]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-09-08 Masahiro YamadaARM: UniPhier: replace <asm/io.h> with <linux/io.h>
2015-09-08 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun8i
2015-09-08 Chen-Yu TsaiARM: sunxi: Share sun6i PSCI backend with sun8i
2015-09-08 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun6i
2015-09-08 Chen-Yu TsaiARM: sunxi: Add sun6i specific PSCI implementation
2015-09-08 Chen-Yu TsaiARM: sunxi: Make PSCI code sun7i specific
2015-09-08 Chen-Yu TsaiARM: sunxi: Document registers in PSCI code
2015-09-08 Daniel Kochmańskisunxi/nand: Add support to the SPL for loading u-boot...
2015-09-08 Roy Splietsunxi: Match sun4i, sun6i, sun9i CCI definitions for...
2015-09-08 Roy Splietsunxi: Add DMA definitions
2015-09-08 Daniel Kochmańskisunxi/nand: change BLOCK_SIZE in mksunxiboot to match...
2015-09-08 Hans de Goedesun9i: Add Merrii_A80_Optimus board / defconfig file
2015-09-08 Hans de Goedesun9i: Basic sun9i (A80) support
2015-09-08 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-09-08 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-09-08 Hans de Goedesunxi: Remove support for building "old-fashioned"...
2015-09-08 Hans de Goedesunxi: Use axp221 sid on a33
2015-09-08 Hans de Goedeusb: kbd: Fix key repeat not always working
2015-09-08 Peter Griffinusb: dwc2: Add support for v3 snpsid value
2015-09-08 Siva Durga... ci_udc: Update the ci_udc driver to support bulk transfers
2015-09-08 Hans de Goedeusb: Remove unused variable in usb_setup_descriptor()
2015-09-08 Hannes Schmelzercosmetic: change Author/MAINTAINER Name from Petermaier...
2015-09-08 Heiko Schocheram33xx, spl, siemens: enable debug uart output again
2015-09-08 Joe Hershbergernet: Fix a warning added by 76ec988
2015-09-08 Tang Yuantianfsl/sata: Replace sprintf() with snprintf()
2015-09-08 Matt Portergpio: stm32: add stm32f1 support
2015-09-08 Matt PorterARMv7M: add STM32F1 support
2015-09-08 Matt Portercommon/cmd_boot: keep ARM v7M in thumb mode during...
2015-09-08 Matt Porterimage: fix build when CONFIG_NR_DRAM_BANKS is disabled...
2015-09-08 Marek VasutARM: bcm283x: Switch to generic timer
2015-09-08 Marek VasutARM: bcm283x: Reorder timer.h
2015-09-08 Marek VasutARM: bcm283x: Repair wdog.h
2015-09-08 Linus Walleijvexpress64: use uncompressed kernel by default
2015-09-08 Masahiro Yamadakbuild: define DO_DEPS_ONLY for u-boot.cfg to fix build...
2015-09-08 Andrew Bradfordmeminfo cmd: Enable printing >=4GiB SDRAM sizes
2015-09-08 Paul Kocialkowskispl: spl_mmc: Error and count distinction
2015-09-08 Karl Apsiteadd test for two 'loadables'
2015-09-08 Karl ApsiteCombine bootm_find_<thing> functions together
2015-09-08 Karl Apsiteadd boot_get_loadables() to load listed images
2015-09-08 Karl Apsitemkimage will now report information about loadable
2015-09-08 Masahiro Yamadapowerpc: gitignore: ignore PowerPC DTBs
2015-09-08 Thomas Petazzonitools: use pkg-config when available to get SSL flags
2015-09-08 Masahiro Yamadainclude: introduce include/linux/io.h as a wrapper...
2015-09-08 Linus Walleijvexpress64: let Juno wait for root device
2015-09-08 Evgeniy Dushistovbeagle-xm: gpio_63 fix wrong pin initialization
2015-09-08 Ricardo Ribaldappc: xilinx-ppc: Move to generic board support
2015-09-08 Fabio Estevamwarp: Fix the 'saveenv' command
2015-09-08 Fabio Estevamwarp: Add fuse command support
2015-09-08 Fabio Estevamwarp: Enable CONFIG_SUPPORT_EMMC_BOOT
2015-09-08 Fabio Estevamwarp: Fix CONFIG_SYS_FSL_ESDHC_ADDR
2015-09-08 Fabio Estevamwarp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE
2015-09-08 Tim Harveypci: imx: display message if no pcie link
2015-09-08 Stefano BabicRevert "imx: drop warning: unused variable 'max_freq'"
2015-09-08 Ricardo Ribaldadoc/README.generic-board: Trivial spell check
2015-09-08 Linus Walleijvexpress64: fix various memory issues
2015-09-08 Chris PackhamMakefile: Add U_BOOT_TZ and include in version
2015-09-08 Tim Harveypci: display header for bus scan
2015-09-08 Tim Harveyenv_mmc: add error message to pass to set_default_env
2015-09-08 Ryan Harkinvexpress64: specify CONFIG_SYS_FLASH_CFI_WIDTH
2015-09-08 Lokesh VutlaARM: BeagleBoard-x15: Rev A2x5: Change UART3 mux
2015-09-08 Tuomas Tynkkynenmenu: Return an error code if Ctrl-C is pressed
2015-09-08 Tuomas Tynkkynenpxe: Fix crash if 'sysboot' is run without args
2015-09-08 Tom RiniRevert "Revert "stm32f4: fix serial output""
2015-09-08 Stefano Babicimx: drop warning: unused variable 'max_freq'
2015-09-08 Joe Hershbergermoveconfig: Print status about the processed defconfigs
2015-09-08 Joe Hershbergermoveconfig: Add a switch to enable printing errors
2015-09-08 Joe Hershbergermoveconfig: Print a message for missing compiler
2015-09-08 Joe Hershbergermoveconfig: Output a list of failed boards
2015-09-08 Joe Hershbergermoveconfig: Cleanup headers in arch and board
2015-09-08 Joe Hershbergermoveconfig: Add a switch to only cleanup headers
2015-09-08 Joe Hershbergermoveconfig: Add a parameter to accept a list to build
2015-09-08 Joe Hershbergermoveconfig: Ignore duplicate configs when moving
2015-09-08 Joe Hershbergermoveconfig: Always run savedefconfig on the moved config
2015-09-08 Masahiro Yamadatools: moveconfig: a tool to move CONFIGs from headers...
2015-09-08 Peter Robinsonmx6: standardise CONFIG_CMD_CACHE
2015-09-08 Peter Robinsonimx6: generic MMC config options to mx6_common
2015-09-08 Peter Robinsonimx6: standardise filesystem and boot options
2015-09-08 Peter Robinsonimx6: move generic miscellaneous and overwrite options
2015-09-08 Peter Robinsonimx6: centralise common boot options in mx6_common.h
2015-09-08 Peter Robinsonimx6: move MXC_GPIO define to mx6_common.h
2015-09-08 Peter Robinsonimx6: move standard ATAG configs to mx6_common.h
2015-09-08 Peter Robinsonimx6: move generic imx6 options to mx6_common.h
2015-09-08 Peter Robinsonimx6: move all standard includes to mx6_common.h
2015-09-08 Peter Robinsonnovena: standardise mx6_common.h include
2015-09-08 Tim Harveyspl: spl_mmc: fix mmc Falcon mode regression
2015-09-08 Tim Harveyimx: ventana: update README with Falcon mode documentation
2015-09-08 Tim Harveyimx: ventana: update README for micro-SD boot medium
2015-09-08 Tim Harveyimx: ventana: update MMC env configuration
2015-09-08 Tim Harveythermal: imx_thermal: increase critical temperature...
2015-09-08 Heiko Schocherarm, imx6: add support for aristainetos2 board
2015-09-08 Heiko Schocheri2c, mxc: rework i2c base address names for different...
2015-09-08 Heiko Schocherarm, imx6, i2c: add I2C4 for MX6DL
2015-09-08 Peng Fanimx: dma: correct MXS_DMA_ALIGNMENT
2015-09-08 Axel Linpwm: imx: Remove unreachable code
2015-09-08 Axel Linpwm: imx: Prevent NULL pointer dereference
2015-09-08 Masahiro YamadaARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZ...
2015-09-08 Masahiro YamadaARM: zynq: add separate configuration for ZC702 and...
2015-09-08 Michal Simekzynq: Use system timer implementation instead of our
2015-09-08 Stefan Agnermtd: vf610_nfc: enable ONFI detection
2015-09-08 Stefan Agnermtd: vf610_nfc: add 32-error correction option for...
next