git.karo-electronics.de Git - karo-tx-uboot.git/search

]> git.karo-electronics.de Git - karo-tx-uboot.git/search

2016-01-20	Vikas Manocha	stm32: move stm32 specific code to mach-stm32 Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: add device tree binding doc Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: support FIFO width other than 4... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: get sram size from device tree Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: move the sram partition in init Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: configure device tree for cadence qspi & flash Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: enable cadence qspi controller & spi flash Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: configure clock & pad muxing for qspi Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: remove define CONFIG_OF_SEPARATE from board... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: move OF_CONTROL config to defconfig Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: enable saving enrironment in spi flash Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-05-10	Vikas Manocha	serial: fdt: add device tree support for pl01x Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-05-10	Vikas Manocha	stv0991: use fdt for serial port platform data Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-05-10	Vikas Manocha	stv0991: fdt: add stv0991 device tree Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	dm: stv0991: Move serial to driver model Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: increase the initial ram size config Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: enable default and misc command configs Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: enable ethernet support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: Add basic stv0991 architecture support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: avoid pl01x type check two times Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: disable as per type of pl01x Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: move all line control at same place Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: fix pl011 baud rate configuration Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: pass pl01x_type to set baudrate Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2012-04-04	Vikas Manocha	net/designware: Program phy registers when auto-negotiation... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree

UBoot for KaRo TX COM modules

RSS Atom