]> git.karo-electronics.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2014-10-24 Lothar WaßmannMerge branch 'tx53-1232'
2014-10-24 Lothar WaßmannMerge branch 'tx53-video_mode'
2014-10-24 Lothar Waßmannconfigs: tx53: set default video_mode depending on...
2014-10-24 Lothar Waßmannkaro: tx53: add support for TX53-1232 (2GiB SDRAM)
2014-10-24 Lothar Waßmannkaro: tx53: configure SDRAM size via boards.cfg
2014-10-24 Lothar Waßmannconfigs: tx53: indentation cleanup
2014-10-24 Lothar Waßmannkaro: tx53: make adjust_core-voltage() less verbose
2014-09-16 Lothar Waßmannkaro: tx53: improve workaround for i.MX53 ROM code bug tx53-bugfix
2014-09-10 Lothar Waßmannkaro: tx28: fix CONFIG_BOOTARGS and CONFIG_BOOTCOMMAND... KARO-TX28-2014-09-10
2014-09-03 Lothar Waßmannmmc: mxs: configure DMA timeout depending on xfer rate...
2014-09-03 Lothar WaßmannMX28: DMA: make the DMA timeout configurable
2014-09-03 Lothar WaßmannMX28: DMA: make mxs_dma_flush_desc() static
2014-09-03 Lothar Waßmannkaro: bootce: add option '-i' to bootce command to...
2014-09-03 Lothar Waßmannkaro: tx28: fix build error with 'CONFIG_ENV_IS_IN_MMC'
2014-09-03 Lothar Waßmannkaro: tx28: add configurations for U-Boot ignoring...
2014-09-03 Lothar Waßmannkaro: tx28: add support for TX28-4033 (with 256MiB...
2014-09-03 Lothar Waßmannkaro: tx28: add support for 'boot_mode' variable
2014-09-03 Lothar Waßmannkaro: tx28: change default loadaddr for TX28S
2014-09-03 Lothar Waßmannkaro: tx28: change FDT addr to be in low memory
2014-09-03 Lothar Waßmannkaro: tx28: cleanup config file
2014-08-27 Sergey Alyoshinam33xx: report silicon revision instead of code KARO-TX-2014-08-27
2014-08-25 Lothar Waßmannkaro: tx48: remove the 'interrupts' property from LTC35...
2014-08-25 Lothar Waßmannkaro: tx48: make sure I2C pads are high upon boot
2014-08-25 Lothar Waßmannkaro: tx48: only print message about cpu_clk, if it...
2014-08-25 Lothar Waßmannkaro: tx48: fix label for CD GPIO
2014-08-25 Lothar Waßmannkaro: tx48: remove 'with FDT support' from "Board:...
2014-08-25 Lothar Waßmanngpio: am33xx: add missing gpio_get_value() function
2014-08-25 Lothar Waßmanngpio: am33xx: print error messages for invalid GPIO...
2014-08-25 Lothar Waßmannam33xx: don't print clock settings on boot
2014-08-25 Lothar Waßmannkaro: fdt: fix karo_fdt_del_prop() function
2014-08-14 Lothar Waßmannkaro: tx53: change drive strength of DDR control lines KARO-TX-2014-08-21 KARO-TX53-2014-08-15
2014-08-14 Lothar Waßmannkaro: tx53: fix DDR_SEL value
2014-08-14 Lothar Waßmannkaro: tx53: clear persistent bits in lpgr upon boot
2014-08-14 Lothar Waßmannkaro: tx53: add 'romupdate' command to update the U...
2014-08-14 Lothar Waßmannkaro: tx53: prevent boot failure do to bad blocks insid...
2014-08-08 Lothar Waßmannkaro: tx51: increase ipg_per clock to 24MHz KARO-TX51-2014-08-08
2014-08-08 Lothar Waßmannkaro: tx51: remove duplicate CONFIG_SYS_SDRAM_CLK defin...
2014-08-08 Lothar Waßmannkaro: tx51: fix ipu clock setting
2014-08-08 Lothar Waßmannarm: mx5: print some more clocks in the 'clock' command
2014-08-08 Lothar Waßmannkaro: tx51: use .error asm instruction to print error...
2014-08-08 Lothar Waßmannkaro: tx51: init pad settings for SDRAM and NAND
2014-07-18 Lothar WaßmannMerge branch 'tx48-rel' KARO-TX-2014-07-18
2014-07-18 Lothar Waßmannfdt: karo: improve handling of usbotg phy
2014-07-18 Lothar Waßmannfdt: karo: make 'otg_mode' setting case insensitive
2014-07-17 Lothar Waßmannkaro: tx53: remove a bogus wait for CON_ACK to clear
2014-07-10 Lothar Waßmannmxs: change setup of exception vt KARO-TX-2014-07-10
2014-07-02 Lothar Waßmannarm: use a different stack setup macro for swi (copied...
2014-07-02 Lothar Waßmannkaro: set CONFIG_ARCH_MISC_INIT, so the exception VT...
2014-07-02 Lothar Waßmannarm: adjust PC displayed in exception handlers to point...
2014-06-30 Lothar Waßmannboard: karo: add 'ftd resize' to 'fdtsave' command
2014-06-30 Lothar Waßmannboard: karo: enable CONFIG_FAT_WRITE for all modules
2014-06-30 Lothar Waßmannboard: karo: make vbus-supply property name depend...
2014-06-30 Lothar WaßmannMerge remote-tracking branch 'remotes/origin/tx48-mmc...
2014-06-30 Lothar WaßmannMerge remote-tracking branch 'remotes/origin/tx28-bugfix'
2014-06-30 Lothar WaßmannMerge remote-tracking branch 'remotes/origin/tx6-bugfix'
2014-06-26 Lothar Waßmannboard: tx48: add MMC init code
2014-06-26 Lothar Waßmannarm: am33xx: define cpu_mmc_init() as weak symbol
2014-06-26 Lothar Waßmannmmc: omap_hsmmc: improve timeout checks in wait loops
2014-06-26 Lothar Waßmannmmc: omap_hsmmc: cleanup code
2014-06-26 Lothar Waßmannarm: am33xx: fix definition of MMC register addresses...
2014-06-26 Lothar Waßmannarm: am335x: fix bogus #ifndef CONFIG_OMAP_MMC_DEV_0
2014-06-16 Lothar WaßmannMerge branch 'tx6-bugfix'
2014-06-16 Lothar Waßmannkaro: tx6: actually use 'skip' parameter in tx6_prog_ub...
2014-06-16 Lothar Waßmannkaro: tx28: actually use 'skip' parameter in tx28_prog_...
2014-06-04 Lothar Waßmannkaro: unify mtd partitioning across all TX modules... KARO-TX-2014-06-04
2014-06-04 Lothar Waßmannkaro: tx6: eliminate multiple evaluation of artithmetic...
2014-06-04 Lothar Waßmannpost: remove redundant include of autoconf.mk which...
2014-06-03 Lothar WaßmannMerge branch 'tx51-bugfix'
2014-06-02 Lothar Waßmannkaro: tx51: enable arm_bus clock
2014-05-30 Lothar Waßmannkaro: tx53: enable tmax2 clock to make ESDHC2 interface...
2014-05-16 Lothar Waßmannadd support for TX6U-8012 KARO-TX-2014-05-29
2014-05-14 Lothar Waßmanndoc: karo: added description of boot_mode variable
2014-05-14 Lothar Waßmanndoc: karo: added description of boot_mode variable
2014-05-14 Lothar Waßmanndoc: karo: added description for TX6Q-1020
2014-05-14 Lothar WaßmannMerge branch 'tx6q-1020-devel'
2014-05-14 Lothar WaßmannMerge branch 'tx28-bugfix'
2014-05-13 Lothar Waßmannarm: karo: tx6: reference mmc root device by UUID
2014-04-28 Lothar Waßmannkaro: tx6: increase dtb partition size to allow for... KARO-TX6-2014-04-28
2014-04-28 Lothar Waßmannkaro: tx6: remove bootcmd_nand and set boot_mode to...
2014-04-25 Lothar Waßmannkaro: tx6: remove obsolete write levelling code
2014-04-25 Lothar Waßmannkaro: tx6: Finalize support for TX6Q-1020
2014-04-25 Lothar Waßmannkaro: tx6: lowlevel_init: various fixes for DDR calibration
2014-04-25 Lothar Waßmannkaro: tx6-1020: set DDR voltage to 1.5V
2014-04-25 Lothar Waßmannkaro: tx6: use _LP voltage settings for low power mode...
2014-04-25 Lothar Waßmannkaro: tx6: lowlevel_init: simplify MXC_DCD_CMD_*()...
2014-04-15 Lothar Waßmannkaro: tx28: remove erroneous pad settings for LCD_HSYNC...
2014-04-09 Lothar WaßmannMerge remote-tracking branch 'remotes/tx6-devel/tx6... KARO-TX-2014-04-09
2014-04-09 Lothar WaßmannMerge remote-tracking branch 'remotes/tx53-devel/tx53...
2014-04-09 Lothar WaßmannMerge remote-tracking branch 'remotes/tx28-romupdate...
2014-04-09 Lothar Waßmannkaro: common: mmc: remove debug code
2014-04-09 Lothar Waßmannkaro: tx6: remove duplicate setup of LCD pads
2014-04-09 Lothar Waßmannkaro: tx6: romupdate: rework, so u-boot can be stored...
2014-04-09 Lothar Waßmannarm: mx5: clock: add support for changing CPU clock...
2014-04-09 Lothar Waßmannarm: mx5: clock: fix PLL_FREQ_MIN() calculation
2014-04-09 Lothar Waßmannarm: mx5: clock: improve accuracy of decode_pll()
2014-04-09 Lothar Waßmannarm: mx5: clock: adjust data types to avoid useless...
2014-04-09 Lothar Waßmannarm: mx5: add support for core voltage change when...
2014-04-09 Lothar Waßmannkaro: tx53: lowlevel_init: make sure ESDSCR[CON_REQ...
2014-04-09 Lothar Waßmannkaro: tx53: lowlevel_init: remove write calibration
2014-04-09 Lothar Waßmannkaro: tx53: lowlevel_init: simplify MXC_DCD_CMD_*(...
next