]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2011-04-29 Mingkai Hupowerpc: eSPI and eSPI controller support
2011-04-29 Andy Flemingtsec: Fix MDIO on devices with eTSEC2
2011-04-29 Kumar Galapowerpc/85xx: Change timebase divisor to be defined...
2011-04-29 Timur Tabipowerpc/85xx: Implement work-around for P4080 erratum...
2011-04-29 Timur Tabipowerpc/85xx: Extend SERDES9 erratum work-around to...
2011-04-29 Timur Tabipowerpc/85xx: Display SERDES 8 erratum warning if banks...
2011-04-29 Timur Tabipowerpc/85xx: Implement work-around for P4080 erratum...
2011-04-29 Timur Tabipowerpc/fsl: add 'pixis_reset dump' command
2011-04-29 Timur Tabipowerpc/86xx: remove empty board_early_init_f()
2011-04-28 Matthew McClintockpowerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI...
2011-04-28 Kim Phillipspowerpc/85xx: handle both "secX.Y" and "sec-vX.Y" prope...
2011-04-28 Lei Xupowerpc/85xx: Enable ESDHC111 erratum on P2040/P3041...
2011-04-28 Roy Zangpowerpc/85xx: Enable Internal USB PHY for p2040, p3041...
2011-04-28 Kumar Galapowerpc: Add P3041DS/P5020DS board support (uses corene...
2011-04-28 Emil Medvep4080/serdes: Implement the XAUI workaround for SERDES9...
2011-04-28 Emil Medvepowerpc/85xx: fsl_corenet_serdes code rework
2011-04-28 Trübenbach... powerpc/85xx: Fix Wrong PCIe 3 virtual address on coren...
2011-04-28 Haiying Wangpowerpc/85xx: Add device tree fixup for bman portal
2011-04-28 Ramneek Mehreshpowerpc/85xx: Add support for 2nd USB controller on...
2011-04-28 Dipen Dudhatpowerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for...
2011-04-28 Dipen Dudhatpowerpc/85xx: Change CS timing params before changing...
2011-04-28 Priyanka Jainpowerpc/85xx: Add support to save environment in SD...
2011-04-27 Kim Phillipscommon: add a grepenv command
2011-04-27 Timur Tabipowerpc: fix implementation of out_8 to match the other...
2011-04-27 Kim Phillipsenv: fix env var autocompletion
2011-04-27 Heiko Schochermpc52xx, digsy_mtc: protect default flash sectors
2011-04-27 Heiko Schochermpc52xx, digsy_mtc: change phy addr for rev5 boards.
2011-04-27 Gray RemlinNET: Correct potential missing goto label in case state...
2011-04-27 thomas.langer... fix redundant environment for serial flash
2011-04-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2011-04-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-fdt
2011-04-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-blackfin
2011-04-27 Wolfgang DenkMerge branch 'spi' of git://git.denx.de/u-boot-blackfin
2011-04-27 Minkyu KangDon't grab memory for LCD if FB address is defined
2011-04-27 Alessandro... nhk8815: move config targets from Makefile to boards.cfg
2011-04-27 Alessandro... nhk8815: add support for relocation
2011-04-27 Alessandro... nhk8815: remove platform.S, which was unused at link...
2011-04-27 Eric Benardcpuat91: fix board support
2011-04-27 Macpaul Linftsmc020: move ftsmc020 static mem controller to driver/mtd
2011-04-27 Macpaul Linftsdmc020: move ftsdmc020.h to include/faraday
2011-04-27 Eric Benardcpu9260: update board support
2011-04-27 Sughosh GanuFix the issue of _end symbol not being found while...
2011-04-27 Luca CeresoliARMV7: OMAP3: Add support for Comelit DIG297 board
2011-04-27 Luca CeresoliARMV7: OMAP3: Cleanup extern variables in mem.c
2011-04-27 Tom Warrenarm: Tegra2: Move clk/mux init to board_early_init_f...
2011-04-27 Tom Warrenarm: Tegra2: GPIO: Add basic GPIO definitions
2011-04-27 Tom Warrenarm: Tegra2: Add missing PLLX init
2011-04-27 Eric CooperARM: fix stack pointer adjustment in board_init_f()
2011-04-27 Tom Warrenarm: Tegra2: add support for A9 CPU init
2011-04-27 Luca CeresoliARMV7: OMAP3: Add GPMC_CONFIGx register value definitions
2011-04-27 Luca CeresoliARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX
2011-04-27 Alexander Holleromap3_beagle: enable EHCI and USB storage.
2011-04-27 Alexander HollerOMAP3: Add support for DPLL5 (usbhost)
2011-04-27 Alexander HollerOMAP3: Change some USB related MUX values
2011-04-27 Enric Balletbo... ARM: OMAP3: Revamp IGEP module default configuration
2011-04-27 Enric Balletbo... ARM: OMAP3: Revamp IGEP v2 default
2011-04-27 Albert ARIBAUDReplace obsolete e-mail address
2011-04-27 Macpaul Lina320evb: fix include path of timer fttmr010
2011-04-27 Macpaul Linfttmr010: move fttmr010 header to include/faraday
2011-04-27 Macpaul Linftpmu010.h: add asm support used by lowlevel_init
2011-04-27 Macpaul Linftpmu010: fix relocation and enhance features
2011-04-27 Rogan DawesOrion5x: Correct DRAM bank detection
2011-04-27 Lei WenI2C: add i2c support for Armada100 platform
2011-04-27 Lei WenI2C: mv_i2c: add multi bus support
2011-04-27 Lei WenI2C: add i2c support for Pantheon platform
2011-04-27 Lei Wenmv_i2c: use structure to replace the direclty define
2011-04-27 Lei Wenmv_i2c: fix timeout value to be consistent with comments
2011-04-27 Lei Wenpxa: move i2c driver to the common place
2011-04-27 Fabio EstevamMX25: tx25: Add _end section on nand_spl
2011-04-27 Stefano BabicMX31: mx31pdk: fix nand_spl
2011-04-27 Matt WaddelARMV7: Vexpress: Remove config.mk
2011-04-27 Po-Yu Chuangarm: a320: use new ftpmu010 API
2011-04-27 Po-Yu Chuangpower: ftpmu010: move drivers/power/ftpmu010.h to inclu...
2011-04-27 Matthias Weisserarm: Use optimized memcpy and memset from linux
2011-04-27 Igor GrinbergOMAP3: CM-T35: Add support for CM-T3730
2011-04-27 Igor GrinbergOMAP3: CM-T35: enable the green LED
2011-04-27 Igor GrinbergOMAP3: CM-T35: remove redundand i2c initialization
2011-04-27 Igor GrinbergOMAP3: CM-T35: fix mmc
2011-04-27 Igor GrinbergOMAP3: CM-T35: add MMC1 pinmux
2011-04-27 Igor GrinbergOMAP3: CM-T35: update MAINTAINERS file
2011-04-27 Igor GrinbergOMAP3: CM-T35: update board files header information
2011-04-27 Igor GrinbergOMAP3: CM-T35: update config
2011-04-27 Igor GrinbergOMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file...
2011-04-27 SrinathARMV7: AM3517/05: Add support for CraneBoard.
2011-04-27 Koen KooiOMAP3: BeagleBoard: add more expansionboard IDs
2011-04-27 Koen KooiOMAP3: BeagleBoard: add xM rev B to ID table
2011-04-27 Steve KipiszOMAP3: BeagleBoard: Enable pullups on i2c2.
2011-04-27 Alexander Holleromap3_beagle: enable the use of a plain text file
2011-04-27 Jason KridnerBeagleBoard: Added LED driver
2011-04-27 Jason KridnerAdd 'led' command
2011-04-27 Stefano BabicMX31: drop warnings in get_cpu_rev
2011-04-27 Jason LiuMX5: factor out boot cause funciton to common code
2011-04-27 Fabio EstevamARM: MX31: Fix file name label
2011-04-27 Fabio EstevamMX31: mx31pdk: Make the board name simpler.
2011-04-27 Fabio EstevamMX31: Introduce get_reset_cause()
2011-04-27 Fabio EstevamARM: mx31: Print the silicon version
2011-04-27 Stefano BabicIMX: MX31: Cleanup include files and drop nasty #ifdef...
2011-04-27 Liu Hui-R64343MX5: Enable flat-device-tree support on mx51/53 evk...
2011-04-27 Liu Hui-R64343MX53: drop config.mk from mx53evk
2011-04-27 Fabio Estevammx25: Make the UART port number explicit in its setup...
next