]> git.karo-electronics.de Git - karo-tx-linux.git/shortlog
karo-tx-linux.git
2013-12-31 Lothar WaßmannARM: dts: imx6qdl: add new pingroup for audmux
2013-12-31 Lothar WaßmannARM: dts: imx6qdl: add pingroup for enet interface...
2013-12-31 Lothar WaßmannARM: dts: imx6qdl: add aliases for can interfaces
2013-12-31 Marek VasutARM: dts: imx6q-sabrelite: Enable PCI express
2013-12-31 Shawn GuoARM: dts: vf610: make pinctrl nodes board specific
2013-12-31 Denis CarikliARM: dts: mbimxsd51: Add sound support.
2013-12-31 Denis CarikliARM: dts: mbimxsd25: Add sound support.
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Rename file to...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Add pinctrl for...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: trivial: Typo fix
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Change pinctrl...
2013-12-31 Alexander ShiyanARM: dts: i.MX: Move include "imxXX-pinfunc.h" into...
2013-12-31 Alexandre BelloniARM: dts: mxs: add #io-channel-cells to mx28 lradc
2013-12-31 Michael GrzeschikARM: i.MX28: dts: rename usbphy pin names
2013-12-31 Denis CarikliARM: dts: Add support for the cpuimx25 board from Eukre...
2013-12-31 Eric BénardARM: mxs: Add support for the eukrea-cpuimx28.
2013-12-31 Denis CarikliARM: dts: mxs: Add a new pin config for the usb0 ID.
2013-12-31 Denis CarikliARM: dts: mxs: Add 18bit pin config for lcdif.
2013-12-31 Robert NelsonARM: dts: imx53: Enable AHCI SATA for imx53-qsb
2013-12-31 Alexander ShiyanARM: dts: i.MX27: Configure GPIOs as "input" by default
2013-12-31 Gwenhael Goavec... ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci...
2013-12-31 Gwenhael Goavec... ARM: dts: apf27dev: Add pwm support
2013-12-31 Gwenhael Goavec... ARM: imx27: add pwm pingrp
2013-12-31 Gwenhael Goavec... ARM: imx28: add apf28 specific initialization (macaddr)
2013-12-31 Gwenhael Goavec... ARM: dts: apf28dev: set gpio polarity for usb regulator...
2013-12-31 Alexander ShiyanARM: dts: i.MX27 boards: Switch to use standard GPIO...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Update FEC node
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add DT node for...
2013-12-31 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Add on-flash BBT...
2013-12-31 Gwenhael Goavec... ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi...
2013-12-31 Gwenhael Goavec... ARM: dts: imx27: imx27-apf27: add pinctrl for fec and...
2013-12-31 Gwenhael Goavec... ARM: imx27: add pingroups for cspi, sdhc and framebuffer
2013-12-31 Alexander ShiyanARM: dts: imx51-babbage: Define FEC reset pin
2013-12-31 Alexander ShiyanARM: dts: imx51-babbage: Fix chipselect level for dataf...
2013-12-31 Rostislav LisovyARM: i.MX53: dts: USB host controller
2013-12-31 Rostislav LisovyARM: i.MX53: dts: NAND flash controller
2013-12-31 Fabio EstevamARM: dts: imx28-evk: Run I2C0 at 400kHz
2013-12-31 Gwenhael Goavec... ARM: dts: imx27-apf27dev: fix display size
2013-12-31 Markus PargmannARM: dts: imx27 phycore pinctrl
2013-12-31 Markus PargmannARM: dts: imx27 phycore move uart1 to rdk
2013-12-31 Markus PargmannARM: dts: imx27 phyCARD-S pinctrl
2013-12-31 Markus PargmannARM: dts: imx27 iomux device node
2013-12-31 Marek VasutARM: dts: imx53: Enable AHCI SATA for M53EVK
2013-12-31 Marek VasutARM: dts: imx53: Add AHCI SATA DT node
2013-12-31 Troy KiskyARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx...
2013-12-31 Fabio EstevamARM: dts: imx6q-sabrelite: Place 'status' as the last...
2013-12-31 Alexander ShiyanARM: dts: i.MX51 boards: Switch to use standard GPIO...
2013-12-31 Alexander ShiyanARM: dts: i.MX51: Move usbphy0 node from AIPS1
2013-12-31 Maxime RipardARM: dts: cfa10036: Add dr_mode and phy_type properties...
2013-12-31 Maxime RipardARM: mxs: cfa10049: Add NAU7802 ADCs to the device...
2013-12-31 Marek VasutARM: dts: imx53: Add USB support for M53EVK
2013-12-31 Marek VasutARM: dts: imx53: Fix backlight for M53EVK
2013-12-31 Marek VasutARM: dts: imx53: Fix display pinmux for M53EVK
2013-12-31 Troy KiskyARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH
2013-12-31 Troy KiskyARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag
2013-12-31 Troy KiskyARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_...
2013-12-31 Nicolin ChenARM: dts: imx: specify the value of audmux pinctrl...
2013-12-31 Lucas StachARM: imx50: use clock defines in DTS files
2013-12-31 Lucas StachARM: imx51: use clock defines in DTS files
2013-12-31 Lucas StachARM: imx53: use clock defines in DTS files
2013-12-31 Fabio EstevamARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry
2013-12-31 Fabio EstevamARM: dts: imx6q-udoo: Add Ethernet support
2013-12-31 Markus PargmannARM: dts: imx27 pingroups
2013-12-31 Markus PargmannARM: dts: imx27 pin functions
2013-12-31 Gwenhael Goavec... ARM: imx27-apf27dev: Add sdhci support
2013-12-31 Alexander ShiyanARM: dts: i.MX51: Switch to use standard IRQ flags...
2013-12-31 Alexander ShiyanARM: dts: i.MX51: Add dummy clock to AUDMUX
2013-12-31 Alexander ShiyanARM: dts: i.MX51: Update CPU node
2013-12-31 Michael HeimpoldARM: mxs: add support for I2SE's duckbill series
2013-12-31 Silvio FARM: dts: imx6: Add support for imx6q dmo edmqmx6
2013-12-31 Silvio FDT: Add Data Modul vendor prefix
2013-12-31 Denis CarikliARM: dts: imx25.dtsi: label the iomuxc.
2013-12-31 Denis CarikliARM: dts: imx25: Add pinctrl functions and groups.
2013-12-31 Shawn GuoARM: dts: imx: use generic node name for fixed regulator
2013-12-31 Shawn GuoARM: dts: imx53-mba53: create a container for fixed...
2013-12-31 Rostislav LisovyARM: dts: voipac: Improve fixed voltage regulator defin...
2013-12-31 Shawn GuoARM: dts: imx50: make pinctrl nodes board specific
2013-12-31 Shawn GuoARM: dts: imx51: make pinctrl nodes board specific
2013-12-31 Shawn GuoARM: dts: imx53: make pinctrl nodes board specific
2013-12-31 Shawn GuoARM: dts: imx6sl: make pinctrl nodes board specific
2013-12-31 Shawn GuoARM: dts: imx6qdl: make pinctrl nodes board specific
2013-12-31 Rostislav LisovyARM: dts: i.MX53: Devicetree for Voipac Baseboard using...
2013-12-31 Rostislav LisovyARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
2013-12-31 Rostislav LisovyARM: dts: Add vendor prefix for Voipac Technologies...
2013-12-31 Valentin RaevskyARM: dts: Add initial support for cm-fx6.
2013-12-31 Greg UngererARM: dts: imx: add device tree support for Freescale...
2013-12-31 Greg UngererARM: dts: imx: add IMX50 SoC device tree
2013-12-31 Greg UngererARM: dts: imx: add device tree pin definitions for...
2013-12-31 Peter ChenARM: dts: imx6q-arm2: enable USB OTG
2013-12-31 Denis CarikliARM: dts: Add support for the cpuimx51 board from Eukre...
2013-12-31 Denis CarikliARM: dts: imx51.dtsi: Add some pinmux pins.
2013-12-31 Denis CarikliARM: dts: imx25.dtsi: Add a label for the Audio Multipl...
2013-12-31 Denis CarikliARM: dts: i.MX25: Add sdma script path.
2013-12-31 Denis CarikliARM: dts: i.MX25: Add ssi clocks and DMA events.
2013-12-31 Denis Carikliof: add vendor prefix for Eukrea Electromatique.
2013-12-31 Aida MynzhasovaARM: dts: mxs: add auart2 pinmux to imx28.dtsi
2013-12-31 Tim HarveyARM: dts: add Gateworks Ventana support
next