]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2013-05-24 Ranjani VaidyanathanENGR00155958: MX6: Fix bug in setting parent of periph_clk
2013-05-24 Tony LinENGR00155912 [mx6q]clock: correct pll disable function
2013-05-24 Tony LinENGR00155893 [mx6q]clock: correct set parent function
2013-05-24 Tony LinENGR00155890 [mx6q] code clean up
2013-05-24 Alan TullENGR00155845-2 mfd for hdmi
2013-05-24 Alan TullENGR00155845-1 mfd for hdmi
2013-05-24 Ranjani VaidyanathanENGR00155715: MX6: Fix warnings is clock and cpufreq...
2013-05-24 Peter ChenENGR00155761 usb-host: fix the buiild warning with...
2013-05-24 Peter ChenENGR00155764 usb-host: fix the system hang when access...
2013-05-24 Anson HuangENGR00155759 [MX6]MMDC clock should be always on
2013-05-24 Anson HuangENGR00155731 [MX6]clock disable should function
2013-05-24 Tony LinENGR00155612-4 [mx6q]change the delay after clock frequ...
2013-05-24 Tony LinENGR00155612-3 [mx6q]add delay after cmd6 for eMMC...
2013-05-24 Tony LinENGR00155612-2 [mx6q]dynamically sd pad setting change
2013-05-24 Tony LinENGR00155612-1 [mx6q]dynamically sd pad setting change
2013-05-24 Ming Leiusb: ehci: make HC see up-to-date qh/qtd descriptor...
2013-05-24 Anson HuangENGR00155627 [MX6]Add thermal cooling device
2013-05-24 Anson HuangENGR00155627-1 [MX6]Add thermal cooling devie
2013-05-24 Anson HuangENGR00155718 [MX6]CPUs hotplug sometimes fail
2013-05-24 Tony LinENGR00155611 [mx6q]correct eMMC DDR mode clock setting
2013-05-24 Ranjani VaidyanathanENGR00139280: MX6: Add CPUFREQ support
2013-05-24 Frank LiENGR00153925 MX6Q: Fix EGA touch failure on lvds2 port
2013-05-24 Lionel XuENGR00139255 MX6Q_BSP ESAI: Add esai recording support
2013-05-24 Peter ChenENGR00155396 usb-host: fix below build warning
2013-05-24 Lionel XuENGR00139255-2 MX6Q_BSP ESAI: Add esai recording support
2013-05-24 Lionel XuENGR00139255-1 MX6Q_BSP ESAI: Add esai recording support
2013-05-24 Jason ChenENGR00155151 imx6q clock: fix ldb and ipu-di clock...
2013-05-24 Jason ChenENGR00154080 ipuv3: fix clear buffer function
2013-05-24 Jason ChenENGR00155145 ipuv3 disp pos: restore pos setting after...
2013-05-24 Jason ChenENGR00153474 ipuv3 split mode: vf and enc task display...
2013-05-24 Jason ChenENGR00155141 ipuv3 split mode: adjust split calculate...
2013-05-24 Sammy HeENGR00155464 mx6q: Change default DMA size to 184M
2013-05-24 Tony LinENGR00155400 [ath6kl]build warning
2013-05-24 Anson HuangENGR00155401 [MX6]Fix ipu ccm_ccgr index error
2013-05-24 Tony LinENGR00153895 [MX6Q]SD: SD3 clock is not off, when no...
2013-05-24 Anson HuangENGR00155391-2 [MX6]Clean up build warning
2013-05-24 Anson HuangENGR00155391-1 [MX6]Clean up build warning
2013-05-24 Richard ZhaoENGR00155355 imx6: clk: add gpu axi clock to secondary...
2013-05-24 Tony LinENGR00155288 [mx6q]sd dat1 glitch causes system panic
2013-05-24 Anson HuangENGR00155219 [MX6]Add protection for dormant mode
2013-05-24 Tony LinENGR00139260-3 [mx6q]add wifi driver to default config
2013-05-24 Tony LinENGR00139260-2 [ath6k wifi]add some delay after resuming
2013-05-24 Tony LinENGR00139260-1 [ath6k wifi]remove drivers under drivers...
2013-05-24 Terry LvENGR00155179-2: Change imx_viim to mxs_viim.
2013-05-24 Terry LvENGR00155179-1: Change imx_viim to mxs_viim
2013-05-24 Ranjani VaidyanathanENGR00154748: MX5x: Add CPUFREQ and DVFS support to...
2013-05-24 Gary ZhangENGR00154650-2 ESAI: add mx53 playback/record support
2013-05-24 Gary ZhangENGR00154650-1 [MX53_ARD] ESAI: add ESAI device
2013-05-24 Anson HuangENGR00154983 [MX6]Enet clock enable wrong
2013-05-24 Jason ChenENGR00154981 ipuv3: fix clock issue
2013-05-24 Anson HuangENGR00154961 [MX6]system hang in suspend with irq
2013-05-24 Lily ZhangENGR00153887 mx53 ard: add display support
2013-05-24 Anson HuangENGR00154931 [MX6]L2 cache init wrong after resume
2013-05-24 Anson HuangENGR00154922 [MX6]Disable some clocks during boot
2013-05-24 Anson HuangENGR00154917 [MX6]Enable MMDC low-power mode
2013-05-24 Terry LvENGR00154889-2: Add virtual iim driver
2013-05-24 Terry LvENGR00154889-1: Add virtual iim driver to imx5 and...
2013-05-24 Tony LinENGR00154890 [MX6Q]suspend/resume restore GPIO interrup...
2013-05-24 Lionel XuENGR00154727 ESAI: Resolve i2c access problem when...
2013-05-24 Tony LinENGR00139261 [MX6Q]support 8 bit MMC and eMMC DDR mode
2013-05-24 Tony LinENGR00139261-1 [esdhc]add 8 bit mode support para in...
2013-05-24 Peter ChenENGR00154704 usb-gadget: wmb is needed after dtd pointe...
2013-05-24 Peter ChenENGR00154703 usb-gadget: fix spin_lock recursion proble...
2013-05-24 Anson HuangENGR00154705 [MX6Q]suspend/resume sometimes hang
2013-05-24 Peter ChenENGR00154382 usb-udc: Set fsl arc usb driver as default...
2013-05-24 Anson HuangENGR00154648 [Mx6]SMP hotplug sometimes hang
2013-05-24 Richard ZhaoENGR00154647 mxc: viv-gpu: squash gpu devices
2013-05-24 Jason ChenENGR00154437 mxc edid: add cea extend revision 1 and...
2013-05-24 Zeng ZhaomingENGR00154526 MX5x, SSI: audio capture not supported
2013-05-24 Zeng ZhaomingENGR00154525 SDMA: SDMA not works when event number...
2013-05-24 Huang ShijieENGR00139247-6 DMA : add DMA support for imx6q
2013-05-24 Huang ShijieENGR00139247-5 ARM: add APBH-DMA device for imx6Q
2013-05-24 Huang ShijieENGR00139247-4 ARM: add APBH-DMA arch code for imx6q
2013-05-24 Huang ShijieENGR00139247-3 MTD : add GPMI driver for IMX6Q
2013-05-24 Huang ShijieENGR00139247-2 MX6Q: add GPMI device
2013-05-24 Huang ShijieENGR00139247-1 MX6Q: add arch support for GPMI
2013-05-24 Danny NoldENGR00154431 - MXCFB_SET_WAVEFORMS ioctl broken
2013-05-24 Richard ZhaoENGR00154429 rtc-snvs: request_irq too early
2013-05-24 Jason ChenENGR00154108-3 mxc ldb: make ldb support two ipu in...
2013-05-24 Jason ChenENGR00154108-2 imx6q MSL: make ldb support two ipu...
2013-05-24 Jason ChenENGR00154108-1 fsl_devices.h: make ldb support two...
2013-05-24 Zeng ZhaomingENGR00154346 UART: fix uart deadlock
2013-05-24 Jason ChenENGR00154135 sii902x hdmi: should not init twice
2013-05-24 Anish TrivediENGR00154209 SNVS RTC: Update comments for errata number
2013-05-24 Tony LinENGR00154217 [MX6Q/D]fix mmc suspend/resume issue.
2013-05-24 Jason ChenENGR00154132 ipuv3 fb: add fb unblank event after set var
2013-05-24 Anson HuangENGR00154211 [MX6]Add workaround for wdog errata
2013-05-24 Anson HuangENGR00154056-3 [MX6]Enable dormant mode
2013-05-24 Anson HuangENGR00154056-2 [MX6]Enable dormant mode in suspend
2013-05-24 Anson HuangENGR00154056-1 [MX6]Enable dormant mode
2013-05-24 Jason ChenENGR00154051 mx6q clk: set default ipu di clock parent...
2013-05-24 Tony LinENGR00153856 [mx6q]platform data is not correctly initi...
2013-05-24 Sammy HeENGR00153830-2 vpu: Add VPU_IOC_REQ_VSHARE_MEM ioctl...
2013-05-24 Sammy HeENGR00153830-1 vpu: Add new VPU_IOC_REQ_VSHARE_MEM...
2013-05-24 Ranjani VaidyanathanENGR00153913: MX6x - Fix bug in set_parent and set_rate...
2013-05-24 Jason ChenENGR00153785 ipuv3: use ipu internal divider for extern...
2013-05-24 Richard ZhaoENGR00153825 imx6: clk: fix gpu clock issues
2013-05-24 Lionel XuENGR00153793-2 ESAI: add function get_rate to clk pll3_...
2013-05-24 Lionel XuENGR00153793-1 ESAI: Resolve esai codec i2c suspend...
2013-05-24 Dong AishengENGR00153740-7 imx6: add asrc in defconfig
next