]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add pingrp for...
2013-12-31 Alexander ShiyanARM: dts: i.MX27: Add missing pullup settings for SDHC...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Add spi-cs-high...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Add NFC pin group
2013-12-31 Troy KiskyARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
2013-12-31 Troy KiskyARM: dts: imx6qdl: use interrupts-extended for fec
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGM...
2013-12-31 Troy KiskyARM: dts: imx6qdl: add pingroups for enet with GPIO6...
2013-12-31 Troy KiskyARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
2013-12-31 Philipp ZabelARM: dts: imx6q-sabrelite: PHY reset is active-low
2013-12-31 Fabio EstevamARM: dts: imx6: Use 'vddarm' as the regulator name
2013-12-31 Anson HuangARM: dts: imx6qdl-sabresd: Add power key support
2013-12-31 John TobiasARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU...
2013-12-31 Steffen TrumtrarARM: dts: Add support for the i.MX35.
2013-12-31 Anson HuangARM: dts: imx6qdl: add necessary thermal clk
2013-12-31 Anson HuangARM: dts: imx6dl: enable cpufreq support
2013-12-31 Anson HuangARM: dts: imx6q: add vddsoc/pu setpoint info
2013-12-31 Anson HuangARM: dts: imx6q: update setting of VDDARM_CAP voltage
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: add gpio-keys
2013-12-31 Alexandre BelloniARM: dts: mxs: Add iio-hwmon to mx23 soc
2013-12-31 Alexandre BelloniARM: dts: mxs: Add iio-hwmon to mx28 soc
2013-12-31 Russell KingARM: imx: initial SolidRun HummingBoard support
2013-12-31 Troy KiskyARM: dts: imx: add nitrogen6x board
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: Add over-current pin to...
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: fix ENET group
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: add skews for Micrel phy
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: add pwms for backlights
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: explicitly set pad for...
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: move usbotg power enable...
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl...
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinct...
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_...
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabre...
2013-12-31 Nicolin ChenARM: dts: imx6qdl: add spdif support for sabreauto
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio
2013-12-31 Troy KiskyARM: dts: imx6qdl-sabrelite: Add uart1 support
2013-12-31 Troy KiskyARM: dts: imx: sabrelite: add Dual Lite/Solo support
2013-12-31 Lothar WaßmannARM: dts: imx6qdl: add new pingroup for audmux
2013-12-31 Lothar WaßmannARM: dts: imx6qdl: add pingroup for enet interface...
2013-12-31 Lothar WaßmannARM: dts: imx6qdl: add aliases for can interfaces
2013-12-31 Marek VasutARM: dts: imx6q-sabrelite: Enable PCI express
2013-12-31 Shawn GuoARM: dts: vf610: make pinctrl nodes board specific
2013-12-31 Denis CarikliARM: dts: mbimxsd51: Add sound support.
2013-12-31 Denis CarikliARM: dts: mbimxsd25: Add sound support.
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Rename file to...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Add pinctrl for...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: trivial: Typo fix
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Change pinctrl...
2013-12-31 Alexander ShiyanARM: dts: i.MX: Move include "imxXX-pinfunc.h" into...
2013-12-31 Alexandre BelloniARM: dts: mxs: add #io-channel-cells to mx28 lradc
2013-12-31 Michael GrzeschikARM: i.MX28: dts: rename usbphy pin names
2013-12-31 Denis CarikliARM: dts: Add support for the cpuimx25 board from Eukre...
2013-12-31 Eric BénardARM: mxs: Add support for the eukrea-cpuimx28.
2013-12-31 Denis CarikliARM: dts: mxs: Add a new pin config for the usb0 ID.
2013-12-31 Denis CarikliARM: dts: mxs: Add 18bit pin config for lcdif.
2013-12-31 Robert NelsonARM: dts: imx53: Enable AHCI SATA for imx53-qsb
2013-12-31 Alexander ShiyanARM: dts: i.MX27: Configure GPIOs as "input" by default
2013-12-31 Gwenhael Goavec... ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci...
2013-12-31 Gwenhael Goavec... ARM: dts: apf27dev: Add pwm support
2013-12-31 Gwenhael Goavec... ARM: imx27: add pwm pingrp
2013-12-31 Gwenhael Goavec... ARM: imx28: add apf28 specific initialization (macaddr)
2013-12-31 Gwenhael Goavec... ARM: dts: apf28dev: set gpio polarity for usb regulator...
2013-12-31 Alexander ShiyanARM: dts: i.MX27 boards: Switch to use standard GPIO...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Update FEC node
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add DT node for...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Add on-flash BBT...
2013-12-31 Gwenhael Goavec... ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi...
2013-12-31 Gwenhael Goavec... ARM: dts: imx27: imx27-apf27: add pinctrl for fec and...
2013-12-31 Gwenhael Goavec... ARM: imx27: add pingroups for cspi, sdhc and framebuffer
2013-12-31 Alexander ShiyanARM: dts: imx51-babbage: Define FEC reset pin
2013-12-31 Alexander ShiyanARM: dts: imx51-babbage: Fix chipselect level for dataf...
2013-12-31 Rostislav LisovyARM: i.MX53: dts: USB host controller
2013-12-31 Rostislav LisovyARM: i.MX53: dts: NAND flash controller
2013-12-31 Fabio EstevamARM: dts: imx28-evk: Run I2C0 at 400kHz
2013-12-31 Gwenhael Goavec... ARM: dts: imx27-apf27dev: fix display size
2013-12-31 Markus PargmannARM: dts: imx27 phycore pinctrl
2013-12-31 Markus PargmannARM: dts: imx27 phycore move uart1 to rdk
2013-12-31 Markus PargmannARM: dts: imx27 phyCARD-S pinctrl
2013-12-31 Markus PargmannARM: dts: imx27 iomux device node
2013-12-31 Marek VasutARM: dts: imx53: Enable AHCI SATA for M53EVK
2013-12-31 Marek VasutARM: dts: imx53: Add AHCI SATA DT node
2013-12-31 Troy KiskyARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx...
2013-12-31 Fabio EstevamARM: dts: imx6q-sabrelite: Place 'status' as the last...
2013-12-31 Alexander ShiyanARM: dts: i.MX51 boards: Switch to use standard GPIO...
2013-12-31 Alexander ShiyanARM: dts: i.MX51: Move usbphy0 node from AIPS1
2013-12-31 Maxime RipardARM: dts: cfa10036: Add dr_mode and phy_type properties...
2013-12-31 Maxime RipardARM: mxs: cfa10049: Add NAU7802 ADCs to the device...
2013-12-31 Marek VasutARM: dts: imx53: Add USB support for M53EVK
2013-12-31 Marek VasutARM: dts: imx53: Fix backlight for M53EVK
2013-12-31 Marek VasutARM: dts: imx53: Fix display pinmux for M53EVK
2013-12-31 Troy KiskyARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag
2013-12-31 Troy KiskyARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_...
next