]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2015-01-16 Shawn GuoARM: imx: add low-level debug support for imx6sx
2015-01-16 Anson Huangpinctrl: add pinctrl driver for imx6sx
2015-01-16 Gilles ChanteperdrixARM: imx: factor device tree timer initialization
2015-01-16 Huang ShijieENGR00300890-1 mtd: fix the build error
2015-01-16 Huang Shijieserial: imx: disable the receiver ready interrupt for...
2015-01-16 Huang Shijieserial: imx: remove the redundant code
2015-01-16 Huang Shijieserial: imx: reset the uart port all the time
2015-01-16 Fabio Estevamserial: imx: Disable new features of autobaud detection
2015-01-16 Alexander Shiyanserial: imx: Remove init() and exit() platform callbacks
2015-01-16 Alexander Shiyanserial: imx: Use dev_name() for request_irq() to distin...
2015-01-16 Alexander Shiyanserial: imx: Use devm_ioremap_resource()
2015-01-16 Huang Shijieserial: imx: always wake up the processes in the TX...
2015-01-16 Huang ShijieARM: clk: imx: remove the CLK_SET_RATE_NO_REPARENT...
2015-01-16 Huang Shijiemtd: nand: add "page" argument for read_subpage hook
2015-01-16 Huang Shijiemtd: gpmi: add gpmi support for imx6sx
2015-01-16 Huang Shijiemtd: gpmi: add gpmi_devdata{} to simplify the code
2015-01-16 Huang Shijiemtd: gpmi: add subpage read support
2015-01-16 Huang Shijiemtd: gpmi: do not use the mtd->writesize
2015-01-16 Brian NorrisARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependenc...
2015-01-16 Brian NorrisDocumentation: spi-nor: rewrite some portions
2015-01-16 Geert Uytterhoevenmtd: spi-nor: Enable Dual and Quad SPI read transfers...
2015-01-16 Brian Norrismtd: spi-nor: unify read opcode variants with ST SPI FSM
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Huang Shijiemtd: spi-nor: add the copyright information
2015-01-16 Brian Norrismtd: spi-nor: EXPORT symbols which could be used by...
2015-01-16 Brian Norrismtd: fsl-quadspi: fix __iomem annotations
2015-01-16 Brian Norrismtd: spi-nor: unify read opcode variants with ST SPI FSM
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Brian Norrismtd: spi-nor: unify read opcode variants with ST SPI FSM
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Brian Norrismtd: spi-nor: drop \t after #define
2015-01-16 Huang Shijiemtd: spi-nor: Add Freescale QuadSPI driver
2015-01-16 Huang ShijieDocumentation: add the binding file for Freescale QuadS...
2015-01-16 Huang Shijiemtd: spi-nor: add a helper to find the spi_device_id
2015-01-16 Huang ShijieDocumentation: add the document for the SPI NOR framework
2015-01-16 Huang Shijiemtd: spi-nor: add the framework for SPI NOR
2015-01-16 Huang Shijiemtd: spi-nor: add the basic data structures
2015-01-16 Huang Shijiemtd: spi-nor: copy the SPI NOR commands to a new header...
2015-01-16 Geert Uytterhoevenmtd: m25p80: Revive dual read support
2015-01-16 Brian Norrismtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*
2015-01-16 Brian Norrismtd: m25p80: use the SPI nor framework
2015-01-16 Brian Norrismtd: m25p80: add Macronix mx66l1g55g 1Gbit SPI flash
2015-01-16 Kuninori Morimotomtd: m25p80: add support for the Spansion s25fl008k...
2015-01-16 Axel Linmtd: m25p80: Use positive logic to check JEDEC ID
2015-01-16 Paul Gortmakermtd: delete non-required instances of include <linux...
2015-01-16 Geert Uytterhoevenmtd: m25p80: Enable Dual SPI read transfers for s25fl25...
2015-01-16 Geert Uytterhoevenmtd: m25p80: Add dual read support
2015-01-16 Shawn GuoENGR00269945: ARM: dts: add max7310 support for imx6qdl...
2015-01-16 Shawn GuoENGR00269945: pinctrl: support pinctrl setting assertio...
2015-01-16 Shawn GuoENGR00269945: gpio: pca953x: add device_reset() call
2015-01-16 Shawn GuoENGR00269945: select ARCH_HAS_RESET_CONTROLLER for IMX
2015-01-16 Shawn GuoENGR00269945: reset: add dummy device_reset() for ...
2015-01-16 Shawn GuoENGR00269945: reset: build in CONFIG_RESET_GPIO by...
2015-01-16 Shawn GuoENGR00269945: reset: register gpio-reset driver in...
2015-01-16 Philipp Zabelreset: Add driver for gpio-controlled reset pins
2015-01-16 Shawn GuoENGR00317981: ARM: add imx_v7_defconfig
2015-01-16 Shawn GuoENGR00240988: ARM: dts: add gpu nodes for imx6q and...
2015-01-16 Shawn GuoENGR00240988: ARM: imx6q: add dma_zone_size for GPU...
2015-01-16 Loren HUANGENGR00240988: ARM: imx6q: add gpu clock initialzatin...
2015-01-16 Shawn GuoENGR00317981: gpu-viv: use runtime pm for VDDPU management
2015-01-16 Philipp ZabelARM: dts: imx6qdl: Allow disabling the PU regulator...
2015-01-16 Philipp ZabelARM: dts: imx6sl: Add power-domain information to gpc...
2015-01-16 Philipp ZabelARM: dts: imx6qdl: Add power-domain information to...
2015-01-16 Philipp ZabelARM: imx6: gpc: Add PU power domain for GPU/VPU
2015-01-16 Philipp ZabelDocumentation: Add device tree bindings for Freescale...
2015-01-16 Tomasz Figadrivercore: Bind/unbind power domain on probe/remove
2015-01-16 Tomasz Figabase: power: Add generic OF-based power domain look-up
2015-01-16 Shawn GuoENGR00317981: regulator: anatop: force vddpu to use...
2015-01-16 Axel Linregulator: anatop: Remove checking control_reg in ...
2015-01-16 Philipp Zabelregulator: anatop: Add bypass support to digital LDOs
2015-01-16 Philipp Zabelregulator: anatop: Add power gating support to digital...
2015-01-16 Shawn GuoENGR00317981: ARM: dts: imx6qdl: add LDB and LCD for...
2015-01-16 Liu YingENGR00274172-1 ARM: imx6q: refactor some ldb related...
2015-01-16 Shawn GuoENGR00317981: ARM: imx6qdl: initialize IPU clocks
2015-01-16 Shawn GuoARM: dts: imx6qdl: use DT macro for clock ID
2015-01-16 Shawn GuoARM: imx6qdl: switch to use macro for clock ID
2015-01-16 Iain PatonARM: dts: imx6: i2c4 cleanup
2015-01-16 Iain PatonARM: imx6: clk: i.MX6 DualLite/Solo i2c4 clock
2015-01-16 Sascha HauerARM: imx6q: clk: Parent DI clocks to video PLL via...
2015-01-16 Shawn GuoARM: imx6q: add the missing esai_ahb clock
2015-01-16 Shawn GuoENGR00317981: media: mxc_pxp_v4l2: change __s32 to...
2015-01-16 Shawn GuoENGR00317981: media: forward mxc video output drivers...
2015-01-16 Liu YingENGR00268508 backlight:Correct the setting for bd props...
2015-01-16 Liu YingENGR00264855 backlight: Support backlight shared by...
2015-01-16 Shawn GuoENGR00317981: iomuxc-gpr: forward imx6q-iomuxc-gpr...
2015-01-16 Shawn GuoENGR00317981: video: forward mxc video drivers to 3...
2015-01-16 Shawn GuoENGR00317981: mfd: forward mxc hdmi mfd driver to 3...
2015-01-16 Robby CaiENGR00275031-1 mx6sl fb: support lcdif framebuffer...
2015-01-16 Shawn GuoENGR00317981: pxp: use DMA_COMPLETE for dma completion...
2015-01-16 Shawn GuoENGR00317981: pxp: forward pxp driver to 3.14 kernel
2015-01-16 Shawn GuoENGR00317981: drm: vivante: drm_platform_exit is gone
2015-01-16 Shawn GuoENGR00317981: drm: set drm_device pointer into drvdata
2015-01-16 Shawn GuoENGR00317981: drm: vivante: flag DRIVER_USE_MTRR is...
2015-01-16 Shawn GuoENGR00317981: drm: vivante: drm_fasync is gone
2015-01-16 Shawn GuoENGR00317981: drm: forward vivante driver to 3.14 kernel
2015-01-16 Shawn GuoENGR00317981: gpu-viv: use reinit_completion instead...
2015-01-16 Shawn GuoENGR00317981: mxc: forward mxc drivers to 3.14 kernel
2015-01-16 Anson HuangENGR00275542-4 ARM: imx: Enable thermal driver for...
2015-01-16 Anson HuangARM: dts: imx6qdl: add necessary thermal clk
2015-01-16 Anson Huangthermal: imx: update formula for thermal sensor
next