]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-09-08 Bin Mengx86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86...
2015-09-08 Bin Mengx86: Make QEMU the default vendor
2015-09-08 Bin Mengx86: Support QEMU x86 targets
2015-09-08 Bin Mengpci: Move pci_hose_phys_to_bus() to pci_common.c
2015-09-08 Hannes Schmelzerboard/BuR/common: fix netconsole
2015-09-08 Lars Poeschelconfigs: remove CONFIG_NET_MULTI
2015-09-08 Lars PoeschelARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ
2015-09-08 Michal Simeknet: Fix NET_RANDOM_ETHADDR dependencies
2015-09-08 Joe Hershbergernet: Move the CMD_NET config to defconfigs
2015-09-08 Joe HershbergerMove setexpr to Kconfig
2015-09-08 Masahiro Yamadablackfin: fix build error on bct-brettl2 board
2015-09-08 Masahiro Yamadasparc: fix build error on gr_ep2s60 board
2015-09-08 Markus Niebelarm: mx6: tqma6: use default CONFIG_SYS_PBSIZE
2015-09-08 Markus Niebelarm: mx6: tqma6: fix spelling error in condition
2015-09-08 Tim Harveyimx: ventana: skip mtdparts fixup if no flash
2015-09-08 Tim Harveyimx: ventana: hang if board model could not be determined
2015-09-08 Tim Harveyimx: ventana: make fdt_file1 and fdt_file2 automatic...
2015-09-08 Tim Harveyimx: ventana: make model env var automatic and non...
2015-09-08 Tim Harveyimx: ventana: various board-specific GPIO config updates
2015-09-08 Stefan Wahrenmxs: Do not disable bo detection when DC-DC is already...
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: alt: Update to QoS revision 0.31 and...
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: gose: Update to QoS revision 0.311
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: koelsch: Update to QoS revision 0.411
2015-09-08 Nobuhiro Iwamatsuarm: rmobile: lager: Update to QoS revision 0.973
2015-09-08 Mitsuhiro Kimuraarm: rmobile: alt: Add ethernet function B support
2015-09-08 Masahiro YamadaARM: UniPhier: add pin mux setting for NAND CS1 of...
2015-09-08 Masahiro YamadaARM: UniPhier: fix pin mux setting for USB port 2 of...
2015-09-08 Masahiro YamadaARM: UniPhier: update DDR PHY register map for PH1...
2015-09-08 Masahiro YamadaARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR
2015-09-08 Masahiro YamadaARM: UniPhier: set MACH_PH1_PRO4 as default SoC
2015-09-08 Masahiro YamadaARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig
2015-09-08 Masahiro YamadaARM: UniPhier: remove meaningless CONFIG_SPL_BUILD...
2015-09-08 Masahiro YamadaARM: UniPhier: remove unnecessary cache coherency code
2015-09-08 Masahiro YamadaARM: UniPhier: use 32 bit register access for debug...
2015-09-08 Masahiro YamadaARM: UniPhier: update the vendor name of UniPhier in...
2015-09-08 Masahiro YamadaARM: UniPhier: replace <asm/io.h> with <linux/io.h>
2015-09-08 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun8i
2015-09-08 Chen-Yu TsaiARM: sunxi: Share sun6i PSCI backend with sun8i
2015-09-08 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun6i
2015-09-08 Chen-Yu TsaiARM: sunxi: Add sun6i specific PSCI implementation
2015-09-08 Chen-Yu TsaiARM: sunxi: Make PSCI code sun7i specific
2015-09-08 Chen-Yu TsaiARM: sunxi: Document registers in PSCI code
2015-09-08 Daniel Kochmańskisunxi/nand: Add support to the SPL for loading u-boot...
2015-09-08 Roy Splietsunxi: Match sun4i, sun6i, sun9i CCI definitions for...
2015-09-08 Roy Splietsunxi: Add DMA definitions
2015-09-08 Daniel Kochmańskisunxi/nand: change BLOCK_SIZE in mksunxiboot to match...
2015-09-08 Hans de Goedesun9i: Add Merrii_A80_Optimus board / defconfig file
2015-09-08 Hans de Goedesun9i: Basic sun9i (A80) support
2015-09-08 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-09-08 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-09-08 Hans de Goedesunxi: Remove support for building "old-fashioned"...
2015-09-08 Hans de Goedesunxi: Use axp221 sid on a33
2015-09-08 Hans de Goedeusb: kbd: Fix key repeat not always working
2015-09-08 Peter Griffinusb: dwc2: Add support for v3 snpsid value
2015-09-08 Siva Durga... ci_udc: Update the ci_udc driver to support bulk transfers
2015-09-08 Hans de Goedeusb: Remove unused variable in usb_setup_descriptor()
2015-09-08 Hannes Schmelzercosmetic: change Author/MAINTAINER Name from Petermaier...
2015-09-08 Heiko Schocheram33xx, spl, siemens: enable debug uart output again
2015-09-08 Joe Hershbergernet: Fix a warning added by 76ec988
2015-09-08 Tang Yuantianfsl/sata: Replace sprintf() with snprintf()
2015-09-08 Matt Portergpio: stm32: add stm32f1 support
2015-09-08 Matt PorterARMv7M: add STM32F1 support
2015-09-08 Matt Portercommon/cmd_boot: keep ARM v7M in thumb mode during...
2015-09-08 Matt Porterimage: fix build when CONFIG_NR_DRAM_BANKS is disabled...
2015-09-08 Marek VasutARM: bcm283x: Switch to generic timer
2015-09-08 Marek VasutARM: bcm283x: Reorder timer.h
2015-09-08 Marek VasutARM: bcm283x: Repair wdog.h
2015-09-08 Linus Walleijvexpress64: use uncompressed kernel by default
2015-09-08 Masahiro Yamadakbuild: define DO_DEPS_ONLY for u-boot.cfg to fix build...
2015-09-08 Andrew Bradfordmeminfo cmd: Enable printing >=4GiB SDRAM sizes
2015-09-08 Paul Kocialkowskispl: spl_mmc: Error and count distinction
2015-09-08 Karl Apsiteadd test for two 'loadables'
2015-09-08 Karl ApsiteCombine bootm_find_<thing> functions together
2015-09-08 Karl Apsiteadd boot_get_loadables() to load listed images
2015-09-08 Karl Apsitemkimage will now report information about loadable
2015-09-08 Masahiro Yamadapowerpc: gitignore: ignore PowerPC DTBs
2015-09-08 Thomas Petazzonitools: use pkg-config when available to get SSL flags
2015-09-08 Masahiro Yamadainclude: introduce include/linux/io.h as a wrapper...
2015-09-08 Linus Walleijvexpress64: let Juno wait for root device
2015-09-08 Evgeniy Dushistovbeagle-xm: gpio_63 fix wrong pin initialization
2015-09-08 Ricardo Ribaldappc: xilinx-ppc: Move to generic board support
2015-09-08 Fabio Estevamwarp: Fix the 'saveenv' command
2015-09-08 Fabio Estevamwarp: Add fuse command support
2015-09-08 Fabio Estevamwarp: Enable CONFIG_SUPPORT_EMMC_BOOT
2015-09-08 Fabio Estevamwarp: Fix CONFIG_SYS_FSL_ESDHC_ADDR
2015-09-08 Fabio Estevamwarp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE
2015-09-08 Tim Harveypci: imx: display message if no pcie link
2015-09-08 Stefano BabicRevert "imx: drop warning: unused variable 'max_freq'"
2015-09-08 Ricardo Ribaldadoc/README.generic-board: Trivial spell check
2015-09-08 Linus Walleijvexpress64: fix various memory issues
2015-09-08 Chris PackhamMakefile: Add U_BOOT_TZ and include in version
2015-09-08 Tim Harveypci: display header for bus scan
2015-09-08 Tim Harveyenv_mmc: add error message to pass to set_default_env
2015-09-08 Ryan Harkinvexpress64: specify CONFIG_SYS_FLASH_CFI_WIDTH
2015-09-08 Lokesh VutlaARM: BeagleBoard-x15: Rev A2x5: Change UART3 mux
2015-09-08 Tuomas Tynkkynenmenu: Return an error code if Ctrl-C is pressed
2015-09-08 Tuomas Tynkkynenpxe: Fix crash if 'sysboot' is run without args
2015-09-08 Tom RiniRevert "Revert "stm32f4: fix serial output""
2015-09-08 Stefano Babicimx: drop warning: unused variable 'max_freq'
2015-09-08 Joe Hershbergermoveconfig: Print status about the processed defconfigs
next