]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2013-05-24 Robby CaiENGR00220796-1: pxp: Add stride configuration for some...
2013-05-24 Chen LiangjunENGR00219933 CS42888: abort delay powerdown if codec...
2013-05-24 Wayne ZouENGR00221203-2 IPU Device: replace BUG macro with error...
2013-05-24 Wayne ZouENGR00221203-1 IPU Device: Avoid release resource twice...
2013-05-24 make shiENGR00221317-02 Mx6 USB host: set stop_mode_config...
2013-05-24 make shiENGR00221317-01 Mx6 USB host: set stop_mode_config...
2013-05-24 Ranjani VaidyanathanENGR00221277 MX6DL/S - Set AXI clock to 270MHz
2013-05-24 Chen LiangjunENGR00221177 ESAI ASRC: add mutex protection between...
2013-05-24 Nancy ChenENGR00221281 [MX6X] Fix BogoMIPS value is not correct
2013-05-24 Peter ChenENGR00221217 usb: device: fix usb_state incorrect probl...
2013-05-24 Robby CaiENGR00221131: imx6sl arm2/evk: add mma8450q acceleromet...
2013-05-24 Gary ZhangENGR00221214 MX6Q/DL SabreSD: avoid pop-noise on audio...
2013-05-24 Ryan QIANENGR00221185: mmc: sdhci: change info level when data...
2013-05-24 Robin GongENGR00221102-2 MX6Q: increase VPU frequence to 352Mhz
2013-05-24 Robin GongENGR00221102-1 MX6Q: increase VPU frequence to 352Mhz
2013-05-24 Peter ChenENGR00221164 usb: device: fix calling mutex at atomic...
2013-05-24 Nancy ChenENGR00220989 [MX6SL]: DDR Controller measure unit worka...
2013-05-24 Sandor YuENGR00220538 HDMI: Clock mismatch in suspend&resume...
2013-05-24 Ranjani VaidyanathanENGR00220696 [MX6SL]-Reduce IDLE mode power consumption.
2013-05-24 Wayne ZouENGR00221012 IPU: Clean up dead code
2013-05-24 Ryan QIANENGR00219601-02: mmc: sdhci: revise pre_req & post_req...
2013-05-24 Ryan QIANENGR00219601-01: mmc: queue: enlarge the size of bounce...
2013-05-24 Liu YingENGR00220734 IPUv3 fb:Rewind eof irq sync mechanism...
2013-05-24 Robin GongENGR00220776 mx6dl_arm2: ECSPI pin config overlaped...
2013-05-24 Wayne ZouENGR00220913 LDB: disable LDB DI clock when suspend
2013-05-24 Sandor YuENGR00179425 HDMI: Sometime HDMI EDID read failed
2013-05-24 make shiENGR00220833 mx6sl: USB hsic: enable mx6sl hsic function
2013-05-24 Huang ShijieENGR00220884 uart: quit the early uart console as late...
2013-05-24 Anson HuangENGR00220370 [MX6]Fix BUS freq suspend/resume fail...
2013-05-24 Rong DianENGR00220848 imx6 thermal: export thermal hot variable...
2013-05-24 Rong DianENGR00220794 imx6 thermal: add suspend and resume for...
2013-05-24 make shiENGR00218789 mx6: clock: keep PLL3 enable and power...
2013-05-24 Ranjani VaidyanathanENGR00220818 [MX6SL] - Ensure the Enable bit is set...
2013-05-24 Eric SunENGR00217687 [MX6SL_ARM2/EVK] Fix no perfmon directory
2013-05-24 Hongzhang YangENGR00220732-1 Remove clk_disable in VPU driver interru...
2013-05-24 Eric SunENGR00220567 [MX6 SABRELite] No mxs-perfmon.0 directory
2013-05-24 Lionel XuENGR00220446 ESAI: channel swapped occasionally when...
2013-05-24 Ranjani VaidyanathanENGR00220707 MX6Q/MX6DL: Fix build break due to MX6SL...
2013-05-24 Yuxi SunENGR00220706 IPU Add more timeout when wait for the...
2013-05-24 Yuxi SunENGR00220705 v4l2 overlay: Cancel the work structure...
2013-05-24 Ranjani VaidyanathanENGR00220496 MX6SL:Add low power IDLE mode optimizations.
2013-05-24 make shiENGR00220440 Mx6:USB device: clear OWIE before phy...
2013-05-24 Gary ZhangENGR00220633 WM8962: add support for wm8962 in mx6sl evk
2013-05-24 Chen LiangjunENGR00219926-2 ASRC: use PAIR B for ASRC ideal ratio...
2013-05-24 Chen LiangjunENGR00219926-1 ESAI ASRC: use ideal ratio for ASRC...
2013-05-24 Chen LiangjunENGR00220595 ESAI ASRC: add support for 'aplay *'
2013-05-24 Gary ZhangENGR00220027-2 mx6sl: add pad ctrl for audmux iomux...
2013-05-24 Gary ZhangENGR00220027-1 IOMUX: add api for special pad bits...
2013-05-24 Chen LiangjunENGR00219931 ESAI ASRC: fix channel swap bug while...
2013-05-24 Peter ChenENGR00220341-3 usb: add spin_lock at platform data
2013-05-24 Peter ChenENGR00220341-2 usb: add spin_lock_irqsave protect for...
2013-05-24 Peter ChenENGR00220341-1 usb: add spin_lock_irqsave protect for...
2013-05-24 Robby CaiENGR00220512-2: mx6sl evk: keep NVCC_1V8 and NVCC_1...
2013-05-24 Gary ZhangENGR00220512-1: mx6sl evk: change wm8962 codec 1.8V...
2013-05-24 Anson HuangENGR00220388 [MX6]Adjust SOC/PU voltage according to...
2013-05-24 Nancy ChenENGR00220497 [MX6Q, MX6DL]: Fix not able to set high...
2013-05-24 Liu YingENGR00219872-2 MX6Q SabreSD:Disable LVDS CABC function
2013-05-24 Liu YingENGR00219872-1 MX6Q Sabresd iomux:Add LVDS CABC_EN0...
2013-05-24 Robby CaiENGR00220161: imx6sl: Add EVK board Support
2013-05-24 Liu YingENGR00219859 MXC V4L2 capture:Pwr down/on opened cam
2013-05-24 Xinyu ChenENGR00219856-2 mxc pwm: do pwm software reset after...
2013-05-24 Xinyu ChenENGR00219856-1 mx6q sabresd: add debounce to gpio key
2013-05-24 Yuxi SunENGR00220176 sabrelite ov5642: Fix ov5642 probe fail
2013-05-24 Sandor YuENGR00180117 HDMI: No audio output in 1080P on some TV
2013-05-24 Nancy ChenENGR00220297 [MX6SL]: Fix AHB clock not correct after...
2013-05-24 Rong DianENGR00219898 imx6 battery: fix coulomb data for power...
2013-05-24 Robin GongENGR00220340 mx6sl pfuze: keep NVCC_1V8 and NVCC_1...
2013-05-24 Richard LiuENGR00220199 Add CPU governor trigger for GPU2D and...
2013-05-24 Fugang DuanENGR00217918 - mx6 cpufreq : Add on-demand governor...
2013-05-24 Yuxi SunENGR00219173 V42L overlay Add back ground overlay support
2013-05-24 Wayne ZouENGR00216786-3 V4L2 output: Allocate DMA buffer from...
2013-05-24 Wayne ZouENGR00216786-2 IPU/FB: Allocate DMA buffer from DMA...
2013-05-24 Wayne ZouENGR00216786-1 IPU: Allocate DMA buffer from DMA zone.
2013-05-24 Chen LiangjunENGR00220172 ESAI ASRC: put all asrc pair release opera...
2013-05-24 Chen LiangjunENGR00220181-2 HDMI SDMA: workround for HDMI SDMA audio...
2013-05-24 Chen LiangjunENGR00220181-1 DMA: remove noncacheable memory allocati...
2013-05-24 Robby CaiENGR00220169: imx6: Fix build break when make modules
2013-05-24 Robin GongENGR00220154 GPT mx6: move mx6_timer_rate to clock.c
2013-05-24 Robin GongENGR00220153 cpufreq mx6: new cpu set point and add...
2013-05-24 Steve CorneliusENGR00216259 caam: improve RNG4 initialization process
2013-05-24 Anson HuangENGR00220155 [MX6]Support DSM mode on DL's TO1.1
2013-05-24 Anson HuangENGR00220022 [MX6]Add necessary protection to bus freq...
2013-05-24 Anson HuangENGR00219870 [MX6]Add interrupt check to idle to minish...
2013-05-24 Yuxi SunENGR00220038-2 fix Kconifg waring
2013-05-24 Yuxi SunENGR00220038-1 build config: update default build config
2013-05-24 Fugang DuanENGR00180288 - FEC : Fix kernel dump about eth0
2013-05-24 Wayne ZouENGR00220011-2 IPU: Show video to DP/fb0 when bootup...
2013-05-24 Wayne ZouENGR00220011-1 Revert ENGR00212529 show video to fb0...
2013-05-24 Zhang JiejingENGR00212489-1 viv_GPU: add reserved memory account...
2013-05-24 Yuxi SunENGR00219397-2 v4l2 overlay: make ipu device processing...
2013-05-24 Yuxi SunENGR00219397-1 v4l2 overlay: Add foreground overlay...
2013-05-24 Sandor YuENGR00215952 HDMI:'PHY PLL not locked' messages during...
2013-05-24 Chen LiangjunENGR00219837-4 HDMI SabreAuto: Add HDMI_SDMA support...
2013-05-24 Chen LiangjunENGR00219837-3 HDMI SabreSD: Add HDMI_SDMA support...
2013-05-24 Chen LiangjunENGR00219837-2 HDMI ARM2: Add HDMI_SDMA support for...
2013-05-24 Chen LiangjunENGR00219837-1 HDMI: Add HDMI_SDMA support for RIGEL...
2013-05-24 Hongzhang YangENGR00217946 VPU kernel driver: fix suspend/resume...
2013-05-24 Fugang DuanENGR00219501 - FEC : Enable puase frame flow
2013-05-24 Chen LiangjunENGR00219595 MX6Q ARM2: Add init data for P2P playback
2013-05-24 Anson HuangENGR00219024 [EPDC]Fix EPDC resume failure.
next