STARTUP == "RAM" - # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK - # ActiveIf: CYG_HAL_STARTUP == "ROM" - # option CYGSEM_HAL_INSTALL_MMU_TABLES - # DefaultValue: CYG_HAL_STARTUP != "RAM" - # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN - # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0 - # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE - # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR - # option CYGBLD_BUILD_REDBOOT_WITH_THREADS - # ActiveIf: CYG_HAL_STARTUP != "RAM" - # option CYGPRI_REDBOOT_ROM_MONITOR - # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # option CYGPRI_REDBOOT_ROM_MONITOR - # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" -}; - -# Diagnostic serial port baud rate -# This option selects the baud rate used for the console port. -# Note: this should match the value chosen for the GDB port if the -# console and GDB port are the same. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 115200 - # value_source default - # Default value: 115200 - # Legal values: 9600 19200 38400 57600 115200 -}; - -# GDB serial port baud rate -# This option selects the baud rate used for the GDB port. -# Note: this should match the value chosen for the console port if the -# console and GDB port are the same. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 115200 - # value_source default - # Default value: 115200 - # Legal values: 9600 19200 38400 57600 115200 -}; - -# Number of communication channels on the TX53 -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS { - # Calculated value: 5 - # Flavor: data - # Current_value: 5 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 -}; - -# Debug serial port -# The TX53 provides access to five serial ports. This option -# chooses which port will be used to connect to a host -# running GDB. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL { - # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE - # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5 -}; - -# Default console channel. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT { - # Calculated value: 0 - # Flavor: data - # Current_value: 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5 - - # The following properties are affected by this value - # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL - # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT -}; - -# Console serial port -# The TX53 provides access to three serial ports. This option -# chooses which port will be used for console output. -# -cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL { - # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE - # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT - # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0 - # --> 0 - # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1 - # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5 -}; - -# Ka-Ro electronics TX53 module build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS { - # There is no associated value. - # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 -}; - -# > -# SDRAM size -# This option specifies the SDRAM size of the TX53 module. -# -cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE { - # Flavor: data - user_value 0x40000000 - # value_source user - # Default value: 0x20000000 - # Legal values: 0x40000000 0x20000000 -}; - -# SDRAM clock -# This option specifies the SDRAM clock im MHz of the TX53 module. -# -cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_CLK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 400 - # value_source default - # Default value: 400 - # Legal values: 216 266 333 400 -}; - -# CPU clock -# This option specifies the CPU clock in MHz of the TX51 module. -# -cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1000 - # value_source default - # Default value: 1000 - # Legal values: 800 1000 -}; - -# Enable low level debugging with LED -# This option enables low level debugging by blink codes -# of the LED on STK5. -# -cdl_option CYGOPT_HAL_ARM_TX53_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: false - # false (unknown) == 0 - # --> 0 -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the TX53 HAL. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the TX53 HAL. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Show a splash screen from the FIS partition: 'logo' -# When this option is enabled, RedBoot will look for a flash partition -# named 'logo' and display the contents of this partition as initial -# screen on the LCD -# -cdl_option CYGHWR_MX53_LCD_LOGO { - # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU - # CYGPKG_DEVS_IMX_IPU == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Memory layout -# -cdl_component CYGHWR_MEMORY_LAYOUT { - # Calculated value: "arm_tx53_romram" - # Flavor: data - # Current_value: arm_tx53_romram -}; - -# > -# Memory layout linker script fragment -# -cdl_option CYGHWR_MEMORY_LAYOUT_LDI { - # Calculated value: "" - # Flavor: data - # Current_value: -}; - -# Memory layout header file -# -cdl_option CYGHWR_MEMORY_LAYOUT_H { - # Calculated value: "" - # Flavor: data - # Current_value: -}; - -# < -# < -# < -# < -# < -# Infrastructure -# Common types and useful macros. -# Tracing and assertion facilities. -# Package startup options. -# -cdl_package CYGPKG_INFRA { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # package CYGPKG_HAL - # Requires: CYGPKG_INFRA - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGPKG_INFRA -}; - -# > -# Asserts & Tracing -# The eCos source code contains a significant amount of -# internal debugging support, in the form of assertions and -# tracing. -# Assertions check at runtime that various conditions are as -# expected; if not, execution is halted. -# Tracing takes the form of text messages that are output -# whenever certain events occur, or whenever functions are -# called or return. -# The most important property of these checks and messages is -# that they are not required for the program to run. -# It is prudent to develop software with assertions enabled, -# but disable them when making a product release, thus -# removing the overhead of that checking. -# It is possible to enable assertions and tracing -# independently. -# There are also options controlling the exact behaviour of -# the assertion and tracing facilities, thus giving users -# finer control over the code and data size requirements. -# -cdl_component CYGPKG_INFRA_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD - # ActiveIf: CYGPKG_INFRA_DEBUG -}; - -# > -# Use asserts -# If this option is defined, asserts in the code are tested. -# Assert functions (CYG_ASSERT()) are defined in -# 'include/cyg/infra/cyg_ass.h' within the 'install' tree. -# If it is not defined, these result in no additional -# object code and no checking of the asserted conditions. -# -cdl_component CYGDBG_USE_ASSERTS { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG - # Requires: CYGDBG_USE_ASSERTS - # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG - # DefaultValue: 0 != CYGDBG_USE_ASSERTS -}; - -# > -# Preconditions -# This option allows individual control of preconditions. -# A precondition is one type of assert, which it is -# useful to control separately from more general asserts. -# The function is CYG_PRECONDITION(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Postconditions -# This option allows individual control of postconditions. -# A postcondition is one type of assert, which it is -# useful to control separately from more general asserts. -# The function is CYG_POSTCONDITION(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Loop invariants -# This option allows individual control of loop invariants. -# A loop invariant is one type of assert, which it is -# useful to control separately from more general asserts, -# particularly since a loop invariant is typically evaluated -# a great many times when used correctly. -# The function is CYG_LOOP_INVARIANT(condition,msg). -# -cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use assert text -# All assertions within eCos contain a text message -# which should give some information about the condition -# being tested. -# These text messages will end up being embedded in the -# application image and hence there is a significant penalty -# in terms of image size. -# It is possible to suppress the use of these messages by -# disabling this option. -# This results in smaller code size, but there is less -# human-readable information if an assertion actually gets -# triggered. -# -cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE { - # This option is not active - # The parent CYGDBG_USE_ASSERTS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Use tracing -# If this option is defined, tracing operations -# result in output or logging, depending on other options. -# This may have adverse effects on performance, if the time -# taken to output message overwhelms the available CPU -# power or output bandwidth. -# Trace functions (CYG_TRACE()) are defined in -# 'include/cyg/infra/cyg_trac.h' within the 'install' tree. -# If it is not defined, these result in no additional -# object code and no trace information. -# -cdl_component CYGDBG_USE_TRACING { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0 - # --> 0 - - # The following properties are affected by this value - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT - # ActiveIf: CYGDBG_USE_TRACING - # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT - # ActiveIf: CYGDBG_USE_TRACING -}; - -# > -# Trace function reports -# This option allows individual control of -# function entry/exit tracing, independent of -# more general tracing output. -# This may be useful to remove clutter from a -# trace log. -# -cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS { - # This option is not active - # The parent CYGDBG_USE_TRACING is not active - # The parent CYGDBG_USE_TRACING is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use trace text -# All trace calls within eCos contain a text message -# which should give some information about the circumstances. -# These text messages will end up being embedded in the -# application image and hence there is a significant penalty -# in terms of image size. -# It is possible to suppress the use of these messages by -# disabling this option. -# This results in smaller code size, but there is less -# human-readable information available in the trace output, -# possibly only filenames and line numbers. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE { - # This option is not active - # The parent CYGDBG_USE_TRACING is not active - # The parent CYGDBG_USE_TRACING is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Trace output implementations -# -cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL { - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled - # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # component CYGDBG_USE_ASSERTS - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL - # component CYGDBG_USE_TRACING - # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL -}; - -# Null output -# A null output module which is useful when -# debugging interactively; the output routines -# can be breakpointed rather than have them actually -# 'print' something. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Simple output -# An output module which produces simple output -# from tracing and assertion events. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Fancy output -# An output module which produces fancy output -# from tracing and assertion events. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Buffered tracing -# An output module which buffers output -# from tracing and assertion events. The stored -# messages are output when an assert fires, or -# CYG_TRACE_PRINT() (defined in ) -# is called. -# Of course, there will only be stored messages -# if tracing per se (CYGDBG_USE_TRACING) -# is enabled above. -# -cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Trace buffer size -# The size of the trace buffer. This counts the number -# of trace records stored. When the buffer fills it -# either wraps, stops recording, or generates output. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 - # Legal values: 5 to 65535 -}; - -# Wrap trace buffer when full -# When the trace buffer has filled with records it -# starts again at the beginning. Hence only the last -# CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will -# be recorded. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Halt trace buffer when full -# When the trace buffer has filled with records it -# stops recording. Hence only the first -# CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will -# be recorded. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Print trace buffer when full -# When the trace buffer has filled with records it -# prints the contents of the buffer. The buffer is then -# emptied and the system continues. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Print trace buffer on assert fail -# When an assertion fails the trace buffer will be -# printed to the default diagnostic device. -# -cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT { - # This option is not active - # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active - # ActiveIf constraint: CYGDBG_USE_TRACING - # CYGDBG_USE_TRACING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Use function names -# All trace and assert calls within eCos contain a -# reference to the builtin macro '__PRETTY_FUNCTION__', -# which evaluates to a string containing -# the name of the current function. -# This is useful when reading a trace log. -# It is possible to suppress the use of the function name -# by disabling this option. -# This results in smaller code size, but there is less -# human-readable information available in the trace output, -# possibly only filenames and line numbers. -# -cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO { - # This option is not active - # The parent CYGPKG_INFRA_DEBUG is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Startup options -# Some packages require a startup routine to be called. -# This can be carried out by application code, by supplying -# a routine called cyg_package_start() which calls the -# appropriate package startup routine(s). -# Alternatively, this routine can be constructed automatically -# and configured to call the startup routines of your choice. -# -cdl_component CYGPKG_INFRA_STARTUP { - # There is no associated value. -}; - -# > -# Start uITRON subsystem -# Generate a call to initialize the -# uITRON compatibility subsystem -# within the system version of cyg_package_start(). -# This enables compatibility with uITRON. -# You must configure uITRON with the correct tasks before -# starting the uItron subsystem. -# If this is disabled, and you want to use uITRON, -# you must call cyg_uitron_start() from your own -# cyg_package_start() or cyg_userstart(). -# -cdl_option CYGSEM_START_UITRON_COMPATIBILITY { - # This option is not active - # ActiveIf constraint: CYGPKG_UITRON - # CYGPKG_UITRON (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGPKG_UITRON - # CYGPKG_UITRON (unknown) == 0 - # --> 0 -}; - -# < -# Smaller slower memcpy() -# Enabling this option causes the implementation of -# the standard memcpy() routine to reduce code -# size at the expense of execution speed. This -# option is automatically enabled with the use of -# the -Os option to the compiler. Also note that -# the compiler will try to use its own builtin -# version of memcpy() if possible, ignoring the -# implementation in this package, unless given -# the -fno-builtin compiler option. -# -cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Smaller slower memset() -# Enabling this option causes the implementation of -# the standard memset() routine to reduce code -# size at the expense of execution speed. This -# option is automatically enabled with the use of -# the -Os option to the compiler. Also note that -# the compiler will try to use its own builtin -# version of memset() if possible, ignoring the -# implementation in this package, unless given -# the -fno-builtin compiler option. -# -cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide empty C++ delete functions -# To deal with virtual destructors, where the correct delete() -# function must be called for the derived class in question, the -# underlying delete is called when needed, from destructors. This -# is regardless of whether the destructor is called by delete itself. -# So there is a reference to delete() from all destructors. The -# default builtin delete() attempts to call free() if there is -# one defined. So, if you have destructors, and you have free(), -# as in malloc() and free(), any destructor counts as a reference -# to free(). So the dynamic memory allocation code is linked -# in regardless of whether it gets explicitly called. This -# increases code and data size needlessly. -# To defeat this undesirable behaviour, we define empty versions -# of delete and delete. But doing this prevents proper use -# of dynamic memory in C++ programs via C++'s new and delete -# operators. -# Therefore, this option is provided -# for explicitly disabling the provision of these empty functions, -# so that new and delete can be used, if that is what is required. -# -cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Threshold for valid number of delete calls -# Some users don't know about the empty delete function and then -# wonder why their C++ classes are leaking memory. If -# INFRA_DEBUG is enabled we keep a counter for the number of -# times delete is called. If it goes above this threshold we throw -# an assertion failure. This should point heavy users of -# delete in the right direction without upsetting those who want -# an empty delete function. -# -cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD { - # This option is not active - # ActiveIf constraint: CYGPKG_INFRA_DEBUG - # CYGPKG_INFRA_DEBUG == 0 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 100 - # value_source default - # Default value: 100 -}; - -# Provide dummy abort() function -# This option controls the inclusion of a dummy abort() function. -# Parts of the C and C++ compiler runtime systems contain references -# to abort(), particulary in the C++ exception handling code. It is -# not possible to eliminate these references, so this dummy function -# in included to satisfy them. It is not expected that this function -# will ever be called, so its current behaviour is to simply loop. -# -cdl_option CYGFUN_INFRA_DUMMY_ABORT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGINT_ISO_EXIT == 0 - # CYGINT_ISO_EXIT == 0 - # --> 1 - # Requires: !CYGINT_ISO_EXIT - # CYGINT_ISO_EXIT == 0 - # --> 1 -}; - -# Reset platform at end of test case execution -# If this option is set then test case programs will reset the platform -# when they terminate, as opposed to the default which is to just hang -# in a loop. -# -cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Provide dummy strlen() function -# This option controls the inclusion of a dummy strlen() function. -# Parts of the C and C++ compiler runtime systems contain references -# to strlen(), particulary in the C++ exception handling code. It is -# not possible to eliminate these references, so this dummy function -# in included to satisfy them. While it is not expected that this function -# will ever be called, it is functional but uses the simplest, smallest -# algorithm. There is a faster version of strlen() in the C library. -# -cdl_option CYGFUN_INFRA_DUMMY_STRLEN { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGINT_ISO_STRING_STRFUNCS == 0 - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 0 - # Requires: !CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 0 -}; - -# Make all compiler warnings show as errors -# Enabling this option will cause all compiler warnings to show -# as errors and bring the library build to a halt. This is used -# to ensure that the code base is warning free, and thus ensure -# that newly introduced warnings stand out and get fixed before -# they show up as weird run-time behavior. -# -cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror") - # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # --> 1 - - # The following properties are affected by this value - # option CYGBLD_GLOBAL_CFLAGS - # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS -}; - -# Make compiler and assembler communicate by pipe -# Enabling this option will cause the compiler to feed the -# assembly output the the assembler via a pipe instead of -# via a temporary file. This normally reduces the build -# time. -# -cdl_option CYGBLD_INFRA_CFLAGS_PIPE { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 - # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe") - # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" - # --> 1 -}; - -# Infra build options -# Package specific build options including control over -# compiler flags used only in building this package. -# -cdl_component CYGPKG_INFRA_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are used -# in addition to the set of global flags. -# -cdl_option CYGPKG_INFRA_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# Suppressed linker flags -# This option modifies the set of linker flags for -# building the eCos infra package tests. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wl,--gc-sections - # value_source default - # Default value: -Wl,--gc-sections -}; - -# Additional linker flags -# This option modifies the set of linker flags for -# building the eCos infra package tests. These flags are added to -# the set of global flags if present. -# -cdl_option CYGPKG_INFRA_LDFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wl,--fatal-warnings - # value_source default - # Default value: -Wl,--fatal-warnings -}; - -# Infra package tests -# -cdl_component CYGPKG_INFRA_TESTS { - # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2" - # Flavor: data - # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2 -}; - -# > -# Number of times a test runs -# This option controls the number of times tests will execute their -# basic function. Not all tests will honor this setting, but those -# that do will execute the test N times before terminating. A value -# less than 0 indicates to run forever. -# -cdl_option CYGNUM_TESTS_RUN_COUNT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# < -# < -# Redboot ROM monitor -# doc: ref/redboot.html -# This package supports the Redboot [stand-alone debug monitor] -# using eCos as the underlying board support mechanism. -# -cdl_package CYGPKG_REDBOOT { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 - # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 - # --> 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_ARM_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # component CYGPKG_REDBOOT_HAL_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS - # ActiveIf: CYGPKG_REDBOOT - # option CYGSEM_IO_ETH_DRIVERS_WARN - # ActiveIf: CYGPKG_REDBOOT -}; - -# > -# Include support for ELF file format -# -cdl_component CYGSEM_REDBOOT_ELF { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Use the virtual address in the ELF headers -# The ELF headers contain both a virtual and a physical address -# for where code/data should be loaded. By default the physical -# address is used but sometimes it is necassary to use the -# virtual address because of bugy toolchains -# -cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Methods of loading images using redboot -# -cdl_interface CYGINT_REDBOOT_LOAD_METHOD { - # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled - # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 2 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_REDBOOT_LOAD_METHOD -}; - -# Build Redboot ROM ELF image -# This option enables the building of the Redboot ELF image. -# The image may require further relocation or symbol -# stripping before being converted to a binary image. -# This is handled by a rule in the target CDL. -# -cdl_component CYGBLD_BUILD_REDBOOT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYGPKG_INFRA - # CYGPKG_INFRA == current - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT - # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0 - # --> 1 - # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM - # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0 - # --> 1 - # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT - # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - # Requires: CYGINT_REDBOOT_LOAD_METHOD - # CYGINT_REDBOOT_LOAD_METHOD == 2 - # --> 1 - - # The following properties are affected by this value - # package CYGPKG_HAL_ARM_TX53KARO - # Requires: CYGBLD_BUILD_REDBOOT == 1 - # option CYGBLD_BUILD_REDBOOT_BIN - # ActiveIf: CYGBLD_BUILD_REDBOOT -}; - -# > -# Include GDB support in RedBoot -# RedBoot normally includes support for the GDB debugging -# protocols. This option allows this to be disabled which -# may yield a substantial savings in terms of code and memory -# usage by RedBoot. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB { - # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS - # CYGINT_HAL_DEBUG_GDB_STUBS == 1 - # --> 1 - - # Flavor: bool - user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source user - # Default value: 1 - # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS - # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0 - # --> 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0 - # --> 0 -}; - -# Threads debugging support -# Enabling this option will include special code in the -# GDB stubs to support debugging of threaded programs. In -# the case of eCos programs, this support allows GDB to -# have complete access to the eCos threads in the -# program. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS { - # ActiveIf constraint: CYG_HAL_STARTUP != "RAM" - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT - # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1 - # --> 1 -}; - -# Customized version string -# Use this option to define a customized version "string" for -# RedBoot. Note: this value is only cosmetic, displayed by the -# "version" command, but is useful for providing site specific -# information about the RedBoot configuration. -# -cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 "Ka-Ro 2010-01-06" - # value_source inferred - # Default value: 0 0 -}; - -# Enable command line editing -# If this option is non-zero, RedBoot will remember the -# last N command lines. These lines may be reused. -# Enabling this history will also enable rudimentary -# editting of the lines themselves. -# -cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 16 - # value_source default - # Default value: 16 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES - # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0 - # option CYGBLD_REDBOOT_CMD_LINE_HISTORY - # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 -}; - -# Enable command line editing using ANSI arrows, etc -# If this option is enabled, RedBoot will accept standard ANSI key -# sequences for cursor movement (along with the emacs style keys). -# -cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES { - # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0 - # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Enable history command and expansion -# Enabling this option will allow RedBoot to provide a -# history command to list previous commands. Also enables -# history expansion via '!' character similar to bash -# shell. -# -cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 - # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16 - # --> 1 -}; - -# Number of unique RAM segments on platform -# Change this option to be the number of memory segments which are -# supported by the platform. If the value is greater than 1, then -# a platform specific function must provide information about the -# additional segments. -# -cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include support gzip/zlib decompression -# -cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB { - # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB - # CYGPKG_COMPRESS_ZLIB == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS -}; - -# > -# Size of zlib decompression buffer -# This is the size of the buffer filled with incoming data -# during load before calls are made to the decompressor -# function. For ethernet downloads this can be made bigger -# (at the cost of memory), but for serial downloads on slow -# processors it may be necessary to reduce the size to -# avoid serial overruns. zlib appears to bail out if less -# than five bytes are available initially so this is the -# minimum. -# -cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 64 - # value_source default - # Default value: 64 - # Legal values: 5 to 256 -}; - -# Support compression of Flash images -# This CDL indicates whether flash images can -# be decompressed from gzip/zlib format into RAM. -# -cdl_option CYGPRI_REDBOOT_ZLIB_FLASH { - # ActiveIf constraint: CYGPKG_REDBOOT_FLASH - # CYGPKG_REDBOOT_FLASH == 1 - # --> 1 - # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Include GZIP uncompress command -# Enable this option to include a 'gunzip' command -# to uncompress GZIP compressed data. -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Turn on CYGPRI_REDBOOT_ZLIB_FLASH -# Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen -# -cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE -}; - -# < -# Include support for xyzModem downloads -# doc: ref/download-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGPKG_REDBOOT_CFLAGS_ADD - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the eCos infra package. These flags are used -# in addition to the set of global flags. -# -cdl_option CYGPKG_REDBOOT_CFLAGS_ADD { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM - # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1 - # --> 1 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-inline - # value_source default - # Default value: -Wno-inline -}; - -# Allow the load-command write into Flash. -# Write images direct to Flash via the load command. -# We assume anything which is invalid RAM is flash, hence -# the requires statement -# -cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH { - # ActiveIf constraint: CYGPKG_REDBOOT_FLASH - # CYGPKG_REDBOOT_FLASH == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS - # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1 - # --> 1 -}; - -# Include MS Windows CE support -# doc: ref/wince.html -# This option enables MS Windows CE EShell support -# and Windows CE .BIN images support -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT { - # Flavor: bool - user_value 1 - # value_source user - # Default value: 0 -}; - -# Include support for MXC USB downloads -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include support for i.MX USB OTG downloads -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include POSIX checksum command -# doc: ref/cksum-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory fill command -# doc: ref/mfill-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory compare command -# doc: ref/mcmp-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory copy command -# doc: ref/mcopy-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include memory dump command -# doc: ref/dump-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include cache command -# doc: ref/cache-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Include exec command -# doc: ref/exec-command.html -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_ARM_LINUX_EXEC - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC -}; - -# Include I/O Memory commands 'iopeek' and 'iopoke' -# -cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Granularity of timer/ticks -# This option controls the granularity of the timers. -# Faster CPUs can afford higher granularity (lower values) -# which should give higher network performance since the stack -# is purely polled. -# -cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 250 - # value_source default - # Default value: 250 - # Legal values: 10 25 50 100 250 500 1000 -}; - -# Redboot Networking -# This option includes networking support in RedBoot. -# -cdl_component CYGPKG_REDBOOT_NETWORKING { - # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS - # CYGPKG_IO_ETH_DRIVERS == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS - # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING -}; - -# > -# Print net debug information -# This option is overriden by the configuration stored -# in flash. -# -cdl_option CYGDBG_REDBOOT_NET_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Support TFTP for download -# This option enables the use of the TFTP protocol for -# download -# -cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Support HTTP for download -# This option enables the use of the HTTP protocol for -# download -# -cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# Default IP address -# This IP address is the default used by RedBoot if -# a BOOTP/DHCP server does not respond. The numbers -# should be separated by *commas*, and not dots. If -# an IP address is configured into the Flash -# configuration, that will be used in preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# > -# Do not try to use BOOTP -# By default Redboot tries to use BOOTP to get an IP -# address. If there's no BOOTP server on your network -# use this option to avoid to wait until the -# timeout. This option is overriden by the -# configuration stored in flash. -# -cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP { - # This option is not active - # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Default bootp server -# This IP address is the default server -# address used by RedBoot if a BOOTP/DHCP -# server does not respond. The numbers should -# be separated by *commas*, and not dots. If -# an IP address is configured into the Flash -# configuration, that will be used in -# preference. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR { - # This option is not active - # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# < -# Use DHCP to get IP information -# Use DHCP protocol to obtain pertinent IP addresses, such -# as the client, server, gateway, etc. -# -cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY - # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP -}; - -# Use a gateway for non-local IP traffic -# Enabling this option will allow the RedBoot networking -# stack to use a [single] gateway to reach a non-local -# IP address. If disabled, RedBoot will only be able to -# reach nodes on the same subnet. -# -cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP - # CYGSEM_REDBOOT_NETWORKING_DHCP == 1 - # --> 1 -}; - -# > -# Default gateway IP address -# This IP address is the default used by RedBoot -# if a BOOTP/DHCP server does not respond. The -# numbers should be separated by *commas*, and -# not dots. If an IP address is configured into -# the Flash configuration, that will be used in -# preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# Default IP address mask -# This IP address mask is the default used by -# RedBoot if a BOOTP/DHCP server does not -# respond. The numbers should be separated by -# *commas*, and not dots. If an IP address is -# configured into the Flash configuration, that -# will be used in preference. -# -cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0" - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 0 -}; - -# < -# TCP port to listen for incoming connections -# RedBoot will 'listen' on this port for incoming TCP -# connections. This allows outside connections to be made -# to the platform, either for GDB or RedBoot commands. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 9000 - # value_source default - # Default value: 9000 -}; - -# Number of [network] packet buffers -# RedBoot may need to buffer network data to support -# various connections. This option allows control -# over the number of such buffered packets, and in -# turn, controls the amount of memory used by RedBoot -# (which is not available to user applications). -# Each packet buffer takes up about 1514 bytes. -# Note: there is little need to make this larger than -# the default. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 - # Legal values: 3 to 8 -}; - -# DNS support -# When this option is enabled, RedBoot will be built with -# support for DNS, allowing use of hostnames on the command -# line. -# -cdl_component CYGPKG_REDBOOT_NETWORKING_DNS { - # This option is not active - # ActiveIf constraint: CYGPKG_NS_DNS - # CYGPKG_NS_DNS (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: !CYGPKG_NS_DNS_BUILD - # CYGPKG_NS_DNS_BUILD (unknown) == 0 - # --> 1 -}; - -# > -# Default DNS IP -# This option sets the IP of the default DNS. The IP can be -# changed at runtime as well. -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0.0.0.0 - # value_source default - # Default value: 0.0.0.0 -}; - -# Timeout in DNS lookup -# This option sets the timeout used when looking up an -# address via the DNS. Default is 10 seconds. -# -cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # value_source default - # Default value: 10 -}; - -# Support the use of a domain name -# This option controls if Redboot supports domain -# names when performing DNS lookups -# -cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Default DNS domain -# This option sets the default DNS domain name. -# This value will be overwritten by the value in -# flash or a domain returned by DHCP -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Get DNS domain from Flash -# This option enables getting the domain name -# from the flash configuration. This can later be -# overwritten by a value learnt from DHCP -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Use DNS domain from DHCP -# This option enables the use of the domain name -# returned by DHCP. -# -cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# BOOTP/DHCP DNS domain buffer size -# This options sets the size of the static -# buffer used by BOOTP/DHCP to store the DNS -# domain name. The domain name will not be -# set if the buffer is too small to hold it. -# -cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE { - # This option is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active - # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 32 - # value_source default - # Default value: 32 -}; - -# < -# < -# Default network device driver -# This is the name of the default network device to use. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE { - # This option is not active - # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1 - # CYGHWR_NET_DRIVERS == 1 - # --> 0 - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"\"" - # value_source default - # Default value: "\"\"" -}; - -# Initialize only one net device -# This option tells RedBoot to stop initializing network -# devices when it finds the first device which is -# successfully initialized. The default behavior causes -# all network devices to be initialized. -# -cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE { - # This option is not active - # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1 - # CYGHWR_NET_DRIVERS == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Let RedBoot use any I/O channel for its console. -# If this option is enabled then RedBoot will attempt to use all -# defined serial I/O channels for its console device. Once input -# arrives at one of these channels then the console will use only -# that port. -# -cdl_option CYGPKG_REDBOOT_ANY_CONSOLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# Let RedBoot adjust the baud rate of the serial console. -# If this option is enabled then RedBoot will support commands -# to set and query the baud rate on the selected console. -# -cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE { - # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT - # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Run a platform specific startup function. -# If this option is enabled then RedBoot will execute a platform -# specific startup function before entering into its command line -# processing. This allows the platform to perform any special -# setups before RedBoot actually starts running. Note: the entire -# RedBoot environment will already be initialized at this point. -# -cdl_option CYGSEM_REDBOOT_PLF_STARTUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Run a platform specific ESA validation function. -# If this option is enabled then RedBoot will execute a platform -# specific function to validate an ethernet ESA. This would be -# useful if the address must conform to standards set by the -# hardware manufacturer, etc. -# -cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 - # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE - # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI - # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE -}; - -# Maximum command line length -# This option allows control over how long the CLI command line -# should be. This space will be allocated statically -# rather than from RedBoot's stack. -# -cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # The inferred value should not be edited directly. - inferred_value 1024 - # value_source inferred - # Default value: 256 -}; - -# Command processing idle timeout (ms) -# This option controls the timeout period before the -# command processing is considered 'idle'. Making this -# number smaller will cause idle processing to take place -# more often, etc. The default value of 10ms is a reasonable -# tradeoff between responsiveness and overhead. -# -cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # value_source default - # Default value: 10 -}; - -# Validate RAM addresses during load -# This option controls whether or not RedBoot will make -# sure that memory being used by the "load" command is -# in fact in user RAM. Leaving the option enabled makes -# for a safer environment, but this check may not be valid -# on all platforms, thus the ability to disable it. -# ** Disable this only with great care ** -# -cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGBLD_REDBOOT_LOAD_INTO_FLASH - # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS -}; - -# Allow RedBoot to support FLASH programming -# If this option is enabled then RedBoot will provide commands -# to manage images in FLASH memory. These images can be loaded -# into memory for execution or executed in place. -# -cdl_component CYGPKG_REDBOOT_FLASH { - # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE - # CYGHWR_IO_FLASH_DEVICE == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: CYGPKG_REDBOOT_FLASH - # option CYGBLD_REDBOOT_LOAD_INTO_FLASH - # ActiveIf: CYGPKG_REDBOOT_FLASH -}; - -# > -# Byte order used to store info in flash. -# This option controls the byte ordering used to store -# the FIS directory info and flash config info. -# -cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value NATURAL - # value_source default - # Default value: NATURAL - # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST" -}; - -# RedBoot Flash Image System support -# doc: ref/flash-image-system.html -# This option enables the Flash Image System commands -# and support within RedBoot. If disabled, simple Flash -# access commands such as "fis write" will still exist. -# This option would be disabled for targets that need simple -# FLASH manipulation, but do not have the need or space for -# complete image management. -# -cdl_option CYGOPT_REDBOOT_FIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_FIS_CONTENTS - # ActiveIf: CYGOPT_REDBOOT_FIS - # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER - # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS -}; - -# Max number of chunks of free space to manage -# If this option is defined then "fis free" will -# rely on the FIS directory to determine what space is -# free within the FLASH. This option controls the -# maximum number of free segment which can be handled -# (typically this number is small). If this option is -# not enabled, the the archaic behaviour of actually -# scanning the FLASH for erased sectors (unreliable) -# will be used to determine what's free and what's -# not. -# -cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 32 - # value_source default - # Default value: 1 32 -}; - -# Flash Image System default directory contents -# -cdl_component CYGPKG_REDBOOT_FIS_CONTENTS { - # ActiveIf constraint: CYGOPT_REDBOOT_FIS - # CYGOPT_REDBOOT_FIS == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# > -# Flash block containing the Directory -# Which block of flash should hold the directory -# information. Positive numbers are absolute block -# numbers. Negative block numbers count backwards -# from the last block. eg 2 means block 2, -2 -# means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -1 - # value_source default - # Default value: -1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK -}; - -# Redundant Flash Image System Directory Support -# This option enables the use of a redundant FIS -# directory within RedBoot. If enabled a flash block -# will be reserved for a second copy of the fis -# directory. Doing this allow for power failure safe -# updates of the directory by the application. -# -cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1 - # --> 0 -}; - -# > -# Flash block containing the backup Directory -# Which block of flash should hold the redundant -# directory information. Positive numbers are -# absolute block numbers. Negative block numbers -# count backwards from the last block. eg 2 means -# block 2, -2 means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK { - # This option is not active - # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -3 - # value_source default - # Default value: -3 - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK - # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0 - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK - # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK != - # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK -}; - -# < -# Pseudo-file to describe reserved area -# If an area of FLASH is reserved, it is informative to -# have a fis entry describing it. This option controls -# creation of such an entry by default in the fis init -# command. -# -cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE { - # This option is not active - # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# File to describe RedBoot boot image -# Normally a ROM-startup RedBoot image is first in the -# FLASH, and the system boots using that image. This -# option controls creation of an entry describing it in -# the fis init command. It might be disabled if a -# platform has an immutable boot image of its own, where -# we use a POST-startup RedBoot instead, which performs -# less board initialization. -# -cdl_option CYGOPT_REDBOOT_FIS_REDBOOT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_FIS_REDBOOT_POST - # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT - # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE - # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0 -}; - -# File to describe RedBoot POST-compatible image -# This option controls creation of an entry describing a -# POST-startup RedBoot image in the fis init command. -# Not all platforms support POST-startup. A platform -# might have both for testing purposes, where the -# eventual user would substitute their own POST code for -# the initial ROM-startup RedBoot, and then jump to the -# POST-compatible RedBoot immediately following. -# -cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT - # CYGOPT_REDBOOT_FIS_REDBOOT == 1 - # --> 0 -}; - -# > -# Offset of POST image from FLASH start -# This option specifies the offset for a POST image from -# the start of FLASH. If unset, then the fis entry -# describing the POST image will be placed where -# convenient. -# -cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET { - # This option is not active - # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET -}; - -# < -# File to describe RedBoot backup image -# This option controls creation of an entry describing a -# backup RedBoot image in the fis init command. -# Conventionally a RAM-startup RedBoot image is kept -# under this name for use in updating the ROM-based -# RedBoot that boots the board. -# -cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Include ARM SIB ID in FIS -# If set, this option will cause the last 5 words of -# the FIS to include the special ID needed for the -# flash to be recognized as a reserved area for RedBoot -# by an ARM BootRom monitor. -# -cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Size of FIS directory entry -# The FIS directory is limited to one single flash -# sector. If your flash has tiny sectors, you may wish -# to reduce this value in order to get more slots in -# the FIS directory. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # value_source default - # Default value: 256 -}; - -# Number of FIS directory entries -# The FIS directory normally occupies a single flash -# sector. Adjusting this value can allow for more than -# one flash sector to be used, which is useful if your -# sectors are very small. -# -cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 8 - # value_source default - # Default value: 8 -}; - -# Maximum RedBoot image size -# This option controls the maximum length reserved -# for the RedBoot boot image in the FIS table. -# This should be a multiple of the flash's erase -# block size. -# -cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00020000 - # The inferred value should not be edited directly. - inferred_value 0x00040000 - # value_source inferred - # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0 - # CYGOPT_REDBOOT_FIS_REDBOOT == 1 - # --> 0x00020000 -}; - -# Offset from start of FLASH to RedBoot boot image -# This option controls where the RedBoot boot image is -# located relative to the start of FLASH. -# -cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # --> 0 - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0 - # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET - # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # component CYGPKG_HAL_ARM_TX53_OPTIONS - # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 -}; - -# Size of reserved area at start of FLASH -# This option reserves an area at the start of -# FLASH where RedBoot will never interfere; it is -# expected that this area contains -# (non-RedBoot-based) POST code or some other boot -# monitor that executes before RedBoot. -# -cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGOPT_REDBOOT_FIS_RESERVED_BASE - # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE - # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET - # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET -}; - -# < -# Keep all RedBoot FLASH data blocks locked. -# When this option is enabled, RedBoot will keep configuration -# data and the FIS directory blocks implicitly locked. While -# this is somewhat safer, it does add overhead during updates. -# -cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL { - # This option is not active - # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 - # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use CRC checksums on FIS images. -# When this option is enabled, RedBoot will use CRC checksums -# when reading and writing flash images. -# -cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# ARM FLASH drivers support SIB flash block structure -# This interface is implemented by a flash driver -# to indicate that it supports the ARM SIB flash -# block structure -# -cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED { - # No options implement this inferface - # ActiveIf constraint: CYGPKG_HAL_ARM - # CYGPKG_HAL_ARM == current - # --> 1 - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGHWR_REDBOOT_ARM_FLASH_SIB - # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED -}; - -# Use ARM SIB flash block structure -# This option is used to interpret ARM Flash System -# information blocks. -# -cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB { - # This option is not active - # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED - # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Keep RedBoot configuration data in FLASH -# When this option is enabled, RedBoot will keep configuration -# data in a separate block of FLASH memory. This data will -# include such items as the node IP address or startup scripts. -# -cdl_component CYGSEM_REDBOOT_FLASH_CONFIG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: CYGPKG_IO_FLASH != 0 - # CYGPKG_IO_FLASH == current - # --> 1 - - # The following properties are affected by this value - # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0" - # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK - # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0" - # option CYGPKG_REDBOOT_NETWORKING_DNS_IP - # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG - # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN - # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG - # option CYGFUN_REDBOOT_BOOT_SCRIPT - # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG -}; - -# > -# Length of configuration data in FLASH -# This option is used to control the amount of memory and FLASH -# to be used for configuration options (persistent storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4096 - # value_source default - # Default value: 4096 -}; - -# Style of media used for persistent data storage -# Persistent data storage can either be held in 'norma' FLASH -# or some other device (represented by the 'EEPROM' choice). -# The different styles utilize different access methods. -# -cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value FLASH - # value_source default - # Default value: FLASH - # Legal values: "FLASH" "EEPROM" - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG - # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK - # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") -}; - -# Merged config data and FIS directory -# If this option is set, then the FIS directory and FLASH -# configuration database will be stored in the same physical -# FLASH block. -# -cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG { - # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # CYGOPT_REDBOOT_FIS == 1 - # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # component CYGOPT_REDBOOT_REDUNDANT_FIS - # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG -}; - -# Which block of flash to use -# Which block of flash should hold the configuration -# information. Positive numbers are absolute block numbers. -# Negative block numbers count backwards from the last block. -# eg 2 means block 2, -2 means the last but one block. -# -cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -2 - # value_source default - # Default value: -2 -}; - -# Support simple macros/aliases in FLASH -# This option is used to allow support for simple text-based -# macros (aliases). These aliases are kept in the FLASH -# configuration data (persistent storage). -# -cdl_option CYGSEM_REDBOOT_FLASH_ALIASES { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Length of strings in FLASH configuration data -# This option is used to control the amount of memory -# and FLASH to be used for string configuration -# options (persistent storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 128 - # value_source default - # Default value: 128 -}; - -# Length of configuration script(s) in FLASH -# This option is used to control the amount of memory and -# FLASH to be used for configuration options (persistent -# storage). -# -cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 512 - # The inferred value should not be edited directly. - inferred_value 2048 - # value_source inferred - # Default value: 512 -}; - -# Fallback to read-only FLASH configuration -# This option will cause the configuration information to -# revert to the readonly information stored in the FLASH. -# The option only takes effect after -# 1) the config_ok flag has been set to be true, -# indicating that at one time the copy in RAM was valid; -# and -# 2) the information in RAM has been verified to be invalid -# -cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") - # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH - # --> 1 -}; - -# < -# Allow RedBoot to support fileio -# If this option is enabled then RedBoot will provide commands -# to load files from fileio file systems such as JFFS2. -# -cdl_component CYGPKG_REDBOOT_FILEIO { - # This option is not active - # ActiveIf constraint: CYGPKG_IO_FILEIO - # CYGPKG_IO_FILEIO (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGNUM_REDBOOT_GETC_BUFFER - # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256 -}; - -# > -# Include an ls command -# If this option is enabled a simple ls command will be -# included in redboot so the contents of a directory -# can be listed -# -cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS { - # This option is not active - # The parent CYGPKG_REDBOOT_FILEIO is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Allow RedBoot to support disks -# If this option is enabled then RedBoot will provide commands -# to load disk files. -# -cdl_component CYGPKG_REDBOOT_DISK { - # Flavor: bool - user_value 0 - # value_source user - # Default value: 1 -}; - -# > -# Include Redboot commands for disk access -# -cdl_option CYGSEM_REDBOOT_DISK { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0 - # CYGINT_REDBOOT_DISK_DRIVERS == 0 - # --> 0 -}; - -# Hardware drivers for disk-type devices -# -cdl_interface CYGINT_REDBOOT_DISK_DRIVERS { - # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_DISK - # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0 -}; - -# Maximum number of supported disks -# This option controls the number of disks supported by -# RedBoot. -# -cdl_option CYGNUM_REDBOOT_MAX_DISKS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 -}; - -# Maximum number of partitions per disk -# This option controls the maximum number of supported -# partitions per disk. -# -cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 8 - # value_source default - # Default value: 8 -}; - -# Support IDE disks. -# When this option is enabled, RedBoot will support IDE disks. -# -cdl_component CYGSEM_REDBOOT_DISK_IDE { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0 - # CYGINT_HAL_PLF_IF_IDE == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Work with VMware virtual disks -# This option controls the disk driver behavior at -# ide-init -# -cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE { - # This option is not active - # The parent CYGSEM_REDBOOT_DISK_IDE is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Support Linux second extended filesystems. -# When this option is enabled, RedBoot will support EXT2 -# filesystems. -# -cdl_component CYGSEM_REDBOOT_DISK_EXT2FS { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Support ISO9660 filesystems. -# When this option is enabled, RedBoot will support ISO9660 -# filesystems. -# -cdl_component CYGSEM_REDBOOT_DISK_ISO9660 { - # This option is not active - # The parent CYGPKG_REDBOOT_DISK is disabled - - # Calculated value: 0 - # Flavor: bool - # Current value: 0 -}; - -# < -# Boot scripting -# doc: ref/persistent-state-flash.html -# This contains options related to RedBoot's boot script -# functionality. -# -cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT { - # There is no associated value. -}; - -# > -# Boot scripting enabled -# This option controls whether RedBoot boot script -# functionality is enabled. -# -cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT { - # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG - # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0 - # CYGSEM_REDBOOT_FLASH_CONFIG == 1 - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 -}; - -# Use default RedBoot boot script -# If enabled, this option will tell RedBoot to use the -# value of this option as a default boot script. -# -cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 0 0 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGFUN_REDBOOT_BOOT_SCRIPT - # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG -}; - -# Resolution (in ms) for script timeout value. -# This option controls the resolution of the script -# timeout. The value is specified in milliseconds -# (ms), thus to have the script timeout be defined in -# terms of tenths of seconds, use 100. -# -cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 1000 - # The inferred value should not be edited directly. - inferred_value 10 - # value_source inferred - # Default value: 1000 -}; - -# Script default timeout value -# This option is used to set the default timeout for startup -# scripts, when they are enabled. -# -cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 10 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 10 -}; - -# < -# Support RTC for time & date functions -# When this option is enabled, RedBoot will support commands to -# query and set the real time clock (time and date) -# -cdl_option CYGSEM_REDBOOT_RTC { - # This option is not active - # ActiveIf constraint: CYGPKG_IO_WALLCLOCK - # CYGPKG_IO_WALLCLOCK (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Behave like a ROM monitor -# Enabling this option will allow RedBoot to provide ROM -# monitor-style services to programs which it executes. -# -cdl_option CYGPRI_REDBOOT_ROM_MONITOR { - # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" - # CYG_HAL_STARTUP == ROMRAM - # CYG_HAL_STARTUP == ROMRAM - # --> 1 - - # Calculated value: 1 - # Flavor: bool - # Current value: 1 - # Requires: CYGSEM_HAL_ROM_MONITOR - # CYGSEM_HAL_ROM_MONITOR == 1 - # --> 1 -}; - -# Allow RedBoot to handle GNUPro application 'syscalls'. -# If this option is enabled then RedBoot will install a -# syscall handler to support debugging of applications -# based on GNUPro newlib/bsp. -# -cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - - # The following properties are affected by this value - # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT - # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS - # option CYGPKG_HAL_GDB_FILEIO - # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS -}; - -# > -# Support additional syscalls for 'gprof' profiling -# Support additional syscalls to support a periodic callback -# function for histogram-style profiling, and an enquire/set -# of the tick rate. -# The application must use the GNUPro newlib facilities -# to set this up. -# -cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF { - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT - # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Does the HAL support 'gprof' profiling? -# -cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT { - # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF - # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT -}; - -# Do not raise SIGTRAP when program exits -# For some (single shot) newlib based programs, -# exiting and returning a termination status may be -# the normal expected behavior. -# -cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP { - # This option is not active - # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# Use a common buffer for Zlib and FIS -# Use a common memory buffer for both the zlib workspace -# and FIS directory operations. This can save a substantial -# amount of RAM, especially when flash sectors are large. -# -cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS - # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1 - # CYGOPT_REDBOOT_FIS == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Size of Zlib/FIS common buffer -# Size of common buffer to allocate. Must be at least the -# size of one flash sector. -# -cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE { - # This option is not active - # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x0000C000 - # value_source default - # Default value: 0x0000C000 - # Legal values: 0x4000 to 0x80000000 -}; - -# < -# Buffer size in getc when loading images -# When loading images a buffer is used between redboot and the -# underlying storage medium, eg a filesystem, or a socket etc. -# The size of this buffer can have a big impart on load speed. -# -cdl_option CYGNUM_REDBOOT_GETC_BUFFER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 256 - # value_source default - # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256 - # CYGPKG_REDBOOT_FILEIO == 0 - # --> 256 -}; - -# < -# Redboot for ARM options -# This option lists the target's requirements for a valid Redboot -# configuration. -# -cdl_component CYGPKG_REDBOOT_ARM_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. - - # The following properties are affected by this value -}; - -# > -# Provide the exec command in RedBoot -# This option contains requirements for booting linux -# from RedBoot. The component is enabled/disabled from -# RedBoots CDL. -# -cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC - # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1 - # --> 1 - - # There is no associated value. -}; - -# > -# Enable -x switch for exec command. -# This option allows bi-endian platforms to launch kernels -# built for an endianess different than the RedBoot endianess -# -cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Physical base address of linux kernel -# This is the physical address of the base of the -# Linux kernel image. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x70108000 - # value_source default - # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT - # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 - # --> 0x70108000 -}; - -# Default physical base address of linux kernel -# This is the physical address of the base of the -# Linux kernel image. This option gets set by the -# platform CDL. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00008000 - # The inferred value should not be edited directly. - inferred_value 0x70108000 - # value_source inferred - # Default value: 0x00008000 - - # The following properties are affected by this value - # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS - # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT - # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS - # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 -}; - -# Base address of linux kernel parameter tags -# This is the base address of the area of memory used to -# pass parameters to the Linux kernel. This should be chosen -# to avoid overlap with the kernel and any ramdisk image. -# -cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00000100 - # value_source default - # Default value: 0x00000100 -}; - -# < -# < -# Redboot HAL options -# This option lists the target's requirements for a valid Redboot -# configuration. -# -cdl_component CYGPKG_REDBOOT_HAL_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. -}; - -# > -# Build Redboot ROM binary image -# This option enables the conversion of the Redboot ELF -# image to a binary image suitable for ROM programming. -# -cdl_option CYGBLD_BUILD_REDBOOT_BIN { - # ActiveIf constraint: CYGBLD_BUILD_REDBOOT - # CYGBLD_BUILD_REDBOOT == 1 - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Redboot HAL variant options -# -cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS { - # ActiveIf constraint: CYGPKG_REDBOOT - # CYGPKG_REDBOOT == current - # --> 1 - - # There is no associated value. - # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 - # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000 - # --> 1 -}; - -# < -# ISO C and POSIX infrastructure -# eCos supports implementations of ISO C libraries and POSIX -# implementations. This package provides infrastructure used by -# all such implementations. -# -cdl_package CYGPKG_ISOINFRA { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_STRING - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_COMPRESS_ZLIB - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_IO_FLASH - # Requires: CYGPKG_ISOINFRA - # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY - # Requires: CYGPKG_ISOINFRA - # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY - # DefaultValue: 0 != CYGPKG_ISOINFRA - # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS - # ActiveIf: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_I18N - # Requires: CYGPKG_ISOINFRA - # package CYGPKG_LIBC_STDLIB - # Requires: CYGPKG_ISOINFRA -}; - -# > -# Startup and termination -# -cdl_component CYGPKG_ISO_STARTUP { - # There is no associated value. -}; - -# > -# main() startup implementations -# Implementations of this interface arrange for a user-supplied -# main() to be called in an ISO compatible environment. -# -cdl_interface CYGINT_ISO_MAIN_STARTUP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP - # CYGINT_ISO_MAIN_STARTUP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MAIN_STARTUP - # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP -}; - -# environ implementations -# Implementations of this interface provide the environ -# variable required by POSIX. -# -cdl_interface CYGINT_ISO_ENVIRON { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_ENVIRON - # CYGINT_ISO_ENVIRON == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ENVIRON - # Requires: 1 >= CYGINT_ISO_ENVIRON -}; - -# < -# ctype.h functions -# -cdl_component CYGPKG_ISO_CTYPE_H { - # There is no associated value. -}; - -# > -# Number of implementations of ctype functions -# -cdl_interface CYGINT_ISO_CTYPE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_CTYPE - # CYGINT_ISO_CTYPE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_CTYPE - # Requires: 1 >= CYGINT_ISO_CTYPE - # package CYGPKG_HAL_ARM_TX53KARO - # Requires: CYGINT_ISO_CTYPE - # option CYGFUN_LIBC_STRING_BSD_FUNCS - # Requires: CYGINT_ISO_CTYPE - # package CYGPKG_LIBC_STDLIB - # Requires: CYGINT_ISO_CTYPE -}; - -# Ctype implementation header -# -cdl_option CYGBLD_ISO_CTYPE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" - # option CYGIMP_LIBC_I18N_CTYPE_INLINES - # Requires: CYGBLD_ISO_CTYPE_HEADER == "" -}; - -# < -# Error handling -# -cdl_component CYGPKG_ISO_ERRNO { - # There is no associated value. -}; - -# > -# Number of implementations of error codes -# -cdl_interface CYGINT_ISO_ERRNO_CODES { - # Implemented by CYGPKG_ERROR, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_ERRNO_CODES - # CYGINT_ISO_ERRNO_CODES == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ERRNO_CODES - # Requires: 1 >= CYGINT_ISO_ERRNO_CODES -}; - -# Error codes implementation header -# -cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_ERROR - # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "" -}; - -# Number of implementations of errno variable -# -cdl_interface CYGINT_ISO_ERRNO { - # Implemented by CYGPKG_ERROR_ERRNO, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_ERRNO - # CYGINT_ISO_ERRNO == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_ERRNO - # Requires: 1 >= CYGINT_ISO_ERRNO -}; - -# errno variable implementation header -# -cdl_option CYGBLD_ISO_ERRNO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # component CYGPKG_ERROR_ERRNO - # Requires: CYGBLD_ISO_ERRNO_HEADER == "" -}; - -# < -# Locale-related functions -# -cdl_component CYGPKG_ISO_LOCALE { - # There is no associated value. -}; - -# > -# Number of implementations of locale functions -# -cdl_interface CYGINT_ISO_LOCALE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_LOCALE - # CYGINT_ISO_LOCALE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_LOCALE - # Requires: 1 >= CYGINT_ISO_LOCALE -}; - -# Locale implementation header -# -cdl_option CYGBLD_ISO_LOCALE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Standard I/O-related functionality -# -cdl_component CYGPKG_ISO_STDIO { - # There is no associated value. -}; - -# > -# Number of implementations of stdio file types -# -cdl_interface CYGINT_ISO_STDIO_FILETYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES - # CYGINT_ISO_STDIO_FILETYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILETYPES - # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES -}; - -# Stdio file types implementation header -# -cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Stdio standard streams implementations -# -cdl_interface CYGINT_ISO_STDIO_STREAMS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS - # CYGINT_ISO_STDIO_STREAMS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_STREAMS - # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS -}; - -# Stdio standard streams implementation header -# This header file must define stdin, stdout -# and stderr. -# -cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file operations -# -cdl_interface CYGINT_ISO_STDIO_FILEOPS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS - # CYGINT_ISO_STDIO_FILEOPS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEOPS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS -}; - -# Stdio file operations implementation header -# This header controls the file system operations on a file -# such as remove(), rename(), tmpfile(), tmpnam() and associated -# constants. -# -cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file access functionals -# -cdl_interface CYGINT_ISO_STDIO_FILEACCESS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS - # CYGINT_ISO_STDIO_FILEACCESS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEACCESS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FILEACCESS -}; - -# Stdio file access implementation header -# This header controls the file access operations -# such as fclose(), fflush(), fopen(), freopen(), setbuf(), -# setvbuf(), and associated constants. -# -cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio formatted I/O -# -cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO - # CYGINT_ISO_STDIO_FORMATTED_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FORMATTED_IO - # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FORMATTED_IO -}; - -# Stdio formatted I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio character I/O -# -cdl_interface CYGINT_ISO_STDIO_CHAR_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO - # CYGINT_ISO_STDIO_CHAR_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_CHAR_IO - # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO -}; - -# Stdio character I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio direct I/O -# -cdl_interface CYGINT_ISO_STDIO_DIRECT_IO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO - # CYGINT_ISO_STDIO_DIRECT_IO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_DIRECT_IO - # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO -}; - -# Stdio direct I/O implementation header -# -cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio file positioning -# -cdl_interface CYGINT_ISO_STDIO_FILEPOS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS - # CYGINT_ISO_STDIO_FILEPOS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_FILEPOS - # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STDIO_FILEPOS -}; - -# Stdio file positioning implementation header -# -cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of stdio error handling -# -cdl_interface CYGINT_ISO_STDIO_ERROR { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_ERROR - # CYGINT_ISO_STDIO_ERROR == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_ERROR - # Requires: 1 >= CYGINT_ISO_STDIO_ERROR -}; - -# Stdio error handling implementation header -# -cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX fd-related function implementations -# -cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS - # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS - # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS -}; - -# POSIX fd-related function implementation header -# -cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Standard general utility functions -# -cdl_component CYGPKG_ISO_STDLIB { - # There is no associated value. -}; - -# > -# String conversion function implementations -# -cdl_interface CYGINT_ISO_STDLIB_STRCONV { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV - # CYGINT_ISO_STDLIB_STRCONV == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_STRCONV - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV -}; - -# String conversion function implementation header -# -cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_ATOX - # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "" -}; - -# String to FP conversion function implementations -# -cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT { - # Implemented by CYGFUN_LIBC_strtod, active, disabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT - # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT - # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT -}; - -# String to FP conversion function implementation header -# -cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Random number generator implementations -# -cdl_interface CYGINT_ISO_RAND { - # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled - # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled - # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_RAND - # CYGINT_ISO_RAND == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_RAND - # Requires: 1 >= CYGINT_ISO_RAND -}; - -# Random number generator implementation header -# -cdl_option CYGBLD_ISO_RAND_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Malloc implementations -# -cdl_interface CYGINT_ISO_MALLOC { - # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_MALLOC - # CYGINT_ISO_MALLOC == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MALLOC - # Requires: 1 >= CYGINT_ISO_MALLOC - # option CYGFUN_LIBC_STRING_STRDUP - # ActiveIf: CYGINT_ISO_MALLOC -}; - -# Malloc implementation header -# -cdl_option CYGBLD_ISO_MALLOC_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Mallinfo() implementations -# -cdl_interface CYGINT_ISO_MALLINFO { - # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_MALLINFO - # CYGINT_ISO_MALLINFO == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MALLINFO - # Requires: 1 >= CYGINT_ISO_MALLINFO -}; - -# Mallinfo() implementation header -# -cdl_option CYGBLD_ISO_MALLINFO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Program exit functionality implementations -# -cdl_interface CYGINT_ISO_EXIT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_EXIT - # CYGINT_ISO_EXIT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_EXIT - # Requires: 1 >= CYGINT_ISO_EXIT - # option CYGFUN_INFRA_DUMMY_ABORT - # Requires: !CYGINT_ISO_EXIT - # option CYGFUN_INFRA_DUMMY_ABORT - # DefaultValue: CYGINT_ISO_EXIT == 0 -}; - -# Program exit functionality implementation header -# -cdl_option CYGBLD_ISO_EXIT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Program environment implementations -# -cdl_interface CYGINT_ISO_STDLIB_ENVIRON { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON - # CYGINT_ISO_STDLIB_ENVIRON == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_ENVIRON - # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON -}; - -# Program environment implementation header -# -cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# system() implementations -# -cdl_interface CYGINT_ISO_STDLIB_SYSTEM { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM - # CYGINT_ISO_STDLIB_SYSTEM == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_SYSTEM - # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM -}; - -# system() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# bsearch() implementations -# -cdl_interface CYGINT_ISO_BSEARCH { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_BSEARCH - # CYGINT_ISO_BSEARCH == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_BSEARCH - # Requires: 1 >= CYGINT_ISO_BSEARCH -}; - -# bsearch() implementation header -# -cdl_option CYGBLD_ISO_BSEARCH_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# qsort() implementations -# -cdl_interface CYGINT_ISO_QSORT { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT - # CYGINT_ISO_STDLIB_QSORT (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# qsort() implementation header -# -cdl_option CYGBLD_ISO_QSORT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# abs()/labs() implementations -# -cdl_interface CYGINT_ISO_ABS { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_ABS - # CYGINT_ISO_STDLIB_ABS (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# abs()/labs() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_ABS - # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "" -}; - -# div()/ldiv() implementations -# -cdl_interface CYGINT_ISO_DIV { - # Implemented by CYGPKG_LIBC_STDLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_DIV - # CYGINT_ISO_STDLIB_DIV (unknown) == 0 - # --> 1 - - # The following properties are affected by this value -}; - -# div()/ldiv() implementation header -# -cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGIMP_LIBC_STDLIB_INLINE_DIV - # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "" -}; - -# Header defining the implementation's MB_CUR_MAX -# -cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 - - # The following properties are affected by this value - # interface CYGINT_LIBC_I18N_MB_REQUIRED - # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "" -}; - -# Multibyte character implementations -# -cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE { - # Implemented by CYGPKG_LIBC_I18N, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE - # CYGINT_ISO_STDLIB_MULTIBYTE == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STDLIB_MULTIBYTE - # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE -}; - -# Multibyte character implementation header -# -cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# String functions -# -cdl_component CYGPKG_ISO_STRING { - # There is no associated value. -}; - -# > -# Number of implementations of strerror() function -# -cdl_interface CYGINT_ISO_STRERROR { - # Implemented by CYGPKG_ERROR_STRERROR, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRERROR - # CYGINT_ISO_STRERROR == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRERROR - # Requires: 1 >= CYGINT_ISO_STRERROR -}; - -# strerror() implementation header -# -cdl_option CYGBLD_ISO_STRERROR_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGPKG_ERROR_STRERROR - # Requires: CYGBLD_ISO_STRERROR_HEADER == "" -}; - -# memcpy() implementation header -# -cdl_option CYGBLD_ISO_MEMCPY_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# memset() implementation header -# -cdl_option CYGBLD_ISO_MEMSET_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of strtok_r() function -# -cdl_interface CYGINT_ISO_STRTOK_R { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRTOK_R - # CYGINT_ISO_STRTOK_R == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRTOK_R - # Requires: 1 >= CYGINT_ISO_STRTOK_R -}; - -# strtok_r() implementation header -# -cdl_option CYGBLD_ISO_STRTOK_R_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "" -}; - -# Number of implementations of locale-specific string functions -# This covers locale-dependent string functions such as strcoll() -# and strxfrm(). -# -cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS - # CYGINT_ISO_STRING_LOCALE_FUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_LOCALE_FUNCS - # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS -}; - -# Locale-specific string functions' implementation header -# This covers locale-dependent string functions such as strcoll() -# and strxfrm(). -# -cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "" -}; - -# Number of implementations of BSD string functions -# -cdl_interface CYGINT_ISO_STRING_BSD_FUNCS { - # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS - # CYGINT_ISO_STRING_BSD_FUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_BSD_FUNCS - # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS -}; - -# BSD string functions' implementation header -# -cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # option CYGFUN_LIBC_STRING_BSD_FUNCS - # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "" -}; - -# Number of implementations of other mem*() functions -# -cdl_interface CYGINT_ISO_STRING_MEMFUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS - # CYGINT_ISO_STRING_MEMFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_MEMFUNCS - # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_ISO_STRING_MEMFUNCS - # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE - # Requires: CYGINT_ISO_STRING_MEMFUNCS -}; - -# Other mem*() functions' implementation header -# -cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "" -}; - -# Number of implementations of other ISO C str*() functions -# This covers the other str*() functions defined by ISO C. -# -cdl_interface CYGINT_ISO_STRING_STRFUNCS { - # Implemented by CYGPKG_LIBC_STRING, active, enabled - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 1 - # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_STRING_STRFUNCS - # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_INFRA_DUMMY_STRLEN - # Requires: !CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_INFRA_DUMMY_STRLEN - # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0 - # component CYGBLD_BUILD_REDBOOT - # Requires: CYGINT_ISO_STRING_STRFUNCS - # component CYGPKG_IO_ETH_DRIVERS_NET - # Requires: CYGINT_ISO_STRING_STRFUNCS - # option CYGFUN_COMPRESS_ZLIB_GZIO - # Requires: CYGINT_ISO_STRING_STRFUNCS - # package CYGPKG_IO_FLASH - # Requires: CYGINT_ISO_STRING_STRFUNCS - # package CYGPKG_LIBC_STDLIB - # Requires: CYGINT_ISO_STRING_STRFUNCS -}; - -# Other ISO C str*() functions' implementation header -# This covers the other str*() functions defined by ISO C. -# -cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 - - # The following properties are affected by this value - # package CYGPKG_LIBC_STRING - # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "" -}; - -# < -# Clock and time functionality -# -cdl_component CYGPKG_ISO_TIME { - # There is no associated value. -}; - -# > -# time_t implementation header -# -cdl_option CYGBLD_ISO_TIME_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# clock_t implementation header -# -cdl_option CYGBLD_ISO_CLOCK_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# struct timeval implementation header -# -cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# fnmatch implementation header -# -cdl_option CYGBLD_ISO_FNMATCH_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX timer types -# -cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES - # CYGINT_ISO_POSIX_TIMER_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMER_TYPES - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES -}; - -# POSIX timer types implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX clock types -# -cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES - # CYGINT_ISO_POSIX_CLOCK_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_CLOCK_TYPES - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES -}; - -# POSIX clock types implementation header -# -cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of ISO C types -# -cdl_interface CYGINT_ISO_C_TIME_TYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES - # CYGINT_ISO_C_TIME_TYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_C_TIME_TYPES - # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES -}; - -# ISO C time types implementation header -# -cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX timers -# -cdl_interface CYGINT_ISO_POSIX_TIMERS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS - # CYGINT_ISO_POSIX_TIMERS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMERS - # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS -}; - -# POSIX timer implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of POSIX clocks -# -cdl_interface CYGINT_ISO_POSIX_CLOCKS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS - # CYGINT_ISO_POSIX_CLOCKS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_CLOCKS - # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS -}; - -# POSIX clocks implementation header -# -cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of ISO C clock functions -# -cdl_interface CYGINT_ISO_C_CLOCK_FUNCS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS - # CYGINT_ISO_C_CLOCK_FUNCS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_C_CLOCK_FUNCS - # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS -}; - -# ISO C clock functions' implementation header -# -cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of implementations of tzset() function -# -cdl_interface CYGINT_ISO_TZSET { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_TZSET - # CYGINT_ISO_TZSET == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_TZSET - # Requires: 1 >= CYGINT_ISO_TZSET -}; - -# tzset() implementation header -# -cdl_option CYGBLD_ISO_TZSET_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Signal functionality -# -cdl_component CYGPKG_ISO_SIGNAL { - # There is no associated value. -}; - -# > -# Number of implementations of signal numbers -# -cdl_interface CYGINT_ISO_SIGNAL_NUMBERS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS - # CYGINT_ISO_SIGNAL_NUMBERS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGNAL_NUMBERS - # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS -}; - -# Signal numbering implementation header -# This header provides the mapping of signal -# names (e.g. SIGBUS) to numbers. -# -cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Number of signal implementations -# -cdl_interface CYGINT_ISO_SIGNAL_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL - # CYGINT_ISO_SIGNAL_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGNAL_IMPL - # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL -}; - -# Signals implementation header -# -cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX real time signals feature test macro -# This defines the POSIX feature test macro -# that indicates that the POSIX real time signals -# are present. -# -cdl_interface CYGINT_POSIX_REALTIME_SIGNALS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS - # CYGINT_POSIX_REALTIME_SIGNALS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_POSIX_REALTIME_SIGNALS - # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS -}; - -# < -# Non-local jumps functionality -# -cdl_component CYGPKG_ISO_SETJMP { - # There is no associated value. -}; - -# > -# setjmp() / longjmp() implementations -# -cdl_interface CYGINT_ISO_SETJMP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SETJMP - # CYGINT_ISO_SETJMP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SETJMP - # Requires: 1 >= CYGINT_ISO_SETJMP -}; - -# setjmp() / longjmp() implementation header -# -cdl_option CYGBLD_ISO_SETJMP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# sigsetjmp() / siglongjmp() implementations -# -cdl_interface CYGINT_ISO_SIGSETJMP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SIGSETJMP - # CYGINT_ISO_SIGSETJMP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SIGSETJMP - # Requires: 1 >= CYGINT_ISO_SIGSETJMP -}; - -# sigsetjmp() / siglongjmp() implementation header -# -cdl_option CYGBLD_ISO_SIGSETJMP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Assertions implementation header -# -cdl_option CYGBLD_ISO_ASSERT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX file control -# This covers the POSIX file control definitions, -# normally found in -# -cdl_component CYGPKG_ISO_POSIX_FCNTL { - # There is no associated value. -}; - -# > -# POSIX open flags implementation header -# -cdl_option CYGBLD_ISO_OFLAG_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX fcntl() implementations -# -cdl_interface CYGINT_ISO_FCNTL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_FCNTL - # CYGINT_ISO_FCNTL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_FCNTL - # Requires: 1 >= CYGINT_ISO_FCNTL -}; - -# POSIX fcntl() implementation header -# -cdl_option CYGBLD_ISO_FCNTL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX file open implementations -# -cdl_interface CYGINT_ISO_OPEN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_OPEN - # CYGINT_ISO_OPEN == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_OPEN - # Requires: 1 >= CYGINT_ISO_OPEN -}; - -# POSIX file open implementation header -# -cdl_option CYGBLD_ISO_OPEN_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# definitions implementation header -# -cdl_option CYGBLD_ISO_STAT_DEFS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX directory reading implementation -# -cdl_interface CYGINT_ISO_DIRENT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_DIRENT - # CYGINT_ISO_DIRENT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DIRENT - # Requires: 1 >= CYGINT_ISO_DIRENT -}; - -# definitions implementation header -# -cdl_option CYGBLD_ISO_DIRENT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX contents -# This covers the types required by POSIX to be in -# -# -cdl_component CYGPKG_ISO_POSIX_TYPES { - # There is no associated value. -}; - -# > -# POSIX thread types implementations -# -cdl_interface CYGINT_ISO_PTHREADTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # CYGINT_ISO_PTHREADTYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREADTYPES - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # interface CYGINT_ISO_PMUTEXTYPES - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES -}; - -# POSIX thread types implementation header -# -cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX mutex types implementations -# -cdl_interface CYGINT_ISO_PMUTEXTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_PTHREADTYPES - # CYGINT_ISO_PTHREADTYPES == 0 - # --> 1 -}; - -# POSIX mutex types implementation header -# -cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# ssize_t implementation header -# -cdl_option CYGBLD_ISO_SSIZE_T_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Filesystem types implementation header -# -cdl_option CYGBLD_ISO_FSTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# gid_t, pid_t, uid_t implementation header -# -cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Non-POSIX contents -# This covers the extra types required by non-POSIX -# packages to be in . These would normally -# only be visible if _POSIX_SOURCE is not defined. -# -cdl_component CYGPKG_ISO_EXTRA_TYPES { - # There is no associated value. -}; - -# > -# BSD compatible types -# -cdl_interface CYGINT_ISO_BSDTYPES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_BSDTYPES - # CYGINT_ISO_BSDTYPES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_BSDTYPES - # Requires: 1 >= CYGINT_ISO_BSDTYPES -}; - -# BSD types header -# -cdl_option CYGBLD_ISO_BSDTYPES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Utsname structure -# -cdl_component CYGPKG_ISO_UTSNAME { - # There is no associated value. -}; - -# > -# Utsname header -# -cdl_option CYGBLD_ISO_UTSNAME_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX scheduler -# -cdl_component CYGPKG_ISO_SCHED { - # There is no associated value. -}; - -# > -# POSIX scheduler implementations -# -cdl_interface CYGINT_ISO_SCHED_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SCHED_IMPL - # CYGINT_ISO_SCHED_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SCHED_IMPL - # Requires: 1 >= CYGINT_ISO_SCHED_IMPL -}; - -# POSIX scheduler implementation header -# -cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX semaphores -# -cdl_component CYGPKG_ISO_SEMAPHORES { - # There is no associated value. -}; - -# > -# POSIX semaphore implementations -# -cdl_interface CYGINT_ISO_SEMAPHORES { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_SEMAPHORES - # CYGINT_ISO_SEMAPHORES == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SEMAPHORES - # Requires: 1 >= CYGINT_ISO_SEMAPHORES -}; - -# POSIX semaphore implementation header -# -cdl_option CYGBLD_ISO_SEMAPHORES_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX message queues -# -cdl_component CYGPKG_ISO_MQUEUE { - # There is no associated value. -}; - -# > -# Implementations -# -cdl_interface CYGINT_ISO_MQUEUE { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_MQUEUE - # Requires: 1 >= CYGINT_ISO_MQUEUE - # option CYGNUM_ISO_MQUEUE_OPEN_MAX - # ActiveIf: CYGINT_ISO_MQUEUE - # option CYGNUM_ISO_MQUEUE_PRIO_MAX - # ActiveIf: CYGINT_ISO_MQUEUE -}; - -# Implementation header -# -cdl_option CYGBLD_ISO_MQUEUE_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Maximum number of open message queues -# -cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX { - # This option is not active - # ActiveIf constraint: CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 0 - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0 - # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0 - # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0 - # --> 0 0 -}; - -# Maximum number of message priorities -# -cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX { - # This option is not active - # ActiveIf constraint: CYGINT_ISO_MQUEUE - # CYGINT_ISO_MQUEUE == 0 - # --> 0 - - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 1 65535 - # value_source default - # Default value: 1 65535 -}; - -# < -# POSIX threads -# -cdl_component CYGPKG_ISO_PTHREAD { - # There is no associated value. -}; - -# > -# POSIX pthread implementations -# -cdl_interface CYGINT_ISO_PTHREAD_IMPL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL - # CYGINT_ISO_PTHREAD_IMPL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREAD_IMPL - # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL -}; - -# POSIX pthread implementation header -# -cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX mutex/cond var implementations -# -cdl_interface CYGINT_ISO_PTHREAD_MUTEX { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX - # CYGINT_ISO_PTHREAD_MUTEX == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_PTHREAD_MUTEX - # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX -}; - -# POSIX mutex/cond var implementation header -# -cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Limits -# -cdl_component CYGPKG_ISO_LIMITS { - # There is no associated value. -}; - -# > -# POSIX pthread limits implementations -# -cdl_interface CYGINT_ISO_POSIX_LIMITS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS - # CYGINT_ISO_POSIX_LIMITS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_LIMITS - # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS -}; - -# POSIX pthread limits implementation header -# -cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# OPEN_MAX implementation header -# -cdl_option CYGBLD_ISO_OPEN_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# LINK_MAX implementation header -# -cdl_option CYGBLD_ISO_LINK_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# NAME_MAX implementation header -# -cdl_option CYGBLD_ISO_NAME_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# PATH_MAX implementation header -# -cdl_option CYGBLD_ISO_PATH_MAX_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# POSIX termios -# -cdl_component CYGPKG_ISO_TERMIOS { - # There is no associated value. -}; - -# > -# POSIX termios implementations -# -cdl_interface CYGINT_ISO_TERMIOS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_TERMIOS - # CYGINT_ISO_TERMIOS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_TERMIOS - # Requires: 1 >= CYGINT_ISO_TERMIOS -}; - -# POSIX termios implementation header -# -cdl_option CYGBLD_ISO_TERMIOS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Dynamic load API -# -cdl_component CYGPKG_ISO_DLFCN { - # There is no associated value. -}; - -# > -# Dynamic load implementations -# -cdl_interface CYGINT_ISO_DLFCN { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 >= CYGINT_ISO_DLFCN - # CYGINT_ISO_DLFCN == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DLFCN - # Requires: 1 >= CYGINT_ISO_DLFCN -}; - -# Dynamic load implementation header -# -cdl_option CYGBLD_ISO_DLFCN_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# UNIX standard functions -# -cdl_component CYGPKG_ISO_UNISTD { - # There is no associated value. -}; - -# > -# POSIX timer operations implementations -# -cdl_interface CYGINT_ISO_POSIX_TIMER_OPS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS - # CYGINT_ISO_POSIX_TIMER_OPS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_TIMER_OPS - # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS -}; - -# POSIX timer operations implementation header -# -cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# POSIX sleep() implementations -# -cdl_interface CYGINT_ISO_POSIX_SLEEP { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP - # CYGINT_ISO_POSIX_SLEEP == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POSIX_SLEEP - # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP -}; - -# POSIX sleep() implementation header -# -cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# select()/poll() functions -# -cdl_component CYGPKG_ISO_SELECT { - # There is no associated value. -}; - -# > -# select() implementations -# -cdl_interface CYGINT_ISO_SELECT { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_SELECT - # CYGINT_ISO_SELECT == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_SELECT - # Requires: 1 >= CYGINT_ISO_SELECT -}; - -# select() implementation header -# -cdl_option CYGBLD_ISO_SELECT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# poll() implementations -# -cdl_interface CYGINT_ISO_POLL { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: 1 >= CYGINT_ISO_POLL - # CYGINT_ISO_POLL == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_POLL - # Requires: 1 >= CYGINT_ISO_POLL -}; - -# poll() implementation header -# -cdl_option CYGBLD_ISO_POLL_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# NetDB utility functions -# -cdl_component CYGPKG_ISO_NETDB { - # There is no associated value. -}; - -# > -# DNS implementations -# -cdl_interface CYGINT_ISO_DNS { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_DNS - # CYGINT_ISO_DNS == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_DNS - # Requires: 1 >= CYGINT_ISO_DNS -}; - -# DNS implementation header -# -cdl_option CYGBLD_ISO_DNS_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Protocol network database implementations -# -cdl_interface CYGINT_ISO_NETDB_PROTO { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_NETDB_PROTO - # CYGINT_ISO_NETDB_PROTO == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_NETDB_PROTO - # Requires: 1 >= CYGINT_ISO_NETDB_PROTO -}; - -# Protocol network database implementation header -# -cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Services network database implementations -# -cdl_interface CYGINT_ISO_NETDB_SERV { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: bool - # Current value: 0 - # Requires: 1 >= CYGINT_ISO_NETDB_SERV - # CYGINT_ISO_NETDB_SERV == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_ISO_NETDB_SERV - # Requires: 1 >= CYGINT_ISO_NETDB_SERV -}; - -# Services network database implementation header -# -cdl_option CYGBLD_ISO_NETDB_SERV_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# < -# Build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_ISOINFRA_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the ISO C and POSIX infrastructure package. -# These flags are used in addition to the set of global flags. -# -cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the ISO C and POSIX infrastructure package. -# These flags are removed from the set of global flags -# if present. -# -cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# < -# Compute CRCs -# doc: ref/services-crc.html -# This package provides support for CRC calculation. Currently -# this is the POSIX 1003 defined CRC algorithm, a 32 CRC by -# Gary S. Brown, and a 16 bit CRC. -# -cdl_package CYGPKG_CRC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # package CYGPKG_COMPRESS_ZLIB - # Requires: CYGPKG_CRC -}; - -# > -# POSIX CRC tests -# -cdl_option CYGPKG_CRC_TESTS { - # Calculated value: "tests/crc_test" - # Flavor: data - # Current_value: tests/crc_test -}; - -# < -# Zlib compress and decompress package -# This package provides support for compression and -# decompression. -# -cdl_package CYGPKG_COMPRESS_ZLIB { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGPKG_CRC - # CYGPKG_CRC == current - # --> 1 - - # The following properties are affected by this value - # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB - # ActiveIf: CYGPKG_COMPRESS_ZLIB -}; - -# > -# Override memory allocation routines. -# -cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC { - # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC - # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0 -}; - -# Should deflate() produce 'gzip' compatible output? -# If this option is set then the output of calling deflate() -# will be wrapped up as a 'gzip' compatible file. -# -cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Does this library need malloc? -# This pseudo-option will force the memalloc library to be -# required iff the application does not provide it's own -# infrastructure. -# -cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC { - # This option is not active - # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0 - # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGPKG_MEMALLOC - # CYGPKG_MEMALLOC == current - # --> 1 -}; - -# Include stdio-like utility functions -# This option enables the stdio-like zlib utility functions -# (gzread/gzwrite and friends) provided in gzio.c. -# -cdl_option CYGFUN_COMPRESS_ZLIB_GZIO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0 - # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0 - # --> 0 - # Requires: CYGINT_ISO_STDIO_FILEPOS - # CYGINT_ISO_STDIO_FILEPOS == 0 - # --> 0 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - # Requires: CYGINT_ISO_STDIO_FORMATTED_IO - # CYGINT_ISO_STDIO_FORMATTED_IO == 0 - # --> 0 - # Requires: CYGINT_ISO_STDIO_FILEACCESS - # CYGINT_ISO_STDIO_FILEACCESS == 0 - # --> 0 -}; - -# Zlib compress and decompress package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-D__ECOS__ -DNO_ERRNO_H" - # value_source default - # Default value: "-D__ECOS__ -DNO_ERRNO_H" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wstrict-prototypes - # value_source default - # Default value: -Wstrict-prototypes -}; - -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# zlib tests -# -cdl_option CYGPKG_COMPRESS_ZLIB_TESTS { - # Calculated value: "tests/zlib1.c tests/zlib2.c" - # Flavor: data - # Current_value: tests/zlib1.c tests/zlib2.c -}; - -# < -# FLASH device drivers -# doc: ref/flash.html -# This option enables drivers for basic I/O services on -# flash devices. -# -cdl_package CYGPKG_IO_FLASH { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGINT_ISO_STRING_STRFUNCS - # CYGINT_ISO_STRING_STRFUNCS == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGSEM_REDBOOT_FLASH_CONFIG - # DefaultValue: CYGPKG_IO_FLASH != 0 - # package CYGPKG_DEVS_FLASH_ONMXC - # ActiveIf: CYGPKG_IO_FLASH -}; - -# > -# Hardware FLASH device drivers -# This option enables the hardware device drivers -# for the current platform. -# -cdl_interface CYGHWR_IO_FLASH_DEVICE { - # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - - # The following properties are affected by this value - # component CYGPKG_REDBOOT_FLASH - # ActiveIf: CYGHWR_IO_FLASH_DEVICE -}; - -# Hardware FLASH device drivers are not in RAM -# Use of this interface is deprecated. -# Drivers should make sure that the functions are -# linked to RAM by putting them in .2ram sections. -# -cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM - # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0 - # --> 1 - - # The following properties are affected by this value - # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM - # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM -}; - -# Hardware can support block locking -# This option will be enabled by devices which can support -# locking (write-protection) of individual blocks. -# -cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING { - # No options implement this inferface - # This value cannot be modified here. - # Flavor: booldata - # Current value: 0 0 - - # The following properties are affected by this value - # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL - # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 -}; - -# Hardware cannot support direct access to FLASH memory -# This option will be asserted by devices which cannot support -# direct access to the FLASH memory contents (e.g. EEPROM or NAND -# devices). In these cases, the driver must provide an appropriate -# hardware access function. -# -cdl_option CYGSEM_IO_FLASH_READ_INDIRECT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM - # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0 - # --> 1 - - # The following properties are affected by this value - # option CYGPRI_REDBOOT_ZLIB_FLASH - # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE - # component CYGHWR_DEVS_FLASH_MMC - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MMC_ESDHC - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MMC_SD - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # option CYGHWR_DEVS_FLASH_MXC_NAND - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 -}; - -# Display status messages during flash operations -# Selecting this option will cause the drivers to print status -# messages as various flash operations are undertaken. -# -cdl_option CYGSEM_IO_FLASH_CHATTER { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Verify data programmed to flash -# Selecting this option will cause verification of data -# programmed to flash. -# -cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - - # The following properties are affected by this value - # option CYGSEM_IO_FLASH_READ_INDIRECT - # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM -}; - -# Platform has flash soft DIP switch write-protect -# Selecting this option will cause the state of a hardware jumper or -# dipswitch to be read by software to determine whether the flash is -# write-protected or not. -# -cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Instantiate in I/O block device API -# Provides a block device accessible using the standard I/O -# API ( cyg_io_read() etc. ) -# -cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE { - # This option is not active - # ActiveIf constraint: CYGPKG_IO - # CYGPKG_IO (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Name of flash device 1 block device -# -cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 { - # This option is not active - # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active - # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"/dev/flash1\"" - # value_source default - # Default value: "\"/dev/flash1\"" -}; - -# > -# -cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 { - # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled - # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 - # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1 - # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0 - # --> 0 - - # The following properties are affected by this value - # interface CYGINT_IO_FLASH_BLOCK_CFG_1 - # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1 -}; - -# Static configuration -# This configures the flash device 1 block device -# with static base and length -# -cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 { - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Start offset from flash base -# This gives the offset from the base of flash which this -# block device corresponds to. -# -cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# Length -# This gives the length of the region of flash given over -# to this block device. -# -cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# < -# Configuration from FIS -# This configures the flash device 1 block device -# from Redboot FIS -# -cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 { - # This option is not active - # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# > -# Name of FIS entry -# -cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 { - # This option is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active - # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled - - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "\"jffs2\"" - # value_source default - # Default value: "\"jffs2\"" -}; - -# < -# < -# < -# Flash device driver build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_IO_FLASH_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the flash device drivers. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the flash device drivers. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Flash device driver tests -# This option specifies the set of tests for the flash device drivers. -# -cdl_component CYGPKG_IO_FLASH_TESTS { - # Calculated value: "tests/flash1" - # Flavor: data - # Current_value: tests/flash1 -}; - -# > -# Start offset from flash base -# This gives the offset from the base of flash where tests -# can be run. It is important to set this correctly, as an -# incorrect value could allow the tests to write over critical -# portions of the FLASH device and possibly render the target -# board totally non-functional. -# -cdl_option CYGNUM_IO_FLASH_TEST_OFFSET { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# Length -# This gives the length of the region of flash used for testing. -# -cdl_option CYGNUM_IO_FLASH_TEST_LENGTH { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0x00100000 - # value_source default - # Default value: 0x00100000 -}; - -# < -# < -# Support FLASH memory on Freescale MXC platforms -# -cdl_package CYGPKG_DEVS_FLASH_ONMXC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # ActiveIf constraint: CYGPKG_IO_FLASH - # CYGPKG_IO_FLASH == current - # --> 1 - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# > -# MXC platform MMC card support -# When this option is enabled, it indicates MMC card is -# supported on the MXC platforms -# -cdl_component CYGHWR_DEVS_FLASH_MMC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 - - # The following properties are affected by this value - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) -}; - -# > -# MXC platform MMC card for newer SDHC controllers -# -cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC { - # This option is not active - # The parent CYGHWR_DEVS_FLASH_MMC is disabled - # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 || - # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 - # CYGPKG_HAL_ARM_MX37 (unknown) == 0 - # CYGPKG_HAL_ARM_MX35 (unknown) == 0 - # CYGPKG_HAL_ARM_MX25 (unknown) == 0 - # CYGPKG_HAL_ARM_MX51 (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 -}; - -# MXC platform MMC card for older MMC/SD controllers -# -cdl_option CYGHWR_DEVS_FLASH_MMC_SD { - # This option is not active - # The parent CYGHWR_DEVS_FLASH_MMC is disabled - # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS - # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0 - # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 -}; - -# < -# MXC platform NOR flash memory support -# When this option is enabled, it indicates NOR flash is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_NOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 0 - - # The following properties are affected by this value - # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR - # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1 - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) -}; - -# MXC platform NAND flash memory support -# When this option is enabled, it indicates NAND flash is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_NAND { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 - # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # CYGSEM_IO_FLASH_READ_INDIRECT == 1 - # --> 1 - - # The following properties are affected by this value - # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH - # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # option CYGHWR_DEVS_FLASH_MXC_MULTI - # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND - # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND -}; - -# i.MX platform SPI NOR flash memory support -# When this option is enabled, it indicates SPI NOR flash is -# supported on the i.MX platforms -# -cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # --> 0 -}; - -# MXC platform ATA support -# When this option is enabled, it indicates ATA is -# supported on the MXC platforms -# -cdl_option CYGHWR_DEVS_FLASH_MXC_ATA { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Use a flash based Bad Block Table -# -cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH { - # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # --> 1 - - # There is no associated value. -}; - -# > -# When this option is enabled, the driver will search for a flash -# based bad block table -# -cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# header file defining the NAND BBT descriptor -# defines the name of the header file that describes the BBT layout -# -cdl_component CYGHWR_FLASH_NAND_BBT_HEADER { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 0 -}; - -# Number of blocks to reserve for BBT -# Number of blocks to reserve for BBT -# -cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 4 - # value_source default - # Default value: 4 -}; - -# < -# MXC platform multi flash memory support -# When this option is enabled, it indicates multi flashes are -# supported on the MXC platforms (like NAND and NOR) -# -cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI { - # This option is not active - # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) || - # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) || - # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC) - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # CYGHWR_DEVS_FLASH_MMC == 0 - # CYGHWR_DEVS_FLASH_MXC_NOR == 0 - # CYGHWR_DEVS_FLASH_MMC == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 -}; - -# MXC platform NAND flash reset workaround support -# When this option is enabled, it indicates 0xFFFF is used for -# the NAND reset command instead of 0xFF. -# -cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND { - # No options implement this inferface - # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND - # CYGHWR_DEVS_FLASH_MXC_NAND == 1 - # --> 1 - - # This value cannot be modified here. - # Flavor: data - # Current_value: 0 -}; - -# < -# < -# Dynamic memory allocation -# doc: ref/memalloc.html -# This package provides memory allocator infrastructure required for -# dynamic memory allocators, including the ISO standard malloc -# interface. It also contains some sample implementations. -# -cdl_package CYGPKG_MEMALLOC { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC - # Requires: CYGPKG_MEMALLOC -}; - -# > -# Memory allocator implementations -# This component contains configuration options related to the -# various memory allocators available. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATORS { - # There is no associated value. -}; - -# > -# Fixed block allocator -# This component contains configuration options related to the -# fixed block memory allocator. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# Simple variable block allocator -# This component contains configuration options related to the -# simple variable block memory allocator. This allocator is not -# very fast, and in particular does not scale well with large -# numbers of allocations. It is however very compact in terms of -# code size and does not have very much overhead per allocation. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are added that allow a thread to wait until memory -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Coalesce memory -# The variable-block memory allocator can perform coalescing -# of memory whenever the application code releases memory back -# to the pool. This coalescing reduces the possibility of -# memory fragmentation problems, but involves extra code and -# processor cycles. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - - # The following properties are affected by this value - # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE - # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE -}; - -# < -# Doug Lea's malloc -# This component contains configuration options related to the -# port of Doug Lea's memory allocator, normally known as -# dlmalloc. dlmalloc has a reputation for being both fast -# and space-conserving, as well as resisting fragmentation well. -# It is a common choice for a general purpose allocator and -# has been used in both newlib and Linux glibc. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC { - # There is no associated value. -}; - -# > -# Debug build -# Doug Lea's malloc implementation has substantial amounts -# of internal checking in order to verify the operation -# and consistency of the allocator. However this imposes -# substantial overhead on each operation. Therefore this -# checking may be individually disabled. -# -cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 != CYGDBG_USE_ASSERTS - # CYGDBG_USE_ASSERTS == 0 - # --> 0 - # Requires: CYGDBG_USE_ASSERTS - # CYGDBG_USE_ASSERTS == 0 - # --> 0 -}; - -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 -}; - -# Support more than one instance -# Having this option disabled allows important -# implementation structures to be declared as a single -# static instance, allowing faster access. However this -# would fail if there is more than one instance of -# the dlmalloc allocator class. Therefore this option can -# be enabled if multiple instances are required. Note: as -# a special case, if this allocator is used as the -# implementation of malloc, and it can be determined there -# is more than one malloc pool, then this option will be -# silently enabled. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# Use system memmove() and memset() -# This may be used to control whether memset() and memmove() -# are used within the implementation. The alternative is -# to use some macro equivalents, which some people report -# are faster in some circumstances. -# -cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 0 != CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - # Requires: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 -}; - -# Minimum alignment of allocated blocks -# This option controls the minimum alignment that the -# allocated memory blocks are aligned on, specified as -# 2^N. Note that using large mininum alignments can lead -# to excessive memory wastage. -# -cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 3 - # value_source default - # Default value: 3 - # Legal values: 3 to 10 -}; - -# < -# Variable block allocator with separate metadata -# This component contains configuration options related to the -# variable block memory allocator with separate metadata. -# -cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA { - # There is no associated value. -}; - -# > -# Make thread safe -# With this option enabled, this allocator will be -# made thread-safe. Additionally allocation functions -# are made available that allow a thread to wait -# until memory is available. -# -cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# < -# < -# Kernel C API support for memory allocation -# This option must be enabled to provide the extensions required -# to support integration into the kernel C API. -# -cdl_option CYGFUN_MEMALLOC_KAPI { - # This option is not active - # ActiveIf constraint: CYGPKG_KERNEL - # CYGPKG_KERNEL (unknown) == 0 - # --> 0 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: CYGFUN_KERNEL_API_C - # CYGFUN_KERNEL_API_C (unknown) == 0 - # --> 0 -}; - -# malloc(0) returns NULL -# This option controls the behavior of malloc(0) ( or calloc with -# either argument 0 ). It is permitted by the standard to return -# either a NULL pointer or a unique pointer. Enabling this option -# forces a NULL pointer to be returned. -# -cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# Breakpoint site when running out of memory -# Whenever the system runs out of memory, it invokes this function -# before either going to sleep waiting for memory to become -# available or returning failure. -# -cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# malloc() and supporting allocators -# This component enables support for dynamic memory -# allocation as supplied by the functions malloc(), -# free(), calloc() and realloc(). As these -# functions are often used, but can have quite an -# overhead, disabling them here can ensure they -# cannot even be used accidentally when static -# allocation is preferred. Within this component are -# various allocators that can be selected for use -# as the underlying implementation of the dynamic -# allocation functions. -# -cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS { - # ActiveIf constraint: CYGPKG_ISOINFRA - # CYGPKG_ISOINFRA == current - # --> 1 - - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 -}; - -# > -# Use external heap definition -# This option allows other components in the -# system to override the default system -# provision of heap memory pools. This should -# be set to a header which provides the equivalent -# definitions to . -# -cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# Use external implementation of joining multiple heaps -# The default implementation of joining multiple heaps -# is fine for the case where there are multiple disjoint -# memory regions of the same type. However, in a system -# there might be e.g. a small amount of internal SRAM and -# a large amount of external DRAM. The SRAM is faster and -# the DRAM is slower. An application can implement some -# heuristic to choose which pool to allocate from. This -# heuristic can be highly application specific. -# -cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H { - # Flavor: booldata - # No user value, uncomment the following line to provide one. - # user_value 0 0 - # value_source default - # Default value: 0 0 -}; - -# malloc() allocator implementations -# -cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS { - # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled - # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled - # This value cannot be modified here. - # Flavor: data - # Current_value: 1 - # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 - # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 - # --> 1 - - # The following properties are affected by this value - # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS - # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1 -}; - -# malloc() implementation instantiation data -# Memory allocator implementations that are capable of being -# used underneath malloc() must be instantiated. The code -# to do this is set in this option. It is only intended to -# be set by the implementation, not the user. -# -cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value - # value_source default - # Default value: - - # The following properties are affected by this value - # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" -}; - -# Simple variable block implementation -# This causes malloc() to use the simple -# variable block allocator. -# -cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == - # --> 0 - # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE - # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1 - # --> 1 -}; - -# Doug Lea's malloc implementation -# This causes malloc() to use a version of Doug Lea's -# malloc (dlmalloc) as the underlying implementation. -# -cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "" - # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == - # --> 1 -}; - -# < -# Size of the fallback dynamic memory pool in bytes -# If *no* heaps are configured in your memory layout, -# dynamic memory allocation by -# malloc() and calloc() must be from a fixed-size, -# contiguous memory pool (note here that it is the -# pool that is of a fixed size, but malloc() is still -# able to allocate variable sized chunks of memory -# from it). This option is the size -# of that pool, in bytes. Note that not all of -# this is available for programs to -# use - some is needed for internal information -# about memory regions, and some may be lost to -# ensure that memory allocation only returns -# memory aligned on word (or double word) -# boundaries - a very common architecture -# constraint. -# -cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 16384 - # value_source default - # Default value: 16384 - # Legal values: 32 to 0x7fffffff -}; - -# Common memory allocator package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_MEMALLOC_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "-fno-rtti -Woverloaded-virtual" - # value_source default - # Default value: "-fno-rtti -Woverloaded-virtual" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building this package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value -Wno-pointer-sign - # value_source default - # Default value: -Wno-pointer-sign -}; - -# Tests -# This option specifies the set of tests for this package. -# -cdl_option CYGPKG_MEMALLOC_TESTS { - # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2" - # Flavor: data - # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2 -}; - -# < -# < -# Common error code support -# This package contains the common list of error and -# status codes. It is held centrally to allow -# packages to interchange error codes and status -# codes in a common way, rather than each package -# having its own conventions for error/status -# reporting. The error codes are modelled on the -# POSIX style naming e.g. EINVAL etc. This package -# also provides the standard strerror() function to -# convert error codes to textual representation, as -# well as an implementation of the errno idiom. -# -cdl_package CYGPKG_ERROR { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "" - # CYGBLD_ISO_ERRNO_CODES_HEADER == - # --> 1 -}; - -# > -# errno variable -# This package controls the behaviour of the -# errno variable (or more strictly, expression) -# from . -# -cdl_component CYGPKG_ERROR_ERRNO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_ERRNO_HEADER == "" - # CYGBLD_ISO_ERRNO_HEADER == - # --> 1 -}; - -# > -# Per-thread errno -# This option controls whether the standard error -# code reporting variable errno is a per-thread -# variable, rather than global. -# -cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # The inferred value should not be edited directly. - inferred_value 0 - # value_source inferred - # Default value: 1 - # Requires: CYGVAR_KERNEL_THREADS_DATA - # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0 - # --> 0 -}; - -# Tracing level -# Trace verbosity level for debugging the errno -# retrieval mechanism in errno.cxx. Increase this -# value to get additional trace output. -# -cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 - # Legal values: 0 to 1 -}; - -# < -# strerror function -# This package controls the presence and behaviour of the -# strerror() function from -# -cdl_option CYGPKG_ERROR_STRERROR { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 1 - # value_source default - # Default value: 1 - # Requires: CYGBLD_ISO_STRERROR_HEADER == "" - # CYGBLD_ISO_STRERROR_HEADER == - # --> 1 -}; - -# Error package build options -# Package specific build options including control over -# compiler flags used only in building this package, -# and details of which tests are built. -# -cdl_component CYGPKG_ERROR_OPTIONS { - # There is no associated value. -}; - -# > -# Additional compiler flags -# This option modifies the set of compiler flags for -# building the error package. These flags are used in addition -# to the set of global flags. -# -cdl_option CYGPKG_ERROR_CFLAGS_ADD { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# Suppressed compiler flags -# This option modifies the set of compiler flags for -# building the error package. These flags are removed from -# the set of global flags if present. -# -cdl_option CYGPKG_ERROR_CFLAGS_REMOVE { - # Flavor: data - # No user value, uncomment the following line to provide one. - # user_value "" - # value_source default - # Default value: "" -}; - -# < -# < -# I2C driver for FSL MXC-based platforms -# -cdl_package CYGPKG_DEVS_MXC_I2C { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current -}; - -# ipu driver for mxc -# -cdl_package CYGPKG_DEVS_IMX_IPU { - # Packages cannot be added or removed, nor can their version be changed, - # simply by editing their value. Instead the appropriate configuration - # should be used to perform these actions. - - # This value cannot be modified here. - # Flavor: booldata - # Current value: 1 current - - # The following properties are affected by this value - # option CYGHWR_MX53_LCD_LOGO - # ActiveIf: CYGPKG_DEVS_IMX_IPU -}; - -# > -# IPU version 3EX support -# When this option is enabled, it indicates the IPU version -# is 3EX -# -cdl_option CYGHWR_DEVS_IPU_3_EX { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # The inferred value should not be edited directly. - inferred_value 1 - # value_source inferred - # Default value: 0 -}; - -# IPU version 3D support -# When this option is enabled, it indicates the IPU version -# is 3D -# -cdl_option CYGHWR_DEVS_IPU_3_D { - # Flavor: bool - # No user value, uncomment the following line to provide one. - # user_value 0 - # value_source default - # Default value: 0 -}; - -# < -# < - -- 2.39.5