]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2014-06-09 Alexander ShiyanARM: i.MX: Use of_clk_get_by_name() for timer clocks...
2014-06-03 Huang ShijieARM: clk: imx: remove the CLK_SET_RATE_NO_REPARENT...
2014-06-03 Fabio EstevamARM: imx: defconfig: Select CONFIG_FHANDLE
2014-06-03 Shawn GuoARM: imx5: remove mx51.h and mx53.h
2014-06-03 Shawn GuoARM: imx5: clean function declarations in mx51.h
2014-06-03 Shawn GuoARM: imx5: remove file mm-imx5.c
2014-06-03 Shawn GuoARM: imx5: move init hooks into mach-imx5x.c
2014-06-03 Shawn GuoARM: imx5: use dynamic mapping for Cortex and GPC block
2014-06-03 Shawn GuoARM: imx5: reuse clock CCM mapping in pm code
2014-06-03 Shawn GuoARM: imx5: use dynamic mapping for DPLL block
2014-06-03 Shawn GuoARM: imx5: use dynamic mapping for CCM block
2014-06-03 Shawn GuoARM: imx5: remove header crm-regs-imx5.h
2014-06-03 Shawn GuoARM: imx5: retrieve iim base from device tree
2014-06-03 Shawn GuoARM: imx5: call mxc_timer_init_dt() on imx51
2014-06-03 Shawn GuoARM: imx5: remove function imx51_soc_init()
2014-06-03 Shawn GuoARM: imx5: tzic_init_irq() can directly be .init_irq...
2014-06-03 Shawn GuoARM: imx5: drop arguments from mx5_clocks_common_init()
2014-06-03 Shawn GuoARM: imx5: make mx51_clocks_init() a DT call
2014-06-03 Shawn GuoARM: imx5: remove i.MX5 non-DT device registration...
2014-06-03 Shawn GuoARM: imx5: remove imx51 non-DT support files
2014-06-03 Shawn GuoARM: imx5: drop option MACH_IMX51_DT
2014-06-03 Shawn GuoARM: imx5: move SOC_IMX5 and SOC_IMX51 into 'Device...
2014-06-03 Shawn GuoARM: imx: move EHCI platform defines out of platform_da...
2014-06-03 Alexander ShiyanARM: i.MX: Remove registration helper for i.MX1 USB UDC
2014-05-21 Alexander ShiyanARM: i.MX1 clk: Add devicetree support
2014-05-19 Paul BolleARM: imx: remove unused defines
2014-05-19 Alexander ShiyanARM: i.MX: Select HAVE_IMX_SRC for i.MX5 globally
2014-05-18 Shawn GuoMerge tag 'imx-dt-3.16' into staging-3.16
2014-05-18 Shawn GuoMerge tag 'imx-soc-3.16' into staging-3.16
2014-05-16 Fabio EstevamARM: dts: imx35-pdk: Fix memory region description
2014-05-16 Fabio EstevamARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN...
2014-05-16 Iain PatonARM: dts: imx6: add new board RIoTboard
2014-05-16 Iain PatonARM: dts: imx6: i2c4 cleanup
2014-05-16 Silvio FrickeARM: dts: imx6: edmqmx6: add vcc and vio power supplies...
2014-05-16 Sascha HauerARM: dts: Karo TX25: use hardware ecc
2014-05-16 Sascha HauerARM: dts: Karo TX25: Add phy reset gpio and supply...
2014-05-16 Sascha HauerARM: dts: Karo TX25: Add pinctrl nodes
2014-05-16 Sascha HauerARM: dts: i.MX25: Add IRAM node
2014-05-16 Sascha HauerARM: dts: i.MX25: Add mmc aliases
2014-05-16 Sascha HauerARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
2014-05-16 Fabio EstevamARM: dts: imx6qdl-sabresd: Add USDHC4 support
2014-05-16 Russell KingARM: imx: add HDMI support for SolidRun HummingBoard...
2014-05-16 Lucas StachARM: dts: imx6: edmqmx6: add SPI bus and flash
2014-05-16 Lucas StachARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq...
2014-05-16 Fabio EstevamARM: dts: imx6q-udoo: Add HDMI support
2014-05-16 Sascha HauerARM: dts: Add stdout-path property to i.MX boards
2014-05-16 Tim HarveyARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
2014-05-16 Tim HarveyARM: dts: imx: add LVDS backlight for Ventana
2014-05-16 Lucas StachARM: dts: imx6qdl-sabresd: remove power-on gpio from...
2014-05-16 Lucas StachARM: dts: imx6: update pcie to bring in line with new...
2014-05-16 Fabio EstevamARM: dts: imx53-qsb-common: Add TVE support
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property...
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add CSI enable...
2014-05-16 Alexander ShiyanARM: dts: imx: Remove excess entries for PMIC
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Disable PM pins...
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Fix active level...
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Remove duplicate...
2014-05-16 Tim HarveyARM: dts: ventana: Add HDMI support
2014-05-16 Marek VasutARM: dts: imx6qdl-sabresd: Add PCIe support
2014-05-16 Fabio EstevamARM: dts: imx6qdl-wandboard: Add HDMI support
2014-05-16 Fabio EstevamARM: dts: imx6qdl-sabresd: Add HDMI support
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add keypad support
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add NAND support
2014-05-16 Philipp ZabelARM: dts: imx6q-gk802: Enable HDMI
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add USB OTG support
2014-05-16 Fabio EstevamARM: dts: imx27: Place the usb phy nodes in the board...
2014-05-16 Fabio EstevamARM: dts: imx27: Use the correct usb clock gate
2014-05-16 Fabio EstevamARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO...
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add PMIC support
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Use predefined constants for...
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Add devicetree node for I2C1
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Sort nodes by name
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Add USB OTG regulator node
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Use predefined constants for...
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Add missing pingroup for PMIC
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Move "hog" pins into correspon...
2014-05-16 Alexander ShiyanARM: dts: i.MX51: Allow to define partitions onto NFC
2014-05-16 Philipp ZabelARM: dts: pbab01: Enable DVI
2014-05-16 Philipp ZabelARM: dts: pbab01: Enable UART1
2014-05-16 Philipp ZabelARM: dts: pfla02: Add UART1 (uart3)
2014-05-16 Philipp ZabelARM: dts: pbab01: Add I2C devices
2014-05-16 Philipp ZabelARM: dts: pbab01: Add I2C2 and I2C3
2014-05-16 Philipp ZabelARM: dts: pbab01: Set linux,stdout-path to UART4
2014-05-16 Philipp ZabelARM: dts: pfla02: PHY reset is active-low
2014-05-16 Philipp ZabelARM: dts: pfla02: Add GPIO LEDs
2014-05-16 Philipp ZabelARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
2014-05-16 Philipp ZabelARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Pass the FEC pin configuration
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Keep the dt nodes sorted
2014-05-16 Alexander ShiyanARM i.MX51: Add Digi ConnectCore devicetree
2014-05-16 Alexander ShiyanARM: dts: i.MX: Use single naming style for i.MX WEIM...
2014-05-16 Denis CarikliARM: dts: cpuimx51 Add touchscreen support.
2014-05-16 Denis CarikliARM: dts: cpuimx35 Add touchscreen support.
2014-05-16 Denis CarikliARM: dts: mbimxsd51 baseboard: Add USB support.
2014-05-16 Stefan AgnerARM: dts: add initial Colibri VF61 board support
2014-05-16 Stefan Agnerof: add vendor prefix for Toradex AG
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Pass the memory range
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add display control...
2014-05-16 Michael HeimpoldARM: dts: imx28-duckbill: use symbolic names from gpio.h
next