git.karo-electronics.de Git - karo-tx-linux.git/search

]> git.karo-electronics.de Git - karo-tx-linux.git/search

2014-05-16	Fabio Estevam	ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Iain Paton	ARM: dts: imx6: add new board RIoTboard Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Iain Paton	ARM: dts: imx6: i2c4 cleanup Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Silvio Fricke	ARM: dts: imx6: edmqmx6: add vcc and vio power supplies... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: Karo TX25: use hardware ecc Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: Karo TX25: Add phy reset gpio and supply... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: Karo TX25: Add pinctrl nodes Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: i.MX25: Add IRAM node Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: i.MX25: Add mmc aliases Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx6qdl-sabresd: Add USDHC4 support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Russell King	ARM: imx: add HDMI support for SolidRun HummingBoard... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Lucas Stach	ARM: dts: imx6: edmqmx6: add SPI bus and flash Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Lucas Stach	ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx6q-udoo: Add HDMI support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Sascha Hauer	ARM: dts: Add stdout-path property to i.MX boards Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Tim Harvey	ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Tim Harvey	ARM: dts: imx: add LVDS backlight for Ventana Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Lucas Stach	ARM: dts: imx6qdl-sabresd: remove power-on gpio from... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Lucas Stach	ARM: dts: imx6: update pcie to bring in line with new... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx53-qsb-common: Add TVE support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-rdk: Add CSI enable... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx: Remove excess entries for PMIC Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-som: Disable PM pins... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-som: Fix active level... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-rdk: Remove duplicate... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Tim Harvey	ARM: dts: ventana: Add HDMI support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Marek Vasut	ARM: dts: imx6qdl-sabresd: Add PCIe support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx6qdl-wandboard: Add HDMI support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx6qdl-sabresd: Add HDMI support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Add keypad support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Add NAND support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: imx6q-gk802: Enable HDMI Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Add USB OTG support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27: Place the usb phy nodes in the board... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27: Use the correct usb clock gate Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Add PMIC support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Use predefined constants for... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Add devicetree node for I2C1 Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Sort nodes by name Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Add USB OTG regulator node Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Use predefined constants for... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Add missing pingroup for PMIC Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx51-babbage: Move "hog" pins into corresponded... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: i.MX51: Allow to define partitions onto NFC Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pbab01: Enable DVI Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pbab01: Enable UART1 Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pfla02: Add UART1 (uart3) Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pbab01: Add I2C devices Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pbab01: Add I2C2 and I2C3 Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pbab01: Set linux,stdout-path to UART4 Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pfla02: PHY reset is active-low Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: pfla02: Add GPIO LEDs Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Pass the FEC pin configuration Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Pass the UART1 pin configuration Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Keep the dt nodes sorted Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM i.MX51: Add Digi ConnectCore devicetree Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: i.MX: Use single naming style for i.MX WEIM... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Denis Carikli	ARM: dts: cpuimx51 Add touchscreen support. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Denis Carikli	ARM: dts: cpuimx35 Add touchscreen support. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Denis Carikli	ARM: dts: mbimxsd51 baseboard: Add USB support. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Stefan Agner	ARM: dts: add initial Colibri VF61 board support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Stefan Agner	of: add vendor prefix for Toradex AG Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx27-pdk: Pass the memory range Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-rdk: Add display control... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Michael Heimpold	ARM: dts: imx28-duckbill: use symbolic names from gpio.h Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Michael Heimpold	ARM: dts: imx28-duckbill: fix phy reset gpio Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Michael Heimpold	ARM: dts: imx28: include gpio.h to allow use of symbolic... Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Michael Heimpold	ARM: dts: imx28-duckbill: fix mmc settings Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx51-babbage: Add USB OTG support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx51-babbage: Add USB Host1 support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx35-pdk: Add initial device tree support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Xiubo Li	ARM: dts: vf610-twr: Enables FTM PWM device. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Xiubo Li	ARM: dts: vf610-twr: Add PWM0's pinctrl node Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Xiubo Li	ARM: dts: vf610: Add Freescale FTM PWM node. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: i.MX53: Add reset line to VPU device node Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Philipp Zabel	ARM: dts: i.MX53: Enable CODA7541 VPU Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx25-pdk: Add USB Host1 support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Alexander Shiyan	ARM: dts: imx27-phytec-phycore-rdk: Add display support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx25-pdk: Add CAN support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx25-pdk: Add keypad support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-05-16	Fabio Estevam	ARM: dts: imx25-pdk: Add audio support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Denis Carikli	ARM: dts: mbimxsd35 baseboard: Add USB support. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Denis Carikli	ARM: dts: i.MX35: Add USB support. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Denis Carikli	ARM: dts: mbimxsd25 baseboard: Add USB support Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25.dtsi: Fix USB support. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: mx35: USB block requires only one clock Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: mx25: USB block requires only one clock Signed-off-by: Shawn Guo <shawn.guo@freescale.com>	commit \| commitdiff \| tree
2014-04-30	Cosmin Stoica	ARM: dts: vf610-twr: Add support for sdhc1 Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25-pdk: Add esdhc1 support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25-pdk: Provide an Ethernet PHY reset Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25-pdk: Provide a regulator for Ethernet PHY Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25-pdk: Add FEC pins Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25-pdk: Add UART1 pins Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Fabio Estevam	ARM: dts: imx25-pdk: Sort the dt nodes Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
2014-04-30	Vincent Stehlé	ARM: dts: imx6qdl-sabresd.dtsi: Add red led Signed-off-by: Shawn Guo <shawn.guo@linaro.org>	commit \| commitdiff \| tree
next

Linux kernel for KaRo TX COM modules

RSS Atom