]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2015-01-16 Anson Huangcpufreq: interactive: fix internal_create_group failure
2015-01-16 Anson Huangcpufreq: add interactive governor support
2015-01-16 Todd PoynorARM: Call idle notifiers
2015-01-16 Todd PoynorMove x86_64 idle notifiers to generic
2015-01-16 Huang ShijieENGR00381674 ARM: imx_v7_defconfig: enable the SPI...
2015-01-16 Brian Norrismtd: spi-nor: allow to be built as module
2015-01-16 Brian Norrismtd: spi-nor: shorten Kconfig naming
2015-01-16 Brian Norrismtd: nand_bbt: remove unused variable
2015-01-16 Brian Norrismtd: nand_bbt: handle error case for nand_create_badblo...
2015-01-16 Huang Shijiemtd: nand: add support for SanDisk SDTNRGAMA-008G
2015-01-16 Ezequiel Garciamtd: nand: Warn the user if the selected ECC strength...
2015-01-16 Ron LeeNAND_ECC_SOFT_BCH can support subpage reads too
2015-01-16 Masahiro Yamadamtd: nand: fix a typo in a comment line
2015-01-16 Ronmtd: nand: use the nand_read_subpage index everywhere
2015-01-16 RonFix index regression in nand_read_subpage
2015-01-16 Erico Nunesmtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
2015-01-16 Cai Zhiyongmtd: nand: remove unused function input parameter
2015-01-16 Huang Shijiemtd: nand: print out the right information for JEDEC...
2015-01-16 Kamal Dasumtd: nand: Add support to use nand_base poi databuf...
2015-01-16 Brian Norrismtd: nand: refactor erase_cmd() to return chip status
2015-01-16 David Mosbergermtd: nand: fix GET/SET_FEATURES address on 16-bit devices
2015-01-16 Huang Shijiemtd: nand: parse out the JEDEC compliant NAND
2015-01-16 Huang Shijiemtd: nand: add a helper to get the supported features...
2015-01-16 Huang Shijiemtd: nand: add fields for JEDEC in nand_chip
2015-01-16 Huang Shijiemtd: nand: add the data structures for JEDEC parameter...
2015-01-16 Huang Shijiemtd: nand: remove the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE
2015-01-16 Boris BREZILLONmtd: nand: fix erroneous read_buf call in nand_write_pa...
2015-01-16 Brian Norrismtd: nand: don't use read_buf for 8-bit ONFI transfers
2015-01-16 Brian Norrismtd: nand: force NAND_CMD_READID onto 8-bit bus
2015-01-16 Huang Shijiemtd: nand: kill the the NAND_MAX_PAGESIZE/NAND_MAX_OOBS...
2015-01-16 Shawn GuoENGR00317981: ARM: remove DEBUG_LL from imx_v7_defconfig
2015-01-16 Shawn GuoENGR00317981: ARM: enable SOC_IMX6SX in imx_v7_defconfig
2015-01-16 Shawn GuoENGR00317981: ARM: dts: imx6sx: tempmon is not compatia...
2015-01-16 Shawn GuoARM: dts: imx: add initial imx6sx-sdb board support
2015-01-16 Shawn GuoARM: dts: imx: add initial imx6sx device tree source
2015-01-16 Shawn GuoARM: dts: imx: add pin function header for imx6sx
2015-01-16 Shawn GuoARM: imx: add basic imx6sx SoC support
2015-01-16 Anson HuangARM: imx: add clock driver for imx6sx
2015-01-16 Shawn GuoARM: imx: add low-level debug support for imx6sx
2015-01-16 Anson Huangpinctrl: add pinctrl driver for imx6sx
2015-01-16 Gilles ChanteperdrixARM: imx: factor device tree timer initialization
2015-01-16 Huang ShijieENGR00300890-1 mtd: fix the build error
2015-01-16 Huang Shijieserial: imx: disable the receiver ready interrupt for...
2015-01-16 Huang Shijieserial: imx: remove the redundant code
2015-01-16 Huang Shijieserial: imx: reset the uart port all the time
2015-01-16 Fabio Estevamserial: imx: Disable new features of autobaud detection
2015-01-16 Alexander Shiyanserial: imx: Remove init() and exit() platform callbacks
2015-01-16 Alexander Shiyanserial: imx: Use dev_name() for request_irq() to distin...
2015-01-16 Alexander Shiyanserial: imx: Use devm_ioremap_resource()
2015-01-16 Huang Shijieserial: imx: always wake up the processes in the TX...
2015-01-16 Huang ShijieARM: clk: imx: remove the CLK_SET_RATE_NO_REPARENT...
2015-01-16 Huang Shijiemtd: nand: add "page" argument for read_subpage hook
2015-01-16 Huang Shijiemtd: gpmi: add gpmi support for imx6sx
2015-01-16 Huang Shijiemtd: gpmi: add gpmi_devdata{} to simplify the code
2015-01-16 Huang Shijiemtd: gpmi: add subpage read support
2015-01-16 Huang Shijiemtd: gpmi: do not use the mtd->writesize
2015-01-16 Brian NorrisARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependenc...
2015-01-16 Brian NorrisDocumentation: spi-nor: rewrite some portions
2015-01-16 Geert Uytterhoevenmtd: spi-nor: Enable Dual and Quad SPI read transfers...
2015-01-16 Brian Norrismtd: spi-nor: unify read opcode variants with ST SPI FSM
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Huang Shijiemtd: spi-nor: add the copyright information
2015-01-16 Brian Norrismtd: spi-nor: EXPORT symbols which could be used by...
2015-01-16 Brian Norrismtd: fsl-quadspi: fix __iomem annotations
2015-01-16 Brian Norrismtd: spi-nor: unify read opcode variants with ST SPI FSM
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Brian Norrismtd: spi-nor: unify read opcode variants with ST SPI FSM
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Brian Norrismtd: spi-nor: drop \t after #define
2015-01-16 Huang Shijiemtd: spi-nor: Add Freescale QuadSPI driver
2015-01-16 Huang ShijieDocumentation: add the binding file for Freescale QuadS...
2015-01-16 Huang Shijiemtd: spi-nor: add a helper to find the spi_device_id
2015-01-16 Huang ShijieDocumentation: add the document for the SPI NOR framework
2015-01-16 Huang Shijiemtd: spi-nor: add the framework for SPI NOR
2015-01-16 Huang Shijiemtd: spi-nor: add the basic data structures
2015-01-16 Huang Shijiemtd: spi-nor: copy the SPI NOR commands to a new header...
2015-01-16 Geert Uytterhoevenmtd: m25p80: Revive dual read support
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Brian Norrismtd: m25p80: use the SPI nor framework
2015-01-16 Brian Norrismtd: m25p80: add Macronix mx66l1g55g 1Gbit SPI flash
2015-01-16 Kuninori Morimotomtd: m25p80: add support for the Spansion s25fl008k...
2015-01-16 Axel Linmtd: m25p80: Use positive logic to check JEDEC ID
2015-01-16 Paul Gortmakermtd: delete non-required instances of include <linux...
2015-01-16 Geert Uytterhoevenmtd: m25p80: Enable Dual SPI read transfers for s25fl25...
2015-01-16 Geert Uytterhoevenmtd: m25p80: Add dual read support
2015-01-16 Shawn GuoENGR00269945: ARM: dts: add max7310 support for imx6qdl...
2015-01-16 Shawn GuoENGR00269945: pinctrl: support pinctrl setting assertio...
2015-01-16 Shawn GuoENGR00269945: gpio: pca953x: add device_reset() call
2015-01-16 Shawn GuoENGR00269945: select ARCH_HAS_RESET_CONTROLLER for IMX
2015-01-16 Shawn GuoENGR00269945: reset: add dummy device_reset() for ...
2015-01-16 Shawn GuoENGR00269945: reset: build in CONFIG_RESET_GPIO by...
2015-01-16 Shawn GuoENGR00269945: reset: register gpio-reset driver in...
2015-01-16 Philipp Zabelreset: Add driver for gpio-controlled reset pins
2015-01-16 Shawn GuoENGR00317981: ARM: add imx_v7_defconfig
2015-01-16 Shawn GuoENGR00240988: ARM: dts: add gpu nodes for imx6q and...
2015-01-16 Shawn GuoENGR00240988: ARM: imx6q: add dma_zone_size for GPU...
2015-01-16 Loren HUANGENGR00240988: ARM: imx6q: add gpu clock initialzatin...
2015-01-16 Shawn GuoENGR00317981: gpu-viv: use runtime pm for VDDPU management
2015-01-16 Philipp ZabelARM: dts: imx6qdl: Allow disabling the PU regulator...
2015-01-16 Philipp ZabelARM: dts: imx6sl: Add power-domain information to gpc...
next